Microchip Technology

LAN91C100FDTQFP - 10/100 Ethernet MAC Controller | Microchip

MPN: LAN91C100FDTQFP ✗ জীবনকালের সমাপ্তি
208-pin TQFP, 28 x 28 mm Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

LAN91C100FDTQFP সারাংশ

The Microchip Technology LAN91C100FDTQFP is a single-chip 10/100 Mb/s Ethernet Media Access Controller with an integrated Media Independent Interface, designed for first-generation Fast Ethernet adapters and embedded connectivity products. It is packaged in a 208-pin TQFP measuring 28 x 28 mm and uses CMOS technology. The controller supports IEEE 802.3 Ethernet operation, full-duplex capability, and an integrated 10/100 Ethernet MAC with MII connectivity.

An Ethernet MAC controller is an interface IC that manages frame transmission, reception, address filtering, and access to the physical network medium. In the product hierarchy, the LAN91C100FDTQFP belongs to Ethernet controllers, within interface ICs and semiconductors. Its MII provides a standardized digital connection to an external Ethernet PHY, allowing system designers to separate network-medium conversion from MAC processing while retaining flexibility in magnetics and transceiver selection.

Key characteristics include support for 10 Mb/s and 100 Mb/s Ethernet, IEEE 802.3 operation, full-duplex capability, commercial-temperature construction, and low-power shutdown. The MII interface makes the device suitable for embedded systems, industrial controllers, print servers, set-top equipment, and other legacy Fast Ethernet products that were designed around a dedicated MAC rather than an integrated Ethernet transceiver. Because the MAC does not include the physical-layer circuitry, the board still requires a compatible 10/100 Ethernet PHY and the associated magnetics and network interface components.

The LAN91C100FDTQFP was developed for first-generation Fast Ethernet adapter designs, where implementation flexibility and external PHY selection were priorities. Its 208-pin package provides a broad set of parallel host and MII signals, while the large lead count makes careful high-speed trace routing, plane use, and ground-return design important. The controller operates from a digital CMOS environment, and its shutdown capability can reduce power consumption when the attached system does not require continuous network connectivity.

Typical deployments include embedded industrial Ethernet equipment, legacy network adapters, printers, multifunction peripherals, embedded control systems, and purpose-built communication appliances. The controller is most appropriate when the host processor requires a dedicated Ethernet MAC but the product specification allows use of an external PHY. It is less attractive for new compact designs where an integrated MAC-and-PHY device would reduce board area, component count, and design effort.

For implementation, follow the pin-description and reference-circuit tables in the manufacturer datasheet when assigning every ball or lead and selecting bypass capacitance. Preserve continuous ground-plane returns beneath the high-speed MII and host interface paths, terminate unused inputs according to the device requirements, and validate signal integrity with the selected PHY and board stack-up. This product page combines device identification, interface guidance, comparison considerations, and sourcing support to support legacy Fast Ethernet design work.

এর জন্য ড্রপ-ইন বিকল্প LAN91C100FDTQFP — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই পণ্যের জন্য কোনো ড্রপ-ইন বিকল্প পাওয়া যায়নি।

বিকল্প অনুরোধ করুন

LAN91C100FDTQFP বিশেষণ

Ethernet Standard IEEE 802.3
Supported Data Rates 10 Mb/s and 100 Mb/s
Controller Type Non-PCI 10/100 Ethernet MAC
Host Interface MII
Duplex Support Full duplex
Process Technology CMOS
প্যাকেজ 208-pin TQFP, 28 x 28 mm
মাউন্টিং টাইপ Surface mount
Temperature Grade Commercial
Power Management Low-power shutdown mode
Number of Terminals 208

LAN91C100FDTQFP 208-pin tqfp, 28 x 28 mm পিন কনফিগারেশন গাইড

LAN91C100FDTQFP (208-pin tqfp, 28 x 28 mm প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

LAN91C100FDTQFP-এর জন্য 208-pin tqfp, 28 x 28 mm প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি LAN91C100FDTQFP.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

LAN91C100FDTQFP এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Embedded Industrial Ethernet Controller, Legacy Fast Ethernet Printer Interface, Industrial Communication Appliance, Set-Top and Network Access Equipment, Embedded Measurement and Control System, Legacy Network Adapter Expansion.

🏭

Embedded Industrial Ethernet Controller

The LAN91C100FDTQFP is appropriate for a legacy industrial controller that needs a dedicated 10/100 Mb/s Ethernet MAC while retaining freedom to select an external MII-compatible PHY. Its IEEE 802.3 support, full-duplex capability, and commercial temperature grade fit established control equipment operating from the specified commercial range. The controller handles the digital MAC side of the network connection, while an external PHY, isolation magnetics, and RJ45 network interface complete the physical layer. Designers should follow the manufacturer reference circuit, preserve continuous ground returns under the 208-pin TQFP, and validate MII timing with the selected PHY. Its 28 x 28 mm footprint is substantial, so the part is most attractive when maintaining an existing controller platform rather than minimizing board area.

🖨️

Legacy Fast Ethernet Printer Interface

The LAN91C100FDTQFP can provide a dedicated 10/100 Mb/s Ethernet connection in a printer or multifunction peripheral built around the LAN91C100FD family. A host processor communicates with the controller while the MII connects to an external 10/100 PHY, allowing the network medium and magnetics to be selected independently. The controller's 10 and 100 Mb/s operation covers both Fast Ethernet modes, while full-duplex support avoids requiring a shared legacy Ethernet arrangement. Because this package has 208 terminals, existing board artwork must be checked carefully for pin orientation, bypass placement, and signal routing. Firmware also needs to preserve the expected register map and initialization sequence, making this approach most suitable for sustaining or repairing an established printer platform.

🌐

Industrial Communication Appliance

The LAN91C100FDTQFP suits an established communication appliance in which the Ethernet MAC is separated from the physical layer for design flexibility. Its CMOS implementation, IEEE 802.3 operation, 10/100 Mb/s support, and shutdown mode provide a practical foundation for equipment that periodically communicates over Fast Ethernet. An external MII-compatible PHY handles line signaling, while network magnetics and connectors provide isolation and physical access. Engineering work should concentrate on controlled-impedance MII routing, uninterrupted ground planes, clock cleanliness, and power sequencing around the many digital signals. Because the device is a legacy platform component, long-term availability and board temperature requirements should be confirmed before new field installations are planned.

📺

Set-Top and Network Access Equipment

The LAN91C100FDTQFP is relevant to set-top boxes and network-access equipment designed around a discrete Ethernet MAC architecture. It supports 10 Mb/s and 100 Mb/s operation, giving the host processor access to Fast Ethernet through the MII while an external PHY performs electrical conversion to the network medium. Full-duplex capability supports contemporary switched-network behavior even though the controller belongs to the first generation of Fast Ethernet products. The implementation must treat MII timing, clock and reset distribution, and bypass placement as layout-critical. Its large 208-pin TQFP package and legacy software interface make it appropriate for sustaining an established design, while a smaller integrated MAC-and-PHY device is generally easier to miniaturize in a new enclosure.

📟

Embedded Measurement and Control System

The LAN91C100FDTQFP can support an embedded measurement or control system that requires a dedicated Fast Ethernet MAC and already accommodates a 208-pin controller footprint. Its 10/100 Mb/s capability is sufficient for supervisory traffic, configuration access, and equipment telemetry, while the MII allows the physical-layer design to be matched to the system's isolation and connector requirements. Commercial-grade operation makes the device suitable for controlled indoor equipment, but the complete system temperature envelope must be checked. Layout should minimize MII skew, maintain continuous references beneath the controller, and isolate Ethernet magnetics from sensitive analog sections. This device is most practical for an existing platform; newly designed measurement systems may favor an integrated transceiver unless software compatibility or established board reuse makes the discrete MAC preferable.

🔧

Legacy Network Adapter Expansion

The LAN91C100FDTQFP can be retained in a legacy network adapter expansion where the original system expects the LAN91C100FD host interface and register behavior. It provides a dedicated 10/100 Mb/s Ethernet MAC with an MII connection to an external PHY, allowing the adapter to support both 10 and 100 Mb/s network modes. The commercial-temperature 208-pin TQFP is consistent with equipment originally designed around a large parallel-interface controller. For repair and continuation projects, preserve the exact footprint, clock topology, configuration straps, and firmware initialization sequence. If replacing the design for a new product, verify controller lifecycle constraints and compare the PCB burden with an integrated MAC-and-PHY option. A functional Ethernet substitute is not automatically a drop-in replacement.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

What is the LAN91C100FDTQFP?
The LAN91C100FDTQFP is a non-PCI 10/100 Ethernet Media Access Controller with a Media Independent Interface and full-duplex capability. According to the Microchip product page, it was designed for first-generation Fast Ethernet adapters and connectivity products using a CMOS digital implementation. The exact MPN identifies the commercial-temperature device in a 208-pin TQFP package measuring 28 x 28 mm.
What Ethernet speeds does LAN91C100FDTQFP support?
The LAN91C100FDTQFP supports both 10 Mb/s and 100 Mb/s Ethernet operation under IEEE 802.3. According to the manufacturer product description, it is a single-chip Fast Ethernet MAC with full-duplex capability. The controller requires an external 10/100 Ethernet PHY because the MII is a digital interface rather than a complete physical-layer transceiver.
Does LAN91C100FDTQFP include an Ethernet PHY?
No. The LAN91C100FDTQFP provides the Ethernet MAC functions but connects to an external physical-layer device through its MII. The manufacturer product page identifies the part as a 10/100 Ethernet MAC with an integrated Media Independent Interface. This arrangement allows designers to select the PHY independently, but it also requires additional magnetics, isolation, and network-interface circuitry.
Where can I download the LAN91C100FDTQFP datasheet?
The official LAN91C100FDTQFP documentation is accessible from the Microchip product page for the LAN91C100FD family. The manufacturer datasheet contains the authoritative pin descriptions, electrical characteristics, timing information, interface requirements, and reference application circuits. Use that document when assigning all 208 package terminals and when validating the external PHY and magnetic-component interface.
Where is the LAN91C100FDTQFP pinout?
The LAN91C100FDTQFP pinout is documented in the pin-description table of the manufacturer datasheet. This device uses a 208-pin TQFP package, and every terminal must be assigned according to that table, including power, ground, host-interface, MII, control, and configuration functions. Use the package drawing and terminal numbering together with the electrical requirements before laying out the PCB.
What is the difference between the MII and an integrated Ethernet PHY?
An MII is a standardized digital interface between an Ethernet MAC and an external PHY, whereas an integrated Ethernet device includes both functions in one package. The LAN91C100FDTQFP uses the MII approach and supports 10/100 Mb/s IEEE 802.3 operation. This architecture offers PHY flexibility but requires more board area and external network-interface components than an integrated MAC-and-PHY solution.
Is LAN91C100FDTQFP suitable for an industrial controller?
The LAN91C100FDTQFP can fit legacy industrial controller designs that require a dedicated 10/100 Ethernet MAC and use an external MII-compatible PHY. Its commercial temperature grade, full-duplex operation, and shutdown function support these use cases. For new safety-critical or extended-temperature systems, verify the complete temperature range, isolation requirements, and lifecycle plan before committing the design.
LAN91C100FDTQFP vs LAN91C110: which is more suitable for a legacy Fast Ethernet design?
The LAN91C100FDTQFP is specifically identified as a 10/100 Ethernet MAC with MII connectivity in a 208-pin TQFP package. A direct replacement decision against LAN91C110 requires comparison of the host interface, MII implementation, pinout, voltage requirements, software registers, and package dimensions. The available cross-reference information does not establish pin-to-pin equivalence, so LAN91C110 should not be treated as a drop-in replacement without that engineering review.
When should I choose LAN91C100FDTQFP over an integrated Ethernet controller?
Choose the LAN91C100FDTQFP when a legacy board already uses its host signals and MII, or when a dedicated MAC provides more control over the external PHY implementation. Its 10/100 Mb/s support, full-duplex capability, and shutdown mode suit established Fast Ethernet equipment. For a new compact design, an integrated MAC-and-PHY controller generally reduces component count and simplifies the analog network interface.
What can replace the LAN91C100FDTQFP?
A valid replacement must match the 208-pin footprint, host interface, MII functions, voltage requirements, timing, and software programming model; a similar Ethernet function alone is insufficient. The available cross-reference results identify related LAN91C100 and LAN91C96-family devices but do not establish five pin-compatible alternatives. Request a quote on this page for the exact LAN91C100FDTQFP, and validate any proposed substitute against the manufacturer datasheet before changing an existing PCB.
What is the best equivalent for LAN91C100FDTQFP?
The best equivalent is the device that preserves the 208-terminal footprint and preserves the LAN91C100FDTQFP host and MII behavior without requiring PCB changes. No cross-brand equivalent in the available references is confirmed as pin-to-pin compatible. Because the controller includes many package terminals and legacy software dependencies, use the manufacturer pin and timing tables to determine whether an alternative is genuinely drop-in or only functionally similar.
How should the LAN91C100FDTQFP be placed on a PCB?
Place the controller over a continuous ground plane and route MII and host signals over controlled-impedance references with short return paths to the ground plane. Follow the manufacturer reference circuit for bypass capacitors, clock, reset, configuration straps, and interface timing. Avoid routing MII signals across split planes or noisy power-converter regions, and use the exact package drawing to confirm orientation and terminal assignments.
Does the LAN91C100FDTQFP support low-power shutdown?
Yes. The manufacturer describes a low-power shutdown mode for the LAN91C100FDTQFP, making it possible to reduce activity when the host does not require network operation. The exact current consumption, wake-up timing, and control-signal requirements are defined in the manufacturer datasheet. Validate the shutdown state against the external PHY behavior so the network interface remains electrically consistent during startup and sleep transitions.
How much power does the LAN91C100FDTQFP consume?
The LAN91C100FDTQFP uses CMOS technology and includes a dedicated low-power shutdown mode, but a defensible operating-power value requires the device's specific supply voltages, clock configuration, interface activity, and thermal conditions. Use the electrical-characteristics table in the manufacturer datasheet for typical and maximum current. Estimate board-level dissipation from the selected operating mode rather than applying a generic value across all traffic conditions.
Where can I get a quote or current lead time for LAN91C100FDTQFP?
Use the Request a Quote form on this page to request current availability, minimum order quantity, lead time, and legacy-part sourcing support for the exact LAN91C100FDTQFP. Because this is a legacy controller, include the PCB revision, required temperature grade, and any date-code or traceability requirements in the request. Confirm the exact package suffix before authorizing a shipment.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা LAN91C100FDTQFP — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the LAN91C100FDTQFP when maintaining a legacy Fast Ethernet platform whose PCB, host bus, firmware, and external MII PHY are already designed around the LAN91C100FD family. Its dedicated 10/100 Mb/s MAC, full-duplex support, commercial temperature grade, and shutdown mode make it useful for sustaining industrial controls, printers, adapters, and communication appliances. Do not select a related LAN91C96 or LAN91C110 device merely because it also supports Ethernet; the package count, host interface, timing, and programming model must be compared before substitution. For a newly designed compact product, an integrated MAC-and-PHY controller normally reduces board area and component count. Use the discrete MAC when PHY selection, isolation, or legacy software compatibility outweighs those integration benefits.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য
Brand Microchip Technology
Package 208-pin TQFP, 28 x 28 mm
Supported Ethernet Speeds 10 Mb/s and 100 Mb/s
Ethernet Standard IEEE 802.3
Controller Function 10/100 Ethernet MAC
Host Interface Non-PCI parallel host interface
Physical-Layer Interface MII
Duplex Capability Full duplex
Technology CMOS
Temperature Grade Commercial
Power Management Low-power shutdown mode
Number of Terminals 208

মূল পার্থক্যসমূহ

  • Dedicated non-PCI 10/100 Ethernet MAC architecture (বনামLAN91C110)
  • Full-duplex Fast Ethernet support (বনামLAN91C96-MS)
  • MII-based physical-layer flexibility (বনামIntegrated MAC-and-PHY controllers)

ডিজাইন নোট

Use the manufacturer's package drawing and pin table to verify all 208 terminal assignments before routing. Keep MII and parallel host signals over a continuous ground plane, avoid plane transitions beneath the device, and match MII trace lengths according to the timing requirements in the manufacturer datasheet. Separate the external Ethernet PHY and magnetics from sensitive analog areas so high-energy network transients do not couple into unrelated signal paths.

Follow the manufacturer reference circuit for bypass capacitance, supply sequencing, clocking, reset, and shutdown control. Place required high-frequency bypass components at their specified power terminals and provide low-impedance paths to the ground plane. The shutdown behavior must be coordinated with the external PHY and host reset strategy so the Ethernet link cannot enter an undefined state during startup, sleep, or firmware recovery.

Do not treat a device described as an Ethernet controller as a guaranteed pin-compatible replacement unless its host interface, MII timing, supply voltages, terminal assignments, and register map match the LAN91C100FDTQFP. The large package also makes orientation errors costly. Compare the exact package suffix, verify pin 1 against the manufacturer drawing, and conduct an electrical and firmware review before substituting or modifying an existing PCB.

Treat MII, clock, and host-interface routing as a synchronous digital interface. Use a stable reference plane, minimize stub lengths, avoid right-angle routing where practical, and control impedance using the actual board stack-up. Validate timing at the external PHY interface because package transitions, connector or magnetics placement, and clock distribution can affect signal integrity even when the nominal source timing is compliant.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The device is a commercial-grade legacy Ethernet controller. No current component-specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was established, so these fields remain unknown. AEC-Q100 is not applicable to this device.

ডেটা যাচাই করা হয়েছে: 2026-11-14 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

LAN91C100FDTQFP datasheet LAN91C100FDTQFP specifications LAN91C100FDTQFP pinout LAN91C100FDTQFP datasheet pdf LAN91C100FDTQFP equivalent LAN91C100FDTQFP replacement LAN91C100FDTQFP cross reference LAN91C100FDTQFP price LAN91C100FDTQFP stock Microchip LAN91C100FDTQFP LAN91C100 208 pin Ethernet controller LAN91C100FDTQFP MII interface LAN91C100FDTQFP TQFP footprint LAN91C100FDTQFP application circuit LAN91C100FDTQFP vs LAN91C110

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Microchip Technology SMSC LAN91C100FDTQFP LAN91C100FD LAN91C96-MS LAN91C110 Ethernet MAC Media Access Controller Media Independent Interface MII IEEE 802.3 Fast Ethernet 10 Mb/s 100 Mb/s full duplex CMOS TQFP-208 28 x 28 mm package surface mount Ethernet PHY network magnetics industrial Ethernet legacy network adapter low-power shutdown
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন