LAN91C100FDTQFP - 10/100 Ethernet MAC Controller | Microchip
部品番号: LAN91C100FDTQFP ✗ 生産終了LAN91C100FDTQFP 概要
An Ethernet MAC controller is an interface IC that manages frame transmission, reception, address filtering, and access to the physical network medium. In the product hierarchy, the LAN91C100FDTQFP belongs to Ethernet controllers, within interface ICs and semiconductors. Its MII provides a standardized digital connection to an external Ethernet PHY, allowing system designers to separate network-medium conversion from MAC processing while retaining flexibility in magnetics and transceiver selection.
Key characteristics include support for 10 Mb/s and 100 Mb/s Ethernet, IEEE 802.3 operation, full-duplex capability, commercial-temperature construction, and low-power shutdown. The MII interface makes the device suitable for embedded systems, industrial controllers, print servers, set-top equipment, and other legacy Fast Ethernet products that were designed around a dedicated MAC rather than an integrated Ethernet transceiver. Because the MAC does not include the physical-layer circuitry, the board still requires a compatible 10/100 Ethernet PHY and the associated magnetics and network interface components.
The LAN91C100FDTQFP was developed for first-generation Fast Ethernet adapter designs, where implementation flexibility and external PHY selection were priorities. Its 208-pin package provides a broad set of parallel host and MII signals, while the large lead count makes careful high-speed trace routing, plane use, and ground-return design important. The controller operates from a digital CMOS environment, and its shutdown capability can reduce power consumption when the attached system does not require continuous network connectivity.
Typical deployments include embedded industrial Ethernet equipment, legacy network adapters, printers, multifunction peripherals, embedded control systems, and purpose-built communication appliances. The controller is most appropriate when the host processor requires a dedicated Ethernet MAC but the product specification allows use of an external PHY. It is less attractive for new compact designs where an integrated MAC-and-PHY device would reduce board area, component count, and design effort.
For implementation, follow the pin-description and reference-circuit tables in the manufacturer datasheet when assigning every ball or lead and selecting bypass capacitance. Preserve continuous ground-plane returns beneath the high-speed MII and host interface paths, terminate unused inputs according to the device requirements, and validate signal integrity with the selected PHY and board stack-up. This product page combines device identification, interface guidance, comparison considerations, and sourcing support to support legacy Fast Ethernet design work.
ドロップイン代替品: LAN91C100FDTQFP — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストLAN91C100FDTQFP 仕様
| Ethernet Standard | IEEE 802.3 |
| Supported Data Rates | 10 Mb/s and 100 Mb/s |
| Controller Type | Non-PCI 10/100 Ethernet MAC |
| Host Interface | MII |
| Duplex Support | Full duplex |
| Process Technology | CMOS |
| パッケージ | 208-pin TQFP, 28 x 28 mm |
| 実装タイプ | Surface mount |
| Temperature Grade | Commercial |
| Power Management | Low-power shutdown mode |
| Number of Terminals | 208 |
LAN91C100FDTQFP 208-pin tqfp, 28 x 28 mm ピン配置ガイド
LAN91C100FDTQFP (208-pin tqfp, 28 x 28 mm パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: LAN91C100FDTQFP.
詳細は データシート をご参照ください。
主な用途
LAN91C100FDTQFP の用途: 6 件s: Embedded Industrial Ethernet Controller, Legacy Fast Ethernet Printer Interface, Industrial Communication Appliance, Set-Top and Network Access Equipment, Embedded Measurement and Control System, Legacy Network Adapter Expansion.
Embedded Industrial Ethernet Controller
The LAN91C100FDTQFP is appropriate for a legacy industrial controller that needs a dedicated 10/100 Mb/s Ethernet MAC while retaining freedom to select an external MII-compatible PHY. Its IEEE 802.3 support, full-duplex capability, and commercial temperature grade fit established control equipment operating from the specified commercial range. The controller handles the digital MAC side of the network connection, while an external PHY, isolation magnetics, and RJ45 network interface complete the physical layer. Designers should follow the manufacturer reference circuit, preserve continuous ground returns under the 208-pin TQFP, and validate MII timing with the selected PHY. Its 28 x 28 mm footprint is substantial, so the part is most attractive when maintaining an existing controller platform rather than minimizing board area.
おすすめ
Legacy Fast Ethernet Printer Interface
The LAN91C100FDTQFP can provide a dedicated 10/100 Mb/s Ethernet connection in a printer or multifunction peripheral built around the LAN91C100FD family. A host processor communicates with the controller while the MII connects to an external 10/100 PHY, allowing the network medium and magnetics to be selected independently. The controller's 10 and 100 Mb/s operation covers both Fast Ethernet modes, while full-duplex support avoids requiring a shared legacy Ethernet arrangement. Because this package has 208 terminals, existing board artwork must be checked carefully for pin orientation, bypass placement, and signal routing. Firmware also needs to preserve the expected register map and initialization sequence, making this approach most suitable for sustaining or repairing an established printer platform.
おすすめ
Industrial Communication Appliance
The LAN91C100FDTQFP suits an established communication appliance in which the Ethernet MAC is separated from the physical layer for design flexibility. Its CMOS implementation, IEEE 802.3 operation, 10/100 Mb/s support, and shutdown mode provide a practical foundation for equipment that periodically communicates over Fast Ethernet. An external MII-compatible PHY handles line signaling, while network magnetics and connectors provide isolation and physical access. Engineering work should concentrate on controlled-impedance MII routing, uninterrupted ground planes, clock cleanliness, and power sequencing around the many digital signals. Because the device is a legacy platform component, long-term availability and board temperature requirements should be confirmed before new field installations are planned.
おすすめ
Set-Top and Network Access Equipment
The LAN91C100FDTQFP is relevant to set-top boxes and network-access equipment designed around a discrete Ethernet MAC architecture. It supports 10 Mb/s and 100 Mb/s operation, giving the host processor access to Fast Ethernet through the MII while an external PHY performs electrical conversion to the network medium. Full-duplex capability supports contemporary switched-network behavior even though the controller belongs to the first generation of Fast Ethernet products. The implementation must treat MII timing, clock and reset distribution, and bypass placement as layout-critical. Its large 208-pin TQFP package and legacy software interface make it appropriate for sustaining an established design, while a smaller integrated MAC-and-PHY device is generally easier to miniaturize in a new enclosure.
おすすめ
Embedded Measurement and Control System
The LAN91C100FDTQFP can support an embedded measurement or control system that requires a dedicated Fast Ethernet MAC and already accommodates a 208-pin controller footprint. Its 10/100 Mb/s capability is sufficient for supervisory traffic, configuration access, and equipment telemetry, while the MII allows the physical-layer design to be matched to the system's isolation and connector requirements. Commercial-grade operation makes the device suitable for controlled indoor equipment, but the complete system temperature envelope must be checked. Layout should minimize MII skew, maintain continuous references beneath the controller, and isolate Ethernet magnetics from sensitive analog sections. This device is most practical for an existing platform; newly designed measurement systems may favor an integrated transceiver unless software compatibility or established board reuse makes the discrete MAC preferable.
おすすめ
Legacy Network Adapter Expansion
The LAN91C100FDTQFP can be retained in a legacy network adapter expansion where the original system expects the LAN91C100FD host interface and register behavior. It provides a dedicated 10/100 Mb/s Ethernet MAC with an MII connection to an external PHY, allowing the adapter to support both 10 and 100 Mb/s network modes. The commercial-temperature 208-pin TQFP is consistent with equipment originally designed around a large parallel-interface controller. For repair and continuation projects, preserve the exact footprint, clock topology, configuration straps, and firmware initialization sequence. If replacing the design for a new product, verify controller lifecycle constraints and compare the PCB burden with an integrated MAC-and-PHY option. A functional Ethernet substitute is not automatically a drop-in replacement.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: LAN91C100FDTQFP — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Brand | Microchip Technology |
| Package | 208-pin TQFP, 28 x 28 mm |
| Supported Ethernet Speeds | 10 Mb/s and 100 Mb/s |
| Ethernet Standard | IEEE 802.3 |
| Controller Function | 10/100 Ethernet MAC |
| Host Interface | Non-PCI parallel host interface |
| Physical-Layer Interface | MII |
| Duplex Capability | Full duplex |
| Technology | CMOS |
| Temperature Grade | Commercial |
| Power Management | Low-power shutdown mode |
| Number of Terminals | 208 |
主な差別化要因
- Dedicated non-PCI 10/100 Ethernet MAC architecture (vs LAN91C110)
- Full-duplex Fast Ethernet support (vs LAN91C96-MS)
- MII-based physical-layer flexibility (vs Integrated MAC-and-PHY controllers)
設計ノート
Use the manufacturer's package drawing and pin table to verify all 208 terminal assignments before routing. Keep MII and parallel host signals over a continuous ground plane, avoid plane transitions beneath the device, and match MII trace lengths according to the timing requirements in the manufacturer datasheet. Separate the external Ethernet PHY and magnetics from sensitive analog areas so high-energy network transients do not couple into unrelated signal paths.
Follow the manufacturer reference circuit for bypass capacitance, supply sequencing, clocking, reset, and shutdown control. Place required high-frequency bypass components at their specified power terminals and provide low-impedance paths to the ground plane. The shutdown behavior must be coordinated with the external PHY and host reset strategy so the Ethernet link cannot enter an undefined state during startup, sleep, or firmware recovery.
Do not treat a device described as an Ethernet controller as a guaranteed pin-compatible replacement unless its host interface, MII timing, supply voltages, terminal assignments, and register map match the LAN91C100FDTQFP. The large package also makes orientation errors costly. Compare the exact package suffix, verify pin 1 against the manufacturer drawing, and conduct an electrical and firmware review before substituting or modifying an existing PCB.
Treat MII, clock, and host-interface routing as a synchronous digital interface. Use a stable reference plane, minimize stub lengths, avoid right-angle routing where practical, and control impedance using the actual board stack-up. Validate timing at the external PHY interface because package transitions, connector or magnetics placement, and clock distribution can affect signal integrity even when the nominal source timing is compliant.
コンプライアンス情報
The device is a commercial-grade legacy Ethernet controller. No current component-specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was established, so these fields remain unknown. AEC-Q100 is not applicable to this device.