LC4064C-5T100I - 64-Macrocell 1.8V CPLD | Lattice Semiconductor
MPN: LC4064C-5T100I ✗ জীবনকালের সমাপ্তিLC4064C-5T100I সারাংশ
A complex programmable logic device, or CPLD, is a programmable logic semiconductor that combines multiple programmable logic blocks with a defined interconnect architecture. In the hierarchy of digital semiconductors, a CPLD belongs to programmable logic devices alongside FPGAs and PAL/GAL devices. The LC4064C provides deterministic timing, persistent configuration storage, and relatively simple design tools for glue logic, control logic, interface adaptation, and system-support functions.
The device provides 64 macrocells and operates from a 1.65 V to 1.95 V internal core supply. Its 5 ns typical propagation delay supports operation up to 227 MHz, making it useful where conventional PAL and GAL logic is too slow. The ispMACH 4000 family supports in-system programming, allowing a board to be configured or updated without removing the device. The 100-pin TQFP package also provides ample external I/O for control, status, and data-path interfaces.
The LC4064C family combines programmable logic blocks, programmable interconnect, configuration memories, and input/output structures in a single package. Because the configuration is nonvolatile, the implemented circuit remains present after power is removed and restored. This is valuable in industrial controllers, embedded equipment, communications interfaces, and legacy control systems that require deterministic behavior without continuous FPGA configuration overhead.
Typical uses include industrial control and automation, communications-interface conditioning, test and measurement equipment, embedded peripheral control, and legacy system integration. In each case, the 64-macrocell capacity can consolidate multiple PAL-style functions into one device while preserving predictable propagation delays and a stable, reprogrammable design flow.
PCB design must follow the manufacturer's pin-assignment and power-decoupling guidance, especially for the 1.8 V core rail, programming interface, clock inputs, and I/O reference requirements. Confirm the industrial-temperature operating limits and signal standards of the exact board before migration. Because this orderable has been discontinued, obsolete-board repair and design-for-migration programs should verify stock, traceability, and the availability of an active successor before committing a production release.
This page combines the documented device characteristics, lifecycle status, same-package replacement context, and practical implementation guidance needed to assess the LC4064C-5T100I during legacy CPLD repair, redesign planning, and drop-in compatibility assessment.
এর জন্য ড্রপ-ইন বিকল্প LC4064C-5T100I — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible LC4064C-5T100I (একই form factor এবং footprint) — পার্থক্য রয়েছে Device Type, Temperature Grade, Product Family, Supported Supply Voltages.
LC4064C-5TN100C
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
LC4064C-5T100C
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়মূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →LC4064B-5T100I
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়মূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →LC4064V-5T100I
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়মূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →LC4064Z-5T100I
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
LC4064C-5T100I সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Device Type | ispMACH 4000C CPLD |
| Macrocell Count | 64 macrocells |
| Maximum Frequency | 227 MHz |
| Typical Propagation Delay | 5 ns |
| Core Supply Voltage | 1.8 V |
| Internal Supply Range | 1.65 V to 1.95 V |
| প্যাকেজ | 100-pin TQFP |
| মাউন্টিং টাইপ | Surface mount |
| Temperature Grade | Industrial |
| Programmable Architecture | SuperFAST high-density PLD |
| Configuration Method | In-system programmable |
| Configuration Memory | Nonvolatile |
| User I/O Count | 64 I/O pins |
| Logic Element Count | 4 logic elements |
| Packaging Format | Tray |
| লাইফসাইকেল স্ট্যাটাস | Discontinued |
LC4064C-5T100I 100-pin tqfp পিন কনফিগারেশন গাইড
LC4064C-5T100I (100-pin tqfp প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি LC4064C-5T100I.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
LC4064C-5T100I এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Control and Automation, Communications Interface Conditioning, Test and Measurement Equipment, Embedded Peripheral Control, Legacy System Repair, Data Acquisition and Signal Conditioning.
Industrial Control and Automation
The LC4064C-5T100I fits industrial control boards that combine machine sequencing, interlocks, alarm logic, and peripheral decoding in one programmable device. Its 64 macrocells provide substantial logic density, while the 5 ns typical propagation delay supports deterministic control paths operating up to 227 MHz. The 100-pin TQFP exposes 64 user I/O pins for sensors, actuators, interlocks, status indicators, and field-bus interfaces. In-system programming also allows production fixtures or maintenance personnel to update logic without removing the package. Because the orderable is discontinued, an industrial redesign should treat it primarily as a legacy repair component and verify temperature qualification, I/O voltage, and supply sequencing against the current machine specification.
সুপারিশকৃত
Communications Interface Conditioning
The LC4064C-5T100I can implement protocol framing, command decoding, FIFO control, bus arbitration, and data-format conversion in communications equipment. Its 64 macrocells allow several interface functions to be consolidated, while the 227 MHz operating class and 5 ns typical propagation delay accommodate synchronous control logic around slower external interfaces. The 64 user I/O pins are useful for parallel data, chip-select, read/write, interrupt, and clock signals. Designers should use the family timing diagrams to establish setup and hold margins, and should check the supported I/O standards before connecting to modern low-voltage serializers. In-system programming makes it practical to maintain interface revisions in deployed networking or test equipment without board-level rework.
সুপারিশকৃত
Test and Measurement Equipment
The LC4064C-5T100I is suitable for sequencing and status logic inside test, measurement, and automated inspection equipment. Its 64 macrocells can combine pattern generation, instrument control, timing-state machines, and front-panel decoding, while the 5 ns typical delay supports clocked control logic up to 227 MHz. The 100-pin TQFP provides 64 user I/O pins for instrument enables, trigger paths, range selects, and result signals. A practical implementation can use programmable glue logic to normalize commands from an embedded controller and dispatch them to multiple measurement channels. Timing-sensitive acquisition paths should remain separate from slower legacy control signals, and the complete schematic should verify the supported I/O standards and acquisition-signal bandwidth before relying on the CPLD for waveform-critical functions.
সুপারিশকৃত
Embedded Peripheral Control
The LC4064C-5T100I can act as a dedicated peripheral controller between an embedded processor and older discrete logic. Its 64 macrocells are useful for address decoding, interrupt control, watchdog supervision, bus-width conversion, and peripheral chip-select generation, while the 100-pin package exposes ample signals for data and control buses. The 227 MHz class provides margin for synchronous interface logic even though typical designs operate more slowly. In-system programming supports a controlled production flow and allows field updates after functional validation. Engineers should keep high-speed processor interfaces short, use the recommended clock topology, and validate every legacy signal against the exact 4000C pin and timing tables because replacing a discrete PAL network with the CPLD may otherwise introduce setup, hold, or I/O-standard mismatches.
সুপারিশকৃত
Legacy System Repair
The LC4064C-5T100I is primarily relevant to maintenance and obsolescence programs for equipment built around the Lattice ispMACH 4000C family. Its exact 64-macrocell density, 5 ns speed designation, industrial-temperature suffix, and 100-pin TQFP package are important identifiers when matching a failed or unavailable board component. A repair design should compare the original schematic, package drawing, programming file, and board revision before installation. Because the device is discontinued, procurement should include lot traceability and inspection, while firmware or logic-file compatibility should be verified to prevent configuration and timing mismatches. Long-term repair plans should also identify a migration path because inventory availability can decline even when immediate parts remain available.
সুপারিশকৃত
Data Acquisition and Signal Conditioning
The LC4064C-5T100I can implement digital conditioning around slower sensors, converters, and legacy data-acquisition modules. The 64 macrocells are sufficient for channel selection, calibration tables, status flags, trigger routing, and data-format alignment, while the 100-pin TQFP provides 64 user I/O pins for parallel buses and control signals. Its 227 MHz maximum frequency makes the device useful for synchronous control, although analog signal integrity remains outside the CPLD’s role. A sound implementation separates high-frequency acquisition paths from the programmable conditioning layer and follows the manufacturer’s clock and decoupling recommendations. Engineers should verify the I/O voltage thresholds, supported standards, and external clock-jitter requirements against the target data rate before treating the device as a direct acquisition-path solution.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা LC4064C-5T100I — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | LC4064C-5TN100C | LC4064C-5T100C | LC4064B-5T100I | LC4064V-5T100I | LC4064Z-5T100I |
|---|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | TQFP-100 | TQFP-100 | TQFP-100 | TQFP-100 | TQFP-100 | TQFP-100 |
| Device Family | ispMACH 4000C | ispMACH 4000C | ispMACH 4000C | ispMACH 4000B | ispMACH 4000V | ispMACH 4000Z |
| Typical Propagation Delay | 5 ns | 5 ns class | 5 ns class | 5 ns speed grade | 5 ns speed grade | 5 ns speed grade |
| Temperature Grade | Industrial | Commercial | Commercial | Industrial | Industrial | Industrial |
| Programming Support | In-system programmable | In-system programmable | In-system programmable | In-system programmable | In-system programmable | In-system programmable |
মূল পার্থক্যসমূহ
- Maintains the industrial-temperature designation (বনামLC4064C-5TN100C)
- Uses the specified 4000C device generation (বনামLC4064B-5T100I)
- Provides a direct 5 ns timing-class option in the same footprint (বনামLC4064V-75TN100C)
- Combines 64 macrocells with 227 MHz operation (বনামATF16LV8C-10JU)
ডিজাইন নোট
Design the power network around the documented 1.65 V to 1.95 V core-supply range and confirm the I/O supply arrangement for every bank. Place the required bulk and high-frequency decoupling capacitors close to their associated supply and ground pins, with a low-impedance return path to the device. Because this is a 1.8 V legacy CPLD, verify the regulator’s startup behavior, tolerance, ripple, and sequencing against the family power instructions before connecting external I/O that may remain active during configuration.
Use the official 100-pin TQFP land pattern and pin numbering for the PCB footprint rather than inferring orientation from a generic drawing. Keep programming signals, configuration control pins, clock inputs, and decoupling paths short, and route sensitive timing inputs away from switching nodes. Provide unobstructed access to the programming interface for production fixtures and field updates. After artwork release, compare every ball or pad assignment against the manufacturer pin table for the exact LC4064C density and speed grade.
The 5 ns typical propagation delay does not remove the need for board-level timing analysis. Calculate setup and hold margins for the actual external clock, output loading, I/O standard, and board skew, especially when the CPLD interfaces to a processor or memory device. Use the family timing library for the selected speed grade, constrain external clock paths, and avoid relying on the 227 MHz headline figure unless the power, I/O, and clock assumptions satisfy the corresponding operating conditions.
Do not treat a same-package 4000-family device as an automatic substitute. The LC4064B, LC4064V, and LC4064Z alternatives retain the TQFP-100 footprint, but device generation, macrocell utilization, I/O behavior, timing, and temperature requirements must be checked against the original design. Commercial-grade replacements are unsuitable when the equipment must satisfy an industrial temperature range. Validate the programmed bitstream, power-up behavior, and board-level interfaces before releasing any alternate component into production.
কমপ্লায়েন্স তথ্য
The component is an industrial CPLD rather than an automotive-qualified device. Exact RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established for this orderable.