LC4128B-5T100C - 128-Macrocell 5 ns ISP CPLD | Lattice
MPN: LC4128B-5T100C ✗ জীবনকালের সমাপ্তিLC4128B-5T100C সারাংশ
A CPLD is a programmable logic device that combines user-programmable logic, nonvolatile configuration storage, and a defined pin interface in one integrated circuit. The ispMACH 4000 family belongs to the broader complex-programmable-logic hierarchy, where each macrocell can implement combinatorial or registered Boolean functions. This makes the LC4128B suitable for glue logic, control sequencing, interface adaptation, and other fixed-logic functions that benefit from field programmability.
The device provides up to 380 MHz maximum operating frequency, 2.5 ns propagation delay, and up to four global clock pins with programmable clock-polarity control. Its 128 macrocells and 64 user I/Os provide substantial logic density for a compact 100-pin package. A reported internal frequency of 200 MHz and 4 ns propagation delay reflect device-specific characterization, while the family-level maximum-frequency and minimum-delay figures describe the performance envelope of the ispMACH 4000 architecture.
In-system programmability allows the configuration to be updated through the device programming interface without removing the component from its circuit. This characteristic is useful during prototype bring-up, production configuration, or field maintenance where control logic may need revision. The configurable architecture and global clock distribution also reduce the need for separate discrete logic when functions can be consolidated into one CPLD.
Typical uses include industrial control and timing logic, bus-interface decoding, state-machine implementation, peripheral signal conditioning, embedded system boot coordination, and compact communications-control logic. The 64 available user I/Os are useful when a design must connect several external buses, status signals, or actuator outputs while retaining internal programmable logic.
For new layouts, verify every power pin, programming signal, clock input, ground connection, and I/O assignment against the manufacturer pin-description table. Because the device is no longer active, designers should also confirm configuration-file compatibility, programming-tool support, and supply availability before committing a new production design.
This page combines the device's speed, macrocell, I/O, voltage, and package characteristics with practical programming and design guidance. It also distinguishes verified technical attributes from replacement data, helping engineers evaluate legacy CPLD requirements before changing an existing PCB.
এর জন্য ড্রপ-ইন বিকল্প LC4128B-5T100C — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই পণ্যের জন্য কোনো ড্রপ-ইন বিকল্প পাওয়া যায়নি।
বিকল্প অনুরোধ করুনLC4128B-5T100C সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Device Type | Complex Programmable Logic Device |
| Macrocell Count | 128 macrocells |
| User I/O Count | 64 pins |
| Programming Type | In-System Programmable |
| Logic Family | CMOS |
| Supply Voltage Options | 3.3 V, 2.5 V, or 1.8 V |
| Speed Grade | 5 ns |
| Maximum Operating Frequency | 380 MHz |
| Minimum Propagation Delay | 2.5 ns |
| Reported Internal Frequency | 200 MHz |
| Reported Propagation Delay | 4 ns |
| Global Clock Pins | Up to 4 pins |
| Package Type | 100-pin TQFP (14 x 14 mm) |
| মাউন্টিং টাইপ | Surface Mount |
| Package Code | LFQFP |
LC4128B-5T100C lfqfp পিন কনফিগারেশন গাইড
LC4128B-5T100C (lfqfp প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি LC4128B-5T100C.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
LC4128B-5T100C এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Control and Timing Logic, Bus Interface Decoding, Embedded Boot Sequencing, Peripheral Signal Conditioning, Communications Control Logic, Test and Measurement Control.
Industrial Control and Timing Logic
The LC4128B-5T100C fits centralized machine-control logic because its 128 macrocells can implement state machines, interlocks, timing sequences, and discrete decision logic while 64 user I/Os connect sensors, actuators, and status indicators. The manufacturer datasheet lists up to four global clock inputs with programmable polarity, allowing related timing domains to be consolidated. In-system programming also supports controlled logic revisions during commissioning. Because this is a legacy device, confirm its temperature grade and supply status, then validate every clock-domain crossing and I/O timing path against the manufacturer timing model.
সুপারিশকৃত
Bus Interface Decoding
The LC4128B-5T100C can decode address, command, and status signals into internal enables and control outputs. Its 64 user I/Os provide sufficient external connectivity for parallel buses and peripheral-select logic, while the 128 macrocells support registered decoding, debounce, arbitration, and state tracking. The 5 ns grade and family timing envelope support compact interface functions that must operate close to surrounding digital circuitry. Engineers should establish setup and hold requirements from the manufacturer datasheet, use registered outputs where appropriate, and verify that the programmed pin assignments match the board-level bus connector and voltage levels.
সুপারিশকৃত
Embedded Boot Sequencing
The LC4128B-5T100C is appropriate for coordinating power-up events, reset sequencing, peripheral enables, and fault latches in an embedded control system. Its in-system programming characteristic permits the configuration to be revised during board bring-up, while programmable global clocks help organize state transitions across several control domains. With 128 macrocells and 64 user I/Os, sequencing functions can be consolidated without a large FPGA. In a new design, verify configuration access requirements and startup timing carefully; in a legacy repair, preserve the original programming file and pin assignment because a functionally similar CPLD may require a new board and configuration flow.
সুপারিশকৃত
Peripheral Signal Conditioning
The LC4128B-5T100C can place programmable adaptation logic between a host processor and external peripherals. Typical functions include signal polarity conversion, latch-and-hold behavior, pulse qualification, status aggregation, and command decoding. The 64 user I/Os make it practical to connect several peripheral signals without relying on a large programmable-logic array. The manufacturer describes support for 3.3 V, 2.5 V, and 1.8 V configurations, which should be matched to the board's interface requirements. Confirm each signal's standard, direction, timing, and I/O-mode capability in the pin-description table before assigning the device.
সুপারিশকৃত
Communications Control Logic
The LC4128B-5T100C can implement protocol state machines, frame-control flags, counters, and command routing around a communications controller. Its 128 macrocells provide enough logic for multiple related functions, while programmable clock polarity supports coordination among external and internally registered signals. For equipment requiring deterministic behavior, use the manufacturer's timing reports rather than headline frequency values and include synchronization or isolation where a signal crosses between unrelated clock domains. The LC4128B family is obsolete, so a current-source program should confirm remaining inventory, programming-tool availability, and the exact configuration file before the part is committed to production.
সুপারিশকৃত
Test and Measurement Control
The LC4128B-5T100C can consolidate trigger sequencing, mode control, status multiplexing, and front-panel logic around a test or measurement instrument. The 64 user I/Os support multiple control paths, and the device's programmable architecture makes it useful when the same hardware must support several instrument modes. Logic functions requiring accurate timing should use the speed-grade timing model and registered outputs. For new instruments, evaluate a currently supported programmable-logic device because toolchain, configuration-file, and lifecycle management are critical for production testing. For an existing instrument, confirm the original pinout, termination settings, and power rails before replacing the device.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা LC4128B-5T100C — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য |
|---|---|
| Brand | Lattice Semiconductor |
| Package | 100-pin TQFP (14 x 14 mm) |
| Device Type | Complex Programmable Logic Device |
| Programming Type | In-System Programmable |
| Macrocell Count | 128 macrocells |
| User I/O Count | 64 pins |
| Supply Voltage Options | 3.3 V, 2.5 V, or 1.8 V |
| Maximum Operating Frequency | 380 MHz |
| Minimum Propagation Delay | 2.5 ns |
| Speed Grade | 5 ns |
| Global Clock Pins | Up to 4 pins |
| Lifecycle Status | Obsolete |
মূল পার্থক্যসমূহ
- Provides a consolidated legacy CPLD implementation in one package (বনামDiscrete logic implementation)
- Supports in-system reconfiguration (বনামMask-programmed or non-reconfigurable PLD)
- Combines high logic density with legacy footprint continuity (বনামNew 100-pin programmable-logic redesign)
ডিজাইন নোট
Do not treat a similar 100-pin TQFP CPLD as a drop-in replacement without confirming the complete pin list, power rails, configuration interface, I/O standards, and programmable architecture. The LC4128B-5T100C uses an ispMACH 4000 configuration flow, and the available replacement search identifies no current Lattice device with matching capacity. Preserve the original JEDEC file and verify it with the intended programming tool before committing an order.
Follow the manufacturer board-layout and decoupling instructions rather than relying on a generic TQFP footprint. Place programming-interface access, clock inputs, and sensitive I/O paths with short, controlled traces; keep the power and ground distribution continuous across all package pins. Confirm the exposed pad or thermal arrangement only if the selected package drawing specifies one, and compare the land pattern directly against the 100-pin LFQFP/TQFP drawing before fabrication.
Create each interface timing constraint from the -5 speed-grade data, including clock skew, setup, hold, and output-delay values for the exact pin configuration. The family can reach 380 MHz maximum operating frequency, but that figure does not guarantee equal margins for every I/O path. Use registered logic for critical stages, constrain slow or externally generated clocks, and run post-route timing simulation against the actual board topology before release.
Select one of the documented 3.3 V, 2.5 V, or 1.8 V operating configurations and wire every power pin according to the manufacturer pin-description table. Apply the datasheet's recommended input and output decoupling values, with short ground returns and distributed supply capacitance. In a mixed-voltage system, verify that every connected I/O remains within its specified input and output limits; the core supply label alone does not make all pins voltage-tolerant.
কমপ্লায়েন্স তথ্য
The catalog records do not provide a verified compliance declaration. Obtain the applicable manufacturer or supplier documentation before releasing the legacy device into RoHS-, REACH-, or automotive-controlled production.