Lattice Semiconductor

LC4128B-5T100C - 128-Macrocell 5 ns ISP CPLD | Lattice

N.º de pieza: LC4128B-5T100C ✗ Fin de vida
3.3 V, 2.5 V, or 1.8 V Vdss 100-pin TQFP (14 x 14 mm) Package 5 ns Speed
MOQ: 1 |

LC4128B-5T100C Descripción general

The Lattice Semiconductor LC4128B-5T100C is a 128-macrocell in-system programmable complex programmable logic device with 64 user I/O pins, a 5 ns speed grade, and a 100-pin TQFP package. It operates from 3.3 V, 2.5 V, or 1.8 V and supports in-system reconfiguration through its programming architecture.

A CPLD is a programmable logic device that combines user-programmable logic, nonvolatile configuration storage, and a defined pin interface in one integrated circuit. The ispMACH 4000 family belongs to the broader complex-programmable-logic hierarchy, where each macrocell can implement combinatorial or registered Boolean functions. This makes the LC4128B suitable for glue logic, control sequencing, interface adaptation, and other fixed-logic functions that benefit from field programmability.

The device provides up to 380 MHz maximum operating frequency, 2.5 ns propagation delay, and up to four global clock pins with programmable clock-polarity control. Its 128 macrocells and 64 user I/Os provide substantial logic density for a compact 100-pin package. A reported internal frequency of 200 MHz and 4 ns propagation delay reflect device-specific characterization, while the family-level maximum-frequency and minimum-delay figures describe the performance envelope of the ispMACH 4000 architecture.

In-system programmability allows the configuration to be updated through the device programming interface without removing the component from its circuit. This characteristic is useful during prototype bring-up, production configuration, or field maintenance where control logic may need revision. The configurable architecture and global clock distribution also reduce the need for separate discrete logic when functions can be consolidated into one CPLD.

Typical uses include industrial control and timing logic, bus-interface decoding, state-machine implementation, peripheral signal conditioning, embedded system boot coordination, and compact communications-control logic. The 64 available user I/Os are useful when a design must connect several external buses, status signals, or actuator outputs while retaining internal programmable logic.

For new layouts, verify every power pin, programming signal, clock input, ground connection, and I/O assignment against the manufacturer pin-description table. Because the device is no longer active, designers should also confirm configuration-file compatibility, programming-tool support, and supply availability before committing a new production design.

This page combines the device's speed, macrocell, I/O, voltage, and package characteristics with practical programming and design guidance. It also distinguishes verified technical attributes from replacement data, helping engineers evaluate legacy CPLD requirements before changing an existing PCB.

Alternativas directas para LC4128B-5T100C — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

No hay alternativas directas disponibles para este producto.

Solicitar alternativas

LC4128B-5T100C Valores máximos y características eléctricas

Device Type Complex Programmable Logic Device
Macrocell Count 128 macrocells
User I/O Count 64 pins
Programming Type In-System Programmable
Logic Family CMOS
Supply Voltage Options 3.3 V, 2.5 V, or 1.8 V
Speed Grade 5 ns
Maximum Operating Frequency 380 MHz
Minimum Propagation Delay 2.5 ns
Reported Internal Frequency 200 MHz
Reported Propagation Delay 4 ns
Global Clock Pins Up to 4 pins
Package Type 100-pin TQFP (14 x 14 mm)
Tipo de montaje Surface Mount
Package Code LFQFP

Guía de configuración de pines de LC4128B-5T100C lfqfp

Configuración de pines para LC4128B-5T100C (encapsulado lfqfp). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado lfqfp para LC4128B-5T100C

No hay datos detallados de patillaje disponibles para LC4128B-5T100C.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

LC4128B-5T100C es adecuado para 6 aplicacións: Industrial Control and Timing Logic, Bus Interface Decoding, Embedded Boot Sequencing, Peripheral Signal Conditioning, Communications Control Logic, Test and Measurement Control.

🏭

Industrial Control and Timing Logic

The LC4128B-5T100C fits centralized machine-control logic because its 128 macrocells can implement state machines, interlocks, timing sequences, and discrete decision logic while 64 user I/Os connect sensors, actuators, and status indicators. The manufacturer datasheet lists up to four global clock inputs with programmable polarity, allowing related timing domains to be consolidated. In-system programming also supports controlled logic revisions during commissioning. Because this is a legacy device, confirm its temperature grade and supply status, then validate every clock-domain crossing and I/O timing path against the manufacturer timing model.

🌐

Bus Interface Decoding

The LC4128B-5T100C can decode address, command, and status signals into internal enables and control outputs. Its 64 user I/Os provide sufficient external connectivity for parallel buses and peripheral-select logic, while the 128 macrocells support registered decoding, debounce, arbitration, and state tracking. The 5 ns grade and family timing envelope support compact interface functions that must operate close to surrounding digital circuitry. Engineers should establish setup and hold requirements from the manufacturer datasheet, use registered outputs where appropriate, and verify that the programmed pin assignments match the board-level bus connector and voltage levels.

🖥️

Embedded Boot Sequencing

The LC4128B-5T100C is appropriate for coordinating power-up events, reset sequencing, peripheral enables, and fault latches in an embedded control system. Its in-system programming characteristic permits the configuration to be revised during board bring-up, while programmable global clocks help organize state transitions across several control domains. With 128 macrocells and 64 user I/Os, sequencing functions can be consolidated without a large FPGA. In a new design, verify configuration access requirements and startup timing carefully; in a legacy repair, preserve the original programming file and pin assignment because a functionally similar CPLD may require a new board and configuration flow.

🔧

Peripheral Signal Conditioning

The LC4128B-5T100C can place programmable adaptation logic between a host processor and external peripherals. Typical functions include signal polarity conversion, latch-and-hold behavior, pulse qualification, status aggregation, and command decoding. The 64 user I/Os make it practical to connect several peripheral signals without relying on a large programmable-logic array. The manufacturer describes support for 3.3 V, 2.5 V, and 1.8 V configurations, which should be matched to the board's interface requirements. Confirm each signal's standard, direction, timing, and I/O-mode capability in the pin-description table before assigning the device.

📡

Communications Control Logic

The LC4128B-5T100C can implement protocol state machines, frame-control flags, counters, and command routing around a communications controller. Its 128 macrocells provide enough logic for multiple related functions, while programmable clock polarity supports coordination among external and internally registered signals. For equipment requiring deterministic behavior, use the manufacturer's timing reports rather than headline frequency values and include synchronization or isolation where a signal crosses between unrelated clock domains. The LC4128B family is obsolete, so a current-source program should confirm remaining inventory, programming-tool availability, and the exact configuration file before the part is committed to production.

🧪

Test and Measurement Control

The LC4128B-5T100C can consolidate trigger sequencing, mode control, status multiplexing, and front-panel logic around a test or measurement instrument. The 64 user I/Os support multiple control paths, and the device's programmable architecture makes it useful when the same hardware must support several instrument modes. Logic functions requiring accurate timing should use the speed-grade timing model and registered outputs. For new instruments, evaluate a currently supported programmable-logic device because toolchain, configuration-file, and lifecycle management are critical for production testing. For an existing instrument, confirm the original pinout, termination settings, and power rails before replacing the device.

What are the key specifications of LC4128B-5T100C that engineers should know?
The LC4128B-5T100C is a 128-macrocell, 64-user-I/O in-system programmable CPLD in a 100-pin TQFP package. According to the manufacturer datasheet, the ispMACH 4000 family supports 3.3 V, 2.5 V, and 1.8 V operation, up to 380 MHz maximum operating frequency, and 2.5 ns propagation delay. The -5 designation identifies the 5 ns speed grade, while the 100 suffix identifies the 100-pin package configuration.
What is the LC4128B-5T100C used for?
The LC4128B-5T100C is used for compact programmable control, timing, interface decoding, and state-machine logic. Its 128 macrocells, 64 user I/Os, and up to four global clocks allow multiple fixed-logic functions to be consolidated in one 100-pin TQFP device. According to the manufacturer datasheet, in-system programmability supports configuration updates without physically removing the device, which assists prototype debugging and controlled field maintenance.
Where can I download the LC4128B-5T100C datasheet PDF?
The LC4128B-5T100C datasheet PDF is available through the datasheet link on this page and through the listed document repositories. The manufacturer document identifies the part as a 3.3 V, 2.5 V, and 1.8 V in-system programmable SuperFAST high-density PLD. Use the pin-description table, timing diagrams, and ispMACH 4000 programming information in that document before assigning PCB signals or creating a configuration file.
Where can I find the LC4128B-5T100C pinout?
The authoritative LC4128B-5T100C pin assignment is in the pin-description table of the manufacturer datasheet. The package is a 100-pin TQFP with 64 user I/Os, so the complete package contains configuration, power, ground, clock, and general-purpose I/O connections rather than 64 external signals alone. Assign PCB tracks from the numbered package drawing and verify programming pins before fabrication.
Is LC4128B-5T100C an FPGA or a CPLD?
The LC4128B-5T100C is a CPLD, specifically an ispMACH 4000 family complex programmable logic device. It contains 128 macrocells and supports in-system programming. Unlike a register-rich FPGA architecture, it is optimized for compact combinational and sequential logic, predictable timing, and nonvolatile configuration storage within a 100-pin TQFP package.
What voltage does LC4128B-5T100C operate at?
The LC4128B-5T100C supports 3.3 V, 2.5 V, and 1.8 V supply configurations. According to the manufacturer datasheet, the supported operating rails allow the same device family to serve systems with different logic-voltage requirements. The actual design must follow the pin-specific power-connection and decoupling guidance in the datasheet for the selected voltage.
What is the LC4128B-5T100C propagation delay and maximum frequency?
The manufacturer datasheet lists a 2.5 ns minimum propagation delay and a 380 MHz maximum operating frequency for the ispMACH 4000 family. A component summary also reports a 4 ns propagation delay and 200 MHz internal frequency for this specific catalog entry. Timing closure should therefore use the manufacturer timing model and the speed grade applicable to the exact design rather than a generic device summary.
LC4128B-5T100C vs Lattice M4A5M32C - which is better for a new design?
The LC4128B-5T100C is better when an existing legacy PCB requires its 100-pin TQFP interface, 128 macrocells, and ispMACH 4000 configuration compatibility. A new design should compare the complete requirements against currently supported programmable-logic devices because the LC4128B family is obsolete and the replacement search identifies no current Lattice device with matching capacity. This comparison is functional and timing-related rather than a claim of package compatibility.
What is the difference between LC4128B-5T100C and LC4128B-5T100I?
The exact differences between LC4128B-5T100C and LC4128B-5T100I must be confirmed from the manufacturer ordering information and device data. The target catalog entry is identified as a 5 ns, 100-pin TQFP CPLD, while a temperature or grade suffix can alter qualification limits rather than package geometry. Confirm operating-temperature requirements, timing grade, and legacy programming-file support before considering either part for a replacement.
When should I choose LC4128B-5T100C over a newer CPLD or FPGA?
Choose the LC4128B-5T100C when maintaining an existing design that depends on its exact 100-pin TQFP footprint, 128 macrocells, ispMACH 4000 configuration format, and timing behavior. For a new PCB, a currently supported device is generally preferable when equivalent logic density, I/O count, timing, and toolchain support can be met. The legacy part is most defensible when redesign cost and certification risk outweigh newer-device benefits.
Is LC4128B-5T100C suitable for industrial control logic?
The LC4128B-5T100C can implement control and timing functions because it provides 128 macrocells, 64 user I/Os, programmable global clocks, and in-system reconfiguration. Suitability for a specific industrial product depends on its operating-temperature grade, electrical limits, reliability qualification, and lifecycle availability. Confirm those requirements in the manufacturer documentation and current sourcing channel before using this legacy device in a new industrial design.
What can replace LC4128B-5T100C?
No verified pin-compatible drop-in replacement for the LC4128B-5T100C was identified. The replacement search reports that the original is discontinued and finds zero current Lattice devices with similar capacity, so a package-compatible substitute cannot be named responsibly. A practical replacement normally requires a logic redesign, pinout change, timing revalidation, and recreation of the ispMACH configuration. Use the Request a Quote form on this page when sourcing the exact legacy part.
Is LC4128B-5T100C the same as an M4A5M32C?
No, the LC4128B-5T100C and M4A5M32C are not automatically interchangeable. The target is a discontinued 128-macrocell ispMACH 4000 CPLD in a 100-pin TQFP, while the M4A5M32C belongs to a different device family with its own package, macrocell architecture, I/O arrangement, and programming system. Treat any substitution as a redesign unless a manufacturer or authoritative cross-reference explicitly confirms pin-to-pin compatibility.
Where can I buy LC4128B-5T100C and what is its price?
Use the Request a Quote form on this page to request the current unit price, stock position, minimum order quantity, and lead time for the exact LC4128B-5T100C. The part is a legacy, obsolete catalog item, and quote-based handling is appropriate because availability and lifecycle conditions can change. Specify the 100-pin TQFP package, -5 speed grade, and C suffix ordering code to avoid receiving a different grade or temperature option.
What is the lead time and stock status for LC4128B-5T100C?
The current stock status and lead time for LC4128B-5T100C should be confirmed through the Request a Quote form on this page. Because the device is obsolete and remaining inventory may be limited or allocated, do not base production planning on a generic catalog page. Provide the required annual and production quantities, target date, and acceptable package condition so the supplier can confirm the current supply position.
Does LC4128B-5T100C support RoHS and AEC-Q100 qualification?
RoHS, REACH, and AEC-Q100 status must be confirmed from the manufacturer product documentation or a current compliance declaration because the listed catalog records do not state them. The LC4128B-5T100C is a commercial legacy CPLD, so automotive qualification should not be assumed merely because another device in the family carries an automotive suffix. Request the applicable compliance documents before using the part in regulated or automotive equipment.

Datos de referencia de ingeniería para LC4128B-5T100C — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the LC4128B-5T100C when repairing or maintaining equipment that already depends on its 100-pin TQFP footprint, 128 macrocells, 64 user I/Os, and ispMACH 4000 programming architecture. Its 5 ns speed grade and up-to-380-MHz family performance envelope can satisfy compact control, decoding, timing, and state-machine functions when the original configuration file and timing constraints are available. For a new design, prefer a currently supported programmable-logic device unless there is a compelling reason to reproduce a legacy platform. No verified drop-in replacement was identified, so modern alternatives should be treated as redesign candidates requiring footprint, toolchain, timing, and certification review rather than solder-in substitutions.

Comparación con alternativas

Parámetro Este producto
Brand Lattice Semiconductor
Package 100-pin TQFP (14 x 14 mm)
Device Type Complex Programmable Logic Device
Programming Type In-System Programmable
Macrocell Count 128 macrocells
User I/O Count 64 pins
Supply Voltage Options 3.3 V, 2.5 V, or 1.8 V
Maximum Operating Frequency 380 MHz
Minimum Propagation Delay 2.5 ns
Speed Grade 5 ns
Global Clock Pins Up to 4 pins
Lifecycle Status Obsolete

Diferenciadores clave

  • Provides a consolidated legacy CPLD implementation in one package (frente a Discrete logic implementation)
  • Supports in-system reconfiguration (frente a Mask-programmed or non-reconfigurable PLD)
  • Combines high logic density with legacy footprint continuity (frente a New 100-pin programmable-logic redesign)

Notas de diseño

Do not treat a similar 100-pin TQFP CPLD as a drop-in replacement without confirming the complete pin list, power rails, configuration interface, I/O standards, and programmable architecture. The LC4128B-5T100C uses an ispMACH 4000 configuration flow, and the available replacement search identifies no current Lattice device with matching capacity. Preserve the original JEDEC file and verify it with the intended programming tool before committing an order.

Follow the manufacturer board-layout and decoupling instructions rather than relying on a generic TQFP footprint. Place programming-interface access, clock inputs, and sensitive I/O paths with short, controlled traces; keep the power and ground distribution continuous across all package pins. Confirm the exposed pad or thermal arrangement only if the selected package drawing specifies one, and compare the land pattern directly against the 100-pin LFQFP/TQFP drawing before fabrication.

Create each interface timing constraint from the -5 speed-grade data, including clock skew, setup, hold, and output-delay values for the exact pin configuration. The family can reach 380 MHz maximum operating frequency, but that figure does not guarantee equal margins for every I/O path. Use registered logic for critical stages, constrain slow or externally generated clocks, and run post-route timing simulation against the actual board topology before release.

Select one of the documented 3.3 V, 2.5 V, or 1.8 V operating configurations and wire every power pin according to the manufacturer pin-description table. Apply the datasheet's recommended input and output decoupling values, with short ground returns and distributed supply capacitance. In a mixed-voltage system, verify that every connected I/O remains within its specified input and output limits; the core supply label alone does not make all pins voltage-tolerant.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The catalog records do not provide a verified compliance declaration. Obtain the applicable manufacturer or supplier documentation before releasing the legacy device into RoHS-, REACH-, or automotive-controlled production.

Datos verificados el: 2026-11-19 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

LC4128B-5T100C datasheet LC4128B-5T100C pinout LC4128B-5T100C datasheet pdf LC4128B-5T100C schematic LC4128B-5T100C equivalent LC4128B-5T100C replacement LC4128B-5T100C cross reference LC4128B-5T100C footprint LC4128B-5T100C spice model LC4128B-5T100C price LC4128B-5T100C stock Lattice LC4128B-5T100C LC4128B 100 TQFP pinout LC4128B application circuit

Componentes & términos relacionados

Lattice Semiconductor LC4128B-5T100C LC4128B ispMACH 4000 Complex Programmable Logic Device CPLD Programmable Logic Device In-System Programmable macrocell user I/O global clock propagation delay maximum operating frequency 3.3 V power 2.5 V power 1.8 V power TQFP-100 LFQFP surface-mount package in-system reconfiguration state machine bus decoding industrial control communications control obsolete lifecycle status
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ