LC4256B-5T100C - 227 MHz 256-Macro-Cell CPLD | Lattice
MPN: LC4256B-5T100C ✓ সক্রিয়LC4256B-5T100C সারাংশ
A CPLD, or complex programmable logic device, is a user-programmable semiconductor within the FPGA and programmable-logic hierarchy. It combines a structured array of logic and interconnect resources with configuration memory to implement control logic, protocol bridges, interface conditioning, and fixed-function logic replacement. Unlike software-driven processors, the LC4256B-5T100C executes its configured logic concurrently in hardware, giving predictable timing and compact implementation of multi-function control paths.
The defining resource is its set of 256 macro cells, which provide the logic capacity needed for moderate-density designs. The manufacturer designation identifies a nominal 227 MHz performance point in the SuperFAST family, while the -5 suffix identifies the associated speed grade. Multi-voltage operation covers 3.3 V, 2.5 V, and 1.8 V configurations, enabling integration with systems that use different logic levels across external interfaces and internal processing blocks.
The LC4256B-5T100C belongs to the ispMACH 4000B product family and uses in-system-programmable technology for configuration and reprogramming. This architecture is useful when a product must support field updates, production programming, or logic revisions without relying on a separate external FPGA configuration memory device. The 100-pin TQFP package also exposes a conventional leaded-surface-mount form suitable for automated assembly and prototype-to-production board transitions.
Typical uses include industrial control and data-acquisition interfaces, network and communications equipment, test and measurement systems, embedded instrumentation, and general-purpose peripheral logic consolidation. In each case, the device can combine several Boolean, state-machine, counter, qualification, and interface functions into one programmable component while maintaining deterministic hardware execution.
A critical design consideration is the relationship between system frequency, external interface voltage, timing constraints, and pin assignment. Engineers should use the pin-description table and timing information in the manufacturer datasheet when assigning board signals, especially for clock inputs, memory-like interfaces, and signals operating at different voltage levels. PCB layout should also preserve short, controlled routes for configuration, clock, and high-fanout nets.
This page consolidates the core device identity, family-level resource and frequency information, package details, practical implementation guidance, and same-footprint family options. It is designed to help engineers narrow the replacement decision quickly while still validating pin compatibility, timing, power behavior, and configuration requirements against the Lattice Semiconductor documentation before releasing production hardware.
এর জন্য ড্রপ-ইন বিকল্প LC4256B-5T100C — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible LC4256B-5T100C (একই form factor এবং footprint) — পার্থক্য রয়েছে Device Type, Programming Method.
LC4256B-5T100I
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →LC4256B-5TN100C
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
LC4256B-10T100C
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
LC4256B-75T100C
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
LC4256B-75TN100C
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
LC4256B-5T100C সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Device Type | In-system-programmable CPLD |
| Product Family | ispMACH 4000B SuperFAST high-density PLD |
| Macro Cell Count | 256 macro cells |
| Maximum System Frequency | 227 MHz |
| Nominal Speed Grade | -5 |
| Supported Supply Voltages | 3.3 V, 2.5 V, and 1.8 V |
| প্যাকেজ | 100-pin TQFP |
| মাউন্টিং টাইপ | Surface mount |
| Programming Method | In-system programming |
LC4256B-5T100C 100-pin tqfp পিন কনফিগারেশন গাইড
LC4256B-5T100C (100-pin tqfp প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি LC4256B-5T100C.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
LC4256B-5T100C এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Control Logic, Data-Acquisition Interface Conditioning, Network and Communications Equipment, Test and Measurement Instrumentation, Embedded Peripheral Consolidation, Programmable Sensor and Actuator Hub.
Industrial Control Logic
The LC4256B-5T100C fits industrial control designs that consolidate deterministic sequencing, interlocks, counters, alarm logic, and peripheral command decoding into one programmable device. Its 256 macro cells provide moderate logic capacity, while the 227 MHz maximum system frequency supports clocked control paths without using a general-purpose processor for every function. In-system programming permits production configuration and controlled field updates. Engineers should validate the selected commercial or industrial ordering grade against the enclosure temperature, vibration environment, and applicable reliability requirements.
সুপারিশকৃত
Data-Acquisition Interface Conditioning
The LC4256B-5T100C can implement acquisition front-end control logic, sample sequencing, channel selection, trigger conditioning, and digital status decoding. Its 256 macro cells are suitable for combining multiple finite-state machines and handshake circuits, while the 227 MHz system-frequency rating provides timing headroom for common parallel-control architectures. Multi-voltage support can assist board partitioning across 3.3 V, 2.5 V, and 1.8 V domains, subject to the per-pin voltage and interface rules in the manufacturer datasheet.
সুপারিশকৃত
Network and Communications Equipment
For networking equipment, the LC4256B-5T100C can implement protocol framing helpers, command queues, status registers, interface isolation, and board-level fault logic. The 256 macro cells allow several related functions to be consolidated without moving the entire design into a large FPGA. Its 227 MHz maximum system frequency is useful for synchronous control logic, and in-system programming supports controlled configuration during manufacturing or maintenance. External memory, transceiver, and clock interfaces must be checked against the device's I/O and timing limits.
সুপারিশকৃত
Test and Measurement Instrumentation
The LC4256B-5T100C suits test and measurement instruments that require deterministic sequencers, trigger logic, channel routing, timing gates, and front-panel state control. The 256-macro-cell resource allows parallel acquisition and control functions to be consolidated, while the 227 MHz maximum system frequency supports high-speed coordination around slower sensors and converters. In-system programming simplifies board bring-up and configuration revision. Signal-integrity planning should isolate clocks, sensitive analog returns, and high-fanout control lines to reduce crosstalk and timing uncertainty.
সুপারিশকৃত
Embedded Peripheral Consolidation
The LC4256B-5T100C is useful for consolidating miscellaneous embedded-system functions such as reset sequencing, watchdog logic, interrupt arbitration, timer extension, bus decoding, and peripheral mode control. Its moderate 256-macro-cell capacity can replace a collection of small programmable and fixed-function devices while keeping the implementation in one 100-pin TQFP package. The 227 MHz maximum system frequency permits straightforward synchronous logic, and the multi-voltage architecture supports mixed-generation boards. Verify every interface voltage and pin direction before final schematic assignment.
সুপারিশকৃত
Programmable Sensor and Actuator Hub
The LC4256B-5T100C can coordinate sensor reads, actuator enables, safety interlocks, calibration sequences, and communication handshakes in a compact programmable hub. Its 256 macro cells support multiple concurrent state machines, and the 227 MHz system-frequency rating gives designers room for synchronous sampling and digital filtering. In-system programming allows the same PCB to support revised sensor configurations or firmware-driven hardware behavior. The external sensor interfaces should remain compatible with the available I/O standards, and the temperature grade must match the deployment environment.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা LC4256B-5T100C — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | LC4256B-5T100I | LC4256B-5TN100C | LC4256B-10T100C | LC4256B-75T100C | LC4256B-75TN100C |
|---|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | TQFP-100 | TQFP-100 | TQFP-100 | TQFP-100 | TQFP-100 | TQFP-100 |
| Device Type | In-system-programmable CPLD | In-system-programmable CPLD | In-system-programmable CPLD | In-system-programmable CPLD | In-system-programmable CPLD | In-system-programmable CPLD |
| Macro Cell Count | 256 macro cells | 256 macro cells | 256 macro cells | 256 macro cells | 256 macro cells | 256 macro cells |
| Speed Designation | -5 | -5 | -5 | -10 | -75 | -75 |
| Programming Method | In-system programming | In-system programming | In-system programming | In-system programming | In-system programming | In-system programming |
| Special Ordering Feature | Commercial-ordering suffix | Industrial-ordering suffix | TN device-grade suffix | -10 speed grade | -75 speed grade | -75 speed grade with TN device-grade suffix |
মূল পার্থক্যসমূহ
- Balanced 227 MHz performance and moderate logic density (বনামLC4256B-75T100C)
- Commercial-grade ordering configuration (বনামLC4256B-5T100I)
- Same-footprint timing alternatives for design optimization (বনামLC4256B-10T100C)
- Multi-voltage in-system-programmable integration (বনামLC4256B-75TN100C)
ডিজাইন নোট
Assign the design against the manufacturer TQFP-100 package drawing and pin-description table before routing. Keep clock and configuration traces short, use a continuous ground reference beneath the device, and avoid routing high-speed or switching signals between adjacent clock inputs. Confirm land pattern, lead pitch, solder-mask clearance, and assembly tolerances against the package drawing rather than relying only on the generic TQFP label.
Use the manufacturer timing tables to establish worst-case setup, hold, clock skew, and I/O delay for every synchronous path. The 227 MHz maximum system frequency is a headline capability rather than a guarantee for every pin and I/O standard. Constrain clock routes, add source termination where the output characteristics require it, and keep external clock and configuration traces away from noisy analog or switching nodes.
Plan the 3.3 V, 2.5 V, or 1.8 V supply arrangement according to the exact configuration used by the design. Place stable decoupling capacitors at the power pins, keep their current loops compact, and separate noisy digital return paths from sensitive analog ground references. Calculate worst-case supply current, inrush during configuration, and voltage tolerances from the manufacturer electrical characteristics before finalizing the power tree.
Do not substitute an LC4256B option solely because the package names match. Compare the speed designation, device-grade suffix, I/O standards, configuration behavior, temperature range, and supply requirements. In particular, changing from -5 to -10 or -75 alters the timing class, while changing C, I, or TN changes the ordering-grade interpretation. Complete a manufacturer-datasheet sign-off before releasing a substitute to production.
কমপ্লায়েন্স তথ্য
The LC4256B-5T100C is a programmable-logic IC rather than an automotive-qualified component. Exact RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations must be confirmed for the selected ordering code through the manufacturer product page or declaration documentation.