Texas Instruments

LM224DG4 - Quad General-Purpose Op Amp | Texas Instruments

MPN: LM224DG4 ✓ সক্রিয়
3 V to 32 V Vdss 14-pin SOIC Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

LM224DG4 সারাংশ

The Texas Instruments LM224DG4 is a standard general-purpose quadruple operational amplifier containing four independent amplifier circuits in a 14-pin SOIC package. It is designed for instrumentation, signal-conditioning, buffer-amplifier, and general analog-control applications where a multi-amplifier package simplifies PCB routing and reduces the number of individual components. The LM224 family operates across a 3 V to 32 V supply range and is suitable for single-supply or split-supply circuit arrangements.

An operational amplifier is a voltage-gain device that uses differential feedback to amplify the difference between two input voltages. The LM224DG4 belongs to the operational-amplifier hierarchy, combining four high-gain, internally compensated amplifier channels in one integrated circuit. This quad-channel arrangement is useful when a system needs several closely related signal-processing stages, such as sensor conditioning, active filtering, or buffering multiple analog channels.

The principal benefit of the four-channel architecture is board-space efficiency. Instead of placing four separate single op amps on a PCB, a designer can use one 14-SOIC device and distribute the amplifier channels according to signal flow. The standard general-purpose classification makes the LM224DG4 appropriate for non-specialized analog functions, although precision requirements should be checked against the manufacturer's electrical characteristics before selecting it for high-accuracy instrumentation.

The wide 3 V to 32 V operating range provides flexibility for industrial, instrumentation, sensing, and test-equipment designs. Operation from a single positive supply simplifies circuits where the signal is referenced to ground, while split supplies can support bipolar signal processing. Because four amplifiers share one package, power-supply routing and decoupling must be designed to keep common supply impedance and package-level heating low.

Typical uses include sensor-interface amplifiers, low-frequency active filters, analog signal conditioners, transducer amplifiers, sample-and-hold support circuits, and general-purpose buffers. The LM224DG4 is especially useful when multiple amplifier channels are required but the precision, speed, noise, or rail-to-rail performance of a specialized amplifier is not required.

Designers should verify input common-mode range, output swing, supply current, slew rate, and stability requirements against the Texas Instruments LM224 product documentation. Place the package power pins and bypass capacitor according to the datasheet guidance, maintain adequate operating area for thermal dissipation, and avoid relying on rail-to-rail operation unless the selected grade explicitly supports it.

This product page combines package information, application guidance, drop-in replacement analysis, comparison parameters, and practical layout notes. It is intended to accelerate engineering selection while directing detailed verification to the manufacturer datasheet and pin-description tables.

এর জন্য ড্রপ-ইন বিকল্প LM224DG4 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible LM224DG4 (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Amplifier Type, Number of Amplifier Circuits, AEC-Q100 Qualification, Product Type.

Texas Instruments
Package: 14-SOIC
Number of Amplifier Circuits: 4 circuits
AEC-Q100 Qualification: unknown
এর সাথে তুলনা করুন LM224DG4 →
Texas Instruments
Amplifier Type: General-purpose operational amplifier
এর সাথে তুলনা করুন LM224DG4 →
Texas Instruments
Package: 14-SOIC
Amplifier Type: General-purpose operational amplifier
এর সাথে তুলনা করুন LM224DG4 →
Texas Instruments
Package: 14-SOIC, 3.90 mm width
Amplifier Type: General Purpose
Number of Amplifier Circuits: 4
এর সাথে তুলনা করুন LM224DG4 →
Texas Instruments
Package: 14-SOIC
Amplifier Type: General-purpose operational amplifier
Number of Amplifier Circuits: 4 circuits
এর সাথে তুলনা করুন LM224DG4 →

LM224KAD

✅ ড্রপ-ইন
Texas Instruments
📦 14-pin SOIC
General-purpose operational amplifier · 4 channels · 3 V to 32 V · ±16 V · 1.2 MHz · 2 kV · 14-pin SOIC · 14 pins

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LM224DR

✅ ড্রপ-ইন
Texas Instruments
📦 14-pin SOIC
Standard general-purpose operational amplifier · 4 circuits · 14-SOIC · Surface mount

✓ স্টকে আছে

$0.1641 / ইউনিট

ডেটাশিট দেখুন →

LM224KD

✅ ড্রপ-ইন
Texas Instruments
📦 14-pin SOIC
4 circuits · 1.2 MHz · 3 V to 32 V · 32 V · ±16 V · 14-SOIC · 3.90 mm · 0.154 inch

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LM324DG4

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Texas Instruments
📦 14-pin SOIC
General-purpose operational amplifier · 4 circuits · 1.2 MHz · 14-SOIC · 3.90 mm · 0 °C to 70 °C · 0.8 mA per amplifier · Includes ground

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LM2902DG4

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Texas Instruments
📦 14-pin SOIC
General Purpose · 4 · Quad · 26 V · ±13 V · ±1.5 V to ±13 V · 1.2 MHz · 0.5 V/µs

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LM224DG4 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Product Type Quadruple operational amplifier
Amplifier Circuit Count 4 circuits
Operating Supply Voltage Range 3 V to 32 V
প্যাকেজ 14-pin SOIC
মাউন্টিং টাইপ Surface mount
Device Class Standard general-purpose amplifier
Number of Amplifiers 4
Supply Configuration Single or split supply

LM224DG4 পিন কনফিগারেশন

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
পিন 1 OUT1 — Output of amplifier channel 1
পিন 2 IN1- — Inverting input of amplifier channel 1
পিন 3 IN1+ — Non-inverting input of amplifier channel 1
পিন 4 V- — Negative power supply connection
পিন 5 IN2+ — Non-inverting input of amplifier channel 2
পিন 6 IN2- — Inverting input of amplifier channel 2
পিন 7 OUT2 — Output of amplifier channel 2
পিন 8 OUT3 — Output of amplifier channel 3
পিন 9 IN3- — Inverting input of amplifier channel 3
পিন 10 IN3+ — Non-inverting input of amplifier channel 3
পিন 11 V+ — Positive power supply connection
পিন 12 IN4- — Inverting input of amplifier channel 4
পিন 13 IN4+ — Non-inverting input of amplifier channel 4
পিন 14 OUT4 — Output of amplifier channel 4

সাধারণ ব্যবহার

LM224DG4 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Sensor Signal Conditioning, Active Filters and Audio Control, Test and Measurement Instrumentation, Battery-Powered Monitoring Devices, Interface Buffering and Level Conversion, Power Supply Monitoring and Control Loops.

🏭

Industrial Sensor Signal Conditioning

The LM224DG4 fits industrial sensor-conditioning circuits that require several amplifier stages within one 14-pin SOIC package. Its four amplifier channels can provide non-inverting gain, inverting gain, buffering, and level conversion around sensors such as temperature, pressure, and position transducers. The 3 V to 32 V supply range supports both low-voltage electronics and 24 V industrial systems. Designers should verify the sensor’s output range against the input common-mode limits, confirm adequate output swing, and check the amplifier grade’s operating-temperature range before production release.

🎧

Active Filters and Audio Control

The four-channel LM224DG4 can implement low-frequency active filters, tone-control stages, and general audio signal-conditioning paths without requiring four separate packages. Feedback networks determine the closed-loop response, while the shared quad-device construction simplifies routing between adjacent filter stages. The broad 3 V to 32 V supply capability accommodates multiple analog rails, but the selected circuit must stay within the amplifier’s common-mode range and output-swing limits. Check gain-bandwidth and slew-rate requirements against the manufacturer’s typical curves for the exact LM224 grade.

🖥️

Test and Measurement Instrumentation

LM224DG4 is useful in general-purpose test and measurement front ends where four buffered or amplified channels are required. Possible uses include sensor conditioning, differential-to-single-ended conversion, reference buffering, and gain stages around measurement bridges. Its 14-pin SOIC package reduces board area, while the wide 3 V to 32 V supply range supports bench and industrial instrumentation power systems. Precision designs should check input offset, bias current, noise, and drift against the requirements of the measurement rather than treating the general-purpose amplifier as automatically precision-qualified.

📱

Battery-Powered Monitoring Devices

The LM224DG4 can serve as the analog amplification core in battery-powered environmental monitors, portable meters, and sensor interfaces. Four channels allow the device to support several sensor paths while sharing one package and supply rail. The LM224 family’s 3 V minimum supply rating supports common single-cell and multi-cell operating ranges, but total quiescent current contributes directly to battery life. Confirm channel-current consumption, output load capability, and low-voltage behavior in the manufacturer datasheet, then select output values that avoid forcing the amplifier into nonlinear operation.

🧩

Interface Buffering and Level Conversion

The LM224DG4 can buffer sensor outputs before they enter an ADC or microcontroller input and can perform voltage-level shifting where the source and destination limits are compatible with the amplifier’s input and output ranges. Quad-channel availability is valuable in multiplexed measurement systems where several analog lines require buffering. The device should not automatically be used as a logic-level translator without checking common-mode limits, output swing, and source impedance. Place short, quiet input routes and provide local supply bypassing to prevent added noise or instability.

⚡

Power Supply Monitoring and Control Loops

The LM224DG4 can implement amplifier-based monitoring, threshold comparison, and error-amplifier functions in 24 V industrial or control systems because its operating supply range extends to 32 V. Multiple channels can monitor separate rails or assist with feedback and fault handling. The output must remain inside the allowed swing, and any comparator-style configuration requires the correct polarity and feedback arrangement. Designers should also account for the four amplifiers’ combined package dissipation, input common-mode limits, and stability requirements rather than evaluating only one channel in isolation.

What is the LM224DG4?
The LM224DG4 is a Texas Instruments quadruple operational amplifier with four independent amplifier circuits in a 14-pin SOIC package. According to the Texas Instruments LM224 product page, the LM224 is a general-purpose operational amplifier family designed for instrumentation and other analog signal-processing applications. Its four-channel construction allows one package to provide multiple gain, buffering, filtering, or signal-conditioning functions.
What is the operating voltage of LM224DG4?
The LM224DG4 operates across a 3 V to 32 V supply-voltage range. The manufacturer documentation for the LM224 family identifies operation from a single positive supply as well as split-supply configurations. The actual usable signal range remains limited by input common-mode and output-swing limits, so the supply rating should not be interpreted as permission to use the full 32 V as a signal rail.
Where can I download the LM224DG4 datasheet PDF?
The official LM224DG4 documentation is reached through the Texas Instruments LM224 product page at https://www.ti.com/product/LM224. From that page, use the datasheet link to obtain the manufacturer PDF containing electrical characteristics, pin assignments, typical-performance graphs, application guidance, and ordering information. Third-party copies should be used only as a secondary reference because revisions and package details may differ.
Where can I find the LM224DG4 pinout?
The LM224DG4 pinout is documented in the Texas Instruments LM224 datasheet and on the LM224 product page. The device uses a 14-pin SOIC with four amplifier sections, power connections, and no-connect positions where applicable. Assign PCB nets from the datasheet pin-description table rather than relying only on an amplifier-family drawing, because some quad devices interchange amplifier-output and power-pin positions.
What are the key specifications of LM224DG4 that engineers should know?
The LM224DG4 is a 4-circuit general-purpose operational amplifier in a 14-pin SOIC package, with a 3 V to 32 V operating supply range. The Texas Instruments LM224 product page identifies the device as a high-performance amplifier suitable for instrumentation. Exact gain-bandwidth, offset, bias-current, slew-rate, and temperature limits should be taken from the grade-specific manufacturer datasheet before final circuit sign-off.
Can LM224DG4 be used with a single 5V supply?
The LM224DG4 can operate from a 5 V supply because 5 V lies within the LM224 family’s 3 V to 32 V supply range. Signal conditioning remains practical when the input and output stay within the device’s common-mode and output-swing limits. For a 0-to-5 V sensor interface, bias the signal near mid-supply when the source cannot produce negative voltages, and verify the required output range against the datasheet.
Is LM224DG4 suitable for sensor signal conditioning?
The LM224DG4 is suitable for many sensor signal-conditioning stages because it provides four general-purpose amplifier channels and a 3 V to 32 V supply range. It can implement non-inverting and inverting gain, buffers, and active filters when the required gain, bandwidth, offset, and output swing are acceptable. Sensor-specific suitability should be checked against the sensor output range and the amplifier grade’s operating-temperature limits.
What can replace LM224DG4?
The LM224KAD is the strongest documented drop-in candidate for LM224DG4. The cross-reference description identifies it as a 14-pin, four-channel SOIC with consistent terminals and package characteristics, allowing replacement without PCB changes. Other LM224 package or temperature-grade variants may also fit electrically, but each selected MPN should be checked against the required operating-temperature grade, supply range, and exact pinout.
Is LM224DG4 the same as LM224KAD?
The LM224DG4 and LM224KAD are both four-channel, 14-pin SOIC devices in the Texas Instruments LM224 family, but their ordering suffixes can denote different grade or qualification conditions. The cross-reference information describes the LM224KAD as completely replaceable because its terminals and package are consistent. Confirm the exact temperature range, orderable status, and manufacturer marking requirements before treating the suffix change as production-equivalent.
When should I choose LM224DG4 over LM224KAD?
Choose LM224DG4 when its specified operating-temperature grade and qualification level match the product’s environmental requirements. Choose LM224KAD when a broader industrial temperature qualification is needed while retaining the same 14-pin four-channel SOIC interface. The documented replacement relationship makes PCB reuse straightforward, but the correct variant should be selected from its individual manufacturer ordering and electrical-characteristic tables.
Is LM224DG4 suitable for industrial control systems?
The LM224DG4 can be used in industrial control and instrumentation circuits when its operating-temperature range and electrical limits satisfy the system requirements. Its 3 V to 32 V supply range is useful for 24 V industrial environments, provided the input and output remain within their specified linear ranges. Confirm the exact grade, isolation requirements, EMC design, and environmental qualification during the design review.
Where can I buy LM224DG4 online?
Use the Request a Quote form on this page to request LM224DG4 availability, lead time, and a current quotation from XAIPART. The form allows the requested quantity, target package, and delivery requirements to be reviewed without relying on a potentially stale static price. Production traceability and authorized-channel status should be confirmed before placing a new-design order.
What is the price of LM224DG4?
The current LM224DG4 quotation is generated through the Request a Quote form on this page. Market pricing and availability can vary with quantity, date, and fulfillment terms, so a fixed price in product copy can become inaccurate. Submit the required quantity and delivery location to receive a current commercial response for the exact LM224DG4 ordering code.
What is the lead time for LM224DG4?
The current LM224DG4 lead time is confirmed through the Request a Quote form on this page. Lead time can depend on manufacturing inventory, order volume, and the date the order is confirmed. For production planning, provide the forecast quantities and required delivery schedule so the fulfillment response can distinguish immediate allocation from a factory order.
Is LM224DG4 in stock?
LM224DG4 stock status is checked through the Request a Quote form on this page because availability changes with order quantity and replenishment timing. Submit the exact MPN, quantity, and target delivery date to obtain a current allocation response. Engineers should avoid treating a generic family-level stock indication as confirmation of the DG4 package suffix.
What is the best TI equivalent for LM224DG4?
The best documented TI drop-in equivalent is the LM224KAD because it retains four amplifier channels, 14 SOIC pins, and consistent terminal assignments while offering a different ordering grade. The manufacturer’s LM224 family is the natural starting point for an exact-footprint replacement. If LM224KAD does not meet the required temperature grade or qualification, evaluate another explicitly documented 14-pin four-channel alternative rather than assuming functional similarity guarantees interchangeability.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা LM224DG4 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose LM224DG4 when a design needs four general-purpose amplifier channels in a standard 14-pin SOIC and operates within the 3 V to 32 V supply range. It is a practical choice for sensor conditioning, buffering, active filtering, and instrumentation where four separate single op amps would increase board area. Choose LM224KAD when the documented drop-in interface is needed but the ordering grade better matches the environmental requirements. LM224DR and LM224KD can also be evaluated when their individual temperature and qualification conditions are suitable. Use LM324DG4 or LM2902DG4 only after comparing their supply range, input common-mode limits, offset, bandwidth, noise, and operating-temperature grade. For all alternatives, confirm the exact 14-pin assignments and perform stability and output-swing checks in the final circuit rather than relying on package equivalence alone.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য LM224KAD LM224DR LM224KD LM324DG4 LM2902DG4
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC
Amplifier Channel Count 4 channels 4 channels 4 channels 4 channels 4 channels 4 channels
Pin Count 14 pins 14 pins 14 pins 14 pins 14 pins 14 pins
Device Class Standard general-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier
Drop-In Compatibility 14-pin SOIC LM224 reference device Documented as completely replaceable Same package family; grade verification required Same package family; grade verification required Same package and channel count; electrical verification required Same package and channel count; electrical verification required

মূল পার্থক্যসমূহ

  • Documented same-footprint replacement option (বনামLM224KAD)
  • Quad-channel integration reduces package count (বনামLM324DG4)
  • Wide operating supply range (বনামLM2902DG4)

ডিজাইন নোট

Place the supply-bypass capacitor immediately adjacent to the LM224DG4 positive and negative supply pins, with the shortest practical ground return. Keep amplifier input routing away from supply, clock, and switching-node traces because input capacitance combined with feedback resistance can amplify coupling into an analog signal. Use a solid ground plane and provide separate copper areas for sensitive inputs and outputs when the circuit handles low-level signals.

Calculate dissipation from the total voltage drop across all four channels and the total supply current rather than evaluating one amplifier in isolation. Four channels can create package-level heating even when each channel appears lightly loaded. Confirm the maximum supply, output swing, and channel-current limits in the manufacturer datasheet, and provide adequate copper area so the SOIC package does not become the thermal bottleneck.

Do not treat a 32 V supply rating as a 32 V signal-swing rating. Input common-mode voltage and output swing are separate electrical limits, especially with a single positive supply. Similarly, a pin-compatible replacement is only electrically interchangeable after its input range, offset, bias current, bandwidth, slew rate, noise, stability, and temperature grade have been compared. Use the exact ordering-code datasheet for final sign-off.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for the exact LM224DG4 ordering code.

ডেটা যাচাই করা হয়েছে: 2026-11-10 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

LM224DG4 datasheet LM224DG4 datasheet pdf LM224DG4 pinout LM224DG4 specifications LM224DG4 equivalent LM224DG4 replacement LM224DG4 cross reference LM224DG4 vs LM224KAD LM224DG4 price LM224DG4 stock Texas Instruments LM224DG4 LM224DG4 14-SOIC pinout LM224DG4 sensor signal conditioning LM224DG4 active filter where to buy LM224DG4

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments LM224DG4 LM224 LM224KAD LM224DR LM224KD LM324DG4 LM2902DG4 quad operational amplifier operational amplifier amplifier IC integrated circuit semiconductor 14-pin SOIC SOIC package family surface-mount package single-supply operation split-supply operation sensor signal conditioning active filter signal buffering input common-mode voltage output voltage swing gain bandwidth product instrumentation
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন