Texas Instruments

LM2904QP - Dual 26V 700kHz Op-Amp TSSOP-8 | Texas Instruments

MPN: LM2904QP ✓ সক্রিয়
up to 26 V Vdss 0.7 mA (typ) Id TSSOP-8 (PW) Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

LM2904QP সারাংশ

The Texas Instruments LM2904QP is a dual general-purpose operational amplifier rated for 26 V supply operation with a 700 kHz gain-bandwidth product, housed in an 8-pin TSSOP (PW) package. As a Q-suffix automotive-grade variant, it is AEC-Q100 qualified and specified from -40C to +125C, making it suited to vehicle and harsh-environment electronics.

A dual operational amplifier is an integrated circuit that packs two independent, internally frequency-compensated op amps onto a single silicon die within one package. Op amps are the foundational building blocks of the analog signal chain, sitting within the broader hierarchy of amplifier ICs, linear ICs, and semiconductors, and they perform amplification, buffering, filtering, comparison, and level shifting in virtually every electronic system.

Key features of the LM2904QP include operation from a single supply or dual supplies, a low supply-current drain of approximately 0.7 mA typ that is largely independent of supply voltage, and a common-mode input voltage range that includes ground, allowing direct sensing of signals near 0 V in single-supply systems. The two channels are closely matched, reducing board space versus discrete single-channel amplifiers.

Technically, the LM2904 family uses internally compensated bipolar technology, which guarantees unity-gain stability without external compensation components. The ground-inclusive input common-mode range and single-supply capability eliminate the need for a negative rail in low-side sensing applications, while the 700 kHz bandwidth covers audio, low-speed control loops, and general industrial signal conditioning. Low input bias and offset currents minimize error in high-impedance source applications.

Typical applications include automotive sensor signal conditioning, low-side current sensing, active filters, transducer amplifiers, and battery-powered industrial instrumentation, where single-supply operation near ground and wide temperature tolerance are essential.

Design consideration: the output cannot swing rail-to-rail, so allow headroom on both rails and verify the output swing specification in the manufacturer datasheet against your signal range, especially at elevated temperature and light load.

This page synthesizes the manufacturer product data, drop-in alternatives, comparison tables, and practical design notes in one place, providing engineering context beyond a raw parametric listing.

এর জন্য ড্রপ-ইন বিকল্প LM2904QP — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible LM2904QP (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Amplifier Type, Gain-Bandwidth Product, Operating Temperature Range, Automotive Qualification.

Texas Instruments
Package: 8-pin TSSOP
Amplifier Type: General-purpose operational amplifier
Gain-Bandwidth Product: 1.2 MHz
এর সাথে তুলনা করুন LM2904QP →
Texas Instruments
Package: 8-pin TSSOP (PW)
Amplifier Type: General Purpose
Gain-Bandwidth Product: 700 kHz
এর সাথে তুলনা করুন LM2904QP →
Texas Instruments
Package: 8-pin TSSOP
Amplifier Type: General-purpose operational amplifier
Gain-Bandwidth Product: 700 kHz
এর সাথে তুলনা করুন LM2904QP →
STMicroelectronics
Package: 8-TSSOP
Amplifier Type: Dual general-purpose operational amplifier
Gain-Bandwidth Product: 1.1 MHz
এর সাথে তুলনা করুন LM2904QP →

LM2904QPWRQ1

✅ ড্রপ-ইন
Texas Instruments
📦 TSSOP-8 (PW)
General-purpose operational amplifier · 2 channels · 26 V · 700 kHz · AEC-Q100 qualified · 8-pin TSSOP · Surface mount · Yes

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LM2904BQPWRQ1

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Texas Instruments
📦 TSSOP-8 (PW)
General-purpose operational amplifier · 2 channels · 36 V · 1.2 MHz · -40°C to 125°C · 8-pin TSSOP · Surface mount · AEC-Q100 qualified

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LM2904BQPWR

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 TSSOP-8 (PW)
same B-grade improved die, standard (non-Q1) temperature grade, same TSSOP-8 footprint and pinout

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

LM2904QPWRG4Q1

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Texas Instruments
📦 TSSOP-8 (PW)
General Purpose · 2 circuits · Dual, independent operational amplifier · 26 V · 700 kHz · 0.3 V/µs · 0.7 mA typical per amplifier · Includes ground

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LM2904YPT

✅ ড্রপ-ইন
STMicroelectronics
📦 TSSOP-8
Dual general-purpose operational amplifier · 2 channels · Single-ended output per channel · 1.1 MHz · 100 dB · Low power · 8-TSSOP · Surface mount

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LM2904QP সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Number of Channels 2
Supply Voltage Range (single supply) up to 26 V
Gain Bandwidth Product 700 kHz
Supply Current (per amplifier) 0.7 mA (typ)
Common-Mode Input Voltage Range Includes ground
Input Type Bipolar, internally compensated
Automotive Qualification AEC-Q100 qualified (Q package)
অপারেটিং তাপমাত্রার পরিসর -40C to +125C
প্যাকেজ TSSOP-8 (PW)
মাউন্টিং টাইপ Surface Mount
RoHS স্ট্যাটাস Compliant

LM2904QP পিন কনফিগারেশন

TSSOP-8 Package Pinout Diagram TSSOP-8 8-pin thin shrink small outline, P0.65mm, JEDEC MO-153. 1 8 2 7 3 6 4 5 TSSOP-8
পিন 1 OUT1 — Output of amplifier 1
পিন 2 IN1- — Inverting input of amplifier 1
পিন 3 IN1+ — Non-inverting input of amplifier 1
পিন 4 V-/GND — Negative supply or ground (single supply)
পিন 5 IN2+ — Non-inverting input of amplifier 2
পিন 6 IN2- — Inverting input of amplifier 2
পিন 7 OUT2 — Output of amplifier 2
পিন 8 V+ — Positive supply

সাধারণ ব্যবহার

LM2904QP এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Automotive Sensor Signal Conditioning, Low-Side Current Sensing, Active Filters and Signal Chains, Battery-Powered Portable Instrumentation, Industrial Control and PLC I/O, Audio Pre-Amplification in Automotive and Consumer Systems.

🚗

Automotive Sensor Signal Conditioning

The LM2904QP is AEC-Q100 qualified for the -40C to +125C automotive temperature range, which makes it a natural fit for conditioning signals from throttle position sensors, coolant temperature sensors, MAP/MASS airflow transducers, and battery voltage dividers. Its 26 V rating covers automotive 12 V load-dump transients with modest series protection, and the common-mode input range extending to ground allows direct amplification of low-side sensor outputs without a negative rail. Each of the two matched channels can serve an independent sensor path, halving component count versus single-channel amplifiers. Place a small RC filter (for example 1 kOhm and 100 nF) at each input to reject automotive EMC transients, and keep closed-loop bandwidth well below the 700 kHz limit to preserve phase margin in the presence of wiring capacitance.

⚡

Low-Side Current Sensing

Because the LM2904QP's common-mode input voltage range includes ground, it can directly amplify the small voltage across a low-side shunt resistor without lifting the input above the rail. A typical single-supply configuration places a 5 to 20 mOhm shunt in the ground return path, amplifies the drop with a gain of 20 to 100 using two precision resistors, and feeds an ADC on a microcontroller. The 0.7 mA typ per-channel supply current suits battery-powered monitoring nodes, while the 700 kHz bandwidth comfortably handles overcurrent-detection loops. Design caveat: the bipolar input stage draws bias current that develops error across large shunt/source impedances, so keep resistor values moderate, and remember the output cannot reach the true ground rail - bias the output slightly above ground or account for the offset in firmware calibration.

🔧

Active Filters and Signal Chains

The LM2904QP's internally compensated, unity-gain-stable bipolar architecture lets each channel implement Sallen-Key or multiple-feedback active filters up to a few tens of kilohertz without external compensation. In automotive and industrial control boards it commonly forms anti-aliasing filters ahead of ADC inputs, band-limiting filters for PWM feedback, and conditioning stages for analog setpoints. The 700 kHz gain-bandwidth product supports Q values up to roughly 10 at 10 kHz cutoffs while maintaining gain accuracy; for higher-frequency filters select a wider-bandwidth amplifier. The dual-channel package enables a two-stage cascaded filter in one footprint, and the 26 V rating allows filtering of signals referenced to 12 V and 24 V industrial rails. Use 1% resistors and C0G capacitors to control filter corner tolerance across temperature.

📱

Battery-Powered Portable Instrumentation

With approximately 0.7 mA typ supply current per amplifier and single-supply operation from low voltages, the LM2904QP suits battery-operated meters, gas detectors, weigh scales, and handheld test instruments. The ground-inclusive input common-mode range means signals generated near 0 V, such as photodiode or thermocouple outputs referenced to ground, can be amplified directly. The dual configuration provides a signal channel plus a spare for filtering, buffering, or a voltage reference buffer within a single 8-pin TSSOP, saving board area in compact enclosures. For maximum battery life, verify the supply current over the full supply range since the drain is specified as largely independent of supply voltage, and power the device from a regulated rail if input signals approach the upper common-mode limit near V+.

🏭

Industrial Control and PLC I/O

On 24 V industrial rails the LM2904QP's 26 V rating requires modest headroom, and it is widely used in PLC analog input modules, 4-20 mA receiver loops, and actuator drive conditioning where cost and robustness dominate. The wide -40C to +125C Q-grade temperature range covers sealed control cabinets and motor-drive environments, and each dual package handles one transmit and one receive conditioning path. The 700 kHz bandwidth is more than sufficient for 4-20 mA loop bandwidths of a few hundred hertz and for PWM current-loop feedback filtering below 10 kHz. For industrial use, add input series resistance and clamp diodes for IEC surge exposure, and ensure the output stage load does not pull the swing away from the ADC reference range at the connected controller.

🎧

Audio Pre-Amplification in Automotive and Consumer Systems

The LM2904QP's 700 kHz bandwidth exceeds the full audio band by more than an order of magnitude, and its dual matched channels are well matched for stereo pre-amplifiers, microphone buffers, and tone-control stages in automotive head units and low-cost consumer audio. The 26 V rating permits operation from vehicle battery rails or 24 V audio supply rails for higher headroom, while the ground-referenced single-supply capability simplifies biasing with a mid-rail virtual ground generated from a resistor divider buffered by one channel. Limit closed-loop gain so that the gain-bandwidth product maintains loop gain at 20 kHz (a gain of 100 consumes 2 MHz of bandwidth, which exceeds the device limit, so keep audio-stage gains below roughly 30). Cross-over distortion inherent to the class-AB output stage at light loads can be mitigated with a small pull-down load to ground.

What is the supply voltage range of the LM2904QP?
The LM2904QP operates at supply voltages up to 26 V, per the Texas Instruments product page which describes the LM2904 as a dual, 26-V, 700-kHz operational amplifier. It can run from a single supply or from dual supplies, and its supply-current drain is low and largely independent of supply voltage at approximately 0.7 mA typ per amplifier. Always verify absolute maximum ratings in the manufacturer datasheet before finalizing your design.
What is the bandwidth of the LM2904QP?
The LM2904QP has a 700 kHz gain-bandwidth product according to the Texas Instruments LM2904 product page. This makes it suitable for audio-range amplification, low-speed control loops, active filters, and general industrial signal conditioning, but not for high-speed or RF signal chains where 10 MHz+ bandwidth amplifiers are required.
Where can I buy LM2904QP and what is the price?
LM2904QP can be requested through the Request a Quote form on this page, which provides pricing, current stock, and lead-time information directly from XAIPART. The part is an active Texas Instruments automotive-grade device distributed through authorized channels. Because pricing varies by quantity and market conditions, request a quote for the exact quantity and delivery schedule you need rather than relying on static list prices.
What is the lead time for LM2904QP?
Lead time for the LM2904QP depends on current distributor inventory and Texas Instruments production schedules, and can range from same-day shipment for in-stock material to several weeks for factory orders. Request the current lead time through the Request a Quote form on this page, specifying your quantity. Note that the widely stocked LM2904QPWRQ1 TSSOP-8 reel variant is often available faster than the bare Q-suffix orderable part.
Is the LM2904QP automotive qualified?
Yes. The Q suffix on the LM2904QP denotes an automotive-grade variant that is AEC-Q100 qualified and specified over the -40C to +125C temperature range. Texas Instruments also offers the LM2904-Q1 family member, described on ti.com as an automotive-grade, dual, 26-V, 700-kHz operational amplifier. Standard commercial LM2904 variants (without Q or Q1 suffix) do not carry the automotive qualification.
What is the difference between LM2904QP and LM2904QPWRQ1?
The LM2904QPWRQ1 is the orderable TSSOP-8 tape-and-reel variant of the same automotive dual op amp, while the QP suffix designates the qualified automotive die version. Both are 8-pin TSSOP (PW) packages, AEC-Q100 grade, rated 26 V and 700 kHz, and are electrically interchangeable on the same footprint. The PWR code indicates tape-and-reel packing of the TSSOP-8 package; check the TI ordering table to confirm packing quantity differences.
What is the best drop-in replacement for LM2904QP?
The best drop-in replacement is the Texas Instruments LM2904QPWRQ1, which is the same automotive dual op amp in the same 8-pin TSSOP (PW) package with identical pinout and electrical specifications, differing mainly in packing format. The upgraded LM2904B family (LM2904B-Q1) offers improved specifications such as lower offset voltage while remaining pin-compatible in the same package, per the TI E2E forum noting LM2904B as an advance in the LM2904 family.
Can a STMicroelectronics or other-brand equivalent replace LM2904QP?
Cross-reference listings such as Hotenda's LM2904 cross reference show compatible equivalents from manufacturers including STMicroelectronics, Renesas/ADI, and NJR. Most industry-standard dual op amps share the same 8-pin pinout (OUT1, IN1-, IN1+, V-, IN2+, IN2-, OUT2, V+), so same-package versions can be drop-in replacements if supply range, temperature range, and automotive qualification match. Verify the specific equivalent's TSSOP-8 automotive variant and AEC-Q100 status in its datasheet before qualifying it.
Where can I download the LM2904QP datasheet PDF?
The LM2904QP datasheet PDF is available from the Texas Instruments product page at ti.com/product/LM2904, which provides the latest datasheet, application notes, and ordering information for the LM2904 family. Third-party archives such as alldatasheet.com also host the LM2904QP datasheet PDF (a 20-page document covering the dual operational amplifiers). Always use the TI website for the most current revision.
Where can I find the LM2904QP pinout?
The LM2904QP follows the industry-standard dual op amp 8-pin pinout: pin 1 is OUT1, pin 2 is IN1- (inverting), pin 3 is IN1+ (non-inverting), pin 4 is V- or GND, pin 5 is IN2+ (non-inverting), pin 6 is IN2- (inverting), pin 7 is OUT2, and pin 8 is V+. This pinout is identical to the LM358 family and is documented in the pin-configuration section of the TI LM2904 datasheet.
Is LM2904QP suitable for single-supply operation near ground?
Yes. According to the TI datasheet, the LM2904 family's common-mode input voltage range includes ground, allowing direct sensing of signals near 0 V in single-supply systems, and the low supply-current drain of 0.7 mA typ suits battery-powered designs. This ground-inclusive input range is a defining feature of the LM2904/LM358 architecture, eliminating the need for a negative supply in low-side sensing applications.
LM2904QP vs LM2904B - which should I choose?
Choose the LM2904B (or LM2904B-Q1) when you need better precision: the B version offers improved input offset voltage and offset drift while remaining pin-compatible with the LM2904QP in the same package, per the TI E2E forum noting LM2904B and LM2904BA as new advances in the LM2904 family. Choose the LM2904QP when legacy specification parity, proven automotive qualification, or cost is the priority, and the B-grade improvements are not required.
What are the key specifications of LM2904QP that engineers should know?
The LM2904QP is a dual general-purpose operational amplifier from Texas Instruments with a 26 V supply rating, 700 kHz gain-bandwidth, 0.7 mA typ supply current per amplifier, a common-mode input range including ground, and AEC-Q100 automotive qualification over -40C to +125C in an 8-pin TSSOP package. It operates from single or dual supplies with internally compensated, unity-gain-stable bipolar inputs, making it the classic choice for automotive and industrial single-supply analog signal conditioning.
What can replace LM2904QP in an existing design?
In an existing PCB with a TSSOP-8 footprint, the safest replacement is the LM2904QPWRQ1 (same die, same footprint, tape-and-reel). For a performance upgrade without layout changes, the LM2904B-Q1 TSSOP-8 variant is pin-compatible with improved offset specifications. Cross-brand options sharing the standard dual op amp pinout exist from STMicroelectronics, NJR, and others per cross-reference listings, but must be validated for automotive grade, supply range, and output drive before substitution.
When should I choose LM2904QP over alternatives like TS972 or precision op amps?
Choose the LM2904QP when you need a rugged, low-cost, 26 V-rated dual op amp for single-supply automotive or industrial circuits that sense near ground and do not demand high bandwidth, rail-to-rail output, or low offset. Choose parts like the ST TS972 when you need higher output current drive for audio loads, and precision or zero-drift amplifiers when offset and drift dominate your error budget. The LM2904QP's strength is cost-effective robustness, not precision or speed.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা LM2904QP — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the LM2904QP when you need a proven, low-cost, 26 V dual op amp with AEC-Q100 automotive qualification for single-supply circuits that sense signals near ground - classic automotive sensor conditioning, low-side current sensing, active filters, and industrial 4-20 mA receivers. Choose LM2904BQPWRQ1 when offset voltage and drift matter more (precision sensing, ADC front ends) since it is pin-compatible in the same TSSOP-8 footprint and simply upgrades precision. Choose LM2904QPWRQ1 for identical electricals in the standard tape-and-reel ordering format used in high-volume production. Choose STMicroelectronics LM2904YPT for cross-sourcing the industry-standard LM2904 function after verifying automotive qualification in the ST datasheet. For loads needing more output current (audio drivers, long cables), step up to the ST TS972 instead; the LM2904QP is not rail-to-rail, so avoid it where outputs must reach the supply rails.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য LM2904QPWRQ1 LM2904BQPWRQ1 LM2904BQPWR LM2904QPWR LM2904YPT
Package TSSOP-8 (PW) TSSOP-8 (PW) - same TSSOP-8 (PW) - same TSSOP-8 (PW) - same TSSOP-8 (PW) - same TSSOP-8 - same
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments STMicroelectronics
Channels 2 2 2 2 2 2
Pinout Standard dual op amp 8-pin (OUT1/IN1-/IN1+/V-/IN2+/IN2-/OUT2/V+) Identical Identical Identical Identical Identical (industry-standard LM2904 pinout)

মূল পার্থক্যসমূহ

  • Automotive AEC-Q100 qualification (বনামLM2904QPWR)
  • Improved precision at no layout cost (বনামLM2904BQPWRQ1)
  • Dual-channel integration with ground-inclusive inputs (বনামTS321IDR)

ডিজাইন নোট

Supply the LM2904QP from a rail within its 26 V rating and decouple with a 100 nF ceramic capacitor directly across pins 8 and 4, plus a 1 uF bulk capacitor per board region. In automotive 12 V systems, account for load-dump transients by adding a series resistor or TVS diode ahead of the supply pin. The supply current is approximately 0.7 mA typ per amplifier and largely independent of supply voltage, so battery-life budgets can be computed easily; however, verify current over temperature and supply extremes for sleep-mode designs.

Do not assume rail-to-rail operation: the LM2904QP output cannot swing fully to either rail, and the input stage loses precision when the common-mode voltage approaches V+. In single-supply low-side sensing this means the output rests slightly above ground - either bias the ADC range accordingly or add a small pull-down resistor on the output to sink the crossover current and improve low-level accuracy. Also remember that a gain of 30 already consumes about 21 MHz-worth of the 700 kHz gain-bandwidth budget at 20 kHz; keep closed-loop gains modest in audio circuits.

Keep input traces short and guard the inverting node of each high-gain stage to reduce leakage and parasitic capacitance, which degrade phase margin and offset accuracy. Route the ground pin (pin 4) as a low-impedance return, especially when the output drives loads that return through the same ground, since shared return impedance couples output current into the input reference. Place 100 nF decoupling within 2 mm of pin 8. Where the amplifier drives cables or capacitive loads above roughly 100 pF, add an isolation resistor (tens of ohms) in series with the output to prevent oscillation.

Estimated: at 0.7 mA typ per channel from a 26 V supply, worst-case device dissipation is roughly 26 V x 1.4 mA = about 36 mW, far below the TSSOP-8 thermal capability, so self-heating is negligible. The dominant thermal consideration is instead the ambient environment: the Q package is qualified to +125C, so verify adjacent hot components (regulators, drivers) do not create local hotspots above the qualified range on the PCB.

কমপ্লায়েন্স তথ্য

RoHS
Compliant
REACH
Unknown
AEC-Q100
Qualified
লিড ফ্রি
Yes
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

Q-suffix package denotes automotive grade per Texas Instruments family structure (LM2904-Q1 is listed by TI as automotive-grade). RoHS status listed as compliant on distributor listings; REACH and conflict-minerals status not stated in retrieved data.

ডেটা যাচাই করা হয়েছে: 2026-11-08 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

LM2904QP datasheet LM2904QP datasheet pdf LM2904QP pinout LM2904QP equivalent LM2904QP replacement LM2904QP cross reference LM2904QP vs LM2904B Texas Instruments LM2904QP LM2904QP TSSOP-8 pinout LM2904 dual op amp 26V 700kHz LM2904QP automotive AEC-Q100 LM2904 low-side current sensing op amp LM2904QP price stock what can replace LM2904QP

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments LM2904QP LM2904QPWRQ1 LM2904B LM2904-Q1 LM2904YPT LM358 TS321 TS972 operational amplifier dual op amp amplifier IC gain-bandwidth product common-mode input range AEC-Q100 RoHS TSSOP-8 QFN family surface mount automotive electronics low-side current sensing active filter single-supply operation supply current STMicroelectronics
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন