STMicroelectronics

LM2904WYPT - Dual 1.1MHz Op Amp, 100dB, 8-TSSOP | ST

MPN: LM2904WYPT ✓ সক্রিয়
Single supply Vdss 8-TSSOP Package Internal Speed
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

LM2904WYPT সারাংশ

The STMicroelectronics LM2904WYPT is a low-power dual operational amplifier with two independent, internally frequency-compensated amplifiers in an 8-pin TSSOP package. It provides approximately 1.1 MHz unity-gain bandwidth and 100 dB typical open-loop gain, making it suitable for general-purpose signal conditioning in automotive and industrial control systems. The device operates from a single power supply over a wide input-voltage range.

An operational amplifier is an analog amplifier that uses very high open-loop gain and negative feedback to amplify a differential input signal. Within the broader semiconductor hierarchy, the LM2904WYPT is an amplifier IC, a general-purpose operational amplifier, and a dual-amplifier device. Its two independent channels make it economical for designs that require two amplifier functions in one compact surface-mount package.

Internal frequency compensation means no external compensation network is required for ordinary closed-loop operation. This simplifies implementation in sensor interfaces, buffer stages, active filters, comparators, and control loops. The dual configuration also allows the two amplifiers to handle separate signals or to be cascaded when higher closed-loop gain is required.

The LM2904 family targets automotive and industrial control systems where a single-supply amplifier, low power consumption, and stable operation across supply-voltage variations are important. Its wide common-mode and output-voltage ranges support sensors and control circuitry powered from a single rail, while the two independent channels keep the component count and board area below that of two separate single-amplifier packages.

A key design consideration is the input-bias-current error produced by the differential input stage. In high-impedance sensor applications, resistor values must be selected so that bias-current-induced offset remains small compared with the sensed signal. Resistor thermal noise and the amplifier's own noise should also be checked together when working with low-amplitude analog signals.

This page combines manufacturer-family characteristics, package information, pricing evidence, and application-oriented design guidance. It also identifies which same-package alternatives can be considered without requiring PCB changes, helping engineers compare sourcing options before releasing a production design.

এর জন্য ড্রপ-ইন বিকল্প LM2904WYPT — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible LM2904WYPT (একই form factor এবং footprint) — পার্থক্য রয়েছে Amplifier Type, Number of Channels.

STMicroelectronics
Amplifier Type: Dual general-purpose operational amplifier
Number of Channels: 2 channels
এর সাথে তুলনা করুন LM2904WYPT →

LM2904AWYPT

✅ ড্রপ-ইন
STMicroelectronics
📦 8-TSSOP
Dual operational amplifier · 2 · Single-ended · ±15 V to 30 V · 8-TSSOP · AEC-Q100 · Internal

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LM2904YPT

✅ ড্রপ-ইন
STMicroelectronics
📦 8-TSSOP
Dual general-purpose operational amplifier · 2 channels · Single-ended output per channel · 1.1 MHz · 100 dB · Low power · 8-TSSOP · Surface mount

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LM2904WYPT সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Amplifier Type General-purpose operational amplifier
Number of Channels 2 independent channels
Number of Amplifiers 2
Unity-Gain Bandwidth 1.1 MHz
Typical Open-Loop Gain 100 dB
Frequency Compensation Internal
Power Supply Type Single supply
প্যাকেজ 8-TSSOP
মাউন্টিং টাইপ Surface mount
Automotive Application Designed for automotive and industrial control systems

LM2904WYPT পিন কনফিগারেশন

TSSOP-8 Package Pinout Diagram TSSOP-8 8-pin thin shrink small outline, P0.65mm, JEDEC MO-153. 1 8 2 7 3 6 4 5 TSSOP-8
পিন 1 OUT1 — Amplifier 1 output
পিন 2 -IN1 — Amplifier 1 inverting input
পিন 3 +IN1 — Amplifier 1 non-inverting input
পিন 4 V- — Negative supply or ground connection
পিন 5 +IN2 — Amplifier 2 non-inverting input
পিন 6 -IN2 — Amplifier 2 inverting input
পিন 7 OUT2 — Amplifier 2 output
পিন 8 V+ — Positive supply connection

সাধারণ ব্যবহার

LM2904WYPT এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Automotive Sensor Signal Conditioning, Industrial Control Loop Amplification, Active Filtering and Low-Frequency Conditioning, Battery-Powered Monitoring Circuit, Audio and Communication Interface Buffering, Threshold Detection and Comparator Operation.

🚗

Automotive Sensor Signal Conditioning

The LM2904WYPT fits automotive sensor-conditioning circuits because it provides two independent amplifiers, internal frequency compensation, and single-supply operation in an 8-TSSOP package. One channel can amplify a transducer signal while the other provides gain or buffering for a related feedback path. Its approximately 1.1 MHz unity-gain bandwidth is ample for many pressure, temperature, and position sensors operating below tens of kilohertz. The design must still be reviewed for the exact supply range, common-mode limits, input bias current, and automotive qualification required by the vehicle platform.

🏭

Industrial Control Loop Amplification

For industrial controllers, the LM2904WYPT can amplify error signals and buffer sensor references within a compact 8-TSSOP footprint. The two internally compensated channels support separate gain blocks without requiring two single-amplifier packages. Its 100 dB typical open-loop gain and 1.1 MHz unity-gain bandwidth are suitable for low-bandwidth proportional-control and analog-setpoint circuits. Design checks should include output swing, stability under the selected closed-loop gain, and tolerance to the industrial supply-voltage range.

🔧

Active Filtering and Low-Frequency Conditioning

The LM2904WYPT is suitable for active low-pass, high-pass, or notch stages when modest bandwidth and simple compensation are priorities. Its 1.1 MHz unity-gain bandwidth provides headroom for filters below the audio and industrial-control ranges, while the dual package allows two filter sections or a filter plus buffer on the same board. Validate the closed-loop gain at each corner frequency and include the amplifier and feedback-resistor noise when the filter operates close to the signal level.

⚡

Battery-Powered Monitoring Circuit

A single-supply LM2904WYPT can monitor a battery-derived rail, condition a divider output, and provide a second buffered control signal in one package. Single-supply operation simplifies portable and remote monitoring equipment compared with split-rail circuits, while the 8-TSSOP format supports compact assemblies. Confirm that the signal of interest remains inside the input common-mode range and that the required output level can be reached at light and heavy operating loads. Add input filtering to reject switching noise present in battery-powered systems.

🎧

Audio and Communication Interface Buffering

The LM2904WYPT can buffer low-level audio or communications signals where 1.1 MHz unity-gain bandwidth exceeds the intended operating frequency. One channel may serve as a unity-gain input buffer and the other as a gain or level-shift stage, reducing package count. Performance at low signal levels is influenced by offset, bias current, and noise, so the source impedance and feedback values should be selected carefully. A resistor or RC input network may also be needed to control high-frequency peaking around the amplifier.

📊

Threshold Detection and Comparator Operation

The LM2904WYPT can implement a threshold detector by applying positive feedback around an internally compensated amplifier, although open-loop behavior makes comparator design sensitive to noise and offset. The dual channels allow one stage to generate a threshold reference while the other detects the crossing. Check output saturation levels, input common-mode range, and propagation delay at the selected operating frequency. For safety-critical or fast-switching applications, a dedicated comparator may provide more predictable behavior than an open-loop operational amplifier.

What is the LM2904WYPT?
The LM2904WYPT is a low-power dual operational amplifier from STMicroelectronics with two independent, internally frequency-compensated amplifier channels in an 8-TSSOP package. According to the manufacturer datasheet, the LM2904 family is designed for automotive and industrial control systems, operates from a single supply, and provides approximately 1.1 MHz of unity-gain bandwidth with 100 dB of typical open-loop gain. It is a general-purpose amplifier suitable for sensor buffering, filtering, voltage comparison, and low-frequency control applications.
What are the key specifications of LM2904WYPT that engineers should know?
The principal LM2904WYPT characteristics are two amplifier channels, 1.1 MHz unity-gain bandwidth, 100 dB typical open-loop gain, internal frequency compensation, single-supply operation, and an 8-TSSOP surface-mount package. The LM2904 is specifically positioned for automotive and industrial control systems. Two independent amplifiers in one package reduce PCB area compared with two separate single op amps, while internal compensation removes the need for an external compensation network in standard closed-loop configurations.
Where can I download the LM2904WYPT datasheet PDF?
The official LM2904 family datasheet is available from STMicroelectronics through the manufacturer link on this page. The document covers the LM2904, LM2904A, LM2904W, and LM2904AW low-power dual operational amplifier families and includes application information for automotive and industrial control systems. Use the ordering-information section to confirm the package, temperature grade, and suffix associated with LM2904WYPT before placing a production order.
Where can I find the LM2904WYPT pinout?
The LM2904WYPT pinout is shown in the manufacturer datasheet and in the package diagram associated with this page. The device is an 8-TSSOP containing two independent amplifiers. Pin 8 is the positive supply connection, pin 4 is the negative supply or ground connection, and the remaining pins are allocated to the two non-inverting inputs, inverting inputs, and outputs. Always follow the pin-description table in the manufacturer datasheet when assigning PCB tracks.
Is the LM2904WYPT suitable for single-supply operation?
Yes, the LM2904WYPT is designed to operate from a single power supply over a wide range of voltages. This makes it appropriate for automotive and industrial control systems where generating a split supply would add cost and board complexity. When designing with a single rail, verify the required input common-mode range and output swing against the actual signal amplitude, because the usable output range is not identical to the supply rails.
Does the LM2904WYPT need an external compensation capacitor?
No, the LM2904 family uses internally frequency-compensated amplifiers, so ordinary closed-loop operation does not require an external compensation network. The manufacturer describes the circuit as containing two independent, high-gain operational amplifiers with internal frequency compensation. This simplifies designs involving voltage followers, non-inverting gain stages, transimpedance-style sensor interfaces, and comparators, while still requiring normal stability checks for unusual gain, capacitance, or feedback arrangements.
What can replace the LM2904WYPT as a drop-in part?
The closest identified same-package option is the STMicroelectronics LM2904AWYPT, which is listed in an 8-TSSOP package and belongs to the same LM2904 dual-op-amp family. The family-level suffix differences can change electrical grading or qualification, so confirm supply range, offset, bias current, temperature limits, and automotive requirements before substitution. Use the Request a Quote form on this page to request the exact LM2904WYPT and verify current availability and lead time.
Is LM2904WYPT the same as LM2904AWYPT?
No, they are related but not necessarily identical in device grading. Both are STMicroelectronics 8-TSSOP dual general-purpose operational amplifiers from the LM2904 family, which supports drop-in consideration at the package and pin-function level. The A designation identifies a different family variant with its own electrical characteristics, so confirm the complete datasheet parameters and qualification requirements rather than treating the two order codes as automatically interchangeable.
When should I choose the LM2904WYPT over another dual op amp?
Choose the LM2904WYPT when a design needs two independent, internally compensated general-purpose amplifiers in an 8-TSSOP package and is intended for single-supply automotive or industrial control circuitry. Its 1.1 MHz unity-gain bandwidth and 100 dB typical open-loop gain suit low-to-moderate-frequency signal conditioning rather than precision or high-speed instrumentation. For very low offset, high precision, or wide-bandwidth requirements, a more specialized amplifier family may be a better fit.
Is the LM2904WYPT suitable for sensor interface applications?
The LM2904WYPT can suit many sensor-interface applications because it provides two independent amplifiers, internal compensation, and operation from a single supply. Its practical suitability depends on the sensor output impedance and the required accuracy. High-impedance sources can amplify input-bias-current error and resistor noise, so compare the sensor impedance with the amplifier bias current and use the lowest practical feedback resistance while maintaining adequate bandwidth.
What is the best use of the two amplifiers in an LM2904WYPT?
The two LM2904WYPT amplifiers are independent and can serve different circuit blocks, such as amplifying a sensor output in one channel and driving a control signal in the other. They may also be cascaded for a higher closed-loop gain, provided stability and output-swing requirements are checked. Using the channels separately is usually preferable when signal isolation is needed, because each amplifier has its own input, output, and offset characteristics.
How should I handle bias-current error in a high-impedance LM2904WYPT design?
Limit the bias-current error by choosing feedback resistors that are not needlessly large, while checking that the resulting noise and bandwidth remain acceptable. The bias current produces an input-voltage error approximately equal to bias current multiplied by the effective source and feedback resistance. This consideration is especially important for pH, humidity, electrochemical, or high-output-impedance sensors where the sensed signal can be comparable to the offset created by the amplifier input stage.
Where can I buy LM2904WYPT online?
Use the Request a Quote form on this page to request LM2904WYPT from XAIPART, including the required quantity, target price, and delivery schedule. STMicroelectronics also offers the part through its online store, and authorized distribution channels list the 8-TSSOP device. Confirm the exact suffix, reel quantity, stock status, and lead time when placing an order because availability can change independently of the device lifecycle.
What is the price of the LM2904WYPT?
The current customer price for LM2904WYPT is generated through the Request a Quote form on this page rather than published as a static figure. A recent distributor listing showed a unit price of $0.1595, but it was a single-price listing without a qualifying quantity-break table and should not be treated as a contract price. Submit the required quantity and target price with the quote request for a current quotation.
What is the lead time for LM2904WYPT?
Lead time depends on current factory and distribution inventory, requested quantity, and the confirmed ordering suffix. The manufacturer lists LM2904WYPT for direct sale, and major distributors carry the part, but the current stock position can vary by order quantity. Use the Request a Quote form on this page and specify your required date and annual usage to obtain a current lead-time and availability response.
Is LM2904WYPT in stock?
LM2904WYPT is listed by STMicroelectronics and major distributors, and one distributor listing identifies the part as in stock, but stock levels change continuously and are not guaranteed by that status. Use the Request a Quote form on this page for the current inventory position, minimum order quantity, and scheduled delivery information for your required quantity. Specify whether you need production quantities, prototyping quantities, or scheduled releases.
LM2904WYPT versus LM2904YPT: which is the better drop-in choice?
Both order codes identify related STMicroelectronics LM2904 dual operational amplifiers, but the final suffix characters can indicate different package or qualification conditions. LM2904WYPT is confirmed in an 8-TSSOP package. Before choosing LM2904YPT as a substitute, verify its package drawing, temperature range, electrical limits, and automotive qualification from the manufacturer datasheet. For a new automotive or industrial design, the correctly qualified suffix should be chosen before layout approval.
What is the best STMicroelectronics equivalent for LM2904WYPT?
The best identified STMicroelectronics equivalent is the LM2904AWYPT because it is listed in the same 8-TSSOP package and belongs to the same dual general-purpose operational-amplifier family. It is a candidate for drop-in evaluation rather than a blanket substitution. Compare the complete electrical ratings and qualification conditions in the manufacturer datasheets, especially if the circuit depends on input bias current, offset voltage, supply range, noise, or automotive qualification.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা LM2904WYPT — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the LM2904WYPT when the PCB needs two independent, general-purpose amplifiers in an 8-TSSOP package and the application is an automotive or industrial single-supply control circuit. Its approximately 1.1 MHz bandwidth is suitable for low-frequency signal conditioning, buffering, filtering, and basic threshold functions, but it is not the preferred choice for precision instrumentation, very low offset measurement, or high-speed signal paths. The LM2904AWYPT is a close same-package family candidate when its specific electrical grading and qualification fit the design. LM2904YPT may also suit an existing layout, but its suffix conditions must be checked against the exact automotive, temperature, and electrical requirements. If either same-package option lacks sufficient margin, do not force a drop-in substitution; choose a precision, rail-to-rail, or higher-bandwidth amplifier family and update the schematic and layout.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য LM2904AWYPT LM2904YPT
Brand STMicroelectronics STMicroelectronics STMicroelectronics
Package 8-TSSOP 8-TSSOP 8-TSSOP
Number of Channels 2 independent amplifiers 2 independent amplifiers 2 independent amplifiers
Frequency Compensation Internal Internal Internal
Power Supply Type Single supply Single supply Single supply
Application Positioning Automotive and industrial control systems Automotive and industrial control systems Automotive and industrial control systems
Mounting Type Surface mount Surface mount Surface mount

মূল পার্থক্যসমূহ

  • Two independent general-purpose amplifiers in one compact package (বনামLM324KAPWR)
  • Automotive and industrial system positioning (বনামLM324KAPWR)
  • Internal frequency compensation simplifies implementation (বনামLM2904AWYPT)

ডিজাইন নোট

Verify the input common-mode range before selecting the gain and feedback network. A single-supply amplifier does not necessarily accept an input at the negative rail, and some feedback arrangements can raise the effective input voltage above the signal level. Review the manufacturer pin descriptions and operating limits, then exercise the circuit across minimum, nominal, and maximum supply conditions with the intended source impedance.

Choose feedback resistors to balance bias-current error, thermal noise, and bandwidth. Larger resistors reduce input-current contribution but increase noise and may create a visible input-voltage offset across high source impedances. Keep the two amplifier channels away from switching nodes and use a short ground return from pin 4. If the source has significant capacitance, add a small isolation resistor at the input to limit peaking.

Place bypass capacitance close to the supply pins and route the power and ground connections with low impedance. The 8-TSSOP footprint requires careful fanout between the two amplifier channels to avoid crossing feedback and input traces. Respect the package pin-1 orientation shown in the package diagram, and verify the land pattern against the manufacturer mechanical drawing before releasing artwork.

The LM2904 family is described as a low-power dual operational amplifier, but total supply consumption still depends on the selected variant and operating conditions. Because both channels can operate independently, one channel may remain active while the other is lightly loaded. Check the quiescent-current and supply-current limits in the manufacturer datasheet under the actual temperature and supply voltage, particularly for battery-operated designs.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The family is positioned for automotive and industrial control systems, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not identified in the available product information. Confirm the applicable declarations on the manufacturer product and quality-document pages for the exact ordering suffix.

ডেটা যাচাই করা হয়েছে: 2026-11-17 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

LM2904WYPT datasheet LM2904WYPT pinout LM2904WYPT datasheet pdf LM2904WYPT 8-TSSOP STMicroelectronics LM2904WYPT LM2904WYPT equivalent LM2904WYPT replacement LM2904WYPT drop-in substitute LM2904WYPT vs LM2904AWYPT LM2904WYPT price LM2904WYPT stock LM2904WYPT automotive sensor amplifier LM2904WYPT single supply circuit LM2904WYPT dual amplifier configuration where to buy LM2904WYPT

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

STMicroelectronics LM2904WYPT LM2904AWYPT LM2904YPT LM2904 LM324KAPWR LM2902KPWR operational amplifier op amp dual amplifier general-purpose amplifier amplifier IC analog signal conditioning unity-gain bandwidth open-loop gain frequency compensation single-supply operation 8-TSSOP TSSOP package family surface mount SMD package automotive control systems industrial control systems sensor interface active filter input bias current input offset voltage
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন