LM2904WYPT - Dual 1.1MHz Op Amp, 100dB, 8-TSSOP | ST
MPN: LM2904WYPT ✓ सक्रियLM2904WYPT अवलोकन
An operational amplifier is an analog amplifier that uses very high open-loop gain and negative feedback to amplify a differential input signal. Within the broader semiconductor hierarchy, the LM2904WYPT is an amplifier IC, a general-purpose operational amplifier, and a dual-amplifier device. Its two independent channels make it economical for designs that require two amplifier functions in one compact surface-mount package.
Internal frequency compensation means no external compensation network is required for ordinary closed-loop operation. This simplifies implementation in sensor interfaces, buffer stages, active filters, comparators, and control loops. The dual configuration also allows the two amplifiers to handle separate signals or to be cascaded when higher closed-loop gain is required.
The LM2904 family targets automotive and industrial control systems where a single-supply amplifier, low power consumption, and stable operation across supply-voltage variations are important. Its wide common-mode and output-voltage ranges support sensors and control circuitry powered from a single rail, while the two independent channels keep the component count and board area below that of two separate single-amplifier packages.
A key design consideration is the input-bias-current error produced by the differential input stage. In high-impedance sensor applications, resistor values must be selected so that bias-current-induced offset remains small compared with the sensed signal. Resistor thermal noise and the amplifier's own noise should also be checked together when working with low-amplitude analog signals.
This page combines manufacturer-family characteristics, package information, pricing evidence, and application-oriented design guidance. It also identifies which same-package alternatives can be considered without requiring PCB changes, helping engineers compare sourcing options before releasing a production design.
के लिए ड्रॉप-इन विकल्प LM2904WYPT — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं LM2904WYPT (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Amplifier Type, Number of Channels.
LM2904AWYPT
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →LM2904YPT
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →LM2904WYPT Maximum Ratings और Electrical Characteristics
| Amplifier Type | General-purpose operational amplifier |
| Number of Channels | 2 independent channels |
| Number of Amplifiers | 2 |
| Unity-Gain Bandwidth | 1.1 MHz |
| Typical Open-Loop Gain | 100 dB |
| Frequency Compensation | Internal |
| Power Supply Type | Single supply |
| पैकेज | 8-TSSOP |
| माउंटिंग प्रकार | Surface mount |
| Automotive Application | Designed for automotive and industrial control systems |
LM2904WYPT पिन कॉन्फ़िगरेशन
| पिन 1 | OUT1 — Amplifier 1 output |
| पिन 2 | -IN1 — Amplifier 1 inverting input |
| पिन 3 | +IN1 — Amplifier 1 non-inverting input |
| पिन 4 | V- — Negative supply or ground connection |
| पिन 5 | +IN2 — Amplifier 2 non-inverting input |
| पिन 6 | -IN2 — Amplifier 2 inverting input |
| पिन 7 | OUT2 — Amplifier 2 output |
| पिन 8 | V+ — Positive supply connection |
सामान्य अनुप्रयोग
LM2904WYPT के लिए उपयुक्त है 6 अनुप्रयोगs: Automotive Sensor Signal Conditioning, Industrial Control Loop Amplification, Active Filtering and Low-Frequency Conditioning, Battery-Powered Monitoring Circuit, Audio and Communication Interface Buffering, Threshold Detection and Comparator Operation.
Automotive Sensor Signal Conditioning
The LM2904WYPT fits automotive sensor-conditioning circuits because it provides two independent amplifiers, internal frequency compensation, and single-supply operation in an 8-TSSOP package. One channel can amplify a transducer signal while the other provides gain or buffering for a related feedback path. Its approximately 1.1 MHz unity-gain bandwidth is ample for many pressure, temperature, and position sensors operating below tens of kilohertz. The design must still be reviewed for the exact supply range, common-mode limits, input bias current, and automotive qualification required by the vehicle platform.
अनुशंसित
Industrial Control Loop Amplification
For industrial controllers, the LM2904WYPT can amplify error signals and buffer sensor references within a compact 8-TSSOP footprint. The two internally compensated channels support separate gain blocks without requiring two single-amplifier packages. Its 100 dB typical open-loop gain and 1.1 MHz unity-gain bandwidth are suitable for low-bandwidth proportional-control and analog-setpoint circuits. Design checks should include output swing, stability under the selected closed-loop gain, and tolerance to the industrial supply-voltage range.
अनुशंसित
Active Filtering and Low-Frequency Conditioning
The LM2904WYPT is suitable for active low-pass, high-pass, or notch stages when modest bandwidth and simple compensation are priorities. Its 1.1 MHz unity-gain bandwidth provides headroom for filters below the audio and industrial-control ranges, while the dual package allows two filter sections or a filter plus buffer on the same board. Validate the closed-loop gain at each corner frequency and include the amplifier and feedback-resistor noise when the filter operates close to the signal level.
अनुशंसित
Battery-Powered Monitoring Circuit
A single-supply LM2904WYPT can monitor a battery-derived rail, condition a divider output, and provide a second buffered control signal in one package. Single-supply operation simplifies portable and remote monitoring equipment compared with split-rail circuits, while the 8-TSSOP format supports compact assemblies. Confirm that the signal of interest remains inside the input common-mode range and that the required output level can be reached at light and heavy operating loads. Add input filtering to reject switching noise present in battery-powered systems.
अनुशंसित
Audio and Communication Interface Buffering
The LM2904WYPT can buffer low-level audio or communications signals where 1.1 MHz unity-gain bandwidth exceeds the intended operating frequency. One channel may serve as a unity-gain input buffer and the other as a gain or level-shift stage, reducing package count. Performance at low signal levels is influenced by offset, bias current, and noise, so the source impedance and feedback values should be selected carefully. A resistor or RC input network may also be needed to control high-frequency peaking around the amplifier.
अनुशंसित
Threshold Detection and Comparator Operation
The LM2904WYPT can implement a threshold detector by applying positive feedback around an internally compensated amplifier, although open-loop behavior makes comparator design sensitive to noise and offset. The dual channels allow one stage to generate a threshold reference while the other detects the crossing. Check output saturation levels, input common-mode range, and propagation delay at the selected operating frequency. For safety-critical or fast-switching applications, a dedicated comparator may provide more predictable behavior than an open-loop operational amplifier.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा LM2904WYPT — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | LM2904AWYPT | LM2904YPT |
|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 8-TSSOP | 8-TSSOP | 8-TSSOP |
| Number of Channels | 2 independent amplifiers | 2 independent amplifiers | 2 independent amplifiers |
| Frequency Compensation | Internal | Internal | Internal |
| Power Supply Type | Single supply | Single supply | Single supply |
| Application Positioning | Automotive and industrial control systems | Automotive and industrial control systems | Automotive and industrial control systems |
| Mounting Type | Surface mount | Surface mount | Surface mount |
मुख्य विशेषताएँ
- Two independent general-purpose amplifiers in one compact package (बनामLM324KAPWR)
- Automotive and industrial system positioning (बनामLM324KAPWR)
- Internal frequency compensation simplifies implementation (बनामLM2904AWYPT)
डिज़ाइन नोट्स
Verify the input common-mode range before selecting the gain and feedback network. A single-supply amplifier does not necessarily accept an input at the negative rail, and some feedback arrangements can raise the effective input voltage above the signal level. Review the manufacturer pin descriptions and operating limits, then exercise the circuit across minimum, nominal, and maximum supply conditions with the intended source impedance.
Choose feedback resistors to balance bias-current error, thermal noise, and bandwidth. Larger resistors reduce input-current contribution but increase noise and may create a visible input-voltage offset across high source impedances. Keep the two amplifier channels away from switching nodes and use a short ground return from pin 4. If the source has significant capacitance, add a small isolation resistor at the input to limit peaking.
Place bypass capacitance close to the supply pins and route the power and ground connections with low impedance. The 8-TSSOP footprint requires careful fanout between the two amplifier channels to avoid crossing feedback and input traces. Respect the package pin-1 orientation shown in the package diagram, and verify the land pattern against the manufacturer mechanical drawing before releasing artwork.
The LM2904 family is described as a low-power dual operational amplifier, but total supply consumption still depends on the selected variant and operating conditions. Because both channels can operate independently, one channel may remain active while the other is lightly loaded. Check the quiescent-current and supply-current limits in the manufacturer datasheet under the actual temperature and supply voltage, particularly for battery-operated designs.
अनुपालन जानकारी
The family is positioned for automotive and industrial control systems, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not identified in the available product information. Confirm the applicable declarations on the manufacturer product and quality-document pages for the exact ordering suffix.