onsemi

LM293DMR2 - Dual Precision Comparator, 36 V | onsemi

MPN: LM293DMR2 ✓ সক্রিয়
2 V to 36 V Vdss TSSOP-8 Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

LM293DMR2 সারাংশ

The onsemi LM293DMR2 is a dual low-offset voltage comparator with two independent comparison channels, a 2 V to 36 V supply range, open-collector outputs, and an 8-pin TSSOP package. Each channel can operate from single or split power supplies, allowing common-mode input signals to approach ground during single-supply operation. The low input offset voltage, specified as low as 2.0 mV, supports accurate threshold detection in industrial, automotive, and consumer circuits.

A voltage comparator is an analog signal-conditioning IC that compares two input voltages and produces a digital logic state at its output. The LM293 belongs to the comparator hierarchy, which includes differential comparators, window comparators, and precision comparators. By converting an analog threshold relationship into an open-collector logic indication, this type of device bridges analog measurement circuits and digital control, monitoring, or protection systems.

The principal features include two independent comparators, low offset voltage, a common-mode input range extending to ground under single-supply operation, and open-collector outputs that can sink current from multiple compatible devices. The 2 V to 36 V operating supply range accommodates 5 V, 12 V, and 24 V systems. The onsemi datasheet also identifies the device as suitable for consumer, automotive, and industrial applications where reliable voltage-level detection is required.

Each comparator channel is independent, allowing one device to perform two unrelated threshold measurements. The open-collector architecture requires an external pull-up resistor and provides a wired-output capability when several comparator outputs share a bus. This architecture does not actively drive the output high, but it offers flexible voltage-level adaptation and enables wired-AND behavior when output collectors are connected.

Typical uses include monitoring a 12 V or 24 V automotive battery, detecting overvoltage and undervoltage conditions in industrial power systems, comparing sensor outputs with adjustable thresholds, and providing simple supervisory functions in consumer equipment. The grounded common-mode capability is especially useful in single-supply systems where the signal of interest begins near 0 V and cannot be compared reliably by a comparator with a restricted input range.

For robust PCB implementation, place input resistors close to the comparator pins to limit differential pickup and route the inputs away from switching nodes and high-current paths. Select the external output pull-up for the intended logic voltage, and confirm that its maximum sink current remains within the device output ratings. Check that the common-mode and differential input voltages remain within the absolute maximum limits during power transients.

This product page combines the manufacturer specifications, package and pin information, drop-in replacement analysis, comparison data, and practical PCB guidance to accelerate design review and sourcing. The technical recommendations focus on preserving the LM293DMR2 role as a reliable, low-offset dual comparator while making package, electrical, and supply constraints explicit before layout release.

এর জন্য ড্রপ-ইন বিকল্প LM293DMR2 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible LM293DMR2 (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Comparator Type, Input Offset Voltage, Output Type.

onsemi
Package: 8-MSOP
Comparator Type: Dual, independent precision voltage comparator
Input Offset Voltage: As low as 2.0 mV
এর সাথে তুলনা করুন LM293DMR2 →

LM293DMR2G

✅ ড্রপ-ইন
📦 TSSOP-8
Same 2 V to 36 V supply, 2.0 mV offset class, dual open-collector outputs, and TSSOP-8 pin arrangement; orderable suffix differs by 0% on listed core ratings.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

LM393DMR2G

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
onsemi
📦 TSSOP-8
Dual, independent precision voltage comparator · 2 channels · 2 V to 36 V · As low as 2.0 mV · Rail-to-rail · Open collector · Single or split supply · 8-MSOP

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LM2903DMR2

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
onsemi
📦 TSSOP-8
Dual independent precision voltage comparator · 2 channels · 2 V to 36 V · 36 V · Supported · Includes ground during single-supply operation

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LM293DMR2 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Comparator Type Dual independent precision voltage comparator
Number of Channels 2 channels
Supply Voltage Range 2 V to 36 V
Split Supply Rating ±18 V
Input Offset Voltage 2.0 mV maximum
আউটপুট টাইপ Open-collector
Common-Mode Operation Rail-to-rail input with single-supply operation
Operating Supply Mode Single or split supply
অপারেটিং তাপমাত্রার পরিসর -25°C to +85°C
প্যাকেজ TSSOP-8
মাউন্টিং টাইপ Surface mount
Manufacturer Description Dual low-offset voltage comparator
Automotive Application Suitability Automotive applications
Industrial Application Suitability Industrial applications
Consumer Application Suitability Consumer applications
Output Pull-Up Requirement External pull-up resistor required

LM293DMR2 পিন কনফিগারেশন

TSSOP-8 Package Pinout Diagram TSSOP-8 8-pin thin shrink small outline, P0.65mm, JEDEC MO-153. 1 8 2 7 3 6 4 5 TSSOP-8
পিন 1 OUT 1 — Comparator 1 open-collector output
পিন 2 IN 1- — Comparator 1 inverting input
পিন 3 IN 1+ — Comparator 1 noninverting input
পিন 4 GND — Ground connection
পিন 5 IN 2+ — Comparator 2 noninverting input
পিন 6 IN 2- — Comparator 2 inverting input
পিন 7 OUT 2 — Comparator 2 open-collector output
পিন 8 VCC — Positive supply connection

সাধারণ ব্যবহার

LM293DMR2 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Automotive Battery Monitoring, Industrial Overvoltage Protection, Battery Charger Status Detection, Sensor Interface Thresholding, Consumer Power Sequencing, Security and Surveillance Interface.

🚗

Automotive Battery Monitoring

The LM293DMR2 fits automotive battery-threshold monitoring because its 2 V to 36 V supply range accommodates nominal 12 V and 24 V systems, while the 2.0 mV input offset supports tighter switching thresholds than a general-purpose comparator. Place one channel near an overvoltage threshold and the other near an undervoltage threshold, with the noninverting and inverting inputs set by a resistor network. Each open-collector output can drive a pull-up and an indicator or controller input. The design must add transient suppression and verify that fault voltages cannot exceed the device input limits.

🏭

Industrial Overvoltage Protection

The LM293DMR2 can supervise a 12 V or 24 V industrial power rail by comparing its divided voltage with a precision reference. Its 2.0 mV maximum input offset improves threshold repeatability, and the 2 V to 36 V operating supply covers common industrial rails. One comparator channel can detect an overvoltage condition, while the second can provide undervoltage or window supervision. Use the open-collector output to pull down an enable line or illuminate a fault signal through an external pull-up. Account for relay transients, surge paths, and the limited input range during fault analysis.

🔋

Battery Charger Status Detection

The LM293DMR2 is useful for comparing divided battery voltages against charge thresholds in portable and industrial charging systems. The 2 V minimum operating supply allows operation from a reduced auxiliary rail, and the 2.0 mV offset helps preserve accuracy after resistive voltage division. Two independent channels can identify separate charge or discharge thresholds, producing open-collector logic for a charger state machine. Select resistor values to keep the input common-mode voltage within the permitted range and choose a pull-up voltage compatible with the downstream logic. Add filtering when the monitored source contains ripple.

🧩

Sensor Interface Thresholding

The LM293DMR2 converts an analog sensor signal into a logic indication when the signal crosses a defined threshold. Its low 2.0 mV offset is valuable when the input is derived from a resistive divider, and single-supply operation permits comparison with signals near ground. Use the two channels for two sensor thresholds or configure one as a hysteretic comparator with positive feedback. The open-collector output supports a flexible pull-up voltage and can trigger a microcontroller input or gate. Keep sensor traces away from switching power nodes and add filtering when the measured quantity changes slowly or contains noise.

📱

Consumer Power Sequencing

The LM293DMR2 can supervise a power rail and provide a permissive or fault signal during consumer-system startup. Its 2 V to 36 V supply range supports both low-voltage logic rails and larger 12 V systems, while the two channels can monitor independent sequence thresholds. Open-collector outputs make it straightforward to combine a fault indication with a pull-up network and downstream enable logic. Confirm the input common-mode range during ramp-up and add hysteresis to prevent repeated enable toggling near the threshold. The TSSOP-8 footprint also supports compact consumer boards where two separate comparator packages would be impractical.

🎥

Security and Surveillance Interface

The LM293DMR2 fits security and surveillance interfaces that require reliable detection of a contact, resistive sensor, or divided supply condition. Two channels can monitor independent alarm points, and the open-collector output can pull down a wired alarm line through a suitable pull-up. The 2.0 mV offset class helps preserve repeatability around carefully chosen thresholds, while the 2 V to 36 V supply accommodates both logic and higher-voltage monitoring circuits. Provide input filtering for long cable runs, protect exposed nodes from transients, and observe absolute-maximum differential input limits to avoid damage during contact closure.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

LM293DMR2G Same-family TSSOP-8 alternative ব্যবহৃত হয়: Automotive Battery Monitoring, Industrial Overvoltage Protection, Battery Charger Status Detection, Consumer Power Sequencing, Security and Surveillance Interface LM2903DMR2 onsemi ব্যবহৃত হয়: Automotive Battery Monitoring, Battery Charger Status Detection, Sensor Interface Thresholding, Security and Surveillance Interface LM393DMR2 Dual-comparator functional alternative ব্যবহৃত হয়: Industrial Overvoltage Protection, Sensor Interface Thresholding, Consumer Power Sequencing
What is the onsemi LM293DMR2?
The onsemi LM293DMR2 is a dual, independent, low-offset voltage comparator designed for single- or split-supply operation. According to the onsemi LM293 datasheet, it accepts a 2 V to 36 V supply, provides an open-collector output, and supports an input common-mode range extending to ground with a single supply. The device is packaged in an 8-pin TSSOP and is intended for precise voltage-level detection in automotive, industrial, and consumer electronics.
What is the supply voltage range of LM293DMR2?
The LM293DMR2 operates from 2 V to 36 V across its rated supply range. According to the onsemi LM293 datasheet, the device can also be powered from split supplies with a rating of ±18 V. This makes it suitable for low-voltage logic systems as well as nominal 12 V and 24 V equipment. Input and output operating limits remain separate from the supply rating, so both common-mode and differential input voltages must be checked during fault-condition analysis.
How many comparators are in LM293DMR2?
The LM293DMR2 contains two independent voltage comparators in one 8-pin TSSOP package. According to the onsemi LM293 datasheet, each channel has its own non-inverting input, inverting input, and output, while sharing supply and ground connections. The two channels can perform separate threshold functions and do not require synchronized decision points. Their outputs are open-collector, so external pull-up resistors are required even when the channels drive separate logic signals.
Where can I download the LM293DMR2 datasheet PDF?
The LM293DMR2 datasheet is available from onsemi through the manufacturer LM293 product page and through the linked manufacturer data documents. According to the onsemi datasheet, the LM293 family is a dual comparator for single- or split-supply operation, with input offset voltage specified as low as 2.0 mV. Use the document's pin-description table and electrical-characteristics tables when assigning the eight pins and validating worst-case input, output, and supply conditions.
Where can I find the LM293DMR2 pinout?
The LM293DMR2 pinout is shown in the onsemi LM293 datasheet, which should be consulted for the definitive connection diagram and package orientation. The standard eight-pin arrangement places channel 1 output on pin 1, channel 1 inputs on pins 2 and 3, ground on pin 4, channel 2 inputs on pins 5 and 6, channel 2 output on pin 7, and supply on pin 8. Verify the exposed package orientation and pin numbering on the physical symbol before PCB release.
What is the output type of LM293DMR2?
The LM293DMR2 uses open-collector outputs on both comparator channels. According to the onsemi LM293 datasheet, each output can sink current but requires an external pull-up resistor to establish a high logic level. This arrangement permits the output voltage to be referenced to a selected logic supply and allows multiple open-collector outputs to be wired together. The pull-up resistance must balance rising time, supply current, fan-out, and the output's sink-current capability.
What can replace the LM293DMR2?
The LM293DMR2G is the closest documented same-brand replacement because it uses the same dual open-collector comparator architecture and TSSOP-8 package while changing the orderable suffix. According to the onsemi LM293 documentation, input offset voltage is specified as low as 2.0 mV and the family operates from 2 V to 36 V. Before substitution, confirm the exact suffix temperature rating, lead finish, supplier qualification status, and lot-specific requirements rather than treating the alternate suffix as automatically identical.
Is the LM293DMR2G the same as LM293DMR2?
The LM293DMR2G is electrically and mechanically related to the LM293DMR2 and is documented as a TSSOP-8 dual comparator with matching terminal assignments and core performance. According to the onsemi LM293 datasheet, the family supports a 2 V to 36 V supply and low offset voltage. The G suffix indicates a different orderable version, so procurement should confirm temperature grade, environmental qualification, marking, and availability before approving it as a drop-in production replacement.
LM293DMR2 vs LM393DMR2 - which is better for low-offset detection?
The LM293DMR2 is generally preferable when minimizing input offset voltage is the primary requirement. According to the onsemi LM293 datasheet, LM293-family input offset voltage is specified as low as 2.0 mV, while the LM393 family has a different offset-voltage specification. Both use the familiar dual-comparator arrangement and open-collector outputs, but the final choice should also verify input bias current, common-mode limits, propagation delay, operating temperature, and the exact package suffix.
When should I choose LM293DMR2 over LM2903DMR2?
Choose the LM293DMR2 when the design requires the lower-offset LM293-family comparison characteristics and an operating temperature range of -25°C to +85°C. According to the onsemi LM293 datasheet, the LM293 provides low offset voltage, open-collector outputs, and operation from 2 V to 36 V. An LM2903-family device may be preferable when its broader automotive temperature capability is specifically required, but its offset, bias, output, and qualification characteristics should be compared before substitution.
Is LM293DMR2 suitable for 12 V and 24 V automotive systems?
The LM293DMR2 is suitable for nominal 12 V and 24 V detection applications because its rated supply range extends to 36 V and the family is identified for automotive use. According to the onsemi LM293 datasheet, the device supports split supplies up to ±18 V and common-mode input operation to ground with a single supply. The designer must still evaluate transient protection, input protection, output pull-up selection, and whether the specific ordering code satisfies the vehicle's qualification requirements.
Where to buy LM293DMR2 online?
Use the Request a Quote form on this page to ask for LM293DMR2 availability, current lead time, and order quantities. The onsemi LM293 documentation identifies the device as a dual comparator for automotive, industrial, and consumer applications, while distributor listings confirm the exact LM293DMR2 orderable code. A sourcing request should state the required quantity, reel or other packing format, date-code preference, and any qualification requirements so the quote can be matched to the intended production use.
What is the price of LM293DMR2?
Current LM293DMR2 pricing is handled through the Request a Quote form on this page rather than through a static price table. The onsemi datasheet identifies the device as a 2 V to 36 V dual comparator, and distributor inventory can change independently of technical availability. For a quote, specify the quantity, packaging format, and target date so the commercial response reflects the exact LM293DMR2 orderable configuration rather than a generic LM293 family price.
What is the lead time for LM293DMR2?
Submit an LM293DMR2 request through the Request a Quote form on this page to obtain a current lead-time commitment. Lead time depends on factory inventory, packaging format, order quantity, and required date codes, none of which should be inferred from general comparator availability. The onsemi LM293 datasheet confirms the electrical family and orderable-device context, while the quotation process should provide the current commercial schedule for the exact suffix and quantity being evaluated.
What are the key specifications of LM293DMR2 that engineers should know?
The key LM293DMR2 specifications are a 2 V to 36 V supply range, two independent comparator channels, 2.0 mV maximum input offset voltage, open-collector outputs, operation from single or split supplies, and a TSSOP-8 package. According to the onsemi LM293 datasheet, the input common-mode range can extend to ground in single-supply operation. These characteristics make the device appropriate for battery monitoring, threshold detection, industrial supervision, and consumer voltage-level checks.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা LM293DMR2 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose LM293DMR2 when a compact dual comparator is needed for 2 V to 36 V operation, low input offset, grounded common-mode signals, and open-collector interface logic. LM293DMR2G is the closest documented same-family alternative and retains the same TSSOP-8 footprint and core LM293 ratings, making it the first candidate to review for a production substitution. Select LM393DMR2 when its approximately 5 mV offset limit is acceptable and cost or broader generic comparator sourcing is more important than the LM293 family's lower offset. Select LM2903DMR2 when the wider -40°C to +125°C operating range is required by an automotive or industrial environment. For any candidate, verify the exact pin description, common-mode limits, differential input maximum, output sink current, propagation delay, and qualification requirements before releasing a PCB substitution.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য LM293DMR2G LM393DMR2 LM2903DMR2
Package TSSOP-8 TSSOP-8 TSSOP-8 TSSOP-8
Brand onsemi onsemi onsemi onsemi
Comparator Channels 2 2 2 2
Supply Voltage Range 2 V to 36 V 2 V to 36 V 2 V to 36 V 2 V to 36 V
Split Supply Rating ±18 V ±18 V ±18 V ±18 V
Maximum Input Offset Voltage 2.0 mV 2.0 mV Approximately 5 mV 2.0 mV
Output Type Open-collector Open-collector Open-collector Open-collector
Supply Mode Single or split supply Single or split supply Single or split supply Single or split supply

মূল পার্থক্যসমূহ

  • Lower maximum input offset in the directly comparable LM393 option (বনামLM393DMR2)
  • Same-family suffix alternative preserves the core electrical ratings (বনামLM293DMR2G)
  • Broader temperature coverage in the automotive comparison (বনামLM2903DMR2)

ডিজাইন নোট

Do not treat the open-collector output as a push-pull logic output. Fit an external pull-up resistor to every output that must reach a valid high state, and confirm that the resistor, logic supply, and output sink current form a valid combination. When multiple outputs are wired together, calculate the maximum total sink current under the worst-case state. Also verify the absolute maximum differential input voltage during startup and fault conditions, because input protection is not intended to handle unrestricted overloads.

Place input-setting and feedback resistors close to pins 2, 3, 5, and 6 to minimize parasitic capacitance and susceptibility to coupled noise. Route both comparison inputs as a compact differential pair where practical, and keep them away from inductors, switching-node copper, and high-current return paths. Because threshold accuracy can be affected by input offset and noise, avoid sharing long exposed input runs with unrelated analog signals. The GND connection should use a short return to the circuit reference plane.

Decouple the supply pin close to the device with a local ceramic capacitor and provide adequate bulk capacitance for the connected circuit. The supported 2 V to 36 V range does not remove the need for supply filtering because comparator propagation behavior and input thresholds can be influenced by supply ripple. For automotive or industrial rails, include transient and reverse-polarity protection ahead of the IC. Confirm that protection-network leakage does not move a high-impedance sensing node outside the comparator's common-mode range.

Use hysteresis when the compared signal crosses the threshold slowly or contains noise, otherwise the open-collector output can chatter and repeatedly trigger downstream circuitry. Positive feedback from output to the appropriate input creates hysteresis, but the added path must be sized against the resistor network that establishes the threshold. For slowly varying battery or temperature signals, add filtering at the input while preserving comparator response time. Validate the final threshold, noise margin, and propagation delay with worst-case component tolerances.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The manufacturer documents identify automotive suitability but do not explicitly establish the orderable LM293DMR2 as AEC-Q100 qualified. Compliance attributes for this exact suffix require confirmation from onsemi.

ডেটা যাচাই করা হয়েছে: 2026-11-15 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

LM293DMR2 datasheet LM293DMR2 pinout LM293DMR2 datasheet pdf LM293DMR2 equivalent LM293DMR2 replacement LM293DMR2 drop-in replacement LM293DMR2 vs LM393DMR2 onsemi LM293DMR2 LM293DMR2 TSSOP-8 footprint LM293DMR2 open collector output LM293DMR2 2 V to 36 V LM293DMR2 automotive battery monitor LM293DMR2 price LM293DMR2 stock

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

onsemi LM293DMR2 LM293DMR2G LM393DMR2 LM2903DMR2 voltage comparator dual comparator precision comparator analog comparator signal-conditioning IC open-collector output open-drain output common-mode voltage input offset voltage single-supply operation split-supply operation TSSOP-8 TSSOP family surface-mount package automotive battery monitoring industrial voltage supervision threshold detection external pull-up resistor
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন