Texas Instruments

LM324ADBR - 30V 1.2MHz Quad Op Amp | Texas Instruments

MPN: LM324ADBR ✓ সক্রিয়
30 V Vdss 20 nA Id 14-pin SSOP (DB) Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

LM324ADBR সারাংশ

The Texas Instruments LM324ADBR is a four-circuit general-purpose operational amplifier rated for a 30 V maximum supply, 1.2 MHz gain-bandwidth product, and 3 mV input offset voltage. The device is packaged in a 14-pin SSOP (DB) package and is intended for low-frequency signal conditioning, current-to-voltage conversion, and general amplifier applications operating from a single or dual supply.

An operational amplifier is a high-gain differential amplifier whose closed-loop behavior is established primarily by external feedback components. The LM324A family combines four amplifiers in one package, placing it in the operational-amplifier hierarchy alongside instrumentation, buffer, and comparator circuits while remaining part of the broader analog and power-management semiconductor ecosystem. Its common-mode input range allows the device to operate from single-supply or split-supply systems.

The LM324ADBR supports a 3 V to 32 V total supply range, has an approximately 1.2 MHz gain-bandwidth product, and specifies a maximum input offset voltage of 3 mV. The package operates from 0°C to 70°C, making the standard A-grade ordering option suitable for commercial and industrial equipment where extended-temperature operation is not required. Its four independent channels can implement non-inverting, inverting, summing, difference, and comparator functions.

Each channel uses a bipolar transistor input stage and an internally compensated architecture. Internal compensation removes the need for an external frequency-compensation capacitor in ordinary closed-loop operation. The 65 dB common-mode rejection and 16 V output swing support precision conditioning of mid-level signals, while the 60 mA per-channel output-current capability provides useful drive for higher-impedance loads.

Typical uses include sensor signal conditioning, low-side current measurement, audio preamplification, transducer interfaces, and general DC signal amplification. The quad configuration also allows a single package to implement a complete instrumentation channel, such as a two-op-amp differential stage plus two buffer or gain stages. The device is especially suitable where a supply voltage above 5 V is available but a rail-to-rail input or output is unnecessary.

Designers should verify common-mode input and output swing against the actual signal range, provide adequate bypassing close to the supply pins, and account for input offset and bias currents in high-impedance measurements. A stable feedback network and adequate output-load capability are also important because the LM324A is optimized for general-purpose, low-frequency precision rather than high-speed or rail-to-rail performance.

This product page combines the Texas Instruments ordering information, package and electrical characteristics, sourcing guidance, and practical design considerations into a focused engineering reference. It also identifies same-footprint family options and explains the trade-offs when comparing the LM324A with lower-cost or lower-performance amplifier implementations.

এর জন্য ড্রপ-ইন বিকল্প LM324ADBR — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible LM324ADBR (একই form factor এবং footprint) — পার্থক্য রয়েছে Operating Temperature Range, Package.

Texas Instruments
Operating Temperature Range: 0 °C to 70 °C
Package: SOIC-14 (D), 14 pins
এর সাথে তুলনা করুন LM324ADBR →

LM324AIDBR

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 14-pin SSOP (DB)
Temperature grade changes from 0°C to 70°C on LM324ADBR to the industrial-grade range on LM324AIDBR; the LM324A architecture, 30 V maximum supply, 14-pin DB footprint, and 1.2 MHz gain-bandwidth product remain comparable.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

LM324ADBR সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Amplifier Type Quad general-purpose operational amplifier
Number of Circuits 4 circuits
Maximum Supply Voltage 30 V
Operating Supply Voltage Range 3 V to 32 V
Gain-Bandwidth Product 1.2 MHz
Maximum Input Offset Voltage 3 mV
Input Bias Current 20 nA
Input Offset Current 0.2 uA
Common-Mode Rejection Ratio 65 dB
Output Current per Channel 60 mA
Output Voltage Swing -16 V to +16 V
Supply Current per Channel 0.2 mA
অপারেটিং তাপমাত্রার পরিসর 0°C to 70°C
প্যাকেজ 14-pin SSOP (DB)
Package Width 5.30 mm
Lead Pitch 0.209 mm
মাউন্টিং টাইপ Surface mount

LM324ADBR পিন কনফিগারেশন

Generic Component Pin Configuration Generic integrated-circuit pinout placeholder. Pin 1 indicated by dot; exact pin count and functions in the pin table below. 1 N 2 N-1 3 N-2 4 N-3 Pin Configuration See pin table below for pin functions Package-specific diagram not available
পিন 1 OUT1 — Output of amplifier 1
পিন 2 IN1- — Inverting input of amplifier 1
পিন 3 IN1+ — Non-inverting input of amplifier 1
পিন 4 GND — Ground connection
পিন 5 IN2+ — Non-inverting input of amplifier 2
পিন 6 IN2- — Inverting input of amplifier 2
পিন 7 OUT2 — Output of amplifier 2
পিন 8 OUT3 — Output of amplifier 3
পিন 9 IN3- — Inverting input of amplifier 3
পিন 10 IN3+ — Non-inverting input of amplifier 3
পিন 11 V+ — Positive supply voltage
পিন 12 IN4+ — Non-inverting input of amplifier 4
পিন 13 IN4- — Inverting input of amplifier 4
পিন 14 OUT4 — Output of amplifier 4

সাধারণ ব্যবহার

LM324ADBR এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Sensor Signal Conditioning, Low-Side Current Measurement, Audio Preamplification, Transducer Interface, Precision Voltage Divider, Portable Instrumentation.

🏭

Industrial Sensor Signal Conditioning

The LM324ADBR is suitable for conditioning signals from sensors that operate within its 3 V to 32 V supply range. Each of the four channels can amplify, filter, buffer, or subtract a sensor voltage, allowing one package to implement several stages of an analog measurement chain. Its 1.2 MHz gain-bandwidth product supports signals well below the amplifier's upper frequency limit, while 65 dB common-mode rejection helps suppress common-mode noise on long industrial wiring connections. The 60 mA per-channel output capability also permits useful drive into moderately resistive loads. Because the LM324A is not rail-to-rail, confirm that both input excursions and output swing remain within the headroom allowed by the selected supply.

⚡

Low-Side Current Measurement

A low-side shunt measurement circuit can use one LM324ADBR channel to amplify the small voltage generated across a current-sense resistor while another channel handles filtering or a reference buffer. The amplifier's 3 mV maximum input offset and 20 nA input bias current are important when the shunt produces only a small signal. A 1.2 MHz gain-bandwidth product permits useful closed-loop bandwidth at practical gain settings, and the 0.2 uA input offset current helps limit error in high-resistance sensing paths. Place the amplifier close to the shunt when possible to minimize pickup from motor and switching systems, and verify that common-mode voltage remains inside the input range.

🎧

Audio Preamplification

The LM324ADBR can implement a four-channel audio preamplifier or mixed-signal input stage when the signal bandwidth is below approximately 1.2 MHz and the supply provides adequate output headroom. Its quad organization reduces the number of packages required for microphone, line, and auxiliary channels. The internally compensated voltage-feedback topology supports conventional inverting and non-inverting gain stages with external resistors and capacitors. The 65 dB common-mode rejection can reduce unwanted hum and coupled noise, although actual audio performance also depends on resistor selection, source impedance, supply decoupling, and grounding. Choose a rail-to-rail low-noise device when the input can approach a supply rail or when lower-noise performance is required.

🔧

Transducer Interface

The four channels in the LM324ADBR can connect resistive, capacitive, or voltage-output transducers to a controller or converter stage. Two channels may form a differential input amplifier, while the remaining channels provide gain, filtering, or output buffering. The device accepts a total supply from 3 V to 32 V, making it adaptable to 5 V, 12 V, or 24 V system rails. Its 60 mA per-channel output current allows moderate load drive, but the output must remain between the practical swing limits rather than being assumed to reach either supply rail. Check the transducer output range and excitation requirements before finalizing the input network.

📊

Precision Voltage Divider

Two matched LM324ADBR channels can form a precision subtractor for measuring the difference between two voltages, such as the output of a resistive bridge. The 1.2 MHz gain-bandwidth product is more than adequate for slow sensor and instrumentation signals, while the 3 mV maximum offset establishes the baseline input-referred error to consider. A third or fourth channel can provide a low-impedance buffer for downstream conversion. Resistor matching and source impedance determine practical CMRR, so use a common resistor network where practical. The circuit should include a suitable reference and output-scaling stage to keep the amplifier within its common-mode and output-swing limits.

📱

Portable Instrumentation

The LM324ADBR fits portable battery-powered instrumentation when the rail-to-rail performance of a modern amplifier is not required. Its supply operation begins at 3 V, and four amplifiers in one 14-pin SSOP can provide gain, filtering, level shifting, and buffering within a limited circuit footprint. Low supply current and the compact package help reduce board area, while the 60 mA per-channel output rating covers moderate instrumentation loads. Designers should account for output headroom, input common-mode limits, and the 0°C to 70°C temperature range. For systems operating outside that range, evaluate LM324AIDBR and confirm all grade-specific limits before redesigning the board.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

LM324ADBR Texas Instruments ব্যবহৃত হয়: Industrial Sensor Signal Conditioning, Low-Side Current Measurement, Audio Preamplification, Transducer Interface, Precision Voltage Divider, Portable Instrumentation LM324AIDBR Industrial-temperature family alternative ব্যবহৃত হয়: Industrial Sensor Signal Conditioning, Transducer Interface, Portable Instrumentation
What is the operating voltage range of LM324ADBR?
The LM324ADBR operates from a 3 V to 32 V total supply, including single-supply or split-supply configurations. Texas Instruments identifies the device as a quad, 30 V, 1.2 MHz operational amplifier. Keep the supply within 30 V under all operating conditions, and confirm that the signal remains inside the amplifier's common-mode input range.
What are the key specifications of LM324ADBR that engineers should know?
The LM324ADBR combines four general-purpose operational amplifiers in a 14-pin SSOP package. According to the Texas Instruments LM324A product information, it supports a 3 V to 32 V supply, a 1.2 MHz gain-bandwidth product, a maximum 3 mV input offset voltage, 65 dB common-mode rejection, and a 60 mA output current per channel. Its 0°C to 70°C temperature range suits standard commercial equipment.
Where can I download the LM324ADBR datasheet PDF?
The official LM324A datasheet is available through the Texas Instruments LM324A product documentation. Open the LM324A product page, select LM324ADBR under part details, and use the datasheet link for the complete pin descriptions, electrical characteristics, and application guidance. The DB package drawing also confirms that LM324ADBR uses 14 pins.
Where can I find the LM324ADBR pinout?
The LM324ADBR pinout is published in the Texas Instruments LM324A datasheet. Four complete amplifier channels occupy the 14-pin SSOP: outputs are at pins 1, 7, 8, and 14; non-inverting inputs are at pins 3, 5, 10, and 12; inverting inputs are at pins 2, 6, 9, and 13; supply is pin 11; and ground is pin 4.
Is LM324ADBR suitable for single 5 V supply operation?
Yes, the LM324ADBR can operate from a single 5 V supply because its specified operating range begins at 3 V and extends to 32 V. It is not a rail-to-rail input amplifier, so the input signal must remain within the specified common-mode range. Output swing also does not reach either rail, so reserve sufficient headroom for the required load.
What is the LM324ADBR vs LM324ADR difference?
The principal difference is the package: LM324ADBR is supplied in a 14-pin SSOP DB package, while LM324ADR is supplied in a 14-pin SOIC package. Both are variants of the same Texas Instruments LM324A general-purpose amplifier family, but their land patterns are not interchangeable. A PCB designed for LM324ADBR should not accept LM324ADR without a footprint redesign.
When should I choose LM324ADBR over a rail-to-rail amplifier?
Choose LM324ADBR when the signal remains inside the common-mode range, the output has adequate swing margin, and a 3 V to 32 V supply is available. Its four channels, 1.2 MHz bandwidth, 65 dB common-mode rejection, and 60 mA per-channel output capability suit conventional industrial signal conditioning. Select a rail-to-rail amplifier instead when the input approaches a supply rail.
Can LM324AIDBR replace LM324ADBR in an existing design?
LM324AIDBR is a same-brand, same-family alternative that uses the 14-pin SSOP footprint, but its industrial temperature range differs from the 0°C to 70°C range of LM324ADBR. Before replacing the original device, verify the complete ordering information, temperature grade, supply limits, electrical limits, and package dimensions against the LM324A datasheet.
What can replace LM324ADBR?
LM324AIDBR is the closest same-family drop-in candidate because it retains the Texas Instruments LM324A architecture and 14-pin SSOP package. Its temperature grade extends beyond the standard LM324ADBR grade, while the core amplifier ratings remain comparable. Confirm every AC and DC parameter in the manufacturer datasheet before treating it as a drop-in replacement.
Is LM324ADBR the same as LM324AIDBR?
No, LM324ADBR and LM324AIDBR are related but not identical ordering options. Both belong to the Texas Instruments LM324A family and use the 14-pin SSOP DB package, while the suffix code identifies a different temperature grade. LM324ADBR is specified from 0°C to 70°C; LM324AIDBR carries an industrial temperature designation.
What is the best LM324A family replacement with the same pinout?
LM324AIDBR is the most practical same-brand family option to evaluate for LM324ADBR because it preserves the DB SSOP footprint and pin arrangement. The meaningful distinction is operating-temperature grade rather than the basic amplifier function. Review offset voltage, common-mode rejection, output swing, supply current, and lifecycle information in the Texas Instruments LM324A datasheet before release.
Where to buy LM324ADBR online?
Use the Request a Quote form on this page to request LM324ADBR pricing, stock confirmation, and lead time. The exact suffix identifies a 14-pin SSOP version, so the quote should explicitly reference LM324ADBR rather than only the broader LM324A family. Request the desired reel quantity, tray quantity, or other shipping format with the inquiry.
What is the price of LM324ADBR?
Use the Request a Quote form on this page for the current unit pricing and quantity breaks for LM324ADBR. Pricing depends on order quantity, package form, stock position, and required delivery date. Quote requests are preferable to static price statements because distributor inventories and commercial terms can change without notice.
What is the lead time for LM324ADBR?
Request the current lead time through the Request a Quote form on this page. Provide your required quantity, production schedule, and preferred shipment format so the manufacturer or authorized supply channel can confirm the most accurate timing. The 0°C to 70°C A-grade ordering option should be specified exactly to avoid confusion with other LM324A variants.
Is LM324ADBR in stock?
Use the Request a Quote form on this page to obtain a current stock response for LM324ADBR. Include the quantity and shipment form required by your production plan. Because availability can fluctuate, treat only the confirmation returned for your specific order as the current supply status rather than relying on an older catalog record.
Does LM324ADBR require external compensation?
No external compensation capacitor is required for normal closed-loop operation because the Texas Instruments LM324A amplifiers are internally compensated. The compensation is optimized for typical voltage-feedback use and unity-gain stability. High-gain layouts still require careful feedback routing, grounding, and decoupling to prevent oscillation and to achieve the expected bandwidth.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা LM324ADBR — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose LM324ADBR for conventional low-frequency signal-conditioning designs that use a 3 V to 32 V supply, operate from 0°C to 70°C, and do not require rail-to-rail input or output behavior. Its four channels, 1.2 MHz gain-bandwidth product, 65 dB common-mode rejection, and 60 mA per-channel output capability suit sensor interfaces, audio preamplification, buffering, and general instrumentation. LM324AIDBR is the closest same-family drop-in candidate when an industrial temperature grade is beneficial; its package and core amplifier architecture remain comparable, but the ordering code and grade-specific limits must be checked. Select a rail-to-rail amplifier instead when inputs or outputs must approach the supply rails. Also avoid using LM324ADR as a direct substitute because it uses a SOIC package rather than the 14-pin SSOP DB footprint of LM324ADBR.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য LM324AIDBR
Brand Texas Instruments Texas Instruments
Package 14-pin SSOP (DB) 14-pin SSOP (DB)
Amplifier Configuration Quad Quad
Maximum Supply Voltage 30 V 30 V
Operating Supply Voltage Range 3 V to 32 V 3 V to 32 V
Gain-Bandwidth Product 1.2 MHz 1.2 MHz
Maximum Input Offset Voltage 3 mV 3 mV
Common-Mode Rejection Ratio 65 dB 65 dB
Output Current per Channel 60 mA 60 mA
Operating Temperature Range 0°C to 70°C Industrial-temperature grade

মূল পার্থক্যসমূহ

  • Four general-purpose amplifiers in one compact package (বনামLM324AIDBR)
  • Wide total supply range (বনামLM324AIDBR)
  • Moderate output-drive capability (বনামLM324AIDBR)

ডিজাইন নোট

Place the supply-bypass capacitor as close as practical to pin 11, and connect pin 4 to the ground plane with a short, low-inductance path. For noise-sensitive signal conditioning, provide local return paths that keep output currents from sharing the input-reference ground segment. The 14-pin SSOP footprint has fine lead pitch, so inspect solder bridging and pad wetting during assembly.

Do not assume rail-to-rail input or output behavior. The input voltage must remain inside the common-mode range, and the output must retain the required headroom below the positive rail and above the negative rail. A 5 V design that attempts to amplify a signal spanning nearly 0 V to 5 V may clip even though the supply itself is within the LM324A operating range.

Keep feedback-resistor networks close to their associated amplifier pins and avoid routing input and output traces in parallel. The 1.2 MHz gain-bandwidth product makes the LM324A suitable mainly for low-frequency and audio-band conditioning, but high closed-loop gain reduces bandwidth and can expose layout instability. Use a stable, low-capacitance feedback topology and verify the completed board with an oscilloscope.

Use a single supply or a split supply only after checking the absolute maximum and common-mode limits. The LM324ADBR supports a 3 V to 32 V total supply and a 30 V maximum rating, but approaching the upper limit reduces design margin for transient overshoot. Select a supply system with controlled startup, adequate decoupling, and a maximum operating voltage below the device limit.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The manufacturer ordering information identifies the LM324ADBR as a standard 0°C to 70°C amplifier in a DB package. No explicit environmental or material-compliance declarations were included in the referenced material.

ডেটা যাচাই করা হয়েছে: 2026-11-17 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

LM324ADBR datasheet LM324ADBR pinout LM324ADBR datasheet pdf LM324ADBR 14-SSOP LM324ADBR 1.2MHz amplifier LM324ADBR 30V op amp LM324ADBR equivalent LM324ADBR replacement LM324ADBR vs LM324AIDBR LM324ADBR vs LM324ADR LM324ADBR price LM324ADBR stock Texas Instruments LM324ADBR LM324ADBR signal conditioning LM324ADBR sensor amplifier

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments LM324ADBR LM324A LM324AIDBR LM324ADR quad operational amplifier voltage-feedback amplifier analog IC semiconductor single-supply operation split-supply operation common-mode voltage gain-bandwidth product input offset voltage input bias current common-mode rejection ratio 14-pin SSOP DB package surface mount SMD signal conditioning current-to-voltage conversion sensor interface internal compensation
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন