Texas Instruments

LM393APWR - 38V Dual Comparator | Texas Instruments

MPN: LM393APWR ✓ সক্রিয়
38 V Vdss 3.5 nA Id 8-pin TSSOP (PW) Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

LM393APWR সারাংশ

The Texas Instruments LM393APWR is a dual differential comparator with a 38 V maximum supply rating, rail-to-rail input capability, and open-collector outputs, housed in an 8-pin TSSOP package. The two independent comparator channels support common-mode voltages that include ground, while each output can sink logic-level current for interfacing with TTL, MOS, and CMOS systems. The device combines a low input offset voltage of 0.37 mV, low input bias current of 3.5 nA, and typical supply current of 200 µA per comparator.

A differential comparator is an analog integrated circuit that compares two input voltages and changes its output state when one input becomes higher than the other. The LM393 family belongs to the comparator hierarchy within analog signal processing and power-management interfaces. Its open-collector architecture requires an external pull-up resistor, allowing the output to operate at a voltage selected by the surrounding digital circuit rather than being fixed internally by the comparator.

The precision A-grade version provides an input offset voltage of 0.37 mV, making it suitable for threshold decisions where small differential signals must be resolved accurately. Input bias current of 3.5 nA limits the voltage error created when source impedances interact with the comparator inputs. A typical supply current of 200 µA per comparator supports low-power operation, and the stated 2 kV HBM ESD rating provides useful handling robustness for industrial equipment.

Each channel contains independent differential inputs and an open-collector output. The output can pull a logic node low while the external pull-up establishes the high state, which permits wired logic, level translation, and straightforward interfacing to microcontroller input pins. Because the outputs are open collector, multiple comparator outputs can share a common pull-up when the application requires wired-AND behavior. The device is intended for operation from a single supply or from split supplies where the input common-mode range remains valid.

Typical applications include industrial sensor threshold detection, overvoltage and undervoltage protection, battery monitoring, temperature-switch interfaces, motor and relay control, and window-comparison functions in control systems. The rail-to-rail input characteristic is particularly useful in single-supply circuits where a signal may approach ground. The 8-pin TSSOP package also supports compact analog boards while exposing both comparator channels and the common supply pins.

Designers should place input resistors close to the comparator pins when the source impedance is high, because input bias current and resistor noise can create differential errors. The open-collector outputs must each have a pull-up resistor, and the chosen resistor should balance rise time, power consumption, and the sink-current capability of the output. Designers must also verify the input and output voltages against the limits of the selected supply configuration.

This page combines the core electrical characteristics, package and pinout details, practical application guidance, and qualified drop-in alternatives for engineers evaluating the LM393APWR. It also highlights the open-collector interface requirements and the key electrical differences that should be checked before replacing the part in an existing PCB design.

এর জন্য ড্রপ-ইন বিকল্প LM393APWR — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible LM393APWR (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Output Type, Maximum Supply Voltage, Comparator Type, Input Bias Current.

Texas Instruments
Package: TSSOP (PW), 8 pins
Output Type: Open-collector, rail-to-rail
Maximum Supply Voltage: 36 V
এর সাথে তুলনা করুন LM393APWR →
Texas Instruments
Package: 8-TSSOP
Output Type: Open-collector
Maximum Supply Voltage: 30 V
এর সাথে তুলনা করুন LM393APWR →
Texas Instruments
Output Type: Open-collector
এর সাথে তুলনা করুন LM393APWR →

LM393BPWR

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 8-pin TSSOP (PW)
Revised B-version specifications with the 38 V maximum rating and approximately 200 µA per-comparator supply current retained, representing a 0% change in those headline ratings

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

LM2903APWR

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 8-pin TSSOP (PW)
Automotive-family A-grade variant with the 38 V maximum supply rating and 200 µA typical current architecture retained, representing a 0% change in those headline ratings

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

LM2903BPWR

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 8-pin TSSOP (PW)
B-version automotive-family update with the 38 V maximum rating and approximately 200 µA per-comparator supply current retained, representing a 0% change in those headline ratings

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

LM2903QPWRQ1

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Texas Instruments
📦 8-pin TSSOP (PW)
Dual differential comparator · 2 channels · Open-collector, rail-to-rail · 36 V · Single or dual supply · 0.4 mA typical per comparator · 25 nA typical · 3 nA typical

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LM393APWR সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Comparator Type Dual differential comparator
আউটপুট টাইপ Open collector
Number of Channels 2 channels
Maximum Supply Voltage 38 V
Common-Mode Input Range Includes ground; rail-to-rail input
Input Offset Voltage 0.37 mV
Input Bias Current 3.5 nA
সাপ্লাই কারেন্ট 200 µA per comparator
ESD Rating 2 kV HBM
Output Compatibility TTL, MOS, and CMOS
Grade Precision A grade
Temperature Grade Industrial grade
প্যাকেজ 8-pin TSSOP (PW)
মাউন্টিং টাইপ Surface mount
Differential Input Voltage Range ±38 V maximum supply-rated range

LM393APWR পিন কনফিগারেশন

TSSOP-8 Package Pinout Diagram TSSOP-8 8-pin thin shrink small outline, P0.65mm, JEDEC MO-153. 1 8 2 7 3 6 4 5 TSSOP-8
পিন 1 OUT 1 — Open-collector output for comparator channel 1
পিন 2 IN 1- — Inverting input for comparator channel 1
পিন 3 IN 1+ — Non-inverting input for comparator channel 1
পিন 4 GND — Ground connection
পিন 5 IN 2+ — Non-inverting input for comparator channel 2
পিন 6 IN 2- — Inverting input for comparator channel 2
পিন 7 OUT 2 — Open-collector output for comparator channel 2
পিন 8 VCC — Positive supply connection

সাধারণ ব্যবহার

LM393APWR এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Sensor Threshold Detection, Battery Overvoltage and Undervoltage Protection, Temperature Switch and Fan Control, Motor and Relay Limit Detection, Window Comparator for Power Supply Monitoring, LED and Backlight Drive Control.

🏭

Industrial Sensor Threshold Detection

The LM393APWR is appropriate for monitoring a sensor signal against a reference voltage in industrial control equipment. Its 0.37 mV input offset voltage helps distinguish small threshold changes, while the common-mode input range includes ground for sensors whose output approaches 0 V. Connect the sensor and reference to one differential input pair and use the other channel for a second limit. The open-collector output can pull down a controller input through an external pull-up resistor, making the interface straightforward. Because the output is open collector, the engineer must select a pull-up value that provides adequate switching speed without excessive supply current, while also checking sensor impedance and input-bias-current error.

⚡

Battery Overvoltage and Undervoltage Protection

The LM393APWR can compare a scaled battery voltage against two reference levels to detect overvoltage or undervoltage conditions. Its low 3.5 nA input bias current minimizes the error introduced by high-value divider resistors, and the 0.37 mV offset improves threshold precision. The rail-to-rail input characteristic supports low-voltage battery systems, while the 38 V maximum supply rating covers higher-energy industrial battery packs when appropriately protected. Each open-collector output can directly pull a system enable, charger-control, or isolation-barrier input low. A pull-up resistor is required on every output, and the divider, clamp, and reference tolerances should be included in the final trip-point error calculation.

🔧

Temperature Switch and Fan Control

The LM393APWR can compare the voltage from a thermistor bridge against a precision reference to create a temperature-switch signal. Its low input offset voltage preserves accuracy when the sensing network operates close to the comparator threshold, and the common-mode range that includes ground supports simple single-supply divider arrangements. The open-collector output can drive a relay, MOSFET, or digital enable signal after adding the required pull-up resistor and, where necessary, an output driver. In fan-control designs, hysteresis is important to prevent rapid switching near the trip point; the two independent comparator channels can implement separate turn-on and turn-off thresholds or control heating and cooling outputs. Check the input network against the 3.5 nA bias current when resistor values are high.

🔧

Motor and Relay Limit Detection

The LM393APWR is useful in motor-control and relay-protection circuits where a feedback voltage must be compared with a reference. The rail-to-rail input allows the feedback signal to operate near ground, while the 38 V maximum rating supports systems with higher transient voltage when suitable protection is included. Each open-collector output can pull down a driver input, fault flag, or relay-control logic and can share a pull-up when wired-AND fault reporting is desired. The low 0.37 mV offset can improve the resolution of a finely adjusted limit. Engineers should add filtering or hysteresis to avoid nuisance trips from switching noise, and should verify that the load connected to the open-collector output stays within the comparator's sink-current and absolute-maximum limits.

⚡

Window Comparator for Power Supply Monitoring

The two channels of the LM393APWR can form a window comparator for monitoring a power rail between a lower and an upper limit. Each channel compares the scaled rail voltage with its own reference, and the two open-collector outputs can be combined to indicate whether the voltage is inside or outside the permitted window. The 3.5 nA input bias current reduces divider-induced error, and the 0.37 mV offset provides useful threshold precision. A shared pull-up or individual pull-ups determine the combined logic behavior. The implementation must account for input noise, reference accuracy, propagation delay, and the time required for the outputs to transition. For systems with fast transients, add filtering or a latch so that a short disturbance does not create an unintended fault indication.

💡

LED and Backlight Drive Control

The LM393APWR can compare a dimming-control or sensing signal with a reference and provide a fault or enable signal for an LED or backlight driver. Its rail-to-rail input supports low-voltage control signals, and the open-collector output works with a pull-up when the downstream device accepts an active-low fault input. In a multi-channel backlight system, the two independent channels can monitor separate conditions while each output provides a wired-AND fault indication. The low 0.37 mV input offset improves comparison accuracy near the threshold, but LED-driver ripple must still be filtered to prevent false triggering. Select the pull-up resistor to balance low power consumption against acceptable output rise time, and confirm that the downstream LED driver recognizes the resulting logic levels.

What is the operating voltage range of LM393APWR?
The LM393APWR supports a maximum supply rating of 38 V and is suitable for low- and high-voltage analog comparison circuits. According to the Texas Instruments LM393A datasheet, its common-mode input range includes ground and its differential input range is equal to the maximum-rated supply voltage of ±38 V. Actual operating limits must remain within the ratings specified for the selected device and supply arrangement.
What are the key specifications of LM393APWR that engineers should know?
The LM393APWR is a dual, precision-grade comparator with a 38 V maximum supply rating, rail-to-rail inputs, and open-collector outputs. The Texas Instruments LM393A datasheet specifies 0.37 mV input offset voltage, 3.5 nA input bias current, 200 µA typical supply current per comparator, and a 2 kV HBM ESD rating. It is packaged for surface-mount assembly in an 8-pin TSSOP package.
Where can I download the LM393APWR datasheet PDF?
The LM393APWR datasheet and ordering information are available from the Texas Instruments LM393A product page at https://www.ti.com/product/LM393A. According to the manufacturer product page, the device is the precision dual differential comparator in the industrial A-grade family. Use the datasheet linked from that page for the authoritative pin description, electrical limits, timing characteristics, and application guidance.
Where can I find the LM393APWR pinout?
The LM393APWR pinout is available in the pin-description table of the Texas Instruments LM393A datasheet. The 8-pin TSSOP device uses pins 1 and 7 for the two open-collector outputs, pins 2 and 6 for the inverting inputs, pins 3 and 5 for the non-inverting inputs, pin 4 for ground, and pin 8 for the positive supply. Use the manufacturer pin-description table when assigning PCB tracks.
What can replace LM393APWR?
The LM393BPWR is the closest same-manufacturer replacement because it retains the 8-pin TSSOP footprint and dual open-collector comparator architecture while using the revised B-version specifications. According to the Texas Instruments LM393A product page, the B-version is a drop-in replacement for the original LM393 family. Confirm timing, common-mode limits, and automotive qualification requirements before substituting it into a qualified design.
Is LM393APWR the same as LM2903APWR?
The LM2903APWR is a related dual open-collector comparator in the same TSSOP family, but its automotive-oriented ordering designation and grade should be reviewed before substitution. According to the Texas Instruments LM393A family information, the LM2903 shares the basic dual-comparator architecture and output style. The key differences involve qualification and grade, so verify the complete electrical table for the intended operating environment.
LM393APWR vs LM393BPWR: which is better for a new design?
Choose the LM393BPWR for a new design when its revised B-version electrical characteristics fit the timing and accuracy requirements, because the manufacturer identifies it as a drop-in replacement for the original LM393 family. Retain the LM393APWR when an existing design specifically calls out the precision A grade. According to Texas Instruments, both families use the same basic dual open-collector architecture, so package and pin compatibility remain central to replacement.
When should I choose LM393APWR over LM2903APWR?
Choose the LM393APWR for an industrial design that specifies the precision A grade and does not require automotive qualification. Choose the LM2903APWR when the assembly is automotive-oriented and its documented qualification and temperature requirements match the application. According to the Texas Instruments LM393A product page, the families share the dual differential comparator and open-collector output concept, making electrical grade and qualification the decisive selection criteria.
Is LM393APWR suitable for single-supply sensor threshold detection?
Yes, the LM393APWR is suitable for many single-supply sensor threshold-detection circuits because its common-mode input range includes ground and its inputs are described as rail-to-rail. According to the Texas Instruments LM393A datasheet, it has a 0.37 mV input offset voltage and 3.5 nA input bias current. The sensor source impedance and pull-up resistor must still be checked for offset, noise, and switching-speed errors.
How do I interface the LM393APWR open-collector output to a microcontroller?
Connect a pull-up resistor from each LM393APWR output to the microcontroller input's active-high supply, and connect the open-collector output directly to that input. According to the Texas Instruments LM393A datasheet, the outputs are compatible with TTL, MOS, and CMOS logic. Choose the pull-up value to balance transition time against power consumption, and ensure that the microcontroller input remains below its allowed voltage.
What pull-up resistor should be used with LM393APWR?
A common pull-up value of 10 kΩ is often appropriate for a 5 V CMOS input, but the correct resistance depends on input capacitance, required rise time, leakage current, and output sink current. According to the Texas Instruments LM393A datasheet, the output is open collector and must be pulled up externally. Calculate the maximum resistor for the target rise time, then verify that the required low-state current remains within the output rating.
What is the best Texas Instruments equivalent for LM393APWR?
The LM393BPWR is the leading same-manufacturer option because it uses the same 8-pin TSSOP footprint and provides the revised B-version specifications. According to the Texas Instruments LM393A product page, the B-version is intended as a drop-in replacement for the original LM393. Confirm the complete AC and DC specifications, operating-temperature limits, and any automotive qualification requirement before approving the substitution.
Where can I buy LM393APWR online?
Use the Request a Quote form on this page to request LM393APWR availability, current lead time, and order quantity from XAIPART. The manufacturer identifies LM393APWR as an active part of the LM393A family in an 8-pin TSSOP package. A current written quote is preferable to a static listing because component inventory, lot availability, and delivery schedules can change.
What is the price of LM393APWR?
Request the current LM393APWR quotation through the Request a Quote form on this page. The price depends on order quantity, package suffix, production allocation, and current component availability. The manufacturer product page identifies LM393APWR as the A-grade precision variant in an 8-pin TSSOP package, allowing the quotation to be tied to the exact ordered MPN.
What is the lead time and stock status for LM393APWR?
Request current stock, minimum order quantity, and lead time through the Request a Quote form on this page. The Texas Instruments product page identifies LM393APWR as the industrial A-grade LM393A device in an 8-pin TSSOP package, but live availability depends on manufacturing and distribution conditions. The quote request can therefore confirm the exact quantity and current delivery commitment.
Does LM393APWR comply with RoHS and REACH?
The RoHS and REACH status should be confirmed from the current Texas Instruments material-compliance documentation for the ordered part. The manufacturer product page identifies LM393APWR as an industrial-grade LM393A variant, while material-compliance declarations can depend on the specific ordering suffix and regional requirements. Request the compliance record before treating the component as qualified for a restricted bill of materials.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা LM393APWR — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose LM393APWR for industrial designs that specify a precision A-grade, dual open-collector comparator in an 8-pin TSSOP package. Its 0.37 mV input offset, 3.5 nA input bias current, and common-mode range including ground make it suitable for sensor thresholds, battery limits, window monitoring, and relay-control interfaces. Consider LM393BPWR when the revised B-version specifications better match a new design and the manufacturer identifies it as a drop-in replacement for the original LM393 family. Consider LM2903APWR or LM2903BPWR when the design calls for that automotive-family ordering line rather than the LM393A grade. LM2903QPWR is appropriate when its automotive qualification is required. For every alternative, confirm the complete electrical limits, timing, temperature range, qualification, and open-collector pull-up requirements before approving a substitution.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য LM393BPWR LM2903APWR LM2903BPWR LM2903QPWR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 8-pin TSSOP (PW) 8-pin TSSOP (PW) 8-pin TSSOP (PW) 8-pin TSSOP (PW) 8-pin TSSOP (PW)
Grade Precision A grade, industrial grade B version A grade B version Q automotive ordering designation

মূল পার্থক্যসমূহ

  • Precision A-grade threshold accuracy (বনামLM393BPWR)
  • Low input bias for high-impedance sensing (বনামLM2903APWR)
  • Direct industrial A-grade family positioning (বনামLM2903QPWR)

ডিজাইন নোট

Do not treat the open-collector output as a push-pull logic output. Each output requires an external pull-up resistor, and its high voltage is determined by that resistor and the connected logic supply. Omitting the pull-up leaves the node floating. When combining outputs, confirm that all devices can tolerate the resulting shared pull-up voltage and that the sink current remains within the comparator's specified output-current limits.

Keep the comparator input traces short and place any input resistors close to the relevant pins. The 3.5 nA input bias current can create a measurable voltage error when driven through a high source impedance. Avoid routing the inputs alongside motor-switch nodes and relay contacts, and use a local reference bypass capacitor where the reference source is not already adequately decoupled.

Choose the pull-up resistor using the required logic rise time, input capacitance, and available output sink current. A smaller pull-up produces faster rising edges but increases supply current during the low output state. A larger pull-up reduces power consumption but slows transitions and increases susceptibility to capacitive noise. Validate the resulting network with the actual logic input and board capacitance rather than relying only on a nominal logic rise-time target.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The manufacturer identifies LM393APWR as an industrial-grade part. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations should be confirmed for the exact ordering suffix before release to a restricted bill of materials.

ডেটা যাচাই করা হয়েছে: 2026-11-13 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

LM393APWR LM393APWR datasheet LM393APWR datasheet pdf LM393APWR pinout LM393APWR schematic LM393APWR equivalent LM393APWR replacement LM393APWR cross reference LM393APWR footprint LM393APWR price LM393APWR stock Texas Instruments LM393APWR LM393APWR TSSOP-8 pinout LM393APWR open collector application circuit LM393APWR vs LM393BPWR

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments LM393APWR LM393BPWR LM2903APWR LM2903BPWR LM2903QPWR LM393A dual differential comparator analog comparator analog integrated circuit comparator IC open-collector output rail-to-rail input common-mode voltage input offset voltage input bias current supply current TSSOP-8 TSSOP package family surface-mount technology industrial-grade semiconductor sensor threshold detection window comparator battery protection
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন