ROHM Semiconductor

LMR344F-GE2 - Low-Power Quad CMOS Op Amp | ROHM

MPN: LMR344F-GE2 ✓ সক্রিয়
2.7 V to 5.5 V Vdss 32 mA per channel Id 14-pin SOP, 0.173 in x 4.40 mm body width Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

LMR344F-GE2 সারাংশ

ROHM Semiconductor LMR344F-GE2 is a low-power, four-circuit CMOS operational amplifier with rail-to-rail input and output operation, optimized for 2.7 V to 5.5 V operation in a 14-pin SOP package. It combines low supply current, low input bias current, input ground sensing, and full-swing output capability for portable and low-voltage analog systems.

A CMOS operational amplifier is a voltage-gain device used to amplify weak sensor, audio, or feedback signals while operating from a low-voltage supply. The LMR344F belongs to the operational-amplifier hierarchy, where it provides input-ground sensing and rail-to-rail signal handling for battery-powered equipment, monitoring circuits, and voice audio preamplifiers. Rail-to-rail operation helps preserve usable input and output range when the supply voltage is restricted.

The LMR344F family is designed for low operating supply voltage, low supply current, and low input bias current. Its four amplifiers share a common 14-pin SOP package, reducing board area in designs that require multiple signal-conditioning channels. The input-ground-sensing architecture is especially useful when an input signal is referenced to ground rather than to the midpoint of the supply rails.

Full-swing output operation allows the amplifier outputs to approach the available supply-rail limits under suitable load conditions. This behavior is valuable in low-voltage systems where signal headroom is limited. The exact bandwidth, slew rate, input offset, noise, and output-current limits should be confirmed against the manufacturer datasheet before defining the closed-loop gain, load, and stability target of a new design.

Typical applications include current sensing, portable instrumentation, battery monitoring, sensor signal conditioning, and voice audio preamplification. Multiple amplifiers in one package can support gain stages, differential front ends, filters, output drivers, or active feedback networks when their individual input, output, common-mode, and stability requirements match.

For PCB implementation, use the manufacturer pin-description table to assign inputs, outputs, supply rails, and any unused amplifier channels. Keep input and feedback routing short, connect decoupling capacitors close to the supply pins, and provide stable feedback around each amplifier. Verify operation across the complete supply range and load range rather than assuming rail-to-rail input and output alone guarantees usable bandwidth.

This product page combines the manufacturer product information with practical device classification, application guidance, design notes, and a same-package alternative assessment. It is intended to help engineers identify the correct amplifier function, validate package compatibility, and plan a robust low-voltage analog implementation.

এর জন্য ড্রপ-ইন বিকল্প LMR344F-GE2 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

LMR344FJ-GE2

✅ ড্রপ-ইন
📦 14-SOPJ
Same LMR344F four-channel CMOS family; listed gain-bandwidth product of 2 MHz and slew rate of 1 V/us, while package suffix denotes 14-SOPJ rather than the GE2 14-SOP designation.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

LMR344F-GE2 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Number of Amplifier Channels 4 circuits
Amplifier Type CMOS operational amplifier
Operating Supply Voltage Range 2.7 V to 5.5 V
Input Common-Mode Behavior Rail-to-rail
Output Swing Behavior Full swing; rail-to-rail output
Input Bias Feature Input ground sense
সাপ্লাই কারেন্ট 32 mA per channel
প্যাকেজ 14-pin SOP, 0.173 in x 4.40 mm body width
মাউন্টিং টাইপ Surface mount

LMR344F-GE2 14-pin sop, 0.173 in x 4.40 mm body width পিন কনফিগারেশন গাইড

LMR344F-GE2 (14-pin sop, 0.173 in x 4.40 mm body width প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।

LMR344F-GE2-এর জন্য 14-pin sop, 0.173 in x 4.40 mm body width প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি LMR344F-GE2.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

LMR344F-GE2 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Portable Sensor Signal Conditioning, Battery Monitoring and Threshold Control, Voice Audio Preamplification, Current and Voltage Sensing, Precision Analog Measurement Front End, Low-Voltage Output and Feedback Driver.

🧩

Portable Sensor Signal Conditioning

The LMR344F-GE2 fits low-voltage sensor front ends because it combines four CMOS amplifier channels with rail-to-rail input operation in a 2.7 V to 5.5 V supply environment. Input ground sensing is useful when the sensor signal is referenced to ground, while the low-power operating characteristics align with portable equipment. Each channel can provide gain or active filtering, and input offset voltage, noise, and common-mode limits should be checked against the sensor output. Place the amplifier and its feedback components close to the sensor interface to reduce parasitic pickup, and use the manufacturer pin table when assigning unused amplifier channels.

⚡

Battery Monitoring and Threshold Control

The LMR344F-GE2 is appropriate for battery-powered monitoring circuits that operate across low supply rails. Its four channels allow one device to handle cell sensing, reference comparison, filtering, and an output-conditioning stage when all nodes remain within the 2.7 V to 5.5 V operating range. The low input bias current helps avoid loading high-impedance battery dividers, and rail-to-rail input operation supports signals near either supply limit. The designer must still protect inputs against transient battery voltages and verify that the amplifier output can drive the required load and remain within its guaranteed output swing.

🎧

Voice Audio Preamplification

The LMR344F-GE2 supports voice audio preamplification because the LMR344F family is identified for low-voltage audio preamplifier applications. Four channels in one 14-pin SOP can support microphone gain, filtering, mixing, or output buffering while conserving board area. Rail-to-rail input operation helps accommodate low-voltage microphone signals, and full-swing output supports amplitude utilization on a restricted supply. Verify input-noise density, gain accuracy, output swing, and channel matching in the manufacturer electrical characteristics, and use short, shielded routing for microphone inputs to prevent acoustic and electrical pickup.

🏭

Current and Voltage Sensing

The LMR344F-GE2 can condition outputs from low-voltage current and voltage sensors when low input bias current and rail-to-rail input behavior are important. Four channels permit sharing a package across sensing, filtering, gain, and reference stages, reducing component count in compact measurement electronics. Input ground sensing is beneficial when the transducer signal is ground-referenced. The circuit remains usable only if the sensor common-mode voltage and shunt voltage stay inside the amplifier's specified range. Confirm shunt-generated signal polarity, input offset error, output-current capability, and stability with the selected feedback network before release.

🔬

Precision Analog Measurement Front End

The LMR344F-GE2 suits measurement front ends that require several low-voltage gain stages around a converter or instrumentation block. The four-channel 14-SOP package can implement differential amplification, anti-alias filtering, level shifting, and output buffering without using four separate packages. Its input-ground-sense architecture supports ground-referenced measurement chains, while the 2.7 V to 5.5 V supply range supports compact laboratory and industrial equipment. For precision results, evaluate offset voltage, bias current, noise, channel matching, and the gain error of the selected resistors against the measurement budget.

🔧

Low-Voltage Output and Feedback Driver

The LMR344F-GE2 can serve as a low-voltage buffer or feedback amplifier where full-swing output and rail-to-rail input behavior improve usable signal range. Four independent channels support gain-stage, active-feedback, filtering, and auxiliary buffering functions within one 14-pin SOP package. This consolidation is useful in compact control and monitoring electronics powered from a 2.7 V to 5.5 V source. Because full swing does not guarantee the same output range at every load, verify the required load current, capacitive-load tolerance, gain bandwidth, and phase margin. Maintain short feedback paths and provide local supply bypassing to limit instability and supply ripple coupling.

What is the LMR344F-GE2?
The LMR344F-GE2 is a four-channel CMOS operational amplifier from ROHM Semiconductor designed for low-voltage, low-power analog systems. According to the manufacturer product page, the LMR344F family provides input ground sensing, full-swing output operation, low operating supply voltage, low supply current, and low input bias current. The GE2 ordering code is supplied in a 14-pin SOP package.
What are the key specifications of LMR344F-GE2 that engineers should know?
The LMR344F-GE2 combines four CMOS amplifier channels, rail-to-rail input operation, full-swing output operation, input ground sensing, and a 2.7 V to 5.5 V supply range in a 14-pin SOP package. ROHM identifies the family as low-power and suitable for sensor amplification, battery monitoring, portable equipment, and voice audio preamplification. The listed supply-current figure is 32 mA per channel.
What is the operating voltage of LMR344F-GE2?
The LMR344F-GE2 operates from 2.7 V to 5.5 V according to the exact-MPN component listing and manufacturer family information. The low-voltage range makes the amplifier suitable for portable and battery-powered systems. When designing the circuit, include enough supply headroom for the intended output swing and confirm operation at both supply limits.
What does rail-to-rail input and output mean for LMR344F-GE2?
Rail-to-rail operation means the amplifier can accept input signals and produce output signals over a range extending toward the supply rails rather than being restricted to a midpoint common-mode range. The manufacturer describes the LMR344F as an input-ground-sense amplifier with full-swing output. This is useful in low-voltage systems where the usable signal range is limited, although actual swing limits depend on output load and supply voltage.
Where can I download the LMR344F-GE2 datasheet PDF?
The official LMR344F family documentation is available from the linked ROHM product page, which provides the manufacturer datasheet for the LMR344F device family and its ordering options. The LMR344F-GE2 is identified as the 14-SOP GE2 configuration. Use the pin-description, electrical-characteristics, and recommended-layout sections when assigning pins and designing the PCB.
Where can I find the LMR344F-GE2 pinout?
The LMR344F-GE2 pin assignments are defined in the manufacturer datasheet linked from the ROHM LMR344F product page. The device uses a 14-pin SOP package containing four operational amplifiers and their associated supply connections. Use the datasheet pin-description table when connecting each amplifier because unused channels require the specified handling rather than being treated as ordinary input terminals.
Is LMR344F-GE2 suitable for sensor signal conditioning?
Yes, the LMR344F-GE2 is suitable for sensor signal conditioning because ROHM identifies the family for sensor amplifiers and battery-powered equipment. Its 2.7 V to 5.5 V operating range supports low-voltage sensor systems, while input ground sensing and low input bias current help preserve weak sensor signals. Input offset, noise, and common-mode limits must still be checked against the sensor's output range.
Can LMR344F-GE2 be used in battery monitoring circuits?
The LMR344F-GE2 can be used in battery-monitoring circuitry when the measured voltage remains inside the amplifier's 2.7 V to 5.5 V supply range or is appropriately conditioned. ROHM specifically identifies battery monitoring as an LMR344F application. Protection, common-mode headroom, input offset error, and output-load requirements should be evaluated for each battery chemistry and measurement topology.
Can LMR344FJ-GE2 replace LMR344F-GE2?
The LMR344FJ-GE2 is the closest identified alternative in the same LMR344F family and shares the four-channel CMOS, 2.7 V to 5.5 V, 2 MHz gain-bandwidth-product and 1 V/us slew-rate characteristics described for that ordering option. However, its listing identifies a 14-SOPJ package rather than the GE2 14-SOP designation. Confirm land-pattern and pinout equivalence against the manufacturer datasheet before treating it as a drop-in replacement.
What is the best drop-in replacement for LMR344F-GE2?
No fully verified cross-manufacturer drop-in replacement is established for the LMR344F-GE2. The closest device identified is the ROHM Semiconductor LMR344FJ-GE2, a member of the same LMR344F amplifier family, but its 14-SOPJ package designation differs from the GE2 14-SOP listing. Use a Request a Quote form on this page for availability of the exact MPN rather than assuming an unspecified substitute is mechanically interchangeable.
Is there another manufacturer's equivalent for LMR344F-GE2?
No verified another-manufacturer equivalent was established for the LMR344F-GE2 with both the 14-pin SOP footprint and pin-compatible function. The cross-reference search returned general comparison tools and the original ROHM family page, but it did not identify a qualifying competitor part. A valid substitute must match supply range, input bias current, common-mode behavior, output swing, stability, noise, and the exact PCB land pattern.
When should I choose LMR344F-GE2 over a single or dual amplifier?
Choose the LMR344F-GE2 when a compact design needs four low-voltage amplifier functions and board area is constrained. Its 14-pin SOP package consolidates four CMOS channels while retaining rail-to-rail input capability and full-swing output operation. Select a lower-channel-count device when unused channels would create unnecessary cost, board area, or power consumption for the actual design.
Is LMR344F-GE2 suitable for voice audio preamplifiers?
Yes, ROHM identifies voice audio preamplification as a suitable application for the LMR344F family. The four-channel 14-SOP configuration can implement multiple low-voltage gain stages, and the full-swing output behavior supports signal paths with limited headroom. For microphone or line-level audio, verify input-noise density, gain accuracy, output swing, and channel-to-channel matching against the manufacturer electrical characteristics.
Where can I buy LMR344F-GE2 and check its lead time?
Use the Request a Quote form on this page to request the LMR344F-GE2, current commercial terms, stock status, and lead time from XAIPART. The exact ROHM Semiconductor MPN is listed in a 14-SOP configuration, and the GE2 suffix identifies the specific orderable package. Confirm the requested quantity, packaging format, and delivery schedule when submitting the inquiry.
What is the price of LMR344F-GE2?
The current commercial price for LMR344F-GE2 is presented through the Request a Quote form on this page rather than as a static price statement. Submit the required quantity and shipment destination to obtain the applicable quotation, stock position, and delivery estimate. The exact orderable identifier is ROHM Semiconductor LMR344F-GE2 in the 14-SOP package.
Is LMR344F-GE2 in stock?
Current inventory for LMR344F-GE2 should be confirmed through the Request a Quote form on this page. The device is actively offered as the exact ROHM Semiconductor ordering option, but marketplace availability can change with factory production and replenishment. Include your required quantity and target date in the request to obtain a useful availability and lead-time response.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা LMR344F-GE2 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the LMR344F-GE2 when a design needs four low-voltage CMOS operational amplifiers in a 14-pin SOP package, especially for ground-referenced sensors, battery monitoring, portable instrumentation, or voice audio preamplification. Its rail-to-rail input and full-swing output behavior help maximize signal range between 2.7 V and 5.5 V supplies. The LMR344FJ-GE2 is the closest identified same-family alternative and offers a similar four-channel CMOS configuration, but its 14-SOPJ package designation requires land-pattern and pinout confirmation before substitution. If the design does not need four channels, a lower-channel-count amplifier may reduce cost, board area, and unused-channel power. Before finalizing the selection, verify offset voltage, input bias current, noise, bandwidth, slew rate, output-current capability, stability, and absolute maximum ratings in the manufacturer datasheet.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য LMR344FJ-GE2
Package 14-SOP 14-SOPJ
Brand ROHM Semiconductor ROHM Semiconductor
Amplifier Channels 4 4
Operating Supply Voltage 2.7 V to 5.5 V 2.7 V to 5.5 V

মূল পার্থক্যসমূহ

  • Four low-power amplifier channels in one package (বনামLMR344FJ-GE2)
  • Ground-referenced input architecture (বনামLMR344FJ-GE2)
  • Low-voltage operation with rail-to-rail signal handling (বনামLMR344FJ-GE2)

ডিজাইন নোট

Place the local supply-decoupling capacitor immediately between each supply pin and ground, with a short return path that does not share a long trace with the amplifier input. Keep each operational amplifier's feedback components adjacent to the associated pins, and route the non-inverting input away from clocks, switching regulators, inductors, and high-current return paths. The 14-pin SOP footprint should be created from the exact manufacturer land pattern rather than inferred from package width alone.

Check the selected closed-loop gain against the device's gain-bandwidth and phase-margin behavior. Rail-to-rail input and full-swing output describe voltage-range capability, but they do not guarantee equal bandwidth or phase margin near either supply rail. For sensor and audio signals, use short traces, guard grounded areas where appropriate, and maintain a stable feedback topology. Confirm capacitive-load tolerance before driving long cables, ADC inputs, or other high-capacitance nodes.

Calculate the amplifier's total supply demand for all four channels at the minimum intended load condition. The listed supply current is 32 mA per channel, so four active channels correspond to an estimated aggregate supply demand of 128 mA before considering other circuit loads. The regulator must support this current plus transient margin, and the power rail must remain within 2.7 V to 5.5 V at the device pins under worst-case supply and temperature conditions.

Do not infer a pin-compatible replacement solely from matching amplifier channel count, voltage rating, and package dimensions. The identified LMR344FJ-GE2 uses a 14-SOPJ listing while the target uses a 14-SOP designation; verify pin numbering, land pattern, exposed dimensions, electrical limits, and lead finish with the manufacturer documentation before substitution. Also follow the datasheet instructions for unused amplifier channels instead of allowing their inputs to float.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement appears in the manufacturer and distributor information for this exact MPN.

ডেটা যাচাই করা হয়েছে: 2026-11-20 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

LMR344F-GE2 datasheet LMR344F-GE2 pinout LMR344F-GE2 datasheet pdf LMR344F-GE2 equivalent LMR344F-GE2 replacement LMR344F-GE2 price LMR344F-GE2 stock ROHM LMR344F-GE2 LMR344F-GE2 14-SOP LMR344F-GE2 vs LMR344FJ-GE2 LMR344F-GE2 sensor amplifier LMR344F-GE2 battery monitoring LMR344F-GE2 low voltage op amp

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

ROHM Semiconductor LMR344F-GE2 LMR344FJ-GE2 LMR344F CMOS operational amplifier operational amplifier analog amplifier integrated circuit semiconductor rail-to-rail input full-swing output input ground sensing low supply current low input bias current 2.7 V to 5.5 V power supply 14-pin SOP SOP package family surface-mount package SMD sensor signal conditioning battery monitoring voice audio preamplifier portable instrumentation current sensing
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন