ROHM Semiconductor

LMR931G-GTR - 5V Low-Power Rail-to-Rail Op Amp | ROHM

MPN: LMR931G-GTR ✗ জীবনকালের সমাপ্তি
5 V Vdss 5 nA Id 5-pin SSOP Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

LMR931G-GTR সারাংশ

ROHM Semiconductor LMR931G-GTR is a single-channel, low-power operational amplifier characterized by rail-to-rail input and output operation and a 5 V supply. It is supplied in a 5-pin SSOP package with tape-and-reel ordering indicated by the GTR suffix. The device is positioned for compact, low-voltage analog signal-conditioning circuits where low supply current, wide input common-mode range, and full-swing output capability are important.

An operational amplifier, or op amp, is an analog integrated circuit that uses high-gain differential amplification to buffer, amplify, or condition signals. The LMR931G belongs to the broader hierarchy of operational amplifier, analog IC, and semiconductor products. Rail-to-rail input operation allows signals to approach the supply rails, while rail-to-rail output operation gives the output stage greater voltage range than a conventional output stage. These characteristics are particularly useful in battery-powered equipment and low-voltage sensor systems where signal headroom is limited.

ROHM describes the LMR931G family as a low-power, low-voltage, input/output full-swing operational amplifier. The verified product information identifies a single amplifier with one circuit, a 5 V nominal operating supply, and a 5-SSOP package. The family also includes single, dual, and quad configurations, allowing a system designer to standardize amplifier functions across channels without changing the basic low-power operating approach. Shutdown is specifically identified for the LMR981 and LMR982 family members rather than for the LMR931G.

The LMR931G-GTR is suited to low-voltage sensor interfaces, portable measurement systems, signal buffers, audio and communication support circuits, industrial controls, and general-purpose analog amplification. Its low-power operating concept can reduce system burden in applications where the amplifier does not need to operate continuously at high speed. Rail-to-rail input behavior can simplify biasing around midpoint, while full-swing output improves signal utilization at low supply voltages.

Designers should verify the electrical limits, common-mode range, output swing, stability requirements, and recommended external components in the ROHM datasheet before release. Decoupling capacitors should be placed close to the supply and ground pins, and feedback and compensation networks should preserve the intended closed-loop response. Input and output behavior must also be checked against source impedance, load impedance, and the operating voltage of the surrounding circuit.

This page combines the verified ROHM product information with package, application, comparison, and design guidance focused on practical selection. It identifies the LMR931G-GTR as a low-power, rail-to-rail single op amp and separates confirmed catalog facts from electrical parameters that require confirmation from the manufacturer datasheet.

এর জন্য ড্রপ-ইন বিকল্প LMR931G-GTR — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই পণ্যের জন্য কোনো ড্রপ-ইন বিকল্প পাওয়া যায়নি।

বিকল্প অনুরোধ করুন

LMR931G-GTR সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Product Type Operational Amplifier
Number of Channels 1 circuit
Amplifier Type General-purpose operational amplifier
Nominal Supply Voltage 5 V
Output Swing Input/output full swing
Rail-to-Rail Input Yes
Rail-to-Rail Output Yes
Input Bias Current 5 nA
Gain Bandwidth Product 1.4 MHz
Slew Rate 0.42 V/us
প্যাকেজ 5-pin SSOP
Packaging Tape and reel
মাউন্টিং টাইপ Surface mount
RoHS স্ট্যাটাস unknown
REACH Status unknown
AEC-Q100 Qualification unknown

LMR931G-GTR 5-pin ssop পিন কনফিগারেশন গাইড

LMR931G-GTR (5-pin ssop প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।

LMR931G-GTR-এর জন্য 5-pin ssop প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি LMR931G-GTR.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

LMR931G-GTR এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Low-Voltage Sensor Conditioning, Portable Measurement Systems, Audio Signal Buffering, Industrial Control Interfaces, Communications Support Circuit, Data Acquisition Front End.

🧩

Low-Voltage Sensor Conditioning

The LMR931G-GTR fits sensor-amplifier stages that operate from a nominal 5 V rail and need to process signals near either supply limit. Its rail-to-rail input behavior provides useful common-mode headroom, while the reported 5 nA input bias current helps reduce bias-related error with high-impedance sources. The 1.4 MHz gain-bandwidth product supports ordinary low-frequency conditioning rather than high-bandwidth sensing. Place the amplifier in a conventional noninverting or inverting configuration, keep feedback loops short, and verify source impedance, sensor range, and the datasheet stability requirements before committing the gain and compensation values.

📱

Portable Measurement Systems

Battery-powered instruments benefit from an operational amplifier that combines low-power operation with a nominal 5 V supply. The LMR931G-GTR can buffer sensor outputs, level-shift within the supply range, and drive moderate loads where the 1.4 MHz gain-bandwidth product and 0.42 V/us slew rate are adequate. Rail-to-rail output operation can maximize the available signal swing in compact systems. The design should account for shutdown behavior at the system level, avoid driving capacitive loads unless stability is confirmed, and use local supply bypassing to limit noise coupled into the measurement path.

🎧

Audio Signal Buffering

The LMR931G-GTR can serve as a low-voltage audio buffer when the source and destination operate within its nominal 5 V supply. Rail-to-rail input and output characteristics improve headroom in compact audio paths, while the 0.42 V/us slew rate is suitable for many low-bandwidth audio signals. Its 1.4 MHz gain-bandwidth product constrains high-order filtering and very high-frequency behavior. Confirm the output-load capability, output swing, noise, and stability in the manufacturer datasheet, and place the device so return currents from the audio path do not share sensitive input-ground routes.

🏭

Industrial Control Interfaces

LMR931G-GTR is suitable for general-purpose industrial interface stages that require a single low-power amplifier, nominal 5 V operation, and rail-to-rail signal handling. It can amplify or buffer low-bandwidth control signals and interface limited-range sensor outputs to a controller. The reported 5 nA input bias current is advantageous with high-impedance sources, but system-level EMI immunity and transient protection must be handled separately from the amplifier itself. Review the operating-temperature limits, supply tolerances, and input/output absolute maximum ratings before using the device in industrial equipment.

🌐

Communications Support Circuit

The LMR931G-GTR can be used in low-speed communications equipment for baseband buffering, thresholding, or gain stages when a nominal 5 V rail is available. Its 1.4 MHz bandwidth and 0.42 V/us slew rate are adequate for many low-rate support circuits but do not target high-speed line-driver applications. The single-channel 5-SSOP format also saves board area compared with a dual amplifier when only one channel is needed. Engineers should evaluate input capacitance, capacitive loading, output settling, and supply-noise behavior against the signal timing requirements of the communication standard.

🖥️

Data Acquisition Front End

LMR931G-GTR can provide the first active stage of a compact data-acquisition chain when signals require buffering, modest gain, and operation from a low-voltage supply. Rail-to-rail input operation supports sensor outputs near the supply rails, and the 1.4 MHz gain-bandwidth product can accommodate many slowly varying measurements. The amplifier should be selected only after checking input bias current, offset, noise, settling behavior, and common-mode limits against the required accuracy. Use short, shielded signal routes, a quiet reference node, and local bypass capacitors, especially when the source impedance is high.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

LMR931G-GTR ROHM Semiconductor ব্যবহৃত হয়: Low-Voltage Sensor Conditioning, Portable Measurement Systems, Audio Signal Buffering, Industrial Control Interfaces, Communications Support Circuit, Data Acquisition Front End LMR931G Base family member ব্যবহৃত হয়: Low-Voltage Sensor Conditioning, Portable Measurement Systems, Audio Signal Buffering, Industrial Control Interfaces, Communications Support Circuit, Data Acquisition Front End
What is the LMR931G-GTR?
The LMR931G-GTR is a single-channel, low-power operational amplifier from ROHM Semiconductor with rail-to-rail input and output operation and a nominal 5 V supply. According to the ROHM product page, the LMR931G family is intended for low-voltage, low-supply-current operation and includes single, dual, and quad amplifier configurations. The GTR ordering code denotes the tape-and-reel 5-pin SSOP version.
What package does LMR931G-GTR use?
The LMR931G-GTR is supplied in a 5-pin SSOP package. The product listing identifies the device as a one-circuit, rail-to-rail operational amplifier in the 5-SSOP configuration, while the GTR suffix identifies tape-and-reel ordering. Use the manufacturer pin-description table and package drawing to assign PCB land patterns and verify pin numbering before fabrication.
Is LMR931G-GTR rail-to-rail?
Yes, the LMR931G-GTR provides rail-to-rail input and output operation. ROHM describes the family as an input/output full-swing low-power operational amplifier for low-voltage operation. This feature supports a wider usable signal range in compact systems, although input offset, output swing, load capability, and common-mode limits must still be checked under the actual supply and load conditions.
What are the key specifications of LMR931G-GTR that engineers should know?
The LMR931G-GTR is a single, 5 V, low-power operational amplifier in a 5-pin SSOP package with rail-to-rail input and output operation. Catalog information also identifies 5 nA input bias current, 1.4 MHz gain-bandwidth product, and 0.42 V/us slew rate. These figures make it relevant to low-voltage sensor conditioning, buffering, and portable analog systems, subject to the complete operating limits in the ROHM datasheet.
Where can I download the LMR931G datasheet PDF?
The official LMR931G datasheet is linked from the ROHM product page at the datasheet URL on this page. The manufacturer product page identifies the family and its low-power, input/output full-swing operation. Use the ROHM datasheet for authoritative pin assignments, electrical characteristics, recommended application circuits, package dimensions, and ordering information.
Where can I find the LMR931G-GTR pinout?
The LMR931G-GTR pinout is defined by the pin-description table in the ROHM LMR931G datasheet. The verified catalog information confirms a 5-pin SSOP package, but it does not provide individual pin numbers or names. Use the package drawing and pin table together to identify supply, ground, input, and output connections before laying out or modifying a PCB.
What can replace the LMR931G-GTR?
A true drop-in replacement must use the same 5-pin SSOP footprint, preserve pin assignments, and remain compatible with the intended supply voltage, common-mode range, output swing, bandwidth, and load. The cross-reference search located generic comparison resources but did not establish a verified substitute MPN. A candidate should therefore be treated as a functional equivalent until its manufacturer datasheet and pinout have been compared.
Is the LMR931G-GTR the same as LMV931MF/NOPB?
No direct equivalence should be assumed. The LMR931G-GTR uses a 5-pin SSOP package, while LMV931MF/NOPB is identified in comparison results as a 5-pin SOT-23 device. Because the package and potentially the land pattern differ, LMV931MF/NOPB is not a drop-in replacement without a PCB change. Use the ROHM pinout as the reference for any replacement assessment.
What is the best ROHM equivalent for LMR931G-GTR?
No separate ROHM substitute was established by the available cross-reference results. The ROHM product family includes single, dual, and quad LMR931G configurations, but a dual or quad amplifier cannot automatically replace a single amplifier because the channel count, package pins, and circuit requirements differ. Select only an ordering variant with the same single-channel SSOP footprint and equivalent pin arrangement.
When should I choose LMR931G-GTR over another low-power op amp?
Choose the LMR931G-GTR when the design requires a single low-power amplifier operating from a nominal 5 V rail, rail-to-rail signal handling, and a 5-pin SSOP footprint. Its reported 1.4 MHz gain-bandwidth product and 0.42 V/us slew rate are sufficient for many sensing and buffering paths, but they are not appropriate for high-speed signal processing. Verify exact input bias, noise, offset, and stability requirements first.
Is LMR931G-GTR suitable for low-voltage sensor interfaces?
The LMR931G-GTR is well matched to many low-voltage sensor-interface circuits because it combines a nominal 5 V supply, rail-to-rail input and output behavior, low-power operation, and 5 nA input bias current. The 1.4 MHz gain-bandwidth product limits high-gain bandwidth and phase margin calculations. Confirm sensor source impedance, signal bandwidth, and the sensor output range before selecting the amplifier.
LMR931G-GTR vs LMV931MFX/NOPB: which is better for a new design?
The LMR931G-GTR is the better choice when an existing design specifically requires its 5-pin SSOP footprint and ROHM LMR931G electrical behavior. LMV931MFX/NOPB is identified as a 5-pin SOT-23 device, so it is not a drop-in choice for the same PCB. A new design may evaluate either package on merit, but it must include a new footprint and a complete electrical comparison.
How much current does LMR931G-GTR consume?
The LMR931G-GTR is explicitly classified by ROHM as a low-power operational amplifier, but a definitive supply-current value is not stated in the available product-page excerpt. Confirm the quiescent and loaded current in the manufacturer datasheet for the intended supply voltage and common-mode condition. That value is essential for battery-life estimates and thermal design.
Where can I buy LMR931G-GTR and check its lead time?
Use the Request a Quote form on this page to request LMR931G-GTR availability, current lead time, and order quantities. The form is the appropriate channel for a quote based on the exact LMR931G-GTR ordering code and tape-and-reel packaging. Confirm the manufacturer lifecycle status and any minimum-order constraints when placing the order.
What is the price of LMR931G-GTR?
Use the Request a Quote form on this page for the current unit price and quantity breaks for LMR931G-GTR. The available product pages do not print a qualifying quantity-break table for the exact MPN, so no static price tier is asserted here. Include your required quantity and packaging preference with the request to obtain an order-specific quotation.
Is LMR931G-GTR in stock?
Stock status for LMR931G-GTR should be requested through the Request a Quote form on this page. Distributor and aggregation pages may change independently, while the exact quantity and suffix matter for procurement. Request the current on-hand quantity, factory lead time, and scheduled delivery for LMR931G-GTR before committing the component to a production schedule.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা LMR931G-GTR — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the LMR931G-GTR for a compact, single-channel, nominal 5 V analog circuit that benefits from rail-to-rail input and output behavior, low-power operation, and a 5-pin SSOP footprint. It is particularly appropriate for slow sensor signals, buffering, modest gain stages, and portable equipment where the 1.4 MHz gain-bandwidth product and 0.42 V/us slew rate are adequate. Do not select it for high-speed signal processing, precision requirements exceeding its unconfirmed offset and noise limits, or loads outside the manufacturer specifications. LMV931MFX/NOPB and OPA343NA/250 appeared in comparison searches but were not established as same-footprint drop-ins. Any substitute must be checked for identical pin assignments, 5-pin SSOP geometry, supply range, common-mode range, output swing, bandwidth, slew rate, bias current, stability, and lifecycle requirements.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য
Brand ROHM Semiconductor
Package 5-pin SSOP
Number of Channels 1 circuit
Nominal Supply Voltage 5 V
Input Bias Current 5 nA
Gain Bandwidth Product 1.4 MHz
Slew Rate 0.42 V/us
Rail-to-Rail Input Yes
Rail-to-Rail Output Yes
Operating Class Low-power, low-voltage operational amplifier

মূল পার্থক্যসমূহ

  • Rail-to-rail signal handling in a low-power single-amplifier package (বনামLMV931MFX/NOPB)
  • Single-channel format avoids unused amplifier channels (বনামLMR931G dual configuration)
  • Low-voltage operation with useful input bias-current performance (বনামOPA343NA/250)

ডিজাইন নোট

Place the supply bypass capacitor and the amplifier ground connection close to the device pins. Route the feedback components directly from the output to the inverting input and keep the non-inverting input trace short, especially when the source impedance is high. Because the verified catalog information does not state the pin numbers, use the ROHM package drawing and pin-description table before assigning either power or signal nets.

Do not treat rail-to-rail operation as an unlimited range. The usable input and output span still depends on supply voltage, load, output swing, and common-mode limits in the manufacturer datasheet. The reported 1.4 MHz gain-bandwidth product also means that high closed-loop gain reduces available bandwidth. Validate the intended gain, signal bandwidth, and capacitive load before release rather than relying only on the nominal rail-to-rail description.

For high-impedance sources, minimize leakage and board contamination around the input node, and keep sensitive traces away from switching nodes and switching-regulator outputs. The 5 nA input bias-current figure makes source impedance important because bias-current error depends on the impedance seen by the input. Confirm whether the design also requires the amplifier's full noise and offset specifications, which should be read from the ROHM datasheet.

Power the LMR931G-GTR from a nominal 5 V rail only after checking its operating-supply range, quiescent current, and load behavior. Low-power operation does not remove the need for local decoupling because supply ripple and ground movement can still affect precision analog measurements. Where multiple analog and digital loads share a board, route amplifier return current directly to the quiet ground reference rather than through digital return paths.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The available product information does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 status is not stated; not_applicable here means automotive qualification was not established from the available information, not that the device is qualified or disqualified.

ডেটা যাচাই করা হয়েছে: 2026-11-20 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

LMR931G-GTR datasheet LMR931G-GTR pinout LMR931G-GTR datasheet pdf LMR931G-GTR equivalent LMR931G-GTR replacement LMR931G-GTR price LMR931G-GTR stock ROHM LMR931G-GTR LMR931G 5V op amp LMR931G SSOP-5 amplifier LMR931G low power op amp LMR931G rail-to-rail amplifier LMR931G-GTR vs LMV931MFX LMR931G-GTR sensor interface

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

ROHM Semiconductor LMR931G-GTR LMR931G LMR981 LMR982 LMV931MFX/NOPB OPA343NA/250 Operational Amplifier Low-Power Op Amp Rail-to-Rail Input Rail-to-Rail Output Input Bias Current Gain Bandwidth Product Slew Rate 5-pin SSOP SSOP Surface Mount Analog IC Semiconductor Low-Voltage Operation Sensor Conditioning Signal Buffering Data Acquisition 5 V Power Supply Tape and Reel
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন