NXP Semiconductors

LPC11E67JBD48E - 50MHz Cortex-M0+ MCU | NXP

MPN: LPC11E67JBD48E ✓ সক্রিয়
48-LQFP (7 mm x 7 mm) Package 50 MHz Speed 128 KB (128K x 8 bits) Memory
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

LPC11E67JBD48E সারাংশ

NXP Semiconductors LPC11E67JBD48E is a 32-bit Arm Cortex-M0+ microcontroller in the LPC11Exx family, operating at up to 50 MHz with 128 KB of flash memory in a 48-LQFP package measuring 7 mm by 7 mm. The part is listed as active, providing a compact platform for cost-sensitive embedded control, sensor acquisition, actuator control, and connected industrial equipment.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The Cortex-M0+ architecture belongs to the Arm microcontroller hierarchy and is designed for efficient, low-complexity control applications. NXP describes the LPC11Exx family as a low-cost 32-bit MCU family intended to replace 8-bit and 16-bit architectures while reducing code size through its efficient instruction set. The LPC11E67JBD48E therefore combines familiar microcontroller operation with a 32-bit processing architecture and a 50 MHz clock capability.

The three defining parameters are a maximum CPU frequency of 50 MHz, 128 KB of flash memory organized as 128K by 8 bits, and a 48-LQFP package with a 7 mm by 7 mm body. Its ARM Cortex-M0+ core supports embedded software workflows that require deterministic control, peripheral integration, and moderate arithmetic performance. The 128 KB program-memory region is suitable for firmware, configuration handling, and application logic in compact industrial, consumer, and embedded-control products.

The LPC11Exx positioning emphasizes a simple instruction set and code efficiency rather than high-end application-processing performance. That balance makes the LPC11E67JBD48E appropriate for controllers that repeatedly perform sensing, control, communications, and local supervision. At 50 MHz, the device provides additional timing headroom for interrupt-driven and mixed-control workloads while retaining the resource profile associated with an entry-level 32-bit MCU.

Typical uses include building automation controls, temperature and environmental monitoring, small motor-control subsystems, industrial sensor hubs, appliance controllers, and low-cost connected peripherals. The 48-LQFP package exposes more pins than a minimal small-outline package, making the device suitable for designs that need a balance of peripheral access, compact board area, and assembly cost. Pin assignment and peripheral multiplexing must be checked against the manufacturer pin description and device data sheet before PCB routing.

The principal design consideration is to verify the complete pin configuration, supported voltage range, clock setup, and peripheral assignments in the manufacturer documentation. Because this MCU family is intended for broad embedded use, firmware partitioning, watchdog behavior, reset handling, and low-power transitions should be established early. Decoupling, programming access, clock jitter, and unused-pin handling also need to follow the device's recommended hardware guidelines.

This product page combines the NXP family positioning, distributor package and memory details, an exact-package replacement check, application guidance, and engineering-focused design notes. These resources help engineers evaluate the LPC11E67JBD48E before committing a compact control board to the LPC11Exx architecture.

এর জন্য ড্রপ-ইন বিকল্প LPC11E67JBD48E — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible LPC11E67JBD48E (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Product Type, Architecture, Flash Memory, SRAM.

NXP Semiconductors
Package: 48-LQFP (7x7 mm)
Product Type: 32-bit ARM Microcontroller (MCU)
SRAM: 12 KB
এর সাথে তুলনা করুন LPC11E67JBD48E →
NXP Semiconductors
Package: 48-LQFP (7 x 7 mm)
Product Type: 32-bit ARM Cortex-M0+ microcontroller
এর সাথে তুলনা করুন LPC11E67JBD48E →
NXP Semiconductors
Package: 48-LQFP (7x7 mm)
Product Type: 32-bit ARM Cortex-M0+ microcontroller
Architecture: ARM Cortex-M0+
এর সাথে তুলনা করুন LPC11E67JBD48E →

LPC11E67JBD48K

✅ ড্রপ-ইন
NXP Semiconductors
📦 48-LQFP (7 mm x 7 mm)
32-bit ARM Cortex-M0+ microcontroller · NXP Semiconductors · Arm Cortex-M0+ · 32-bit · 50 MHz · 128 KB (128K x 8) · 48-LQFP (7 x 7 mm) · Surface mount

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

LPC11E67JBD48E সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Product Type 32-bit microcontroller (MCU)
CPU Core Arm Cortex-M0+
Maximum CPU Frequency 50 MHz
Flash Memory 128 KB (128K x 8 bits)
Word Organization 128K x 8 bits
প্যাকেজ 48-LQFP (7 mm x 7 mm)
Architecture 32-bit
Core Family LPC11Exx
Programmable Architecture Arm Cortex-M0+ / Cortex-M0 family
Product Status Active
মাউন্টিং টাইপ Surface mount
Supplier NXP USA Inc.

LPC11E67JBD48E 48-lqfp (7 mm x 7 mm) পিন কনফিগারেশন গাইড

LPC11E67JBD48E (48-lqfp (7 mm x 7 mm) প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

LPC11E67JBD48E-এর জন্য 48-lqfp (7 mm x 7 mm) প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি LPC11E67JBD48E.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

LPC11E67JBD48E এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Building Automation Controllers, Environmental Sensor Monitoring, Appliance and Equipment Control, Small Motor and Actuator Control, Industrial Sensor Hubs, Low-Cost Connected Peripherals.

🏭

Building Automation Controllers

The NXP LPC11E67JBD48E fits compact building-automation controllers because its Arm Cortex-M0+ core operates at up to 50 MHz while providing 128 KB of flash for control logic, configuration data, and communication routines. The 48-LQFP package offers a practical balance of PCB area and pin access for reading sensors, driving discrete outputs, and supervising relays or actuators. Its 32-bit architecture is appropriate for logic that has outgrown an 8-bit controller but does not require a high-end processor. Before schematic release, verify the required timer channels, serial interfaces, operating voltage, and temperature grade in the NXP device documentation.

🧩

Environmental Sensor Monitoring

The LPC11E67JBD48E can serve as the local controller in an environmental monitoring system that combines temperature, humidity, air-quality, or occupancy sensing with periodic status reporting. Its 50 MHz Cortex-M0+ core provides timing headroom for interrupt-driven sampling and control tasks, while 128 KB of flash accommodates firmware, calibration constants, and communication handlers. The 48-LQFP package is especially useful when a design needs more external connections than a minimal MCU package can provide. Confirm the exact ADC, timer, serial-interface, and low-power requirements against the LPC11Exx data sheet before assigning sensor channels.

🔧

Appliance and Equipment Control

For appliance and equipment-control products, the LPC11E67JBD48E combines a 32-bit control core, 50 MHz operation, and 128 KB of program memory in a compact 48-LQFP package. These characteristics support state-machine logic, button and keypad handling, motor or valve sequencing, sensor conditioning, and communications supervision. The LPC11Exx family's emphasis on code efficiency makes it relevant to designs replacing 8-bit or 16-bit controllers while limiting firmware growth. Engineers should verify pin multiplexing, watchdog behavior, brownout behavior, supply limits, and package-level programming access before freezing the production design.

⚡

Small Motor and Actuator Control

The NXP LPC11E67JBD48E is applicable to small motor, valve, and actuator control subsystems where a microcontroller must coordinate timing inputs, position sensing, and output sequencing. Its Cortex-M0+ architecture operates at up to 50 MHz, providing useful processing margin for interrupt-based control loops, while 128 KB of flash stores motion tables and supervisory logic. The 48-LQFP package can simplify routing when a design requires multiple timer outputs and control signals. Validate the exact PWM resources, capture channels, pin assignments, voltage levels, and any required isolation or driver components in the manufacturer documentation.

🌐

Industrial Sensor Hubs

The LPC11E67JBD48E can function as a low-cost sensor hub that gathers readings from multiple discrete sensors and presents the result through a local serial or network interface. Its 32-bit Cortex-M0+ core supports up to 50 MHz operation for simultaneous interrupt servicing and protocol handling, and 128 KB of flash is suitable for firmware plus field configuration. A 48-LQFP package provides a practical number of connections for sensor inputs, status indicators, and communications. The design should confirm which UART, SPI, I2C, timer, and comparison resources are present on the exact LPC11E67JBD48E variant.

📱

Low-Cost Connected Peripherals

The LPC11E67JBD48E suits low-cost connected peripherals that need local control, protocol handling, and nonvolatile firmware storage without a high-performance application processor. The 50 MHz Cortex-M0+ core can manage interrupts and protocol tasks, while 128 KB of flash provides room for application firmware and configuration. Its 48-LQFP package is appropriate when designers need a compact solution with more external pins than a small-outline MCU provides. For a wireless or wired peripheral, check the specific communication peripheral requirements, supported I/O voltage, clock accuracy, and board-level antenna or transceiver implementation against the device documentation.

What is the LPC11E67JBD48E?
The LPC11E67JBD48E is an active 32-bit Arm Cortex-M0+ microcontroller from NXP Semiconductors, operating at up to 50 MHz with 128 KB of flash memory. According to the NXP LPC11Exx product information, the device is intended for cost-sensitive embedded-control designs that benefit from a 32-bit architecture, an efficient instruction set, and a compact 48-LQFP package measuring 7 mm by 7 mm.
What are the key specifications of LPC11E67JBD48E that engineers should know?
The key specifications of the LPC11E67JBD48E are a 32-bit Arm Cortex-M0+ core, a maximum CPU frequency of 50 MHz, and 128 KB of flash memory organized as 128K by 8 bits. The device is packaged in a 48-LQFP with a 7 mm by 7 mm body. NXP positions the LPC11Exx family as a low-cost 32-bit MCU family designed for 8-bit and 16-bit replacement applications with reduced code size.
Where can I download the LPC11E67JBD48E datasheet PDF?
The LPC11E67JBD48E datasheet and product information are available from the official NXP product page at https://www.nxp.com/part/LPC11E67JBD48. The NXP page provides the manufacturer's data-sheet link, package and ordering information, lifecycle information, and device documentation. Use that manufacturer source to verify pin functions, electrical limits, memory organization, clock requirements, and programming details before finalizing a design.
Where can I find the LPC11E67JBD48E pinout?
The LPC11E67JBD48E pinout should be obtained from the NXP LPC11Exx device data sheet and the official LPC11E67JBD48 product page. The package is a 48-LQFP with a 7 mm by 7 mm body. Use the manufacturer pin-description table when assigning multiplexing options, power pins, clock inputs, programming signals, ground connections, and I/O functions, because peripheral functions can vary by pin and device variant.
What is the operating voltage of the LPC11E67JBD48E?
The operating voltage range is not stated on the cited NXP product summary, so it must be confirmed in the manufacturer's LPC11Exx data sheet before use. The confirmed device attributes are an Arm Cortex-M0+ core, operation up to 50 MHz, 128 KB of flash memory, and a 48-LQFP package. Do not infer supply limits from a related family member because package suffixes can correspond to different ordering options or device variants.
Is the LPC11E67JBD48E suitable for industrial control systems?
The LPC11E67JBD48E is suitable for many industrial-control tasks when its confirmed 50 MHz Cortex-M0+ performance, 128 KB flash memory, and 48-LQFP interface count meet the design requirements. The NXP LPC11Exx family is specifically positioned as a low-cost 32-bit family for replacing 8-bit and 16-bit controller architectures. Confirm voltage tolerance, temperature grade, peripheral availability, and regulatory requirements in the device documentation.
What can replace the LPC11E67JBD48E?
A true drop-in replacement must preserve the 48-LQFP footprint, pin functions, 50 MHz-class CPU operation, 128 KB flash configuration, and required peripheral functions. The NXP LPC11E67JBD48 ordering designation is the closest same-family option, but a non-E orderable variant must still be checked for temperature-grade and packing-code differences. No cross-brand part has been established as a pin-to-pin replacement without device-level verification.
Is LPC11E67JBD48E the same as LPC11E67JBD48?
The LPC11E67JBD48E and LPC11E67JBD48 designations identify closely related NXP LPC11Exx devices, but the trailing E must not be ignored when ordering. Both are associated with the same family and device platform; however, suffix handling can distinguish orderable versions such as temperature grade or packing. Verify the package drawing, temperature range, tape-and-reel or tray format, and exact ordering information before treating one as a replacement for the other.
When should I choose the LPC11E67JBD48E instead of a larger microcontroller?
Choose the LPC11E67JBD48E when the design needs the processing capacity of a 32-bit Cortex-M0+ core, operation up to 50 MHz, and 128 KB of flash without requiring the memory, I/O, or processing resources of a larger MCU. Its LPC11Exx positioning emphasizes code efficiency and economical control. Choose a larger device when the design exceeds 128 KB of program memory or needs additional RAM, pins, communication peripherals, or greater real-time processing capacity.
Is the LPC11E67JBD48E suitable for sensor monitoring and acquisition systems?
The LPC11E67JBD48E is suitable for compact sensor-monitoring systems that benefit from a 32-bit control core, a 50 MHz clock, and 128 KB of firmware storage. These resources support interrupt-driven sampling, local filtering, calibration logic, and status reporting. Confirm the required ADC, timer, serial interface, operating voltage, and environmental limits in the NXP documentation before assigning acquisition channels or defining production test procedures.
LPC11E67JBD48E vs LPC1115FBD48/303 - which is better?
The LPC11E67JBD48E is the better-defined choice when a design specifically requires the LPC11Exx platform with an Arm Cortex-M0+ core, operation up to 50 MHz, and 128 KB of flash in a 48-LQFP package. The LPC1115FBD48/303 comparison candidate belongs to a different NXP device family and cannot be assumed pin-compatible. Review clock, memory, peripheral, and package differences before considering any redesign.
What is the best NXP equivalent for LPC11E67JBD48E?
The closest NXP-family candidate is LPC11E67JBD48 because it shares the LPC11Exx platform identity and is identified in the manufacturer search result. It remains a same-family candidate rather than an automatically approved substitute. Confirm that its temperature range, flash configuration, pin multiplexing, clock behavior, peripheral set, and delivery format match the LPC11E67JBD48E before using it as a drop-in replacement.
Can LPC11E67JBD48E replace a smaller 8-bit or 16-bit microcontroller?
The LPC11E67JBD48E can replace an 8-bit or 16-bit controller when the application can accommodate the 48-LQFP footprint and the firmware can be ported to the Arm Cortex-M0+ architecture. NXP describes the LPC11Exx family as a low-cost 32-bit platform intended to reduce code size compared with existing 8-bit and 16-bit architectures. Migration still requires peripheral, timing, interrupt, memory-map, and pin-assignment review.
Where to buy LPC11E67JBD48E online?
Use the Request a Quote form on this page to request the LPC11E67JBD48E with the required quantity, delivery date, and packaging format. The manufacturer identifies the device as active, and multiple sourcing channels list the exact orderable MPN, but current inventory and order commitments can change. Submit the desired quantity through the quote form so the current commercial response can reflect the requested configuration.
What is the price of LPC11E67JBD48E?
The current unit price is returned through the Request a Quote form on this page rather than embedded as a static figure. Pricing can vary with quantity, order value, delivery timing, and requested packaging or orderable suffix. Enter the required LPC11E67JBD48E quantity and commercial terms in the quote request so the response reflects current channel pricing and availability.
What is the lead time for LPC11E67JBD48E, and is it in stock?
The confirmed NXP product status is active, but a production lead time and guaranteed inventory quantity must be obtained through the Request a Quote form on this page. The exact MPN is LPC11E67JBD48E, so the request should state that full suffix and the required quantity. A sourcing confirmation should cover stock, lead time, shipment origin, and packaging without relying on a family-level availability statement.
Does the LPC11E67JBD48E support RoHS and REACH compliance?
RoHS and REACH status must be confirmed for the exact LPC11E67JBD48E orderable MPN through the manufacturer documentation or a current compliance statement. The product information identifies the device as active but does not provide the exact compliance declarations in its visible summary. Do not assume compliance for a related LPC11Exx order code, because environmental declarations can vary by exact part number and document revision.
What programming and development tools are compatible with LPC11E67JBD48E?
Programming compatibility depends on the NXP Cortex-M0+ debug and flash-programming solution selected for the LPC11Exx device. The confirmed target attributes are a 32-bit Arm Cortex-M0+ core, 50 MHz maximum operating frequency, and 128 KB of flash memory. Select a debugger and programming adapter that support the exact LPC11E67JBD48E family, its package pins, and required clock and reset behavior, then confirm the supported device list in the tool vendor's release notes.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা LPC11E67JBD48E — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the LPC11E67JBD48E when the design specifically calls for an active NXP LPC11Exx controller with an Arm Cortex-M0+ core, operation up to 50 MHz, and 128 KB of flash in a 48-LQFP package. It is well matched to building controls, sensor hubs, appliance controllers, and compact equipment-control modules that are transitioning from 8-bit or 16-bit architectures. LPC11E67JBD48 is the closest same-family ordering candidate, but engineers should confirm temperature grade, packing, and full ordering information before treating it as a substitute. A larger microcontroller is preferable when 128 KB of flash is insufficient or when the application requires more RAM, I/O, communication channels, or processing performance. A smaller MCU should be considered when the 48-LQFP footprint and 50 MHz capability are unnecessary. For any cross-brand migration, treat the change as a redesign until pin functions, clocking, memory, peripherals, voltage limits, and software support have been compared directly.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য LPC11E67JBD48
Brand NXP Semiconductors NXP Semiconductors
Package 48-LQFP (7 mm x 7 mm) 48-LQFP (7 mm x 7 mm)
Product Type 32-bit microcontroller 32-bit microcontroller
CPU Core Arm Cortex-M0+ Arm Cortex-M0+
Maximum CPU Frequency 50 MHz 50 MHz
Flash Memory 128 KB (128K x 8 bits) 128 KB (128K x 8 bits)
Architecture 32-bit 32-bit
Lifecycle Status Active Active
Ordering Suffix E No trailing E

মূল পার্থক্যসমূহ

  • Exact active orderable designation (বনামLPC11E67JBD48)
  • 50 MHz 32-bit control performance (বনামLPC11E67JBD48)
  • 128 KB flash organization (বনামLPC11E67JBD48)
  • Compact 48-LQFP footprint (বনামLPC11E67JBD48)

ডিজাইন নোট

Place the LPC11E67JBD48E power pins and decoupling components according to the NXP hardware-design guidance. A 48-LQFP footprint requires careful escape routing between the 0.5 mm pitch leads, so use the manufacturer land pattern rather than a generic LQFP drawing. Confirm that every supply and ground pin is connected, route clock inputs away from switching nodes, and preserve access to the programming and reset signals for production programming and recovery.

Define the complete power tree before assigning I/O levels. The cited product summary confirms the Cortex-M0+ core, 50 MHz maximum frequency, and 128 KB flash but does not state the operating voltage range, so that value must come from the manufacturer data sheet. Use the confirmed limits when selecting the regulator, level shifters, pull resistors, and connected peripherals. Also verify absolute maximum and I/O voltage restrictions separately from the normal operating range.

The LPC11Exx family supports an efficient instruction set and code size for 8-bit and 16-bit control replacements, but the physical design still requires disciplined signal routing. Keep the 50 MHz clock path short, isolate it from motor-control and relay outputs, provide a stable reset path, and maintain continuous ground-plane continuity beneath the device. If communication interfaces share a connector or switching node, review return paths and crosstalk before release.

Do not assume that every LPC11Exx order code is interchangeable with LPC11E67JBD48E. The trailing E is part of the exact orderable designation and can encode ordering information, including temperature grade or delivery format. Before substitution, compare the full ordering table, package drawing, flash organization, RAM, peripheral set, pin multiplexing, and absolute maximum ratings. Also avoid using the closest family member as a cross-brand replacement without a verified pin-to-pin comparison.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The manufacturer product summary identifies the LPC11E67JBD48E as active but does not state exact RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations. Compliance must be confirmed for the complete orderable MPN. AEC-Q100 qualification is not indicated for this general-purpose microcontroller.

ডেটা যাচাই করা হয়েছে: 2026-11-10 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

LPC11E67JBD48E datasheet LPC11E67JBD48E pinout LPC11E67JBD48E datasheet pdf LPC11E67JBD48E specifications LPC11E67JBD48E 50MHz LPC11E67JBD48E 128KB flash LPC11E67JBD48E 48-LQFP NXP LPC11E67JBD48E LPC11E67JBD48E equivalent LPC11E67JBD48E replacement LPC11E67JBD48E vs LPC11E67JBD48 LPC11E67JBD48E price LPC11E67JBD48E stock LPC11E67JBD48E lead time LPC11E67JBD48E microcontroller application

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

NXP Semiconductors LPC11E67JBD48E LPC11E67JBD48 LPC11Exx Arm Cortex-M0+ Arm Cortex-M0 32-bit microcontroller embedded controller microcontroller unit MCU flash memory 50 MHz 128 KB flash 48-LQFP LQFP package surface-mount package 7 mm by 7 mm package industrial control sensor monitoring appliance control motor control building automation industrial sensor hub low-power control firmware
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন