LPC11E67JBD48E - 50MHz Cortex-M0+ MCU | NXP
MPN: LPC11E67JBD48E ✓ AktifLPC11E67JBD48E Ringkasan
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The Cortex-M0+ architecture belongs to the Arm microcontroller hierarchy and is designed for efficient, low-complexity control applications. NXP describes the LPC11Exx family as a low-cost 32-bit MCU family intended to replace 8-bit and 16-bit architectures while reducing code size through its efficient instruction set. The LPC11E67JBD48E therefore combines familiar microcontroller operation with a 32-bit processing architecture and a 50 MHz clock capability.
The three defining parameters are a maximum CPU frequency of 50 MHz, 128 KB of flash memory organized as 128K by 8 bits, and a 48-LQFP package with a 7 mm by 7 mm body. Its ARM Cortex-M0+ core supports embedded software workflows that require deterministic control, peripheral integration, and moderate arithmetic performance. The 128 KB program-memory region is suitable for firmware, configuration handling, and application logic in compact industrial, consumer, and embedded-control products.
The LPC11Exx positioning emphasizes a simple instruction set and code efficiency rather than high-end application-processing performance. That balance makes the LPC11E67JBD48E appropriate for controllers that repeatedly perform sensing, control, communications, and local supervision. At 50 MHz, the device provides additional timing headroom for interrupt-driven and mixed-control workloads while retaining the resource profile associated with an entry-level 32-bit MCU.
Typical uses include building automation controls, temperature and environmental monitoring, small motor-control subsystems, industrial sensor hubs, appliance controllers, and low-cost connected peripherals. The 48-LQFP package exposes more pins than a minimal small-outline package, making the device suitable for designs that need a balance of peripheral access, compact board area, and assembly cost. Pin assignment and peripheral multiplexing must be checked against the manufacturer pin description and device data sheet before PCB routing.
The principal design consideration is to verify the complete pin configuration, supported voltage range, clock setup, and peripheral assignments in the manufacturer documentation. Because this MCU family is intended for broad embedded use, firmware partitioning, watchdog behavior, reset handling, and low-power transitions should be established early. Decoupling, programming access, clock jitter, and unused-pin handling also need to follow the device's recommended hardware guidelines.
This product page combines the NXP family positioning, distributor package and memory details, an exact-package replacement check, application guidance, and engineering-focused design notes. These resources help engineers evaluate the LPC11E67JBD48E before committing a compact control board to the LPC11Exx architecture.
Pilihan pengganti yang segera untuk LPC11E67JBD48E — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera LPC11E67JBD48E (sama faktor bentuk dan kaki) — berbeza dalam Package, Product Type, Architecture, Flash Memory, SRAM.
LPC11E67JBD48K
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →LPC11E67JBD48E Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 32-bit microcontroller (MCU) |
| CPU Core | Arm Cortex-M0+ |
| Maximum CPU Frequency | 50 MHz |
| Flash Memory | 128 KB (128K x 8 bits) |
| Word Organization | 128K x 8 bits |
| Kemasan | 48-LQFP (7 mm x 7 mm) |
| Architecture | 32-bit |
| Core Family | LPC11Exx |
| Programmable Architecture | Arm Cortex-M0+ / Cortex-M0 family |
| Product Status | Active |
| Jenis Pemasangan | Surface mount |
| Supplier | NXP USA Inc. |
Panduan Konfigurasi Pin LPC11E67JBD48E 48-lqfp (7 mm x 7 mm)
Konfigurasi pin untuk LPC11E67JBD48E (48-lqfp (7 mm x 7 mm) pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk LPC11E67JBD48E.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
LPC11E67JBD48E patut untuk 6 aplikasis: Building Automation Controllers, Environmental Sensor Monitoring, Appliance and Equipment Control, Small Motor and Actuator Control, Industrial Sensor Hubs, Low-Cost Connected Peripherals.
Building Automation Controllers
The NXP LPC11E67JBD48E fits compact building-automation controllers because its Arm Cortex-M0+ core operates at up to 50 MHz while providing 128 KB of flash for control logic, configuration data, and communication routines. The 48-LQFP package offers a practical balance of PCB area and pin access for reading sensors, driving discrete outputs, and supervising relays or actuators. Its 32-bit architecture is appropriate for logic that has outgrown an 8-bit controller but does not require a high-end processor. Before schematic release, verify the required timer channels, serial interfaces, operating voltage, and temperature grade in the NXP device documentation.
Environmental Sensor Monitoring
The LPC11E67JBD48E can serve as the local controller in an environmental monitoring system that combines temperature, humidity, air-quality, or occupancy sensing with periodic status reporting. Its 50 MHz Cortex-M0+ core provides timing headroom for interrupt-driven sampling and control tasks, while 128 KB of flash accommodates firmware, calibration constants, and communication handlers. The 48-LQFP package is especially useful when a design needs more external connections than a minimal MCU package can provide. Confirm the exact ADC, timer, serial-interface, and low-power requirements against the LPC11Exx data sheet before assigning sensor channels.
Appliance and Equipment Control
For appliance and equipment-control products, the LPC11E67JBD48E combines a 32-bit control core, 50 MHz operation, and 128 KB of program memory in a compact 48-LQFP package. These characteristics support state-machine logic, button and keypad handling, motor or valve sequencing, sensor conditioning, and communications supervision. The LPC11Exx family's emphasis on code efficiency makes it relevant to designs replacing 8-bit or 16-bit controllers while limiting firmware growth. Engineers should verify pin multiplexing, watchdog behavior, brownout behavior, supply limits, and package-level programming access before freezing the production design.
Small Motor and Actuator Control
The NXP LPC11E67JBD48E is applicable to small motor, valve, and actuator control subsystems where a microcontroller must coordinate timing inputs, position sensing, and output sequencing. Its Cortex-M0+ architecture operates at up to 50 MHz, providing useful processing margin for interrupt-based control loops, while 128 KB of flash stores motion tables and supervisory logic. The 48-LQFP package can simplify routing when a design requires multiple timer outputs and control signals. Validate the exact PWM resources, capture channels, pin assignments, voltage levels, and any required isolation or driver components in the manufacturer documentation.
Industrial Sensor Hubs
The LPC11E67JBD48E can function as a low-cost sensor hub that gathers readings from multiple discrete sensors and presents the result through a local serial or network interface. Its 32-bit Cortex-M0+ core supports up to 50 MHz operation for simultaneous interrupt servicing and protocol handling, and 128 KB of flash is suitable for firmware plus field configuration. A 48-LQFP package provides a practical number of connections for sensor inputs, status indicators, and communications. The design should confirm which UART, SPI, I2C, timer, and comparison resources are present on the exact LPC11E67JBD48E variant.
Low-Cost Connected Peripherals
The LPC11E67JBD48E suits low-cost connected peripherals that need local control, protocol handling, and nonvolatile firmware storage without a high-performance application processor. The 50 MHz Cortex-M0+ core can manage interrupts and protocol tasks, while 128 KB of flash provides room for application firmware and configuration. Its 48-LQFP package is appropriate when designers need a compact solution with more external pins than a small-outline MCU provides. For a wireless or wired peripheral, check the specific communication peripheral requirements, supported I/O voltage, clock accuracy, and board-level antenna or transceiver implementation against the device documentation.
Data referensi kejuruteraan untuk LPC11E67JBD48E — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | LPC11E67JBD48 |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Package | 48-LQFP (7 mm x 7 mm) | 48-LQFP (7 mm x 7 mm) |
| Product Type | 32-bit microcontroller | 32-bit microcontroller |
| CPU Core | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 50 MHz | 50 MHz |
| Flash Memory | 128 KB (128K x 8 bits) | 128 KB (128K x 8 bits) |
| Architecture | 32-bit | 32-bit |
| Lifecycle Status | Active | Active |
| Ordering Suffix | E | No trailing E |
Penyeberangsung Jelas
- Exact active orderable designation (vsLPC11E67JBD48)
- 50 MHz 32-bit control performance (vsLPC11E67JBD48)
- 128 KB flash organization (vsLPC11E67JBD48)
- Compact 48-LQFP footprint (vsLPC11E67JBD48)
Catatan Desain
Place the LPC11E67JBD48E power pins and decoupling components according to the NXP hardware-design guidance. A 48-LQFP footprint requires careful escape routing between the 0.5 mm pitch leads, so use the manufacturer land pattern rather than a generic LQFP drawing. Confirm that every supply and ground pin is connected, route clock inputs away from switching nodes, and preserve access to the programming and reset signals for production programming and recovery.
Define the complete power tree before assigning I/O levels. The cited product summary confirms the Cortex-M0+ core, 50 MHz maximum frequency, and 128 KB flash but does not state the operating voltage range, so that value must come from the manufacturer data sheet. Use the confirmed limits when selecting the regulator, level shifters, pull resistors, and connected peripherals. Also verify absolute maximum and I/O voltage restrictions separately from the normal operating range.
The LPC11Exx family supports an efficient instruction set and code size for 8-bit and 16-bit control replacements, but the physical design still requires disciplined signal routing. Keep the 50 MHz clock path short, isolate it from motor-control and relay outputs, provide a stable reset path, and maintain continuous ground-plane continuity beneath the device. If communication interfaces share a connector or switching node, review return paths and crosstalk before release.
Do not assume that every LPC11Exx order code is interchangeable with LPC11E67JBD48E. The trailing E is part of the exact orderable designation and can encode ordering information, including temperature grade or delivery format. Before substitution, compare the full ordering table, package drawing, flash organization, RAM, peripheral set, pin multiplexing, and absolute maximum ratings. Also avoid using the closest family member as a cross-brand replacement without a verified pin-to-pin comparison.
Maklumat Kesediaan
The manufacturer product summary identifies the LPC11E67JBD48E as active but does not state exact RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations. Compliance must be confirmed for the complete orderable MPN. AEC-Q100 qualification is not indicated for this general-purpose microcontroller.