M2GL005-VFG400I - 6060-Cell IGLOO2 FPGA | Microchip
MPN: M2GL005-VFG400I ✓ সক্রিয়M2GL005-VFG400I সারাংশ
An FPGA is a programmable digital semiconductor whose logic, interconnect, and I/O resources can be configured after manufacture. A field-programmable gate array belongs to the broader logic-device hierarchy and semiconductor category. Unlike a fixed-function application-specific integrated circuit, an FPGA can be reprogrammed for evolving interfaces, logic revisions, and product variants. Microchip positions the IGLOO2 family for low-power, cost-sensitive embedded systems requiring flexible hardware and compact implementations.
The M2GL005-VFG400I combines 6,060 logic cells with a 400-pin package and on-chip flash configuration. Its 171 I/O resources make the device useful when a design needs numerous external connections relative to the available logic capacity. The 1.2 V operating supply supports integration with compatible low-voltage digital systems. Because configuration data is stored in flash, the device can retain its programmed configuration without requiring a separate configuration loader after power is restored.
The IGLOO2 architecture is designed for general-purpose programmable logic rather than application-specific signal processing. This makes it appropriate for protocol interfaces, bridge functions, input/output expansion, data acquisition control, and ancillary control logic surrounding a processor or microcontroller. Its 400-LFBGA land pattern also provides a high pin count for designs requiring extensive parallel connectivity.
Typical deployments include industrial monitoring, communications equipment, consumer electronics, embedded control systems, and interface adapters. In these systems, designers can use programmable logic to consolidate multiple interface functions, implement timing and protocol conversion, or isolate slower peripheral logic from the host processor. The large package is advantageous for high-I/O designs but requires careful escape routing and board-level thermal validation.
When assigning PCB resources, use the Microchip IGLOO 2 FPGA Packaging and Pin Descriptions User Guide to confirm every ball assignment, power location, and I/O standard. Validate each interface against its voltage domain and timing constraints before fabrication. The programming toolchain, configuration device, and board test strategy must also be evaluated as one complete design flow.
This product analysis combines the manufacturer device information, package characteristics, sourcing context, replacement screening, and practical implementation guidance. It is intended to help engineers identify the correct IGLOO2 density and package before completing FPGA placement, routing, power, and configuration decisions.
এর জন্য ড্রপ-ইন বিকল্প M2GL005-VFG400I — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible M2GL005-VFG400I (একই form factor এবং footprint) — পার্থক্য রয়েছে Device Type, Configuration Memory, Programmable Logic Type, Logic Cells, Package.
M2GL005-VF400I
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →M2GL005-VFG400
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়মূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →M2GL005-1VFG400I
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
M2GL005-VFG400I সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Device Type | IGLOO2 low-density FPGA |
| Logic Cells | 6,060 cells |
| Core Supply Voltage | 1.2 V |
| I/O Count | 171 I/O |
| প্যাকেজ | 400-LFBGA |
| Package Pin Count | 400 pins |
| Configuration Memory | On-chip flash |
| Embedded SRAM | 32 KB |
| Direct Memory Access Controllers | Multiple DMA controllers |
| Programmable Logic Type | Field-programmable gate array |
| Manufacturer | Microchip Technology |
| Product Family | IGLOO2 |
| মাউন্টিং টাইপ | Surface mount |
| Package Family | LFBGA family |
| Temperature Grade | Industrial |
M2GL005-VFG400I lfbga family পিন কনফিগারেশন গাইড
M2GL005-VFG400I (lfbga family প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি M2GL005-VFG400I.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
M2GL005-VFG400I এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Monitoring and Control, Communications Interface Bridging, Data Acquisition Front End, Embedded System I/O Expansion, Secure Connectivity and Authentication, Consumer and Embedded Products.
Industrial Monitoring and Control
The M2GL005-VFG400I fits industrial monitoring equipment that requires programmable acquisition logic, communication conversion, and compact I/O integration. Its 6,060 logic cells can implement acquisition control, filtering, status tracking, and interface adaptation, while 171 I/O provide substantial connectivity in a 400-LFBGA package. On-chip flash configuration preserves the programmed logic across power cycles, allowing autonomous operation after restart. Industrial designers should use the manufacturer pin and packaging guide to assign voltage banks, and should validate timing, isolation, and operating-temperature requirements before releasing the board.
সুপারিশকৃত
Communications Interface Bridging
The M2GL005-VFG400I is useful for communications equipment requiring adaptable protocol bridging, parallel-to-serial conversion, framing, or clock-domain interface logic. Its 6,060 logic cells provide enough programmable logic for multiple moderate-complexity interfaces, while the 171 available I/O support external transceivers, memories, and status signals. Flash configuration supports repeatable standalone startup without a separate configuration device. The design must budget timing margin for the selected speed grade, keep high-speed routing short, and confirm all I/O assignments against the Microchip package documentation.
সুপারিশকৃত
Data Acquisition Front End
The M2GL005-VFG400I can implement digital control around analog-to-digital converters, sensors, and external memory in a compact data-acquisition subsystem. Programmable logic can coordinate sampling, triggers, data capture, filtering, and transfers while the 171 I/O reduce the need for separate interface devices. The 1.2 V core supply supports low-voltage digital implementation, and on-chip flash retains the acquisition configuration. Engineers should assign sensitive inputs to suitable banks, review timing constraints, and validate signal integrity before fabrication.
সুপারিশকৃত
Embedded System I/O Expansion
The M2GL005-VFG400I is appropriate when a microcontroller or processor system needs reconfigurable I/O expansion, protocol adapters, or dedicated control logic. With 6,060 logic cells and 171 I/O, it can consolidate peripheral interfaces that would otherwise occupy several fixed-function devices. Its flash-based configuration permits field updates and controlled boot behavior, while the IGLOO2 DMA architecture supports efficient data movement. Designers should establish clear ownership of boot, update, and recovery functions and should verify that the selected FPGA pinout matches the intended PCB footprint.
সুপারিশকৃত
Secure Connectivity and Authentication
The M2GL005-VFG400I supports secure-connectivity and authentication functions implemented as programmable logic rather than a fixed serial device. It can combine protocol handling, challenge-response logic, key-access control, and status monitoring in a compact design. On-chip flash configuration supports deterministic startup behavior, while the 400-pin package offers extensive connectivity for sensors, secure elements, and communications logic. Security analysis should include the programmed bitstream, update path, debug access, and boundary of trust rather than relying only on the FPGA cell count.
সুপারিশকৃত
Consumer and Embedded Products
The M2GL005-VFG400I is suitable for consumer and embedded products needing adaptable display, control, or peripheral-interface logic in a space-constrained board. The 6,060-cell device and 171 I/O allow product revisions to reuse programmable logic for keypad scanning, status control, display timing, and data routing. Flash configuration simplifies standalone startup, while the large package requires careful high-density PCB layout. Validate escape routing, thermal performance, and all I/O voltage domains using the manufacturer package and pin-description documentation.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা M2GL005-VFG400I — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | M2GL005-VF400I | M2GL005-VFG400 | M2GL005-1VFG400I |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 400-LFBGA | 400-LFBGA - same package | 400-LFBGA - same package | 400-LFBGA - same package |
| Logic Cells | 6,060 cells | 6,060 cells | 6,060 cells | 6,060 cells |
| Product Family | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 |
| Ordering-Code Grade | Industrial-grade I suffix | Different ordering suffix; verify grade | No I suffix; verify grade | -1 grade suffix; verify timing and temperature |
মূল পার্থক্যসমূহ
- Closest documented drop-in match (বনামM2GL005-VF400I)
- High I/O availability for compact embedded designs (বনামM2GL005-VF400I)
- Nonvolatile configuration in the same low-density footprint (বনামM2GL005-1VFG400I)
ডিজাইন নোট
Use the manufacturer IGLOO 2 power-supply and decoupling guidance for every voltage rail. Place the prescribed bypass capacitors directly at the corresponding 400-LFBGA supply balls, keep the return path short, and provide a stable ground reference. Verify the 1.2 V core tolerance, power-up behavior, and bank-specific I/O requirements during schematic review. Do not infer power-ball assignments from general BGA conventions; use the package pin table for this exact device.
The 400-LFBGA land pattern requires a multilayer board with short escape routes and adequate via access between the device and component pads. Follow the mechanical drawing for ball pitch, pad geometry, solder-mask definition, and footprint tolerances. Check drill-to-copper and solder-mask tolerances with the board fabricator, and reserve access for inspection or X-ray analysis because fine-pitch BGA solder joints cannot be visually inspected from the board surface.
Assign clocks, high-speed interfaces, and sensitive inputs only after confirming the legal I/O-bank combinations in the Microchip pin-description documentation. Keep clock and data traces short, provide a continuous return path, and avoid routing switching or high-current signals through adjacent signal areas. Review external memory, transceiver, and programmable-logic interfaces together so that timing constraints and voltage domains remain compatible after the final ball assignment.
Do not substitute the M2GL005-VFG256I or 144-pin TQG144 variants for this design because their packages and ball assignments are different. Likewise, the M2S005-VFG400I is a SmartFusion2 system-on-chip rather than an interchangeable IGLOO2 FPGA. For the same 400-LFBGA alternatives, verify the ordering-code speed grade, temperature grade, programming-file compatibility, and lifecycle requirements before approving a substitution.
A 400-ball package does not imply that all balls are usable user I/O. Power, configuration, clock, ground, and dedicated pins must be removed from general-purpose assignments. Use the Microchip IGLOO 2 FPGA Packaging and Pin Descriptions User Guide as the authoritative ball map, then cross-check the design against the pinout information for the VFG400 variant. This prevents footprint-compatible substitutions from producing invalid board connections.
কমপ্লায়েন্স তথ্য
No explicit environmental or automotive compliance declarations were identified for the exact M2GL005-VFG400I ordering code. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-mineral status with Microchip before qualification.