M2GL005-VFG400I - 6060-Cell IGLOO2 FPGA | Microchip
MPN: M2GL005-VFG400I ✓ 啟用中M2GL005-VFG400I 概覽
An FPGA is a programmable digital semiconductor whose logic, interconnect, and I/O resources can be configured after manufacture. A field-programmable gate array belongs to the broader logic-device hierarchy and semiconductor category. Unlike a fixed-function application-specific integrated circuit, an FPGA can be reprogrammed for evolving interfaces, logic revisions, and product variants. Microchip positions the IGLOO2 family for low-power, cost-sensitive embedded systems requiring flexible hardware and compact implementations.
The M2GL005-VFG400I combines 6,060 logic cells with a 400-pin package and on-chip flash configuration. Its 171 I/O resources make the device useful when a design needs numerous external connections relative to the available logic capacity. The 1.2 V operating supply supports integration with compatible low-voltage digital systems. Because configuration data is stored in flash, the device can retain its programmed configuration without requiring a separate configuration loader after power is restored.
The IGLOO2 architecture is designed for general-purpose programmable logic rather than application-specific signal processing. This makes it appropriate for protocol interfaces, bridge functions, input/output expansion, data acquisition control, and ancillary control logic surrounding a processor or microcontroller. Its 400-LFBGA land pattern also provides a high pin count for designs requiring extensive parallel connectivity.
Typical deployments include industrial monitoring, communications equipment, consumer electronics, embedded control systems, and interface adapters. In these systems, designers can use programmable logic to consolidate multiple interface functions, implement timing and protocol conversion, or isolate slower peripheral logic from the host processor. The large package is advantageous for high-I/O designs but requires careful escape routing and board-level thermal validation.
When assigning PCB resources, use the Microchip IGLOO 2 FPGA Packaging and Pin Descriptions User Guide to confirm every ball assignment, power location, and I/O standard. Validate each interface against its voltage domain and timing constraints before fabrication. The programming toolchain, configuration device, and board test strategy must also be evaluated as one complete design flow.
This product analysis combines the manufacturer device information, package characteristics, sourcing context, replacement screening, and practical implementation guidance. It is intended to help engineers identify the correct IGLOO2 density and package before completing FPGA placement, routing, power, and configuration decisions.
直接替換替代品,適用於 M2GL005-VFG400I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: M2GL005-VFG400I (相同外形與佔位) — 差異在於 Device Type, Configuration Memory, Programmable Logic Type, Logic Cells, Package.
M2GL005-VF400I
✅ 直接替換聯絡詢價
查看資料表 →M2GL005-VFG400
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →M2GL005-1VFG400I
✅ 直接替換📋 參考替代品(不在目錄中)
M2GL005-VFG400I 最大額定值與電氣特性
| Device Type | IGLOO2 low-density FPGA |
| Logic Cells | 6,060 cells |
| Core Supply Voltage | 1.2 V |
| I/O Count | 171 I/O |
| 封裝 | 400-LFBGA |
| Package Pin Count | 400 pins |
| Configuration Memory | On-chip flash |
| Embedded SRAM | 32 KB |
| Direct Memory Access Controllers | Multiple DMA controllers |
| Programmable Logic Type | Field-programmable gate array |
| Manufacturer | Microchip Technology |
| Product Family | IGLOO2 |
| 安裝類型 | Surface mount |
| Package Family | LFBGA family |
| Temperature Grade | Industrial |
M2GL005-VFG400I lfbga family 腳位配置指南
M2GL005-VFG400I(lfbga family 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: M2GL005-VFG400I.
請參閱 資料表 以查看完整腳位配置。
典型應用
M2GL005-VFG400I 適用於 6 應用s: Industrial Monitoring and Control, Communications Interface Bridging, Data Acquisition Front End, Embedded System I/O Expansion, Secure Connectivity and Authentication, Consumer and Embedded Products.
Industrial Monitoring and Control
The M2GL005-VFG400I fits industrial monitoring equipment that requires programmable acquisition logic, communication conversion, and compact I/O integration. Its 6,060 logic cells can implement acquisition control, filtering, status tracking, and interface adaptation, while 171 I/O provide substantial connectivity in a 400-LFBGA package. On-chip flash configuration preserves the programmed logic across power cycles, allowing autonomous operation after restart. Industrial designers should use the manufacturer pin and packaging guide to assign voltage banks, and should validate timing, isolation, and operating-temperature requirements before releasing the board.
推薦
Communications Interface Bridging
The M2GL005-VFG400I is useful for communications equipment requiring adaptable protocol bridging, parallel-to-serial conversion, framing, or clock-domain interface logic. Its 6,060 logic cells provide enough programmable logic for multiple moderate-complexity interfaces, while the 171 available I/O support external transceivers, memories, and status signals. Flash configuration supports repeatable standalone startup without a separate configuration device. The design must budget timing margin for the selected speed grade, keep high-speed routing short, and confirm all I/O assignments against the Microchip package documentation.
推薦
Data Acquisition Front End
The M2GL005-VFG400I can implement digital control around analog-to-digital converters, sensors, and external memory in a compact data-acquisition subsystem. Programmable logic can coordinate sampling, triggers, data capture, filtering, and transfers while the 171 I/O reduce the need for separate interface devices. The 1.2 V core supply supports low-voltage digital implementation, and on-chip flash retains the acquisition configuration. Engineers should assign sensitive inputs to suitable banks, review timing constraints, and validate signal integrity before fabrication.
推薦
Embedded System I/O Expansion
The M2GL005-VFG400I is appropriate when a microcontroller or processor system needs reconfigurable I/O expansion, protocol adapters, or dedicated control logic. With 6,060 logic cells and 171 I/O, it can consolidate peripheral interfaces that would otherwise occupy several fixed-function devices. Its flash-based configuration permits field updates and controlled boot behavior, while the IGLOO2 DMA architecture supports efficient data movement. Designers should establish clear ownership of boot, update, and recovery functions and should verify that the selected FPGA pinout matches the intended PCB footprint.
推薦
Secure Connectivity and Authentication
The M2GL005-VFG400I supports secure-connectivity and authentication functions implemented as programmable logic rather than a fixed serial device. It can combine protocol handling, challenge-response logic, key-access control, and status monitoring in a compact design. On-chip flash configuration supports deterministic startup behavior, while the 400-pin package offers extensive connectivity for sensors, secure elements, and communications logic. Security analysis should include the programmed bitstream, update path, debug access, and boundary of trust rather than relying only on the FPGA cell count.
推薦
Consumer and Embedded Products
The M2GL005-VFG400I is suitable for consumer and embedded products needing adaptable display, control, or peripheral-interface logic in a space-constrained board. The 6,060-cell device and 171 I/O allow product revisions to reuse programmable logic for keypad scanning, status control, display timing, and data routing. Flash configuration simplifies standalone startup, while the large package requires careful high-density PCB layout. Validate escape routing, thermal performance, and all I/O voltage domains using the manufacturer package and pin-description documentation.
推薦
推薦產品摘要
工程參考資料,適用於 M2GL005-VFG400I — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | M2GL005-VF400I | M2GL005-VFG400 | M2GL005-1VFG400I |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 400-LFBGA | 400-LFBGA - same package | 400-LFBGA - same package | 400-LFBGA - same package |
| Logic Cells | 6,060 cells | 6,060 cells | 6,060 cells | 6,060 cells |
| Product Family | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 |
| Ordering-Code Grade | Industrial-grade I suffix | Different ordering suffix; verify grade | No I suffix; verify grade | -1 grade suffix; verify timing and temperature |
主要差異化特點
- Closest documented drop-in match (對比M2GL005-VF400I)
- High I/O availability for compact embedded designs (對比M2GL005-VF400I)
- Nonvolatile configuration in the same low-density footprint (對比M2GL005-1VFG400I)
設計說明
Use the manufacturer IGLOO 2 power-supply and decoupling guidance for every voltage rail. Place the prescribed bypass capacitors directly at the corresponding 400-LFBGA supply balls, keep the return path short, and provide a stable ground reference. Verify the 1.2 V core tolerance, power-up behavior, and bank-specific I/O requirements during schematic review. Do not infer power-ball assignments from general BGA conventions; use the package pin table for this exact device.
The 400-LFBGA land pattern requires a multilayer board with short escape routes and adequate via access between the device and component pads. Follow the mechanical drawing for ball pitch, pad geometry, solder-mask definition, and footprint tolerances. Check drill-to-copper and solder-mask tolerances with the board fabricator, and reserve access for inspection or X-ray analysis because fine-pitch BGA solder joints cannot be visually inspected from the board surface.
Assign clocks, high-speed interfaces, and sensitive inputs only after confirming the legal I/O-bank combinations in the Microchip pin-description documentation. Keep clock and data traces short, provide a continuous return path, and avoid routing switching or high-current signals through adjacent signal areas. Review external memory, transceiver, and programmable-logic interfaces together so that timing constraints and voltage domains remain compatible after the final ball assignment.
Do not substitute the M2GL005-VFG256I or 144-pin TQG144 variants for this design because their packages and ball assignments are different. Likewise, the M2S005-VFG400I is a SmartFusion2 system-on-chip rather than an interchangeable IGLOO2 FPGA. For the same 400-LFBGA alternatives, verify the ordering-code speed grade, temperature grade, programming-file compatibility, and lifecycle requirements before approving a substitution.
A 400-ball package does not imply that all balls are usable user I/O. Power, configuration, clock, ground, and dedicated pins must be removed from general-purpose assignments. Use the Microchip IGLOO 2 FPGA Packaging and Pin Descriptions User Guide as the authoritative ball map, then cross-check the design against the pinout information for the VFG400 variant. This prevents footprint-compatible substitutions from producing invalid board connections.
合規資訊
No explicit environmental or automotive compliance declarations were identified for the exact M2GL005-VFG400I ordering code. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-mineral status with Microchip before qualification.