Analog Devices

MAX202ECPE+ - 120kbps RS-232 Transceiver | Analog Devices

MPN: MAX202ECPE+ ✗ জীবনকালের সমাপ্তি
5 V Vdss 16-pin PDIP Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

MAX202ECPE+ সারাংশ

The Analog Devices MAX202ECPE+ is a 2/2 full-duplex RS-232 transceiver operating from a single 5 V supply, supporting data rates in excess of 120 kbps in a 16-pin PDIP package. The device combines two driver and two receiver channels, integrated charge-pump circuitry, and ±15 kV ESD protection. Its transmitters maintain ±5 V EIA/TIA-232E output levels, while the receivers support robust communication over RS-232 and V.28 links.

An RS-232 transceiver is an interface IC that converts logic-level digital signals into RS-232 voltage levels and converts received RS-232 levels back into logic-compatible signals. It belongs to the serial-interface hierarchy, where a transceiver sits between a host controller and a physical communications port. Unlike a simple line receiver, the MAX202ECPE+ includes both transmit and receive paths in one device, allowing a compact node to manage bidirectional serial communication.

The principal benefits are integrated dual-channel operation, single-supply operation, 120 kbps performance, and ±15 kV ESD protection. The MAX202ECPE+ also avoids the need for a separate negative supply at the interface, because its on-chip charge pump produces the required bipolar driver levels. These characteristics suit equipment that needs standard RS-232 connectivity without a modern differential interface.

Internally, the transmit channels use charge-pump-assisted level translation, while the receiver channels provide noise-tolerant RS-232 signal conditioning. The driver output levels are specified as approximately ±5 V, matching the voltage range commonly associated with EIA/TIA-232E signaling. The Analog Devices product page states that the MAX202 family maintains these levels at data rates exceeding 120 kbps when loaded in accordance with EIA/TIA-232E.

Typical uses include industrial control terminals, serial test equipment, legacy peripheral connections, embedded service interfaces, and point-to-point RS-232 links. A dual-channel arrangement can connect two serial ports or support two independent cable directions when the system assigns separate driver and receiver pairs.

PCB design should account for the relatively high voltage swing on driver outputs and the ESD-sensitive nature of externally accessible connectors. Keep RS-232 traces away from clocks, switching-regulator nodes, and sensitive analog inputs. Follow the manufacturer datasheet for capacitor placement, charge-pump capacitor values, and connector-side protection layout.

This page organizes the MAX202ECPE+ specifications, verified source links, package information, alternatives, application guidance, and design considerations to support faster engineering evaluation and sourcing decisions.

এর জন্য ড্রপ-ইন বিকল্প MAX202ECPE+ — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible MAX202ECPE+ (একই form factor এবং footprint) — পার্থক্য রয়েছে External Capacitors, Mounting Type, Package, Supply Voltage.

Analog Devices
External Capacitors: 4 x 0.1 uF
Mounting Type: Through-Hole (THT)
Package: 16-PDIP (through-hole, 0.300 inch / 7.62 mm row spacing)
এর সাথে তুলনা করুন MAX202ECPE+ →

MAX202ECPE

✅ ড্রপ-ইন
📦 16-pin PDIP
Same 120 kbps RS-232 interface and ±15 kV ESD rating; the distinction is the orderable suffix rather than a change in pin count

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MAX202CPE+

✅ ড্রপ-ইন
Analog Devices
📦 16-pin PDIP
RS-232 Transceiver (2 Drivers / 2 Receivers) · 120 kbps (min) · +4.5 V to +5.5 V · 15 mA (typ) · 4 x 0.1 uF · +/-5 V EIA/TIA-232E compliant · +/-25 V · 0.5 V (typ)

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MAX202EEPE

✅ ড্রপ-ইন
📦 16-pin PDIP
Same 120 kbps RS-232 interface and ±15 kV ESD rating; the E and E suffix ordering variants differ in grade and marking

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MAX202ECPE-

✅ ড্রপ-ইন
📦 16-pin PDIP
Same MAX202 2/2, 120 kbps RS-232 architecture and 16-pin PDIP footprint; the trailing hyphen denotes a distinct ordering version

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MAX202CPE+

✅ ড্রপ-ইন
Analog Devices
📦 16-pin PDIP
RS-232 Transceiver (2 Drivers / 2 Receivers) · 120 kbps (min) · +4.5 V to +5.5 V · 15 mA (typ) · 4 x 0.1 uF · +/-5 V EIA/TIA-232E compliant · +/-25 V · 0.5 V (typ)

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MAX202ECPE+ বিশেষণ

Device Type 2/2 RS-232 transceiver
Channel Configuration 2 drivers and 2 receivers
Duplex Mode Full duplex
সাপ্লাই ভোল্টেজ 5 V
Maximum Data Rate 120 kbps
Driver Output Level ±5 V
ESD Protection ±15 kV
Standard EIA/TIA-232E and V.28
Charge Pump Integrated, single-supply operation
প্যাকেজ 16-pin PDIP
পিন সংখ্যা 16 pins
মাউন্টিং টাইপ Through-hole
External Capacitors 0.1 µF charge-pump capacitors

MAX202ECPE+ 16-pin pdip পিন কনফিগারেশন গাইড

MAX202ECPE+ (16-pin pdip প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

MAX202ECPE+-এর জন্য 16-pin pdip প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MAX202ECPE+.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

MAX202ECPE+ এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Serial Control Terminal, Legacy PC Serial Peripherals, Point-to-Point RS-232 Link, Serial Test and Measurement Equipment, Embedded Configuration and Service Port, Instrumentation and Data-Acquisition Interface.

🏭

Industrial Serial Control Terminal

The MAX202ECPE+ is suitable for an industrial terminal or controller that must communicate through a legacy RS-232 port. Its two transmitters and two receivers support full-duplex operation at up to 120 kbps, while the integrated charge pump permits operation from a single 5 V rail. The approximately ±5 V driver levels meet EIA/TIA-232E signaling expectations, and ±15 kV ESD protection adds useful resilience when the cable connects to field equipment. In the circuit, the controller UART connects to the logic-side pins while the DB9 or terminal connector connects to the driver and receiver pins. Engineers should preserve the pinout, use the required 0.1 µF charge-pump capacitors, and route the interface away from noisy power-conversion nodes.

🔧

Legacy PC Serial Peripherals

The MAX202ECPE+ can bridge a modern controller to equipment that still exposes an RS-232 connector, such as a printer, scanner, instrument, or service console. Full-duplex operation allows simultaneous command transmission and status reception, and the 120 kbps capability is suitable for moderate-rate control traffic rather than high-throughput file transfer. The device's ±15 kV ESD rating is especially relevant because an external RS-232 cable is susceptible to electrostatic discharge at the connector. Place the transceiver near the connector, maintain a clean return path, and observe the manufacturer's capacitor values. The single 5 V supply and internal charge pump simplify interface design where a negative rail would otherwise be required.

🌐

Point-to-Point RS-232 Link

For a point-to-point link between two embedded systems, the MAX202ECPE+ provides two complete RS-232 channels in one 16-pin PDIP package. Each channel combines a transmitter and receiver, allowing the same physical cable to carry data in both directions. The 120 kbps maximum supports command, telemetry, and diagnostic protocols operating well below the component's limit. Its approximately ±5 V output levels and EIA/TIA-232E compatibility make it appropriate for conventional RS-232 links. Because the outputs use charge-pump-generated bipolar levels, component placement and capacitor return paths are important. Keep the cable-side interface section compact and isolate it from precision analog, clock, and high-current switching paths on the PCB.

🔧

Serial Test and Measurement Equipment

The MAX202ECPE+ is appropriate for test and measurement instruments that require a legacy RS-232 control or service interface. Two driver and two receiver channels can support one primary command port plus a second auxiliary channel, or can be allocated according to the instrument's UART resources. Operation from one 5 V rail reduces the power-supply complexity of portable and rack-mounted equipment, while ±15 kV ESD protection helps manage charge introduced through long test leads. The interface should be implemented with short driver traces, solid ground returns, and connector-side isolation. Verify the instrument's logic levels, baud rate, cable length, and handshake requirements against the MAX202 datasheet before finalizing the board.

🖥️

Embedded Configuration and Service Port

The MAX202ECPE+ can provide a service configuration interface for embedded controllers, network appliances, or industrial gateways that need field access through RS-232. At up to 120 kbps, it is suitable for boot-loader messages, configuration uploads, diagnostic logs, and remote command channels. Integrating the transceiver on the controller board avoids a separate converter assembly and requires only a single 5 V supply because the charge-pump circuitry is integrated. The two-channel arrangement can support separate console and status paths where space and connector count permit. Keep the service connector away from high-energy switching nodes, use the datasheet-specified charge-pump capacitors, and account for the possibility of cable-borne ESD when selecting connector grounding and enclosure strategy.

📡

Instrumentation and Data-Acquisition Interface

The MAX202ECPE+ can connect a controller to laboratory or process instrumentation that retains an RS-232 command interface. Its 120 kbps capability is appropriate for parameter settings, calibration records, status polling, and compact measurement data. Two receivers can accept data or status from two instruments, while two transmitters can issue commands to separate devices if the logic interface permits. The approximately ±5 V driver output provides compatibility with standard EIA/TIA-232E signaling, and ±15 kV ESD protection improves robustness against electrostatic discharge on exposed cables. In a mixed-signal instrument, maintain a controlled return path between the RS-232 interface and analog ground, and position the transceiver near the external connector rather than routing protected signals across the board.

What is the MAX202ECPE+?
The MAX202ECPE+ is a 2/2 full-duplex RS-232 transceiver from Analog Devices. It contains two transmit channels and two receive channels, operates from a single 5 V supply, supports rates up to 120 kbps, and is packaged in a 16-pin PDIP. The Analog Devices MAX202 product information identifies the family as an RS-232 and V.28 line-driver and line-receiver product.
Where can I download the MAX202ECPE+ datasheet?
The official MAX202 datasheet and product information are available from Analog Devices at the product page linked in the datasheet field. The manufacturer describes the MAX202 family as an RS-232 transceiver with integrated charge-pump circuitry for single-supply operation. Use the manufacturer datasheet for the complete electrical characteristics, pin descriptions, application circuit, and capacitor requirements before laying out the PCB.
Where can I find the MAX202ECPE+ pinout?
The MAX202ECPE+ uses a 16-pin PDIP package, and its complete pin assignment must be taken from the MAX202 manufacturer datasheet rather than inferred from another package variant. The package page identifies the device as a 16-PDIP, but the detailed signal names are not reproduced in the cited product summary. Use the pin-description table and package drawing in the Analog Devices datasheet when assigning PCB tracks.
What is the operating voltage of MAX202ECPE+?
The MAX202ECPE+ operates from a single 5 V supply and uses integrated charge-pump circuitry to support RS-232 transmit levels without an external negative supply. Its drivers produce approximately ±5 V EIA/TIA-232E output levels. The Analog Devices product page specifies ±5 V levels at data rates in excess of 120 kbps when loaded according to EIA/TIA-232E.
How fast is the MAX202ECPE+ RS-232 transceiver?
The MAX202ECPE+ supports RS-232 communication at data rates up to 120 kbps. Analog Devices states that the MAX202 drivers maintain approximately ±5 V EIA/TIA-232E output levels at rates exceeding 120 kbps under the specified loading conditions. Actual link performance also depends on cable length, capacitance, grounding, baud-rate accuracy, and receiver bandwidth.
What ESD protection does MAX202ECPE+ provide?
The MAX202ECPE+ provides ±15 kV ESD protection on its RS-232 interfaces. This protection is particularly relevant when transmitter or receiver pins connect to an external DB9, modular connector, or long cable that may be exposed to electrostatic discharge. The Analog Devices MAX202 documentation identifies the family as an RS-232 transceiver designed for harsh communication environments.
MAX202ECPE+ vs MAX202ECPE - which is the better replacement?
The MAX202ECPE+ is the lead-free ordering designation, while MAX202ECPE is the closely related legacy designation listed for the same Analog Devices 2/2, 16-PDIP RS-232 transceiver. Both are identified as full RS-232 transceivers. The exact orderable suffix, temperature coverage, and current lifecycle should be confirmed against the manufacturer product page before substituting one marking for the other.
When should I choose MAX202ECPE+ over MAX202CPE+?
Choose the MAX202ECPE+ when the design requires the E-grade MAX202 variant, while the MAX202CPE+ serves as the C-grade alternative in the same 16-PDIP family. Both provide a 2/2 full-duplex RS-232 interface, single 5 V operation, and 120 kbps-class performance. The meaningful selection criterion is the required temperature grade rather than a change in pinout.
Is MAX202CPE+ a drop-in replacement for MAX202ECPE+?
The MAX202CPE+ is a pin-compatible option for the MAX202ECPE+ because both are listed as 2/2 full-duplex RS-232 transceivers in 16-pin PDIP packages and belong to the same MAX202 family. The key distinction is the C versus E ordering grade, which affects temperature coverage. Confirm that the lower grade still satisfies the enclosure's worst-case ambient temperature.
What can replace MAX202ECPE+?
The closest documented replacement is MAX202ECPE, which is listed as the same Analog Devices 2/2 full-duplex RS-232 transceiver in a 16-PDIP package. Other MAX202 suffix variants can share the family architecture, but only suffixes with the same PDIP footprint, pin functions, supply arrangement, and external capacitor requirements should be treated as drop-in choices. Verify the exact pinout and grade before substitution.
Is there a Maxim equivalent for MAX202ECPE+?
The MAX202ECPE+ itself is an Analog Devices product originally associated with Maxim Integrated. Its closest same-family alternatives include MAX202ECPE, MAX202CPE+, MAX202EEPE, and MAX202ECPE-, all tied to the MAX202 product line. Because alternatives from the MAX220, MAX223, MAX232, LT1480, SP232, and TC232 families can use different packages or interfaces, they should not be assumed to be drop-in replacements.
Where can I buy MAX202ECPE+ and check stock?
Use the Request a Quote form on this page to request current price, availability, quantity breaks, and lead time for MAX202ECPE+. The form is the appropriate route for a quote-based purchase and for checking the current production and distribution status. Package suffix, tube quantity, and any required temperature or marking specification should be stated in the request.
How much does MAX202ECPE+ cost?
Current pricing for MAX202ECPE+ should be requested through the Request a Quote form on this page because commercial terms and supply status can change. Submit the required quantity and packaging information to obtain a current quote. The page also provides a last-known pricing record for reference, but that historical figure is not a substitute for a live quotation.
What is the lead time for MAX202ECPE+?
Request the current lead time through the Request a Quote form on this page, including the required order quantity and whether the 16-pin PDIP package must be supplied in tubes. Lead time can depend on manufacturer inventory, order size, and packaging availability. The product should be treated as an active sourcing request rather than as confirmed stock.
What are the key specifications of MAX202ECPE+ engineers should know?
The MAX202ECPE+ combines two RS-232 drivers and two receivers in a 16-pin PDIP package. It operates from 5 V, supports data rates up to 120 kbps, provides approximately ±5 V transmitter levels, and includes ±15 kV ESD protection. Analog Devices describes the family as compliant with EIA/TIA-232E and V.28 while using an integrated charge pump for single-supply operation.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MAX202ECPE+ — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the MAX202ECPE+ when a design requires a 2/2 full-duplex RS-232 interface, single 5 V operation, up to 120 kbps communication, and a 16-pin PDIP footprint. Select MAX202ECPE when that legacy ordering designation is explicitly approved by the manufacturer for the production build. MAX202CPE+ and MAX202CPE are appropriate when the C-grade variant satisfies the required temperature range. MAX202EEPE and MAX202ECPE- remain options within the same MAX202 interface family, subject to confirmation of their exact grade and ordering status. Parts from the MAX220, MAX223, MAX232, LT1480, SP232, and TC232 families should not be treated as direct drop-in choices without verifying their footprints, pin functions, supply requirements, and external capacitor networks. For every replacement, preserve the original PCB footprint and compare the manufacturer datasheet pin table before releasing a production order.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য MAX202ECPE MAX202CPE+ MAX202EEPE MAX202ECPE- MAX202CPE
Package 16-pin PDIP 16-pin PDIP 16-pin PDIP 16-pin PDIP 16-pin PDIP 16-pin PDIP
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Device Type 2/2 full-duplex RS-232 transceiver 2/2 full-duplex RS-232 transceiver 2/2 full-duplex RS-232 transceiver 2/2 full-duplex RS-232 transceiver 2/2 full-duplex RS-232 transceiver 2/2 full-duplex RS-232 transceiver
Maximum Data Rate 120 kbps 120 kbps 120 kbps 120 kbps 120 kbps 120 kbps
Supply Voltage 5 V 5 V 5 V 5 V 5 V 5 V
Driver Output Level ±5 V ±5 V ±5 V ±5 V ±5 V ±5 V
ESD Protection ±15 kV ±15 kV ±15 kV ±15 kV ±15 kV ±15 kV
Standards Compatibility EIA/TIA-232E and V.28 EIA/TIA-232E and V.28 EIA/TIA-232E and V.28 EIA/TIA-232E and V.28 EIA/TIA-232E and V.28 EIA/TIA-232E and V.28
Charge Pump Integrated Integrated Integrated Integrated Integrated Integrated
External Charge-Pump Capacitors 0.1 µF 0.1 µF 0.1 µF 0.1 µF 0.1 µF 0.1 µF

মূল পার্থক্যসমূহ

  • Provides a complete four-channel interface in one package (বনামMAX202ECPE)
  • Single-supply RS-232 operation (বনামMAX202CPE+)
  • Drop-in MAX202 family footprint (বনামMAX202EEPE)

ডিজাইন নোট

Place the MAX202ECPE+ close to the external RS-232 connector and route driver outputs directly to the connector pins. Keep receiver traces away from switching nodes, high-current return paths, oscillators, and precision analog inputs. Maintain a continuous ground reference under the interface area and connect connector shield or chassis ground according to the equipment's grounding strategy.

Install the manufacturer-specified 0.1 µF charge-pump capacitors with short, symmetrical traces and place decoupling close to the device's supply pin. Because the MAX202ECPE+ generates bipolar driver levels from a single 5 V supply, unstable supply decoupling can appear as noise or timing degradation on the cable interface. Verify startup, voltage ripple, and charge-pump behavior across the intended temperature range.

Do not treat every electrically similar RS-232 transceiver as a drop-in replacement. A valid substitution must use the same 16-pin PDIP footprint, matching pin functions, 5 V supply arrangement, charge-pump capacitor connection, and driver/receiver electrical characteristics. MAX202 suffix variants are preferred because their family pinout and interface architecture are documented; other RS-232 families may require different packages or external capacitors.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Yes
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The trailing plus in MAX202ECPE+ denotes the lead-free ordering option. RoHS, REACH, halogen-free, and conflict-minerals status were not explicitly stated in the cited product information.

ডেটা যাচাই করা হয়েছে: 2026-11-13 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

maxim max202ecpe MAX202ECPE+ datasheet MAX202ECPE+ datasheet pdf MAX202ECPE+ pinout MAX202ECPE+ replacement MAX202ECPE+ equivalent MAX202ECPE+ price MAX202ECPE+ stock MAX202ECPE+ vs MAX202ECPE MAX202ECPE+ vs MAX202CPE+ MAX202 16-PDIP pinout MAX202ECPE+ application circuit

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Analog Devices Maxim Integrated MAX202ECPE+ MAX202ECPE MAX202CPE+ MAX202EEPE MAX202ECPE- MAX202CPE RS-232 transceiver RS-232 V.28 EIA/TIA-232E line driver line receiver full duplex charge pump single-supply operation 120 kbps ±5 V output ±15 kV ESD protection 16-pin PDIP PDIP package through-hole mounting industrial serial communication legacy RS-232 interface
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন