MAX202ECPE+ - 120kbps RS-232 Transceiver | Analog Devices
N.º da peça: MAX202ECPE+ ✗ Fim de vidaMAX202ECPE+ Visão geral
An RS-232 transceiver is an interface IC that converts logic-level digital signals into RS-232 voltage levels and converts received RS-232 levels back into logic-compatible signals. It belongs to the serial-interface hierarchy, where a transceiver sits between a host controller and a physical communications port. Unlike a simple line receiver, the MAX202ECPE+ includes both transmit and receive paths in one device, allowing a compact node to manage bidirectional serial communication.
The principal benefits are integrated dual-channel operation, single-supply operation, 120 kbps performance, and ±15 kV ESD protection. The MAX202ECPE+ also avoids the need for a separate negative supply at the interface, because its on-chip charge pump produces the required bipolar driver levels. These characteristics suit equipment that needs standard RS-232 connectivity without a modern differential interface.
Internally, the transmit channels use charge-pump-assisted level translation, while the receiver channels provide noise-tolerant RS-232 signal conditioning. The driver output levels are specified as approximately ±5 V, matching the voltage range commonly associated with EIA/TIA-232E signaling. The Analog Devices product page states that the MAX202 family maintains these levels at data rates exceeding 120 kbps when loaded in accordance with EIA/TIA-232E.
Typical uses include industrial control terminals, serial test equipment, legacy peripheral connections, embedded service interfaces, and point-to-point RS-232 links. A dual-channel arrangement can connect two serial ports or support two independent cable directions when the system assigns separate driver and receiver pairs.
PCB design should account for the relatively high voltage swing on driver outputs and the ESD-sensitive nature of externally accessible connectors. Keep RS-232 traces away from clocks, switching-regulator nodes, and sensitive analog inputs. Follow the manufacturer datasheet for capacitor placement, charge-pump capacitor values, and connector-side protection layout.
This page organizes the MAX202ECPE+ specifications, verified source links, package information, alternatives, application guidance, and design considerations to support faster engineering evaluation and sourcing decisions.
Alternativas drop-in para MAX202ECPE+ — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MAX202ECPE+ (mesmo formato e footprint) — diferindo em External Capacitors, Mounting Type, Package, Supply Voltage.
MAX202ECPE
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MAX202CPE+
✅ Drop-InConsulte o preço
Ver ficha técnica →MAX202EEPE
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MAX202ECPE-
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MAX202CPE+
✅ Drop-InConsulte o preço
Ver ficha técnica →MAX202ECPE+ Especificações
| Device Type | 2/2 RS-232 transceiver |
| Channel Configuration | 2 drivers and 2 receivers |
| Duplex Mode | Full duplex |
| Tensão de alimentação | 5 V |
| Maximum Data Rate | 120 kbps |
| Driver Output Level | ±5 V |
| ESD Protection | ±15 kV |
| Standard | EIA/TIA-232E and V.28 |
| Charge Pump | Integrated, single-supply operation |
| Encapsulamento | 16-pin PDIP |
| Contagem de pinos | 16 pins |
| Tipo de montagem | Through-hole |
| External Capacitors | 0.1 µF charge-pump capacitors |
Guia de Configuração de Pinos do MAX202ECPE+ 16-pin pdip
Configuração de pinos para MAX202ECPE+ (pacote 16-pin pdip). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para MAX202ECPE+.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
MAX202ECPE+ é adequado para 6 aplicaçãos: Industrial Serial Control Terminal, Legacy PC Serial Peripherals, Point-to-Point RS-232 Link, Serial Test and Measurement Equipment, Embedded Configuration and Service Port, Instrumentation and Data-Acquisition Interface.
Industrial Serial Control Terminal
The MAX202ECPE+ is suitable for an industrial terminal or controller that must communicate through a legacy RS-232 port. Its two transmitters and two receivers support full-duplex operation at up to 120 kbps, while the integrated charge pump permits operation from a single 5 V rail. The approximately ±5 V driver levels meet EIA/TIA-232E signaling expectations, and ±15 kV ESD protection adds useful resilience when the cable connects to field equipment. In the circuit, the controller UART connects to the logic-side pins while the DB9 or terminal connector connects to the driver and receiver pins. Engineers should preserve the pinout, use the required 0.1 µF charge-pump capacitors, and route the interface away from noisy power-conversion nodes.
Legacy PC Serial Peripherals
The MAX202ECPE+ can bridge a modern controller to equipment that still exposes an RS-232 connector, such as a printer, scanner, instrument, or service console. Full-duplex operation allows simultaneous command transmission and status reception, and the 120 kbps capability is suitable for moderate-rate control traffic rather than high-throughput file transfer. The device's ±15 kV ESD rating is especially relevant because an external RS-232 cable is susceptible to electrostatic discharge at the connector. Place the transceiver near the connector, maintain a clean return path, and observe the manufacturer's capacitor values. The single 5 V supply and internal charge pump simplify interface design where a negative rail would otherwise be required.
Point-to-Point RS-232 Link
For a point-to-point link between two embedded systems, the MAX202ECPE+ provides two complete RS-232 channels in one 16-pin PDIP package. Each channel combines a transmitter and receiver, allowing the same physical cable to carry data in both directions. The 120 kbps maximum supports command, telemetry, and diagnostic protocols operating well below the component's limit. Its approximately ±5 V output levels and EIA/TIA-232E compatibility make it appropriate for conventional RS-232 links. Because the outputs use charge-pump-generated bipolar levels, component placement and capacitor return paths are important. Keep the cable-side interface section compact and isolate it from precision analog, clock, and high-current switching paths on the PCB.
Serial Test and Measurement Equipment
The MAX202ECPE+ is appropriate for test and measurement instruments that require a legacy RS-232 control or service interface. Two driver and two receiver channels can support one primary command port plus a second auxiliary channel, or can be allocated according to the instrument's UART resources. Operation from one 5 V rail reduces the power-supply complexity of portable and rack-mounted equipment, while ±15 kV ESD protection helps manage charge introduced through long test leads. The interface should be implemented with short driver traces, solid ground returns, and connector-side isolation. Verify the instrument's logic levels, baud rate, cable length, and handshake requirements against the MAX202 datasheet before finalizing the board.
Embedded Configuration and Service Port
The MAX202ECPE+ can provide a service configuration interface for embedded controllers, network appliances, or industrial gateways that need field access through RS-232. At up to 120 kbps, it is suitable for boot-loader messages, configuration uploads, diagnostic logs, and remote command channels. Integrating the transceiver on the controller board avoids a separate converter assembly and requires only a single 5 V supply because the charge-pump circuitry is integrated. The two-channel arrangement can support separate console and status paths where space and connector count permit. Keep the service connector away from high-energy switching nodes, use the datasheet-specified charge-pump capacitors, and account for the possibility of cable-borne ESD when selecting connector grounding and enclosure strategy.
Instrumentation and Data-Acquisition Interface
The MAX202ECPE+ can connect a controller to laboratory or process instrumentation that retains an RS-232 command interface. Its 120 kbps capability is appropriate for parameter settings, calibration records, status polling, and compact measurement data. Two receivers can accept data or status from two instruments, while two transmitters can issue commands to separate devices if the logic interface permits. The approximately ±5 V driver output provides compatibility with standard EIA/TIA-232E signaling, and ±15 kV ESD protection improves robustness against electrostatic discharge on exposed cables. In a mixed-signal instrument, maintain a controlled return path between the RS-232 interface and analog ground, and position the transceiver near the external connector rather than routing protected signals across the board.
Dados de referência de engenharia para MAX202ECPE+ — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MAX202ECPE | MAX202CPE+ | MAX202EEPE | MAX202ECPE- | MAX202CPE |
|---|---|---|---|---|---|---|
| Package | 16-pin PDIP | 16-pin PDIP | 16-pin PDIP | 16-pin PDIP | 16-pin PDIP | 16-pin PDIP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Device Type | 2/2 full-duplex RS-232 transceiver | 2/2 full-duplex RS-232 transceiver | 2/2 full-duplex RS-232 transceiver | 2/2 full-duplex RS-232 transceiver | 2/2 full-duplex RS-232 transceiver | 2/2 full-duplex RS-232 transceiver |
| Maximum Data Rate | 120 kbps | 120 kbps | 120 kbps | 120 kbps | 120 kbps | 120 kbps |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Driver Output Level | ±5 V | ±5 V | ±5 V | ±5 V | ±5 V | ±5 V |
| ESD Protection | ±15 kV | ±15 kV | ±15 kV | ±15 kV | ±15 kV | ±15 kV |
| Standards Compatibility | EIA/TIA-232E and V.28 | EIA/TIA-232E and V.28 | EIA/TIA-232E and V.28 | EIA/TIA-232E and V.28 | EIA/TIA-232E and V.28 | EIA/TIA-232E and V.28 |
| Charge Pump | Integrated | Integrated | Integrated | Integrated | Integrated | Integrated |
| External Charge-Pump Capacitors | 0.1 µF | 0.1 µF | 0.1 µF | 0.1 µF | 0.1 µF | 0.1 µF |
Principais diferenciais
- Provides a complete four-channel interface in one package (vs MAX202ECPE)
- Single-supply RS-232 operation (vs MAX202CPE+)
- Drop-in MAX202 family footprint (vs MAX202EEPE)
Notas de projeto
Place the MAX202ECPE+ close to the external RS-232 connector and route driver outputs directly to the connector pins. Keep receiver traces away from switching nodes, high-current return paths, oscillators, and precision analog inputs. Maintain a continuous ground reference under the interface area and connect connector shield or chassis ground according to the equipment's grounding strategy.
Install the manufacturer-specified 0.1 µF charge-pump capacitors with short, symmetrical traces and place decoupling close to the device's supply pin. Because the MAX202ECPE+ generates bipolar driver levels from a single 5 V supply, unstable supply decoupling can appear as noise or timing degradation on the cable interface. Verify startup, voltage ripple, and charge-pump behavior across the intended temperature range.
Do not treat every electrically similar RS-232 transceiver as a drop-in replacement. A valid substitution must use the same 16-pin PDIP footprint, matching pin functions, 5 V supply arrangement, charge-pump capacitor connection, and driver/receiver electrical characteristics. MAX202 suffix variants are preferred because their family pinout and interface architecture are documented; other RS-232 families may require different packages or external capacitors.
Informações de conformidade
The trailing plus in MAX202ECPE+ denotes the lead-free ordering option. RoHS, REACH, halogen-free, and conflict-minerals status were not explicitly stated in the cited product information.