MAX202ECSE+T - 5V RS-232 Transceiver, 120kbps | Maxim
MPN: MAX202ECSE+T ✓ সক্রিয়MAX202ECSE+T সারাংশ
An RS-232 transceiver is an interface IC that converts between logic-level signals used by digital systems and the positive and negative voltage levels carried by RS-232 links. In the broader power-management and communications hierarchy, the MAX202ECSE+T combines a charge-pump voltage converter, line-driver circuitry, line-receiver circuitry, and electrostatic-discharge protection in one interface device. This integration allows a compact design to operate from one +5 V rail while interfacing to legacy serial equipment.
Key features include two drivers, two receivers, operation from a single +5 V supply, data signaling up to 120 kbit/s, a maximum driver output slew rate of 30 V/µs, and ±15 kV ESD protection. The integrated charge pump eliminates the need for an external negative supply. Its narrow 16-pin SOIC package also makes the device suitable for established through-hole-style surface-mount PCB layouts where larger RS-232 packages would be inconvenient.
The MAX202 family uses bipolar line-interface levels while the device-side pins use conventional logic-compatible levels. The charge pump produces the negative voltage required by the drivers, while the receivers include the input conditioning needed for noisy RS-232 environments. According to the Analog Devices MAX202E family description, the MAX202E devices meet EIA/TIA-232E and CCITT V.28 specifications at data rates up to 120 kbit/s when loaded in accordance with the applicable interface requirements.
Typical uses include industrial serial-console links, instrumentation interfaces, POS equipment, legacy computer ports, factory-control connections, and embedded systems that communicate with RS-232 peripherals. The integrated ±15 kV ESD protection is particularly useful where a cable-exposed port may be touched during installation or service. A design should nevertheless maintain suitable grounding and route the protected connector interface away from sensitive digital nodes.
The main design consideration is signal and power integrity. Keep charge-pump and supply traces away from sensitive analog inputs, place bypass capacitance close to the supply pins, and provide controlled return paths between the equipment and connected RS-232 equipment. Confirm the logic levels, data direction, shutdown behavior, and connector pin assignment of the exact MAX202E variant before finalizing a PCB.
This page combines manufacturer interface specifications, package and application guidance, practical layout considerations, and a structured comparison of potential MAX202-family and cross-brand RS-232 alternatives. It is intended to help engineers select the correct electrical function, package, and protection level rather than relying only on a basic interface-transceiver description.
এর জন্য ড্রপ-ইন বিকল্প MAX202ECSE+T — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible MAX202ECSE+T (একই form factor এবং footprint) — পার্থক্য রয়েছে Product Type, Package, Maximum Data Rate, Transceiver Configuration, ESD Protection.
MAX202ICSE+
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →MAX202CSE+
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →MAX202EESE+
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →MAX202IDG4
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →MAX232ECSE+T
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →ADM202JRNZ
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
MAX202ECSE+T বিশেষণ
| Product Type | RS-232 transceiver |
| Transceiver Configuration | 2/2 full-duplex |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| সাপ্লাই ভোল্টেজ | +5 V |
| Maximum Data Rate | 120 kbit/s |
| Maximum Driver Output Slew Rate | 30 V/µs |
| ESD Protection | ±15 kV HBM |
| Interface Standards | EIA/TIA-232E and V.28 |
| Charge Pump | Integrated dual charge-pump circuitry |
| প্যাকেজ | 16-pin narrow SOIC |
| মাউন্টিং টাইপ | Surface mount |
| Standard Compliance | EIA/TIA-232E and CCITT V.28 |
MAX202ECSE+T 16-pin narrow soic পিন কনফিগারেশন গাইড
MAX202ECSE+T (16-pin narrow soic প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MAX202ECSE+T.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
MAX202ECSE+T এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Serial Console, Point-of-Sale Equipment, Instrumentation Control Link, Embedded Legacy Port Support, Network Equipment Management, Legacy Computer Serial Port.
Industrial Serial Console
The MAX202ECSE+T is well suited to an RS-232 console connection because it combines two drivers, two receivers, and integrated charge-pump circuitry in a single +5 V device. At data rates up to 120 kbit/s, it can carry diagnostic commands and status data between a controller and a service terminal without requiring a separate negative power rail. The ±15 kV HBM protection on the RS-232 connection pins adds useful handling margin for industrially deployed equipment. In implementation, place the device near the DB9 or equivalent connector, keep the protected line traces short, provide solid chassis-to-logic grounding, and include local bypass capacitance on the +5 V supply.
সুপারিশকৃত
Point-of-Sale Equipment
The MAX202ECSE+T can bridge legacy POS peripherals that use RS-232 while keeping the host electronics powered from +5 V. Two transmitters and two receivers support bidirectional command and status traffic without external level-shifter components, while the integrated charge pump supplies the bipolar line voltages internally. Its 120 kbit/s capability is more than adequate for receipt printers, scales, card readers, and service terminals operating at conventional serial-port rates. For a compact POS product, the 16-pin narrow SOIC footprint reduces board area, while the ±15 kV HBM rating helps protect exposed connector pins during routine installation and servicing.
সুপারিশকৃত
Instrumentation Control Link
The MAX202ECSE+T supports control and measurement links between laboratory or industrial instruments and a computer or embedded controller. EIA/TIA-232E and V.28 operation, together with two drivers and two receivers, allows bidirectional command exchange over a cable, and the integrated charge pump avoids a separate negative supply in the instrument. Data rates up to 120 kbit/s suit configuration downloads, status polling, and low-bandwidth measurement records rather than high-volume sensor streaming. Place the transceiver near the connector, maintain a continuous signal-ground return, and isolate chassis noise so that switching supplies or high-energy test circuits do not distort the bipolar receive signal.
সুপারিশকৃত
Embedded Legacy Port Support
The MAX202ECSE+T lets a modern embedded controller retain compatibility with equipment that still exposes an RS-232 port. A single +5 V rail powers the IC, and its integrated charge pump creates the negative driver voltage needed by legacy equipment, simplifying system partitioning around modern 3.3 V controllers. The two-driver, two-receiver arrangement supports command, response, and handshake lines, while operation up to 120 kbit/s covers many configuration protocols. The narrow 16-pin SOIC package is useful when an existing PCB already uses that footprint. Confirm logic-level compatibility, enable polarity, and the precise receiver-enable requirements before assigning controller GPIOs.
সুপারিশকৃত
Network Equipment Management
The MAX202ECSE+T can provide a management-only RS-232 channel in network appliances, telecom equipment, and access hardware that still uses a local service port. The interface delivers up to 120 kbit/s with one +5 V supply, allowing a management processor to issue console commands and read diagnostic information while the main equipment uses faster or more integrated connectivity. Two receivers and two drivers are useful where the protocol uses separate transmit, receive, and handshake signals. The ±15 kV HBM protection rating is advantageous because service connectors are frequently accessible during installation. Use a dedicated connector ground, maintain appropriate creepage and clearance, and avoid routing charge-pump return current through sensitive measurement grounds.
সুপারিশকৃত
Legacy Computer Serial Port
The MAX202ECSE+T is appropriate for adding a compact RS-232 service or peripheral port to legacy computer and controller hardware. Its two line drivers and two line receivers support a complete bidirectional serial arrangement, while the integrated charge pump eliminates the external negative supply and charge-pump capacitors commonly associated with older RS-232 implementations. Support for data rates up to 120 kbit/s covers standard serial peripherals and legacy BIOS or service interfaces. The 16-pin narrow SOIC package allows implementation on space-constrained boards, but the designer must verify the enable function, logic thresholds, and line-driver slew behavior against the system requirements. Add protection and grounding appropriate to the external connector environment.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MAX202ECSE+T — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | MAX202ICSE+ | MAX202CSE | MAX202EESE | MAX202IDG4 | MAX232ECSE+T | ADM202JRNZ |
|---|---|---|---|---|---|---|---|
| Package | 16-pin narrow SOIC | 16-pin narrow SOIC | 16-pin narrow SOIC | 16-pin narrow SOIC | 16-pin narrow SOIC | 16-pin narrow SOIC | 16-pin narrow SOIC |
| Brand | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated | Analog Devices |
| Transceiver Configuration | 2/2 full-duplex RS-232 | 2/2 RS-232 transceiver | 2/2 RS-232 transceiver | 2/2 RS-232 transceiver | 2/2 RS-232 transceiver | 2/2 RS-232 transceiver | 2/2 RS-232 transceiver |
| Supply Voltage | +5 V | +5 V | +5 V | +5 V | +5 V | +5 V | +5 V |
| Maximum Data Rate | 120 kbit/s | 120 kbit/s | 120 kbit/s | 120 kbit/s | 120 kbit/s | 120 kbit/s | 120 kbit/s |
| Charge-Pump Architecture | Integrated dual charge pump | Integrated charge pump | Integrated charge pump | Integrated charge pump | Integrated charge pump | Integrated charge pump | Integrated charge pump |
| Enable and Shutdown Control | E-variant enable arrangement | I-variant shutdown arrangement | C-variant control arrangement | E-variant control arrangement with different ordering code | I-variant arrangement | MAX232 driver-enable and receiver-control arrangement | Shutdown and receiver-control arrangement |
| Interface Standards | EIA/TIA-232E and V.28 | EIA/TIA-232E and V.28 | EIA/TIA-232E and V.28 | EIA/TIA-232E and V.28 | EIA/TIA-232E and V.28 | EIA/TIA-232E and V.28 | RS-232 and V.28 |
মূল পার্থক্যসমূহ
- Provides the E-variant enable function within a compact 16-pin narrow SOIC (বনামMAX202CSE)
- Maintains a 120 kbit/s interface rate with integrated charge-pump operation (বনামADM202JRNZ)
- Offers ±15 kV HBM protection on exposed RS-232 connection pins (বনামMAX202IDG4)
ডিজাইন নোট
Place the MAX202ECSE+T close to the RS-232 connector and route the protected driver and receiver nets as short, direct paths. Keep the connector ground and logic ground connected according to the product grounding strategy, and avoid routing protected serial lines beneath high-current switching nodes. A short interface path also limits radiated emissions and reduces susceptibility to ESD-coupled events when the cable is attached or disconnected.
Decouple the +5 V supply close to the transceiver with the capacitance and voltage rating recommended in the manufacturer datasheet. Keep charge-pump current paths compact and isolate them from sensitive analog or reference grounds. Because the integrated charge pump generates switch currents internally, stable local supply voltage is important for stable receiver thresholds and compliant driver output levels under data activity.
Do not treat identical SOIC packages as sufficient proof of interchangeability. Compare every pin, including enable, shutdown, receiver-enable, charge-pump, and ground connections, because MAX202E, MAX202I, MAX202C, MAX232, and ADM202 options can assign those functions differently. Also verify logic thresholds against the controller’s supply voltage and check whether the design requires fail-safe receiver behavior during reset.
Use the manufacturer’s recommended charge-pump capacitor values and keep those components close to their associated pins. Avoid extending the charge-pump traces, and place the transceiver away from precision measurement inputs where practical. A common signal-ground reference helps control return current, while proper chassis grounding and connector design remain important because the ±15 kV HBM rating does not replace external surge or lightning protection.
কমপ্লায়েন্স তথ্য
The MAX202E family meets EIA/TIA-232E and CCITT V.28 interface requirements. RoHS, REACH, lead-free, halogen-free, and conflict-mineral statuses require confirmation from the current manufacturer product documentation.