Maxim Integrated

MAX202ECSE+T - 5V RS-232 Transceiver, 120kbps | Maxim

Référence : MAX202ECSE+T ✓ Actif
+5 V Vdss EIA/TIA-232E and V.28 Rds(on) 16-pin narrow SOIC Package
MOQ : 1 |

MAX202ECSE+T Présentation

The Analog Devices MAX202ECSE+T is a +5 V RS-232 transceiver with two line drivers, two line receivers, integrated charge-pump circuitry, and ±15 kV ESD protection in a 16-pin narrow SOIC package. It supports data rates up to 120 kbit/s and is intended for EIA/TIA-232E and V.28 serial-port links where a single 5 V supply must generate the bipolar levels required by RS-232 equipment.

An RS-232 transceiver is an interface IC that converts between logic-level signals used by digital systems and the positive and negative voltage levels carried by RS-232 links. In the broader power-management and communications hierarchy, the MAX202ECSE+T combines a charge-pump voltage converter, line-driver circuitry, line-receiver circuitry, and electrostatic-discharge protection in one interface device. This integration allows a compact design to operate from one +5 V rail while interfacing to legacy serial equipment.

Key features include two drivers, two receivers, operation from a single +5 V supply, data signaling up to 120 kbit/s, a maximum driver output slew rate of 30 V/µs, and ±15 kV ESD protection. The integrated charge pump eliminates the need for an external negative supply. Its narrow 16-pin SOIC package also makes the device suitable for established through-hole-style surface-mount PCB layouts where larger RS-232 packages would be inconvenient.

The MAX202 family uses bipolar line-interface levels while the device-side pins use conventional logic-compatible levels. The charge pump produces the negative voltage required by the drivers, while the receivers include the input conditioning needed for noisy RS-232 environments. According to the Analog Devices MAX202E family description, the MAX202E devices meet EIA/TIA-232E and CCITT V.28 specifications at data rates up to 120 kbit/s when loaded in accordance with the applicable interface requirements.

Typical uses include industrial serial-console links, instrumentation interfaces, POS equipment, legacy computer ports, factory-control connections, and embedded systems that communicate with RS-232 peripherals. The integrated ±15 kV ESD protection is particularly useful where a cable-exposed port may be touched during installation or service. A design should nevertheless maintain suitable grounding and route the protected connector interface away from sensitive digital nodes.

The main design consideration is signal and power integrity. Keep charge-pump and supply traces away from sensitive analog inputs, place bypass capacitance close to the supply pins, and provide controlled return paths between the equipment and connected RS-232 equipment. Confirm the logic levels, data direction, shutdown behavior, and connector pin assignment of the exact MAX202E variant before finalizing a PCB.

This page combines manufacturer interface specifications, package and application guidance, practical layout considerations, and a structured comparison of potential MAX202-family and cross-brand RS-232 alternatives. It is intended to help engineers select the correct electrical function, package, and protection level rather than relying only on a basic interface-transceiver description.

Alternatives de remplacement direct pour MAX202ECSE+T — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

Variantes de cette série

Modèles de la même série directement compatibles avec MAX202ECSE+T (même facteur de forme et même empreinte) — différant par Product Type, Package, Maximum Data Rate, Transceiver Configuration, ESD Protection.

Maxim Integrated
Product Type: Dual RS-232 transceiver interface IC
Package: 16-pin SOIC
Maximum Data Rate: In excess of 120 kbps
Comparer avec MAX202ECSE+T →
Analog Devices
Package: 16-pin SOIC, 0.154 inch body width, 3.90 mm body width
Transceiver Configuration: 2/2 full-duplex RS-232 transceiver
ESD Protection: 15 kV
Comparer avec MAX202ECSE+T →
Analog Devices
Package: 16-SOIC, 0.154 in x 3.90 mm width
Transceiver Configuration: 2/2 full RS-232
ESD Protection: 15 kV
Comparer avec MAX202ECSE+T →
Analog Devices
Product Type: RS-232 line transceiver
Package: 16-pin SOIC
Maximum Data Rate: 120 kbps
Comparer avec MAX202ECSE+T →
Analog Devices
Product Type: Dual RS-232 transceiver
Package: 16-pin SOIC
ESD Protection: 15 kV
Comparer avec MAX202ECSE+T →
Analog Devices
Product Type: 2/2 RS-232 transceiver
Package: 16-SOIC narrow
Maximum Data Rate: 120kbps
Comparer avec MAX202ECSE+T →
Texas Instruments
Product Type: Dual RS-232 line driver/receiver transceiver
Package: 16-pin SOIC
Maximum Data Rate: 120 kbps
Comparer avec MAX202ECSE+T →

MAX202ICSE+

✅ Remplacement direct
Analog Devices
📦 16-pin narrow SOIC
2/2 RS-232 transceiver · 2 · 2 · RS-232 / EIA-TIA-232E · 120kbps · 4.5V to 5.5V · ±5V · 500mV

Contactez-nous pour le prix

Voir la fiche technique →

MAX202CSE+

✅ Remplacement direct
Maxim Integrated
📦 16-pin narrow SOIC
Dual RS-232 transceiver interface IC · +5 V · 2 · 2 · In excess of 120 kbps · ±5 V EIA/TIA-232E · 0.1 µF · EIA/TIA-232E

Contactez-nous pour le prix

Voir la fiche technique →

MAX202EESE+

✅ Remplacement direct
Analog Devices
📦 16-pin narrow SOIC
RS-232 line transceiver · 2 · 2 · +5 V · 120 kbps · ±15 kV HBM · EIA/TIA-232E and CCITT V.28 · 16-pin SOIC

Contactez-nous pour le prix

Voir la fiche technique →

MAX202IDG4

✅ Remplacement direct
Texas Instruments
📦 16-pin narrow SOIC
Dual RS-232 line driver/receiver transceiver · 5 V · 4.5 V to 5.5 V · 2 · 2 · 120 kbps · ±9 V · ±15 kV

Contactez-nous pour le prix

Voir la fiche technique →

MAX232ECSE+T

✅ Remplacement direct
Analog Devices
📦 16-pin narrow SOIC
RS-232 transceiver · 2 · 2 · Up to 120kbps · +5V · 4.5V to 5.5V · EIA/TIA-232E and CCITT V.28 · ±15kV human body model

Contactez-nous pour le prix

Voir la fiche technique →

ADM202JRNZ

✅ Remplacement direct
📦 16-pin narrow SOIC
Same 16-pin RS-232 transceiver format and 120 kbit/s class, with shutdown and receiver-control details differing from MAX202ECSE+T.

📋 Alternative de référence (hors catalogue)

MAX202ECSE+T Spécifications

Product Type RS-232 transceiver
Transceiver Configuration 2/2 full-duplex
Number of Drivers 2
Number of Receivers 2
Tension d'alimentation +5 V
Maximum Data Rate 120 kbit/s
Maximum Driver Output Slew Rate 30 V/µs
ESD Protection ±15 kV HBM
Interface Standards EIA/TIA-232E and V.28
Charge Pump Integrated dual charge-pump circuitry
Boîtier 16-pin narrow SOIC
Type de montage Surface mount
Standard Compliance EIA/TIA-232E and CCITT V.28

Guide de configuration des broches du MAX202ECSE+T 16-pin narrow soic

Configuration des broches du MAX202ECSE+T (boîtier 16-pin narrow soic). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.

Schéma de brochage du boîtier 16-pin narrow soic pour le MAX202ECSE+T

Aucune donnée de brochage détaillée disponible pour MAX202ECSE+T.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

MAX202ECSE+T convient pour 6 applications: Industrial Serial Console, Point-of-Sale Equipment, Instrumentation Control Link, Embedded Legacy Port Support, Network Equipment Management, Legacy Computer Serial Port.

🏭

Industrial Serial Console

The MAX202ECSE+T is well suited to an RS-232 console connection because it combines two drivers, two receivers, and integrated charge-pump circuitry in a single +5 V device. At data rates up to 120 kbit/s, it can carry diagnostic commands and status data between a controller and a service terminal without requiring a separate negative power rail. The ±15 kV HBM protection on the RS-232 connection pins adds useful handling margin for industrially deployed equipment. In implementation, place the device near the DB9 or equivalent connector, keep the protected line traces short, provide solid chassis-to-logic grounding, and include local bypass capacitance on the +5 V supply.

🖥️

Point-of-Sale Equipment

The MAX202ECSE+T can bridge legacy POS peripherals that use RS-232 while keeping the host electronics powered from +5 V. Two transmitters and two receivers support bidirectional command and status traffic without external level-shifter components, while the integrated charge pump supplies the bipolar line voltages internally. Its 120 kbit/s capability is more than adequate for receipt printers, scales, card readers, and service terminals operating at conventional serial-port rates. For a compact POS product, the 16-pin narrow SOIC footprint reduces board area, while the ±15 kV HBM rating helps protect exposed connector pins during routine installation and servicing.

🔧

Instrumentation Control Link

The MAX202ECSE+T supports control and measurement links between laboratory or industrial instruments and a computer or embedded controller. EIA/TIA-232E and V.28 operation, together with two drivers and two receivers, allows bidirectional command exchange over a cable, and the integrated charge pump avoids a separate negative supply in the instrument. Data rates up to 120 kbit/s suit configuration downloads, status polling, and low-bandwidth measurement records rather than high-volume sensor streaming. Place the transceiver near the connector, maintain a continuous signal-ground return, and isolate chassis noise so that switching supplies or high-energy test circuits do not distort the bipolar receive signal.

🧩

Embedded Legacy Port Support

The MAX202ECSE+T lets a modern embedded controller retain compatibility with equipment that still exposes an RS-232 port. A single +5 V rail powers the IC, and its integrated charge pump creates the negative driver voltage needed by legacy equipment, simplifying system partitioning around modern 3.3 V controllers. The two-driver, two-receiver arrangement supports command, response, and handshake lines, while operation up to 120 kbit/s covers many configuration protocols. The narrow 16-pin SOIC package is useful when an existing PCB already uses that footprint. Confirm logic-level compatibility, enable polarity, and the precise receiver-enable requirements before assigning controller GPIOs.

🌐

Network Equipment Management

The MAX202ECSE+T can provide a management-only RS-232 channel in network appliances, telecom equipment, and access hardware that still uses a local service port. The interface delivers up to 120 kbit/s with one +5 V supply, allowing a management processor to issue console commands and read diagnostic information while the main equipment uses faster or more integrated connectivity. Two receivers and two drivers are useful where the protocol uses separate transmit, receive, and handshake signals. The ±15 kV HBM protection rating is advantageous because service connectors are frequently accessible during installation. Use a dedicated connector ground, maintain appropriate creepage and clearance, and avoid routing charge-pump return current through sensitive measurement grounds.

💻

Legacy Computer Serial Port

The MAX202ECSE+T is appropriate for adding a compact RS-232 service or peripheral port to legacy computer and controller hardware. Its two line drivers and two line receivers support a complete bidirectional serial arrangement, while the integrated charge pump eliminates the external negative supply and charge-pump capacitors commonly associated with older RS-232 implementations. Support for data rates up to 120 kbit/s covers standard serial peripherals and legacy BIOS or service interfaces. The 16-pin narrow SOIC package allows implementation on space-constrained boards, but the designer must verify the enable function, logic thresholds, and line-driver slew behavior against the system requirements. Add protection and grounding appropriate to the external connector environment.

What is the MAX202ECSE+T?
The MAX202ECSE+T is a single-supply, +5 V RS-232 transceiver containing two line drivers, two line receivers, an integrated dual charge pump, and ±15 kV ESD protection. According to the Analog Devices MAX202E family datasheet, it supports data rates up to 120 kbit/s and is packaged in a 16-pin narrow SOIC. The integrated charge pump generates the negative voltage needed by the RS-232 drivers, so the interface requires only a +5 V supply.
What is the operating voltage of MAX202ECSE+T?
The MAX202ECSE+T operates from a single +5 V supply. The Analog Devices MAX202E family description identifies the MAX202 as an RS-232 and V.28 transceiver with integrated charge-pump circuitry for single +5 V operation. That supply requirement applies to the logic-side supply, while the external RS-232 driver outputs use internally generated positive and negative bipolar voltage levels.
What is the maximum data rate of MAX202ECSE+T?
The MAX202ECSE+T supports serial data rates up to 120 kbit/s. According to the Analog Devices MAX202 product information, the device maintains EIA/TIA-232E output levels above 120 kbit/s when loaded in accordance with the interface specification. Practical throughput may also be limited by the connected equipment, cable characteristics, clocking method, and software protocol.
Where can I download the MAX202ECSE+T datasheet PDF?
The official MAX202 datasheet and product information are available from Analog Devices at https://www.analog.com/en/products/max202.html. That manufacturer page links the device documentation and identifies the MAX202E family as a +5 V RS-232 and V.28 transceiver with integrated charge-pump circuitry and ±15 kV ESD protection. Use the MAX202E datasheet for the exact pin description, electrical characteristics, and application guidance.
Where is the MAX202ECSE+T pinout?
The MAX202ECSE+T pinout is documented in the manufacturer MAX202E datasheet under the pin-description and package drawings. The component uses a 16-pin narrow SOIC package with two drivers, two receivers, supply and ground connections, and charge-pump-related pins. Use the datasheet pin table when assigning PCB nets and do not infer connections from a generic RS-232 transceiver symbol.
What is the MAX202ECSE+T ESD protection level?
The MAX202ECSE+T provides ±15 kV human-body-model ESD protection on its RS-232 line-interface pins. According to the Analog Devices MAX202E family description, protection extends across the serial-port connection pins, including ground. This rating addresses electrostatic discharge events on exposed communication lines, but it does not remove the need for suitable chassis grounding and cable installation practices.
Can MAX202ECSE+T replace a MAX202ICSE+?
The MAX202ECSE+T can serve as the +5 V RS-232 interface option in designs using a 16-pin MAX202-family SOIC footprint, but the exact E and I variant functions must be checked before replacement. The MAX202ECSE+T provides two drivers and two receivers with an enable function, while shutdown and receiver behavior differ among E, I, and C suffixes. Confirm the complete pin table and operating mode in the manufacturer datasheet before approving a substitution.
MAX202ECSE+T vs MAX202ICSE+ - which is better?
The MAX202ECSE+T is preferable when a design needs the E-variant enable function, while the MAX202ICSE+ is preferable when its shutdown and receiver arrangement matches the existing circuit more closely. Both are identified in cross-reference results as 16-pin SOIC RS-232 devices with a +5 V architecture. The decisive comparison is functional pin behavior, not package appearance; verify enable, shutdown, and receiver connections against the manufacturer datasheets.
When should I choose MAX202ECSE+T over MAX202CSE?
Choose the MAX202ECSE+T when the design specifically benefits from the E-variant enable control and the associated MAX202E function set. Choose the MAX202CSE when its no-enable interface matches the circuit and simpler control arrangement is preferred. Both families use a 16-pin narrow SOIC format, so the decision should be based on enable, shutdown, receiver, and application requirements rather than footprint alone.
Is MAX202ECSE+T suitable for industrial equipment?
The MAX202ECSE+T is suitable for industrial serial interfaces when the operating-temperature, EMC, and qualification requirements of the finished equipment are met. Its ±15 kV HBM protection, EIA/TIA-232E compliance, and operation from one +5 V rail are useful for industrial-console and instrument links. The device itself is not automatically AEC-Q100-qualified, so automotive use requires a separately qualified device.
Where can I buy MAX202ECSE+T online?
Use the Request a Quote form on this page to ask about MAX202ECSE+T availability, lead time, and lot handling. The request can include the required quantity, target date, and whether 16-pin narrow SOIC tape-and-reel packaging is needed. This approach keeps commercial confirmation tied to the exact MAX202ECSE+T order rather than an unqualified family-level part.
What is the price of MAX202ECSE+T?
The current commercial price for MAX202ECSE+T is confirmed through the Request a Quote form on this page. Submit the required quantity and packaging preference so the quote reflects the exact +T tape-and-reel ordering code. No static price should be substituted because component pricing and inventory can change independently of the technical configuration.
What is the lead time and stock status for MAX202ECSE+T?
Request the current lead time and stock status for MAX202ECSE+T through the Request a Quote form on this page. Include your required quantity, delivery date, and approved alternate-source policy in the request. The form allows procurement to confirm availability for the exact MAX202ECSE+T rather than relying on the related MAX202ECSE+ ordering code.
Is MAX202ECSE+T in stock?
Stock for MAX202ECSE+T should be confirmed through the Request a Quote form on this page. Provide the required quantity, date code preference, and packaging requirements to obtain a current allocation response. Because the +T suffix identifies tape-and-reel ordering, request confirmation against the complete MAX202ECSE+T part number.
What can replace MAX202ECSE+T?
The closest replacement candidates include the 16-pin MAX202-family E, I, and C variants and cross-brand 16-pin RS-232 transceivers, provided their enable, shutdown, receiver, and electrical characteristics satisfy the circuit. The MAX202ECSE+T provides two drivers, two receivers, ±15 kV HBM protection, and operation up to 120 kbit/s. A mechanically similar part is not automatically a drop-in replacement, so review every connected pin and operating condition before substitution.
What are the key specifications of MAX202ECSE+T that engineers should know?
The MAX202ECSE+T combines two drivers, two receivers, a single +5 V supply, integrated charge-pump circuitry, ±15 kV HBM ESD protection, and operation up to 120 kbit/s in a 16-pin narrow SOIC. According to the Analog Devices MAX202E datasheet, its drivers meet EIA/TIA-232E and V.28 interface requirements. The essential design checks are supply voltage, enable behavior, logic levels, data direction, line protection, and connector grounding.

Données de référence d'ingénierie pour MAX202ECSE+T — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the MAX202ECSE+T when a new design needs a 16-pin narrow SOIC RS-232 interface operating from +5 V, with two drivers, two receivers, an integrated charge pump, operation up to 120 kbit/s, and ±15 kV HBM protection. The E-variant enable function is useful when the system requires controlled transmitter or receiver activity. Select MAX202ICSE+ when its shutdown arrangement matches the design, or MAX202CSE when the simpler C-variant control is preferred. MAX202IDG4 and MAX202EESE are alternatives within the MAX202 family, but their ordering codes and control behavior require a pin-table review. MAX232ECSE+T adds different driver-enable and receiver-control functions, while ADM202JRNZ offers a cross-brand option. In every case, confirm package dimensions, enable polarity, logic levels, receiver thresholds, and connector protection before PCB release.

Comparaison avec les alternatives

Paramètre Ce produit MAX202ICSE+ MAX202CSE MAX202EESE MAX202IDG4 MAX232ECSE+T ADM202JRNZ
Package 16-pin narrow SOIC 16-pin narrow SOIC 16-pin narrow SOIC 16-pin narrow SOIC 16-pin narrow SOIC 16-pin narrow SOIC 16-pin narrow SOIC
Brand Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated Analog Devices
Transceiver Configuration 2/2 full-duplex RS-232 2/2 RS-232 transceiver 2/2 RS-232 transceiver 2/2 RS-232 transceiver 2/2 RS-232 transceiver 2/2 RS-232 transceiver 2/2 RS-232 transceiver
Supply Voltage +5 V +5 V +5 V +5 V +5 V +5 V +5 V
Maximum Data Rate 120 kbit/s 120 kbit/s 120 kbit/s 120 kbit/s 120 kbit/s 120 kbit/s 120 kbit/s
Charge-Pump Architecture Integrated dual charge pump Integrated charge pump Integrated charge pump Integrated charge pump Integrated charge pump Integrated charge pump Integrated charge pump
Enable and Shutdown Control E-variant enable arrangement I-variant shutdown arrangement C-variant control arrangement E-variant control arrangement with different ordering code I-variant arrangement MAX232 driver-enable and receiver-control arrangement Shutdown and receiver-control arrangement
Interface Standards EIA/TIA-232E and V.28 EIA/TIA-232E and V.28 EIA/TIA-232E and V.28 EIA/TIA-232E and V.28 EIA/TIA-232E and V.28 EIA/TIA-232E and V.28 RS-232 and V.28

Principaux différenciateurs

  • Provides the E-variant enable function within a compact 16-pin narrow SOIC (vs MAX202CSE)
  • Maintains a 120 kbit/s interface rate with integrated charge-pump operation (vs ADM202JRNZ)
  • Offers ±15 kV HBM protection on exposed RS-232 connection pins (vs MAX202IDG4)

Notes de conception

Place the MAX202ECSE+T close to the RS-232 connector and route the protected driver and receiver nets as short, direct paths. Keep the connector ground and logic ground connected according to the product grounding strategy, and avoid routing protected serial lines beneath high-current switching nodes. A short interface path also limits radiated emissions and reduces susceptibility to ESD-coupled events when the cable is attached or disconnected.

Decouple the +5 V supply close to the transceiver with the capacitance and voltage rating recommended in the manufacturer datasheet. Keep charge-pump current paths compact and isolate them from sensitive analog or reference grounds. Because the integrated charge pump generates switch currents internally, stable local supply voltage is important for stable receiver thresholds and compliant driver output levels under data activity.

Do not treat identical SOIC packages as sufficient proof of interchangeability. Compare every pin, including enable, shutdown, receiver-enable, charge-pump, and ground connections, because MAX202E, MAX202I, MAX202C, MAX232, and ADM202 options can assign those functions differently. Also verify logic thresholds against the controller’s supply voltage and check whether the design requires fail-safe receiver behavior during reset.

Use the manufacturer’s recommended charge-pump capacitor values and keep those components close to their associated pins. Avoid extending the charge-pump traces, and place the transceiver away from precision measurement inputs where practical. A common signal-ground reference helps control return current, while proper chassis grounding and connector design remain important because the ±15 kV HBM rating does not replace external surge or lightning protection.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The MAX202E family meets EIA/TIA-232E and CCITT V.28 interface requirements. RoHS, REACH, lead-free, halogen-free, and conflict-mineral statuses require confirmation from the current manufacturer product documentation.

Données vérifiées le : 2026-11-17 — données vérifiées et sélectionnées par l'équipe d'ingénierie composants de XAIPART

Recherches associées

MAX202ECSE+T datasheet MAX202ECSE+T specifications MAX202ECSE+T pinout MAX202ECSE+T datasheet pdf MAX202ECSE+T price MAX202ECSE+T stock MAX202ECSE+T equivalent MAX202ECSE+T replacement MAX202ECSE+T vs MAX202ICSE+ MAX202ECSE+T application circuit MAX202ECSE+T SOIC-16 footprint Maxim Integrated MAX202ECSE+T

Composants & termes associés

Maxim Integrated MAX202ECSE+T MAX202 MAX202E RS-232 transceiver line driver line receiver interface IC charge-pump voltage converter EIA/TIA-232E CCITT V.28 RS-232 ±15 kV HBM ESD protection 120 kbit/s +5 V supply 16-pin narrow SOIC SOIC package family surface-mount device industrial serial console point-of-sale equipment instrumentation control legacy serial port EMI bipolar line signaling
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ