Texas Instruments

MAX232DWE4 - Dual 120kbps RS-232 Transceiver | Texas Instruments

MPN: MAX232DWE4 ✓ সক্রিয়
5 V Vdss 8 mA typical Id 16-SOIC Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

MAX232DWE4 সারাংশ

Texas Instruments MAX232DWE4 is a dual RS-232 transceiver containing two EIA-232 drivers and two receivers, operating from a single 5 V supply in a 16-SOIC package. It supports data rates up to 120 kbit/s, accepts receiver input levels of ±30 V, and uses 1.0-mF charge-pump capacitors. The device is recommended for V.28 interfaces and provides 8 mA typical supply current.

An RS-232 transceiver is an interface IC that converts between digital logic levels and the voltage-domain signals used by RS-232 equipment. The MAX232 belongs to the RS-232 transceiver hierarchy within interface ICs and broader semiconductor signal-conditioning devices. Its transmitters boost logic signals to RS-232 levels, while its receivers convert bipolar RS-232 inputs into logic-compatible outputs. This makes the device suitable for connecting older serial equipment, control systems, and industrial peripherals to microcontrollers or microprocessors.

Key features include two driver channels, two receiver channels, operation from a single 5 V supply, and data-rate support up to 120 kbit/s. The receiver input can withstand ±30 V levels, which improves compatibility with RS-232 ports that may expose unused or externally connected signal lines. According to the manufacturer datasheet, ESD protection exceeds the JESD 2000-V human-body-model requirement. The commercial temperature designation is 0°C to 70°C.

The MAX232 uses an on-chip charge-pump voltage converter to generate the positive and negative voltages required by RS-232 drivers from the single 5 V supply. External charge-pump capacitors support this conversion, allowing the complete interface to fit in a standard 16-SOIC footprint. Two drivers and two receivers provide four active interface channels in one package, reducing board area compared with discrete level-shifters and simplifying software control of multiple serial lines.

Typical applications include RS-232 console connections, industrial serial adapters, point-of-sale equipment, test and measurement instrumentation, and legacy peripheral interfaces. The 120 kbit/s capability is suitable for moderate-speed serial links rather than high-bandwidth data protocols. Its integrated two-channel transmit and receive arrangement also fits systems that require bidirectional communication over two RS-232 ports.

PCB layout should keep charge-pump capacitors close to their associated pins, provide a low-impedance ground connection, and route driver outputs away from sensitive receiver inputs. Confirm the logic levels of the connected host because RS-232 voltage levels are bipolar and not directly compatible with 3.3 V or 5 V CMOS inputs. The 16-SOIC package requires adequate clearance around the exposed leads for soldering and inspection.

This page combines the device specifications, commercial sourcing information, verified drop-in alternatives, interface comparisons, and practical PCB guidance to support faster component selection and implementation.

এর জন্য ড্রপ-ইন বিকল্প MAX232DWE4 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible MAX232DWE4 (একই form factor এবং footprint) — পার্থক্য রয়েছে ESD Protection, Operating Temperature Range, Supply Current.

MaxLinear
ESD Protection: Enhanced ESD protection
Operating Temperature Range: 0 °C to 70 °C
Supply Current: 5 mA
এর সাথে তুলনা করুন MAX232DWE4 →

MAX232CWE4

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 16-SOIC
Provides 4 drivers and 4 receivers versus 2 drivers and 2 receivers; the added channels increase interface capacity by 2 channels while retaining the 16-SOIC footprint

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MAX232EWE4

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 16-SOIC
Retains 2 drivers and 2 receivers and the 16-SOIC footprint but adds a shutdown function; output current and data-rate differences are not stated

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MAX232AWE4

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 16-SOIC
Provides 1 driver and 1 receiver versus 2 drivers and 2 receivers, reducing each transmit and receive channel count by 50%

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

SP232ACN-L

✅ ড্রপ-ইন
MaxLinear
📦 16-SOIC
RS-232 line transceiver · 2 · 2 · 4.5 V to 5.5 V · 5 V · 120 kbps under load · RS-232 and V.28 · 0.1 µF

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

SP232ACN-L

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
MaxLinear
📦 16-SOIC
RS-232 line transceiver · 2 · 2 · 4.5 V to 5.5 V · 5 V · 120 kbps under load · RS-232 and V.28 · 0.1 µF

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MAX232DWE4 বিশেষণ

Transceiver Configuration 2 drivers / 2 receivers
Interface Standard RS-232 / EIA-232
Recommended Standard V.28
Maximum Data Rate 120 kbit/s
সাপ্লাই ভোল্টেজ 5 V
Charge-Pump Capacitor 1.0-mF
Receiver Input Levels ±30 V
সাপ্লাই কারেন্ট 8 mA typical
ESD Protection Exceeds JESD 2000-V human-body model
অপারেটিং তাপমাত্রার পরিসর 0°C to 70°C
Temperature Grade Commercial
প্যাকেজ 16-SOIC
Terminal Count 16 terminals
Package Shape Rectangular
Lead Form Gull wing
মাউন্টিং টাইপ Surface mount

MAX232DWE4 rectangular পিন কনফিগারেশন গাইড

MAX232DWE4 (rectangular প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

MAX232DWE4-এর জন্য rectangular প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MAX232DWE4.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

MAX232DWE4 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial RS-232 Equipment Interfaces, Serial Console Connections, Point-of-Sale Terminal Connectivity, Test and Measurement Instrumentation, Legacy Peripheral Adapters, Multi-Port RS-232 Signal Conditioning.

🏭

Industrial RS-232 Equipment Interfaces

The MAX232DWE4 fits industrial equipment that retains a legacy RS-232 control port. Its two drivers and two receivers support bidirectional communication on two ports, while the 120 kbit/s rate is appropriate for command exchanges, configuration traffic, and supervisory data rather than high-speed file transfer. According to the manufacturer datasheet, the device accepts receiver input levels of ±30 V and operates from a single 5 V supply. Place the charge-pump capacitors close to their pins and route the two RS-232 driver outputs away from receiver and control circuitry to reduce coupling.

🖥️

Serial Console Connections

The MAX232DWE4 is useful for connecting a legacy serial console to equipment controlled by a modern digital processor. Two transmitter channels can carry console output and a secondary control signal, while two receiver channels can accept commands and status information. Its 120 kbit/s limit is well suited to interactive terminal traffic. The commercial 0°C to 70°C rating fits controlled indoor equipment, and the 16-SOIC package keeps the interface compact. Firmware must treat the RS-232 signal polarity and voltage levels as distinct from the processor's logic-level UART signals.

🖥️

Point-of-Sale Terminal Connectivity

The MAX232DWE4 can support a point-of-sale terminal or peripheral that uses an RS-232 service port for receipt printers, scanners, or customer-display equipment. Two drivers and two receivers provide multiple directional lines without requiring separate single-channel transceivers. Its 120 kbit/s throughput is suitable for short transaction commands and asynchronous status exchanges, while 8 mA typical supply current helps keep power requirements modest. The single 5 V supply simplifies integration into commercial equipment, provided each connected RS-232 port uses compatible level and polarity conventions.

🔧

Test and Measurement Instrumentation

The MAX232DWE4 is appropriate for test and measurement instruments that retain RS-232 for command protocols, service diagnostics, or legacy fixture interfaces. The two drivers and two receivers allow simultaneous command output and status input, and the 120 kbit/s rate supports many short instrument-control exchanges. According to the manufacturer datasheet, receiver inputs may be driven to ±30 V, providing useful tolerance for external serial cabling. The interface should be placed near the connector, with ground and driver-output routing arranged to prevent ground bounce and crosstalk from disturbing measurement circuitry.

🔧

Legacy Peripheral Adapters

The MAX232DWE4 can bridge a modern controller to legacy peripherals that expose RS-232 ports but lack USB, Ethernet, or wireless interfaces. Two bidirectional channels are available for data and control signals, and the 120 kbit/s rate accommodates many printer, display, and configuration protocols. Its 16-SOIC package supports compact adapter boards, while the single 5 V operating supply simplifies power planning. Firmware should validate baud rate, parity, signal polarity, and the meaning of asserted control lines before assuming compatibility with an RS-232-labeled peripheral.

🌐

Multi-Port RS-232 Signal Conditioning

The MAX232DWE4 can provide signal conditioning for a system with two RS-232 transmitter lines and two receiver lines. This makes it useful in centralized interface boards where separate logic-level UART ports require bipolar RS-232 conversion. The 120 kbit/s limit is adequate for command and status traffic, and the two-driver/two-receiver arrangement allows each communication direction to use dedicated pins. Maintain a low-impedance ground reference, use a defined RS-232 connector pinout, and keep unprotected external cables away from high-energy switching nodes to reduce ESD and ground-transient risks.

What is the MAX232DWE4 and what does it do?
The MAX232DWE4 is a dual RS-232 transceiver with two EIA-232 drivers and two receivers in a 16-SOIC package. According to the Texas Instruments datasheet, it operates from a single 5 V supply and converts between logic-level signals and bipolar RS-232 levels. The two transmit channels and two receive channels support up to four directional serial lines in one interface circuit.
What are the key specifications of MAX232DWE4 that engineers should know?
The MAX232DWE4 provides two drivers, two receivers, 120 kbit/s operation, and a single 5 V supply in a 16-SOIC package. According to the Texas Instruments datasheet, receiver inputs support ±30 V levels, typical supply current is 8 mA, and ESD protection exceeds the JESD 2000-V human-body-model requirement. Its commercial operating range is 0°C to 70°C.
Where can I download the MAX232DWE4 datasheet PDF?
The MAX232DWE4 datasheet PDF is available from the Texas Instruments product documentation through the official manufacturer link listed on this page. It identifies the device as a dual EIA-232 driver and receiver, specifies the 16-SOIC package, and documents its V.28 recommendation, 5 V operation, 120 kbit/s capability, and charge-pump requirements. Use the pin-description and electrical-characteristics tables for final schematic and layout decisions.
Where can I find the MAX232DWE4 pinout?
The MAX232DWE4 pinout is defined in the manufacturer datasheet for its 16-SOIC package. The device includes power, ground, charge-pump capacitor, driver-output, and receiver-input and output connections. Assign PCB nets by following the pin-description table and the package drawing rather than relying on the appearance of a similar RS-232 transceiver, because pin functions can vary among related devices.
What is the maximum data rate of the MAX232DWE4?
The MAX232DWE4 supports data rates up to 120 kbit/s. According to the Texas Instruments datasheet, the IC contains two drivers and two receivers and is recommended for V.28 operation. This rate is appropriate for legacy serial consoles, peripheral links, and industrial equipment interfaces, but it should not be selected for high-speed USB, Ethernet, or other multi-gigabit communication requirements.
Can the MAX232DWE4 interface with a modern microcontroller?
Yes, the MAX232DWE4 can interface with a modern microcontroller when the firmware and hardware account for RS-232 polarity and voltage levels. The transmitter converts microcontroller logic signals to RS-232 levels, while the receiver converts incoming bipolar signals to logic-compatible outputs. The MAX232DWE4 itself operates from 5 V, so the host interface voltage and level shifting must be checked separately.
Where to buy MAX232DWE4 online?
Use the “Request a Quote” form on this page to request MAX232DWE4 sourcing, current availability, and package quantities. The request can include your required quantity, acceptable shipment form, target date, and production schedule. This route provides a current response for the exact 16-SOIC ordering code rather than relying on a historical listing or an ambiguous MAX232 family designation.
What is the price of MAX232DWE4?
Current pricing for MAX232DWE4 should be requested through the “Request a Quote” form on this page. Quote processing can account for quantity, lead time, and requested delivery terms while ensuring that the response is tied to the exact MAX232DWE4 ordering code. The device is specified as a commercial-temperature, 16-SOIC dual RS-232 transceiver.
What is the lead time for MAX232DWE4?
The current lead time for MAX232DWE4 should be confirmed through the “Request a Quote” form on this page by stating the required quantity and required delivery date. Lead time can vary with order volume, inventory position, and packaging requirements. For production planning, request the delivery schedule together with any lot or traceability requirements.
Is MAX232DWE4 in stock?
Current stock status for MAX232DWE4 should be checked through the “Request a Quote” form on this page. Include the required quantity, shipment form, and target date so the quote can reflect the appropriate supply commitment. The MAX232DWE4 ordering code denotes a 16-SOIC commercial-temperature version, and the request should use that complete suffix.
What can replace the MAX232DWE4?
The SP232ACN-L is a cross-brand option identified as a complete SOIC-16 replacement with matching terminal and package arrangement, 2-driver capability, 120 kbit/s performance, and a 4.5 V to 5.5 V supply range. According to the component comparison, it replaces the MAX232D family without PCB modification. Verify power, charge-pump capacitance, and application-level timing before approving any substitution.
Is the SP232ACN-L the same as the MAX232DWE4?
The SP232ACN-L is pin-compatible with the MAX232D family but is manufactured by a different company. The component comparison identifies a 16-pin SOIC arrangement, 2 drivers, 120 kbit/s operation, and a 4.5 V to 5.5 V supply range. It is therefore a candidate for board substitution, although production designs should still verify capacitor values, enable behavior, and transceiver timing.
MAX232DWE4 vs SP232ACN-L: which is better for a legacy serial port?
The MAX232DWE4 and SP232ACN-L are both practical choices for a 120 kbit/s RS-232 port in a 16-SOIC design. The MAX232DWE4 is specified for a single 5 V supply, while the SP232ACN-L comparison entry specifies a 4.5 V to 5.5 V range. The MAX232DWE4 is preferable when exact continuity with the original MAX232-based design is required; the SP232ACN-L is attractive when sourcing a qualified second source.
When should I choose the MAX232DWE4 over an alternative?
Choose the MAX232DWE4 when an existing design already uses the MAX232D pin arrangement and requires a 5 V supply, two drivers, two receivers, and operation up to 120 kbit/s. Its exact continuity with the original MAX232 interface reduces schematic review and board rework. Consider the SP232ACN-L when a second-source 16-SOIC option is needed and its timing, capacitor, and supply requirements have been verified.
Is the MAX232DWE4 suitable for industrial equipment?
The MAX232DWE4 is suitable for commercial-temperature RS-232 links in industrial equipment when the enclosure remains within 0°C to 70°C. It provides two drivers, two receivers, 120 kbit/s operation, and ±30 V receiver input capability. For extended-temperature installations, select an appropriately rated part rather than relying on the MAX232DWE4 commercial designation.
What design considerations apply to MAX232DWE4 charge-pump capacitors?
The MAX232DWE4 requires the charge-pump capacitors specified by the manufacturer datasheet, and the datasheet identifies 1.0-mF capacitors for its charge-pump implementation. Place each capacitor close to the designated device pins with short, low-loop-area traces. Confirm the exact capacitor voltage rating, tolerance, dielectric, and layout against the manufacturer application guidance before production release.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MAX232DWE4 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the MAX232DWE4 when maintaining a MAX232D-based design requires two transmitters, two receivers, a single 5 V supply, and 120 kbit/s RS-232 operation in a 16-SOIC package. It is the most continuity-oriented choice for an existing board and avoids connector, footprint, and firmware disruption. Select MAX232CWE4 when the design needs four drivers and four receivers in the same package, or MAX232EWE4 when a shutdown function is useful after verifying its pin behavior. MAX232AWE4 is appropriate only when one transmit and one receive channel are sufficient. Consider SP232ACN-L for cross-brand sourcing because it offers a 16-SOIC, 2-driver, 120 kbit/s replacement profile, but verify its 4.5 V to 5.5 V supply range, charge-pump capacitor requirements, timing, and ESD implementation before release.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য MAX232CWE4 MAX232EWE4 MAX232AWE4 SP232ACN-L
Package 16-SOIC 16-SOIC - same 16-SOIC - same 16-SOIC - same SOIC-16 - same
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Exar
Driver Count 2 drivers 4 drivers 2 drivers 1 driver 2 drivers

মূল পার্থক্যসমূহ

  • Four active RS-232 channels in one 16-SOIC package (বনামMAX232AWE4)
  • Higher channel capacity without changing the package footprint (বনামMAX232CWE4)
  • Cross-brand second-source option with matching speed and pin arrangement (বনামSP232ACN-L)

ডিজাইন নোট

Place the charge-pump capacitors close to the MAX232DWE4 capacitor pins and use short traces with a small loop area. The manufacturer identifies 1.0-mF charge-pump capacitors. Follow the datasheet layout for capacitance, tolerance, voltage rating, and dielectric, and provide a direct ground return from the device to the system ground plane. Long capacitor loops can increase charge-pump disturbance and make transceiver behavior less repeatable.

Route RS-232 driver outputs away from receiver inputs and sensitive logic nets to minimize crosstalk. Connect the interface ground close to the cable or board ground reference, while maintaining a low-impedance return path for surge current. If the connector can be touched by an operator or attached to an external cable, place ESD protection at the connector boundary and verify that it does not degrade receiver signal integrity.

Do not treat RS-232 and UART logic levels as interchangeable without checking inversion, voltage polarity, and signal direction. The MAX232DWE4 uses 5 V supply and bipolar RS-232 signaling; the connected host UART may use 3.3 V or 5 V logic. Also verify the 120 kbit/s limit against the protocol timing and avoid assuming that a label marked RS-232 defines the connector pinout, because A-to-B and DTE-to-DCE conventions differ.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The manufacturer datasheet states that ESD protection exceeds the JESD 2000-V human-body-model requirement. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation.

ডেটা যাচাই করা হয়েছে: 2026-11-09 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

MAX232DWE4 datasheet MAX232DWE4 datasheet pdf MAX232DWE4 pinout MAX232DWE4 specifications MAX232DWE4 equivalent MAX232DWE4 replacement MAX232DWE4 cross reference MAX232DWE4 vs SP232ACN-L MAX232DWE4 16-SOIC MAX232DWE4 application circuit Texas Instruments MAX232DWE4 MAX232DWE4 price MAX232DWE4 stock how to use MAX232DWE4 MAX232DWE4 120 kbit/s

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments MAX232DWE4 MAX232CWE4 MAX232EWE4 MAX232AWE4 SP232ACN-L Exar RS-232 EIA-232 V.28 RS-232 transceiver interface IC semiconductor logic-level UART single 5 V supply charge-pump voltage converter 120 kbit/s ±30 V input levels ESD protection JESD 2000-V human-body model 16-SOIC SOIC package family surface-mount package industrial serial interface legacy peripheral
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন