MAX232DWE4 - Dual 120kbps RS-232 Transceiver | Texas Instruments
料号: MAX232DWE4 ✓ 量产中MAX232DWE4 概述
An RS-232 transceiver is an interface IC that converts between digital logic levels and the voltage-domain signals used by RS-232 equipment. The MAX232 belongs to the RS-232 transceiver hierarchy within interface ICs and broader semiconductor signal-conditioning devices. Its transmitters boost logic signals to RS-232 levels, while its receivers convert bipolar RS-232 inputs into logic-compatible outputs. This makes the device suitable for connecting older serial equipment, control systems, and industrial peripherals to microcontrollers or microprocessors.
Key features include two driver channels, two receiver channels, operation from a single 5 V supply, and data-rate support up to 120 kbit/s. The receiver input can withstand ±30 V levels, which improves compatibility with RS-232 ports that may expose unused or externally connected signal lines. According to the manufacturer datasheet, ESD protection exceeds the JESD 2000-V human-body-model requirement. The commercial temperature designation is 0°C to 70°C.
The MAX232 uses an on-chip charge-pump voltage converter to generate the positive and negative voltages required by RS-232 drivers from the single 5 V supply. External charge-pump capacitors support this conversion, allowing the complete interface to fit in a standard 16-SOIC footprint. Two drivers and two receivers provide four active interface channels in one package, reducing board area compared with discrete level-shifters and simplifying software control of multiple serial lines.
Typical applications include RS-232 console connections, industrial serial adapters, point-of-sale equipment, test and measurement instrumentation, and legacy peripheral interfaces. The 120 kbit/s capability is suitable for moderate-speed serial links rather than high-bandwidth data protocols. Its integrated two-channel transmit and receive arrangement also fits systems that require bidirectional communication over two RS-232 ports.
PCB layout should keep charge-pump capacitors close to their associated pins, provide a low-impedance ground connection, and route driver outputs away from sensitive receiver inputs. Confirm the logic levels of the connected host because RS-232 voltage levels are bipolar and not directly compatible with 3.3 V or 5 V CMOS inputs. The 16-SOIC package requires adequate clearance around the exposed leads for soldering and inspection.
This page combines the device specifications, commercial sourcing information, verified drop-in alternatives, interface comparisons, and practical PCB guidance to support faster component selection and implementation.
直接替换替代料: MAX232DWE4 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: MAX232DWE4 (相同外形与封装尺寸) ——差异在于 ESD Protection, Operating Temperature Range, Supply Current.
MAX232CWE4
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
MAX232EWE4
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
MAX232AWE4
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
SP232ACN-L
✅ 直接替换联系询价
查看数据手册 →SP232ACN-L
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →MAX232DWE4 规格参数
| Transceiver Configuration | 2 drivers / 2 receivers |
| Interface Standard | RS-232 / EIA-232 |
| Recommended Standard | V.28 |
| Maximum Data Rate | 120 kbit/s |
| 电源电压 | 5 V |
| Charge-Pump Capacitor | 1.0-mF |
| Receiver Input Levels | ±30 V |
| 电源电流 | 8 mA typical |
| ESD Protection | Exceeds JESD 2000-V human-body model |
| 工作温度范围 | 0°C to 70°C |
| Temperature Grade | Commercial |
| 封装 | 16-SOIC |
| Terminal Count | 16 terminals |
| Package Shape | Rectangular |
| Lead Form | Gull wing |
| 安装类型 | Surface mount |
MAX232DWE4 rectangular 引脚配置指南
MAX232DWE4(rectangular 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: MAX232DWE4.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MAX232DWE4 适用于 6 应用s: Industrial RS-232 Equipment Interfaces, Serial Console Connections, Point-of-Sale Terminal Connectivity, Test and Measurement Instrumentation, Legacy Peripheral Adapters, Multi-Port RS-232 Signal Conditioning.
Industrial RS-232 Equipment Interfaces
The MAX232DWE4 fits industrial equipment that retains a legacy RS-232 control port. Its two drivers and two receivers support bidirectional communication on two ports, while the 120 kbit/s rate is appropriate for command exchanges, configuration traffic, and supervisory data rather than high-speed file transfer. According to the manufacturer datasheet, the device accepts receiver input levels of ±30 V and operates from a single 5 V supply. Place the charge-pump capacitors close to their pins and route the two RS-232 driver outputs away from receiver and control circuitry to reduce coupling.
推荐
Serial Console Connections
The MAX232DWE4 is useful for connecting a legacy serial console to equipment controlled by a modern digital processor. Two transmitter channels can carry console output and a secondary control signal, while two receiver channels can accept commands and status information. Its 120 kbit/s limit is well suited to interactive terminal traffic. The commercial 0°C to 70°C rating fits controlled indoor equipment, and the 16-SOIC package keeps the interface compact. Firmware must treat the RS-232 signal polarity and voltage levels as distinct from the processor's logic-level UART signals.
推荐
Point-of-Sale Terminal Connectivity
The MAX232DWE4 can support a point-of-sale terminal or peripheral that uses an RS-232 service port for receipt printers, scanners, or customer-display equipment. Two drivers and two receivers provide multiple directional lines without requiring separate single-channel transceivers. Its 120 kbit/s throughput is suitable for short transaction commands and asynchronous status exchanges, while 8 mA typical supply current helps keep power requirements modest. The single 5 V supply simplifies integration into commercial equipment, provided each connected RS-232 port uses compatible level and polarity conventions.
推荐
Test and Measurement Instrumentation
The MAX232DWE4 is appropriate for test and measurement instruments that retain RS-232 for command protocols, service diagnostics, or legacy fixture interfaces. The two drivers and two receivers allow simultaneous command output and status input, and the 120 kbit/s rate supports many short instrument-control exchanges. According to the manufacturer datasheet, receiver inputs may be driven to ±30 V, providing useful tolerance for external serial cabling. The interface should be placed near the connector, with ground and driver-output routing arranged to prevent ground bounce and crosstalk from disturbing measurement circuitry.
推荐
Legacy Peripheral Adapters
The MAX232DWE4 can bridge a modern controller to legacy peripherals that expose RS-232 ports but lack USB, Ethernet, or wireless interfaces. Two bidirectional channels are available for data and control signals, and the 120 kbit/s rate accommodates many printer, display, and configuration protocols. Its 16-SOIC package supports compact adapter boards, while the single 5 V operating supply simplifies power planning. Firmware should validate baud rate, parity, signal polarity, and the meaning of asserted control lines before assuming compatibility with an RS-232-labeled peripheral.
推荐
Multi-Port RS-232 Signal Conditioning
The MAX232DWE4 can provide signal conditioning for a system with two RS-232 transmitter lines and two receiver lines. This makes it useful in centralized interface boards where separate logic-level UART ports require bipolar RS-232 conversion. The 120 kbit/s limit is adequate for command and status traffic, and the two-driver/two-receiver arrangement allows each communication direction to use dedicated pins. Maintain a low-impedance ground reference, use a defined RS-232 connector pinout, and keep unprotected external cables away from high-energy switching nodes to reduce ESD and ground-transient risks.
推荐
推荐产品汇总
工程参考数据: MAX232DWE4 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MAX232CWE4 | MAX232EWE4 | MAX232AWE4 | SP232ACN-L |
|---|---|---|---|---|---|
| Package | 16-SOIC | 16-SOIC - same | 16-SOIC - same | 16-SOIC - same | SOIC-16 - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Exar |
| Driver Count | 2 drivers | 4 drivers | 2 drivers | 1 driver | 2 drivers |
关键差异点
- Four active RS-232 channels in one 16-SOIC package (对比 MAX232AWE4)
- Higher channel capacity without changing the package footprint (对比 MAX232CWE4)
- Cross-brand second-source option with matching speed and pin arrangement (对比 SP232ACN-L)
设计说明
Place the charge-pump capacitors close to the MAX232DWE4 capacitor pins and use short traces with a small loop area. The manufacturer identifies 1.0-mF charge-pump capacitors. Follow the datasheet layout for capacitance, tolerance, voltage rating, and dielectric, and provide a direct ground return from the device to the system ground plane. Long capacitor loops can increase charge-pump disturbance and make transceiver behavior less repeatable.
Route RS-232 driver outputs away from receiver inputs and sensitive logic nets to minimize crosstalk. Connect the interface ground close to the cable or board ground reference, while maintaining a low-impedance return path for surge current. If the connector can be touched by an operator or attached to an external cable, place ESD protection at the connector boundary and verify that it does not degrade receiver signal integrity.
Do not treat RS-232 and UART logic levels as interchangeable without checking inversion, voltage polarity, and signal direction. The MAX232DWE4 uses 5 V supply and bipolar RS-232 signaling; the connected host UART may use 3.3 V or 5 V logic. Also verify the 120 kbit/s limit against the protocol timing and avoid assuming that a label marked RS-232 defines the connector pinout, because A-to-B and DTE-to-DCE conventions differ.
合规信息
The manufacturer datasheet states that ESD protection exceeds the JESD 2000-V human-body-model requirement. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation.