Analog Devices

MAX3232CWE+ - 1 Mbps Dual RS-232 Transceiver | Analog Devices

MPN: MAX3232CWE+ ✓ সক্রিয়
3.0 V to 5.5 V Vdss 16-pin SOIC Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

MAX3232CWE+ সারাংশ

The Analog Devices MAX3232CWE+ is a dual RS-232 transceiver containing two drivers and two receivers, operates from 3.0 V to 5.5 V, and supports data rates up to 1 Mbps in a 16-pin SOIC package. Its low-power design operates from a single supply without requiring a separate negative voltage rail.

A transceiver combines the two functional blocks required at one end of an RS-232 link. A driver converts logic-level signals into RS-232 levels, while a receiver converts incoming RS-232 signals back into logic levels. As a true RS-232 interface IC, the MAX3232CWE+ belongs to the interface IC hierarchy alongside line drivers, line receivers, and level-translation devices used in serial communications.

The MAX3232 family uses a dual charge-pump arrangement to generate the bipolar voltage needed for RS-232 transmission while operating from a 3.0 V to 5.5 V supply. The manufacturer product page identifies the MAX3232 as a low-power true RS-232 transceiver with operation up to 1 Mbps. Charge-pump operation eliminates the need for a separate negative supply in equipment that cannot provide the traditional plus-or-minus 12 V RS-232 voltage range.

Analog Devices states that the MAX3232 is pin, package, and functionally compatible with the industry-standard MAX232. The MAX3232 family is suitable for replacing MAX232 designs when a modern low-power implementation is required. The device also supports shutdown operation, which can reduce supply current when the associated communications port is inactive. Its dual-channel arrangement allows two serial ports or two signal directions to share one interface IC.

Typical uses include data acquisition systems, industrial control links, point-of-sale equipment, instrument consoles, and embedded serial communications. The 1 Mbps capability is useful for links that exceed the slower rates of conventional RS-232 transceivers. Because cable length, driver slew rate, receiver threshold, and system grounding strongly influence practical RS-232 performance, PCB layout and external charge-pump capacitors require close attention.

Place the four 0.1 µF charge-pump capacitors close to their associated pins and route the driver outputs and receiver inputs away from sensitive logic. Confirm that the host interface uses the correct logic levels and that unused receiver outputs are handled according to the manufacturer's pin-description table. This page also organizes compatible family options, comparison parameters, and practical PCB guidance for evaluating the MAX3232CWE+ in new and replacement designs.

এর জন্য ড্রপ-ইন বিকল্প MAX3232CWE+ — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible MAX3232CWE+ (একই form factor এবং footprint) — পার্থক্য রয়েছে ESD Protection, Product Type, Mounting Type, Supply Voltage Range, Package.

Texas Instruments
ESD Protection: ±15 kV IEC pin-to-pin
Product Type: RS-232 line-driver and receiver transceiver
Supply Voltage Range: 3 V to 5.5 V
এর সাথে তুলনা করুন MAX3232CWE+ →
Maxim Integrated
ESD Protection: ±15 kV
Product Type: RS-232 transceiver
এর সাথে তুলনা করুন MAX3232CWE+ →
MaxLinear
ESD Protection: 15 kV on RS-232 pins
Mounting Type: Surface mount (SMD/SMT)
Supply Voltage Range: 3 V to 5.5 V

MAX3232EWE+

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 16-SOIC
Same 2-driver and 2-receiver RS-232 architecture with a 0 channel-count difference; specific electrical-grade differences are not quantified in the available documentation.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MAX3232ECWE+

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Maxim Integrated
📦 16-SOIC
RS-232 transceiver · 2 · 2 · Full-duplex · 3.0 V to 5.5 V · 1 Mbps · ±15 kV · Down to 10 nA

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MAX3232ESE+TG035

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Maxim Integrated
📦 16-SOIC
RS-232 Transceiver (2 drivers, 2 receivers) · 3.0 V to 5.5 V · Up to 1 Mbps · 4 x 0.1 uF · -40C to +85C (E grade) · 16-pin SOIC (N)

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MAX3232ECDW

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Texas Instruments
📦 16-SOIC
RS-232 line-driver and receiver transceiver · 3 V to 5.5 V · 2 · 2 · RS-232 · TIA/EIA-232-F · ±15 kV IEC pin-to-pin · Integrated dual charge pump

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MAX3232EWE

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 16-SOIC
Same 2-driver and 2-receiver MAX3232-family interface with a 0 channel-count difference; lead-free and grade differences are not quantified in the available documentation.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

SP3232EBCN-L/TR

✅ ড্রপ-ইন
MaxLinear
📦 16-SOIC
2/2 · Full duplex RS-232 transceiver · 3 V to 5.5 V · 250 kbps under load · 15 kV on RS-232 pins · True EIA/TIA-232-F · On-chip charge pump, single supply · 0.1 uF per pump node

✓ স্টকে আছে

$0.7711 / ইউনিট

ডেটাশিট দেখুন →

MAX3232CWE+ বিশেষণ

Product Type Dual RS-232 transceiver
Number of Drivers 2
Number of Receivers 2
Supply Voltage Range 3.0 V to 5.5 V
Maximum Data Rate 1 Mbps
Interface Standard RS-232
প্যাকেজ 16-pin SOIC
মাউন্টিং টাইপ Surface Mount
External Charge-Pump Capacitors 4 x 0.1 µF

MAX3232CWE+ 16-pin soic পিন কনফিগারেশন গাইড

MAX3232CWE+ (16-pin soic প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

MAX3232CWE+-এর জন্য 16-pin soic প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MAX3232CWE+.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

MAX3232CWE+ এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Control Serial Ports, Data Acquisition Systems, Point-of-Sale and Peripheral Equipment, Instrument Consoles and Test Equipment, Embedded Serial Communication, Legacy RS-232 Equipment Retrofit.

🏭

Industrial Control Serial Ports

The MAX3232CWE+ is well suited to point-to-point control links because it provides two drivers and two receivers in one 16-pin SOIC package. Its 3.0 V to 5.5 V operating range supports both 3.3 V and 5 V industrial logic systems, while the 1 Mbps capability provides headroom above common low-speed serial-control rates. Place the four 0.1 µF charge-pump capacitors close to the IC and route the RS-232 nets away from switching nodes. Industrial implementations should also account for ground potential differences, cable transients, and connector-level protection, because the transceiver itself is intended for the logic-to-RS-232 signal conversion rather than surge suppression.

📊

Data Acquisition Systems

The MAX3232CWE+ can connect a controller, instrument, or data-acquisition module to a legacy RS-232 host without a separate negative supply. Two receive channels allow status or measurement signals to return while two transmit channels support command traffic, making the 2/2 configuration useful for compact multi-signal links. The 1 Mbps maximum rate supports faster telemetry than conventional low-speed transceivers, while the 3.0 V to 5.5 V supply range simplifies compatibility with embedded processors. Use short, properly referenced routes for the charge-pump capacitors and follow the manufacturer's input and output pin definitions to avoid logic contention on unused channels.

🖥️

Point-of-Sale and Peripheral Equipment

The MAX3232CWE+ provides a compact interface between a low-voltage embedded controller and an RS-232 peripheral such as a scale, printer, reader, or service terminal. Its four-wire, 2/2 organization supports bidirectional command and data exchange, while operation from 3.0 V to 5.5 V allows integration with common embedded supply rails. The 16-pin SOIC package simplifies board-space planning compared with discrete driver and receiver solutions. Keep the charge-pump capacitor loops compact to limit local switching noise, terminate unused inputs as directed by the datasheet, and provide connector protection according to the expected cable and installation environment.

🔧

Instrument Consoles and Test Equipment

The MAX3232CWE+ is useful in laboratory and test equipment that retains an RS-232 management or service interface. Its low-power, single-supply operation can simplify retrofitting legacy serial ports into instruments powered from 3.3 V or 5 V, and its 1 Mbps capability accommodates faster control traffic than older limited-rate transceivers. The dual-driver and dual-receiver arrangement can consolidate several point-to-point signals into one package. During layout, separate receive paths from high-energy analog and clock networks, keep the charge-pump capacitor connections short, and use a stable ground reference to reduce noise and logic-level errors.

🧩

Embedded Serial Communication

The MAX3232CWE+ bridges a modern embedded controller's logic-level UART to a true RS-232 port without a separate negative power rail. This is particularly useful in equipment where the existing service or configuration interface uses RS-232 but the main processor operates from a 3.3 V rail. The MAX3232 supports rates up to 1 Mbps and provides two channels in each direction for multi-purpose links. Place input and output decoupling according to the reference circuit, preserve the intended RS-232 signal polarity, and avoid long stubs from the transceiver to the connector because those can degrade signal integrity at higher data rates.

🔄

Legacy RS-232 Equipment Retrofit

The MAX3232CWE+ can modernize equipment designed around the industry-standard MAX232 while retaining a conventional RS-232 connector and wiring scheme. Analog Devices states that MAX3232 is pin, package, and functionally compatible with MAX232, allowing the upgrade to be evaluated without changing the 16-SOIC footprint. The lower 3.0 V minimum supply and higher 1 Mbps capability distinguish it from a basic 5 V MAX232 implementation. Nevertheless, verify every pin assignment, external capacitor value, and temperature requirement in the current datasheet before production use, and inspect the board for obsolete charge-pump layouts or unprotected connector wiring.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

MAX3232EWE+ Same-family RS-232 transceiver option ব্যবহৃত হয়: Industrial Control Serial Ports, Point-of-Sale and Peripheral Equipment, Embedded Serial Communication MAX3232ECWE+ Maxim Integrated ব্যবহৃত হয়: Industrial Control Serial Ports, Instrument Consoles and Test Equipment, Legacy RS-232 Equipment Retrofit MAX3232ESE Alternative dual-transceiver family member ব্যবহৃত হয়: Data Acquisition Systems, Instrument Consoles and Test Equipment MAX3232ECDW Texas Instruments ব্যবহৃত হয়: Data Acquisition Systems, Embedded Serial Communication MAX3232EWE Same-family single-supply transceiver option ব্যবহৃত হয়: Point-of-Sale and Peripheral Equipment, Legacy RS-232 Equipment Retrofit
What are the key specifications of MAX3232CWE+ that engineers should know?
The MAX3232CWE+ is a dual RS-232 transceiver with two drivers, two receivers, a 3.0 V to 5.5 V supply range, and operation up to 1 Mbps in a 16-pin SOIC package. According to the Analog Devices MAX3232 product page, the family is a production, low-power, true RS-232 transceiver that uses four external 0.1 µF capacitors. Its single-supply charge-pump design is especially useful when the equipment cannot provide a negative RS-232 rail.
Where can I download the MAX3232CWE+ datasheet PDF?
The official MAX3232 datasheet is available from the Analog Devices product page at https://www.analog.com/en/products/max3232.html. The manufacturer identifies the MAX3232 as a 3.0 V to 5.5 V, low-power, true RS-232 transceiver supporting data rates up to 1 Mbps. Use the Data Sheet link on that page for the complete electrical characteristics, package drawing, pin description, and application circuit.
Where can I find the MAX3232CWE+ pinout?
The MAX3232CWE+ uses a 16-pin SOIC package, and its complete pin-assignment diagram is contained in the pin-description section of the Analog Devices MAX3232 datasheet. The package includes the two RS-232 driver inputs, two receiver outputs, charge-pump connections, supply pins, enable control, and ground pins. Assign PCB nets from the manufacturer pin-description table rather than relying on generic RS-232 transceiver layouts.
Can MAX3232CWE+ operate from a 3.3 V supply?
Yes. The MAX3232CWE+ operates from a 3.0 V to 5.5 V supply, so a regulated 3.3 V rail is within its operating range. According to the Analog Devices MAX3232 product information, the transceiver uses a low-dropout transmitter output stage and charge pumps to produce compliant RS-232 levels from a single positive supply. Confirm external-capacitor values and operating current against the datasheet for the selected load and data rate.
What is the difference between MAX3232CWE+ and MAX232CWE+?
The MAX3232CWE+ is the MAX3232 family's 3.0 V to 5.5 V, up-to-1-Mbps true RS-232 transceiver, while the MAX232CWE+ is described by Maxim as a 5 V-powered multichannel RS-232 driver and receiver. Analog Devices states that MAX3232 is pin, package, and functionally compatible with MAX232. The practical distinction is the MAX3232's lower-voltage and higher-speed capability.
What is the best drop-in replacement for MAX3232CWE+?
The closest same-family choice is the MAX3232EWE+ because it retains the 16-pin SOIC footprint and provides the same dual-driver, dual-receiver RS-232 interface architecture. The MAX3232EWE+ belongs to the MAX3232 family but its specific electrical ratings should be checked against the manufacturer datasheet before substitution. A cross-brand option is SP3232EBCN-L, which is identified as pin compatible but supports 250 kbit/s rather than 1 Mbps.
Can SP3232EBCN-L replace MAX3232CWE+?
SP3232EBCN-L is a functional, pin-compatible alternative to the MAX3232CWE+, but its maximum data rate is 250 kbit/s versus 1 Mbps for the MAX3232. That is a 75% reduction in rated data rate. Use it when the serial link operates at or below 250 kbit/s and the remaining electrical characteristics satisfy the design; otherwise, retain a 1-Mbps-capable MAX3232-family device.
MAX3232CWE+ vs SP3232EBCN-L — which is better for a high-speed serial link?
The MAX3232CWE+ is better for a high-speed link because it supports operation up to 1 Mbps, while SP3232EBCN-L is rated for 250 kbit/s. The MAX3232 therefore provides four times the stated maximum data rate. According to the MaxLinear cross-reference information, SP3232EBCN-L is pin compatible with MAX3232CWE+, but the lower rate can prevent direct substitution in designs that previously operated above 250 kbit/s.
When should I choose MAX3232CWE+ over MAX3232EWE+?
Choose the MAX3232CWE+ when the design specifically calls for the MAX3232CWE+ ordering code or when its documented temperature grade, lifecycle, or sourcing position is preferable. The MAX3232EWE+ is a same-family option that preserves the 16-pin SOIC interface architecture. Review the electrical tables for both orderable variants before treating either device as a drop-in replacement.
Is MAX3232CWE+ suitable for industrial control and data-acquisition systems?
Yes, the MAX3232CWE+ fits industrial control and data-acquisition links that use a point-to-point RS-232 connection. Its 3.0 V to 5.5 V operating range, dual transceiver arrangement, and up-to-1-Mbps capability support compact serial interfaces. The design must still account for grounding, cable length, protection, and industrial noise using appropriate board-layout and surge-protection practices.
How much decoupling does the MAX3232CWE+ require?
The MAX3232 implementation uses four external 0.1 µF charge-pump capacitors. Place each capacitor close to the IC pin specified in the Analog Devices application circuit to minimize charge-pump loop area and switching disturbance. Keep the route between each capacitor and its associated IC pin short, and maintain a continuous ground reference beneath and around the transceiver.
Where can I buy MAX3232CWE+ online and what is its price?
The MAX3232CWE+ can be requested through the Request a Quote form on this XAIPART product page. The form is the appropriate route for current price, stock, packaging, and lead-time confirmation. Submit the exact MPN MAX3232CWE+ and specify the required quantity and shipment destination so the current commercial terms can be returned.
What is the lead time for MAX3232CWE+?
Lead time should be confirmed through the Request a Quote form on this page for the exact MAX3232CWE+ ordering code and requested quantity. The Analog Devices product page identifies MAX3232 as a production family, but current factory and distribution availability can vary by package, quantity, and shipment region. The quote request provides the appropriate route for a current delivery commitment.
Is MAX3232CWE+ currently in stock?
Current stock for MAX3232CWE+ should be confirmed through the Request a Quote form on this XAIPART page. Include the exact MPN, desired quantity, and packaging requirement so availability can be matched to the production schedule. Because inventory changes over time, a stock statement should be tied to a current quotation rather than a static listing.
What can replace MAX3232CWE+ in a legacy design?
MAX3232 family devices with the same 16-pin SOIC interface are the primary replacement path, including MAX3232EWE+ and MAX3232ECWE+. SP3232EBCN-L can also serve as a pin-compatible alternative when 250 kbit/s is sufficient. The replacement must match the footprint and meet the original design's supply-voltage, data-rate, temperature, and channel requirements; the MAX3232EWE+ comparison identifies the data-rate difference for SP3232EBCN-L.
Does the MAX3232CWE+ require a negative power supply?
No external negative power supply is required. The MAX3232CWE+ operates from a single 3.0 V to 5.5 V supply and uses internal charge pumps to create the voltage levels needed by the RS-232 drivers. According to the Analog Devices MAX3232 product information, the design requires four external 0.1 µF capacitors. This simplifies equipment where only positive supply rails are available.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MAX3232CWE+ — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose MAX3232CWE+ for a new 3.3 V or 5 V RS-232 design that benefits from a 2-driver, 2-receiver arrangement and operation up to 1 Mbps. It is also appropriate for MAX232 legacy upgrades when the existing board uses the compatible 16-pin SOIC arrangement, although every pin and capacitor connection should still be checked. MAX3232EWE+ and MAX3232ECWE+ are same-brand family options that can support second-source or lifecycle planning, subject to comparison of their individual electrical ratings. MAX3232ESE and MAX3232ECDW provide additional same-family ordering paths in the same interface architecture. Select SP3232EBCN-L only when 250 kbit/s is sufficient and the complete electrical characteristics meet the application. For any substitution, verify footprint, pinout, supply range, data rate, temperature grade, and capacitor values before releasing production artwork.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য MAX3232EWE+ MAX3232ECWE+ MAX3232ESE MAX3232ECDW MAX3232EWE SP3232EBCN-L
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices MaxLinear
Package 16-SOIC 16-SOIC - same 16-SOIC - same 16-SOIC - same 16-SOIC - same 16-SOIC - same 16-SOIC - same

মূল পার্থক্যসমূহ

  • Higher supported link rate than the pin-compatible cross-brand option (বনামSP3232EBCN-L)
  • Single-supply operation across a 3.0 V to 5.5 V range (বনামMAX3232ESE)
  • Four integrated signal channels in one interface package (বনামMAX3232ECDW)

ডিজাইন নোট

Place the four 0.1 µF charge-pump capacitors directly across their designated IC pins, using the shortest and lowest-loop-area traces possible. The MAX3232 generates bipolar RS-232 voltage through switched charge pumps, so long capacitor connections can increase radiated or conducted disturbance. Keep the ground plane continuous beneath the device and return each capacitor's ground terminal to the nearest appropriate ground reference rather than through a narrow shared path.

Route the RS-232 driver outputs and receiver inputs as matched transmission-line paths where practical, and keep them away from clocks, switching regulators, ADC inputs, and sensitive analog traces. Maintain a continuous signal-ground reference between the transceiver and connector when the board architecture allows. At the connector, define protection components according to the cable environment and grounding scheme; the transceiver handles RS-232 signal levels but is not a substitute for external surge protection.

Do not assume that any 16-pin SOIC transceiver is interchangeable. Verify the exact pin names, enable polarity, charge-pump capacitor arrangement, receiver output behavior, supply range, and maximum data rate in the manufacturer datasheet. In particular, SP3232EBCN-L is pin compatible but rated for 250 kbit/s versus 1 Mbps for MAX3232CWE+, so substituting it into a higher-rate design can cause communication errors even when the PCB footprint fits.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The MAX3232 is a communications interface IC rather than an automotive-qualified device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the current manufacturer product documentation.

ডেটা যাচাই করা হয়েছে: 2026-11-09 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

MAX3232CWE+ datasheet MAX3232CWE+ datasheet pdf MAX3232CWE+ pinout MAX3232CWE+ equivalent MAX3232CWE+ replacement MAX3232CWE+ vs SP3232EBCN-L Analog Devices MAX3232CWE+ MAX3232CWE+ 1 Mbps RS-232 MAX3232CWE+ 16-SOIC footprint MAX3232CWE+ RS-232 application circuit MAX3232CWE+ price MAX3232CWE+ stock

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Analog Devices MAX3232CWE+ MAX3232 MAX3232EWE+ MAX3232ECWE+ MAX3232ESE MAX3232ECDW MAX3232EWE SP3232EBCN-L MaxLinear RS-232 transceiver RS-232 driver RS-232 receiver interface IC level translator serial communications charge pump single-supply operation 16-SOIC SOIC family surface mount SMD package 1 Mbps data rate 3.0 V to 5.5 V supply dual charge pump
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন