Texas Instruments

MAX3243CDBRE4 - 250kbps RS-232 Transceiver | Texas Instruments

MPN: MAX3243CDBRE4 ✓ সক্রিয়
3 V to 5.5 V Vdss 1.2 mA Id 28-pin SSOP, 208 mil Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

MAX3243CDBRE4 সারাংশ

The Texas Instruments MAX3243CDBRE4 is a 3 V to 5.5 V multichannel RS-232 line driver and receiver with 250 kbps data-rate capability and ±15 kV ESD protection, housed in a 28-pin SSOP package. It combines three RS-232 drivers, five RS-232 receivers, and an integrated dual charge-pump circuit in one interface IC.

An RS-232 transceiver is the electrical bridge between a low-voltage digital controller and a differential, bipolar-voltage communications port. It converts controller-side logic levels into RS-232-compatible driver outputs while converting incoming RS-232 signals into logic-compatible receiver outputs. The MAX3243 belongs to the RS-232 transceiver class within interface ICs, providing signal conditioning, voltage translation, and port protection in a single device.

The device operates from 3 V to 5.5 V, supports data rates up to 250 kbps, and provides ±15 kV human-body-model ESD protection. The MAX3243CDBRE4 commercial-temperature ordering option is specified from 0 °C to 70 °C. Its low-power mode and wake-up function support systems where the interface must reduce consumption while still detecting an incoming activity signal.

The three-driver and five-receiver arrangement is useful for asymmetric serial links. A system with three outbound command or control signals can share one part with two additional inbound receiver channels. The integrated charge-pump circuit generates the RS-232 bipolar voltage required by the drivers, reducing the need for external charge-pump components while retaining a compact 28-pin SSOP footprint.

Typical uses include industrial control systems, test and measurement equipment, data-acquisition systems, instrumentation links, and embedded serial interfaces. The MAX3243 is especially appropriate where several RS-232 channels must share a limited board area and where ESD protection is needed at externally accessible connectors.

When laying out the circuit, route the charge-pump capacitor connections and driver outputs according to the manufacturer's application diagram. Keep external protection and connector circuitry away from sensitive logic paths, and verify that the selected cable, grounding method, and logic levels match the intended RS-232 application.

This product page organizes the principal electrical limits, package information, application fit, and verified drop-in alternatives. It also highlights practical interface-design considerations that help engineers evaluate the MAX3243CDBRE4 beyond a basic distributor specification summary.

এর জন্য ড্রপ-ইন বিকল্প MAX3243CDBRE4 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible MAX3243CDBRE4 (একই form factor এবং footprint) — পার্থক্য রয়েছে Driver Count, ESD Protection, Maximum Data Rate, Package, Receiver Count.

Analog Devices
Driver Count: 3 drivers
ESD Protection: ±15kV
Maximum Data Rate: 250kbps
এর সাথে তুলনা করুন MAX3243CDBRE4 →

MAX3243EEUI+T

✅ ড্রপ-ইন
Analog Devices
📦 28-pin SSOP, 208 mil
RS-232 transceiver · 3.0V to 5.5V · 250kbps · 3 drivers · 5 receivers · Full duplex · ±15kV · 1µA

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MAX3227EEAE

✅ ড্রপ-ইন
📦 28-pin SSOP, 208 mil
Shares the 28-pin SSOP format and 3 V to 5.5 V RS-232 interface class, but channel count, temperature grade, and auxiliary control functions require comparison with the target specification.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

SN65C3243DBR

✅ ড্রপ-ইন
📦 28-pin SSOP, 208 mil
Matches the 3-driver, 5-receiver architecture, 250 kbps class, and ±15 kV HBM protection, with differences in shutdown and enable implementation requiring pin-level review.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

SP3243EEA-L

✅ ড্রপ-ইন
📦 28-pin SSOP, 208 mil
Matches the 3-driver, 5-receiver RS-232 arrangement and 3 V to 5.5 V supply class, while auxiliary monitoring, shutdown behavior, and temperature limits require verification.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MAX3243CDBRE4 বিশেষণ

Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbps
ESD Protection ±15 kV HBM
Driver Count 3
Receiver Count 5
Charge-Pump Circuit Dual
অপারেটিং তাপমাত্রা 0 °C to 70 °C
সাপ্লাই কারেন্ট 1.2 mA
Low-Power Mode Yes
Wake-Up Function Yes
Interface Standard RS-232
প্যাকেজ 28-pin SSOP, 208 mil
মাউন্টিং টাইপ Surface mount
RoHS স্ট্যাটাস Compliant
Transceiver Configuration 3/5 full-duplex RS-232 transceiver

MAX3243CDBRE4 28-pin ssop, 208 mil পিন কনফিগারেশন গাইড

MAX3243CDBRE4 (28-pin ssop, 208 mil প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

MAX3243CDBRE4-এর জন্য 28-pin ssop, 208 mil প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MAX3243CDBRE4.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

MAX3243CDBRE4 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Controller Serial Interface, Test and Measurement Equipment, Data-Acquisition System, Embedded Serial Communication Hub, Security and Access-Control Equipment, Portable Diagnostic Equipment.

🏭

Industrial Controller Serial Interface

The MAX3243CDBRE4 fits industrial controller links that need several RS-232 signals but limited board area. Three drivers can carry commands, enables, or configuration outputs, while five receivers can monitor status, acknowledgments, and sensor data. Its 3 V to 5.5 V supply range supports both 3.3 V and 5 V controller logic, and the 250 kbps rate provides ample margin for typical supervisory and configuration protocols. The integrated dual charge-pump circuit simplifies the transmitter section, while ±15 kV HBM ESD protection strengthens the external line interface. Keep the charge-pump capacitors and protection network close to the device, and connect the logic ground reference according to the manufacturer's application circuit.

🔧

Test and Measurement Equipment

MAX3243CDBRE4 is useful in test and measurement instruments that expose RS-232 service or control ports. Its 3 drivers and 5 receivers allow a single interface IC to handle multiple command outputs and incoming measurement-status signals, reducing the number of separate transceiver packages. The device's 250 kbps maximum rate supports legacy instrument-control and data-transfer protocols, while its low-power mode and wake-up function can reduce consumption between test sequences. A 28-pin SSOP package preserves routing flexibility in compact instruments. Designers should follow the manufacturer's charge-pump capacitor placement guidance and validate the external connector's ESD and grounding arrangement according to the target enclosure and cable environment.

📟

Data-Acquisition System

The MAX3243CDBRE4 can connect a data-acquisition controller to an external RS-232 instrument or legacy peripheral. Five receivers allow simultaneous collection of status, ready, alarm, and data signals, while three drivers support outbound commands and handshake signals. The 250 kbps capability is substantially above the throughput of many older acquisition protocols, and the 3 V to 5.5 V operating range supports mixed-voltage controller designs. The integrated charge pump avoids a separate discrete voltage-conversion circuit. For reliable operation, route each external line through the intended driver or receiver, maintain recommended capacitor spacing, and confirm that the host computer, cable, and equipment grounding method are compatible with the RS-232 interface.

🖥️

Embedded Serial Communication Hub

MAX3243CDBRE4 supports embedded systems that require a multi-channel RS-232 bridge between a microcontroller and legacy equipment. The three-driver configuration can transmit commands or enables, and the five receivers can accept acknowledgments and status lines without requiring five separate receiver packages. Its 28-pin SSOP package supports compact board layouts, and the 250 kbps rate comfortably covers configuration links, diagnostics, and low-rate control traffic. The low-power mode and wake-up capability are useful in systems that must detect activity without maintaining continuous full-power operation. Confirm that the firmware's logic levels match the 3 V to 5.5 V supply choice and use the manufacturer's shutdown and enable truth tables when designing the power-management sequence.

🛡️

Security and Access-Control Equipment

The MAX3243CDBRE4 can serve as the RS-232 communications interface in access-control readers, alarm panels, and security equipment with external serial connectors. Multiple transmitters and receivers support door-state commands, acknowledgments, and diagnostic signals while conserving PCB area. The ±15 kV HBM protection provides additional robustness at externally accessible RS-232 lines, and the 250 kbps rate supports common configuration and event-reporting formats. A 3.3 V system can operate the transceiver within its 3 V to 5.5 V input range. Security equipment designers should still evaluate enclosure grounding, cable transients, and production ESD tests, because the integrated protection rating does not replace correct board layout or a complete external surge-protection strategy.

📱

Portable Diagnostic Equipment

MAX3243CDBRE4 fits portable diagnostic and service equipment that communicates with RS-232 instruments through a multi-signal connector. The low-power mode can lower consumption during idle periods, while the wake-up function supports recovery when an external device becomes active. Its three transmitters and five receivers can consolidate data, status, and control wiring, and the 28-pin SSOP package helps maintain a compact layout. The 250 kbps data-rate ceiling provides margin for instrument data and diagnostic commands without imposing a high-speed protocol requirement. Engineers should verify the shutdown-state behavior against host firmware and place the charge-pump capacitors according to the Texas Instruments layout example to avoid excessive supply ripple or unstable driver outputs.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

MAX3243EEUI+T Analog Devices ব্যবহৃত হয়: Industrial Controller Serial Interface, Security and Access-Control Equipment SN65C3243DBR Comparable 3-driver, 5-receiver RS-232 interface ব্যবহৃত হয়: Test and Measurement Equipment, Portable Diagnostic Equipment SP3243EEA-L Comparable multichannel RS-232 interface ব্যবহৃত হয়: Data-Acquisition System MAX3227EEAE Same-package Texas Instruments RS-232 interface option ব্যবহৃত হয়: Embedded Serial Communication Hub
What is the MAX3243CDBRE4?
The MAX3243CDBRE4 is a 3 V to 5.5 V, three-driver and five-receiver RS-232 transceiver from Texas Instruments. According to the MAX3243 manufacturer product page, it supports communication at up to 250 kbps and includes ±15 kV HBM ESD protection. The device is packaged in a 28-pin SSOP and integrates a dual charge-pump circuit for generating the bipolar voltage required by RS-232 drivers.
What is the operating voltage of MAX3243CDBRE4?
The MAX3243CDBRE4 operates from 3 V to 5.5 V. This range allows the interface to work with 3.3 V and 5 V digital systems while the integrated charge-pump circuitry produces the higher bipolar voltage required at the RS-232 line outputs. Texas Instruments identifies the part as a 3 V to 5.5 V multichannel RS-232 line driver and receiver on its official MAX3243 product page.
What is the maximum data rate of MAX3243CDBRE4?
The MAX3243CDBRE4 supports a maximum RS-232 data rate of 250 kbps. This makes it suitable for control, instrumentation, and data-acquisition links operating well below the device limit, while allowing useful margin for cable capacitance, loading, and system timing. The 250 kbps rating is stated on the Texas Instruments MAX3243 product page.
How many RS-232 drivers and receivers does MAX3243CDBRE4 contain?
The MAX3243CDBRE4 contains three RS-232 line drivers and five RS-232 line receivers. The asymmetric 3/5 arrangement supports systems with several outgoing command or control lines and more incoming data or status lines. Texas Instruments describes the device as a multichannel line driver and receiver and identifies the integrated dual charge-pump circuit on the official product page.
Does MAX3243CDBRE4 have ESD protection?
Yes, the MAX3243CDBRE4 includes ±15 kV human-body-model ESD protection. According to the Texas Instruments MAX3243 product page, this protection is intended for the device's RS-232 line-driver and line-receiver interface. Designers should still place the IC appropriately in the board layout and use suitable external protection when cables leave the enclosure or connect to unknown equipment.
Where can I download the MAX3243CDBRE4 datasheet PDF?
The official MAX3243 datasheet is available from Texas Instruments at https://www.ti.com/lit/gpn/max3243. It is the preferred document for supply limits, electrical characteristics, pin assignments, charge-pump capacitor recommendations, and the typical operating circuit. The manufacturer product page at https://www.ti.com/product/MAX3243 provides ordering, quality, and support information alongside the technical documentation.
Where can I find the MAX3243CDBRE4 pinout?
The MAX3243CDBRE4 pin assignment is shown in the pin-configuration section of the official Texas Instruments MAX3243 datasheet. The device uses a 28-pin SSOP package and includes supply, ground, charge-pump capacitor, driver-output, receiver-input, enable, and shutdown-related connections according to the manufacturer pin table. Use that table when assigning PCB nets and checking exposed versus connected pins.
Where can I buy MAX3243CDBRE4 online?
Use the Request a Quote form on this page to request MAX3243CDBRE4 availability, order quantities, and current lead time. The device is a 3.3 V-compatible RS-232 interface IC in a 28-pin SSOP package, so quote requests should include the required quantity, reel or cut-tape preference, and destination. A current quotation confirms commercial terms without relying on potentially stale catalog pricing.
What is the price of MAX3243CDBRE4?
Use the Request a Quote form on this page for the current MAX3243CDBRE4 quotation. The form allows quantity, delivery, and packaging requirements to be included so the response reflects the actual order rather than a generic component price. This approach is especially useful for the 28-pin SSOP ordering option because market availability and volume breaks can change independently of the technical specification.
What is the lead time for MAX3243CDBRE4?
Submit a MAX3243CDBRE4 request through the Request a Quote form on this page to confirm the current lead time. Include the required quantity and preferred delivery method so manufacturing scheduling can be evaluated against the project schedule. The component's 3 V to 5.5 V operating range, 250 kbps data rate, and 28-pin SSOP format should be confirmed before accepting any delivery schedule.
Is MAX3243CDBRE4 in stock?
Use the Request a Quote form on this page to request current MAX3243CDBRE4 inventory confirmation and an order commitment. Stock status can change by package suffix, quantity, and delivery location, so an inventory response is more useful than a generic stock statement. Include the required production quantity and target delivery date when requesting the quotation.
What is the best drop-in replacement for MAX3243CDBRE4?
The MAX3243EEUI+T is the closest documented same-family drop-in candidate because it retains the MAX3243 function and 28-pin SSOP format. Texas Instruments distinguishes the E-grade option by operating-temperature range and order suffix, so engineers must compare temperature limits, enable or shutdown behavior, and exact pin assignments before substitution. Verify every affected net against the manufacturer datasheet before releasing a PCB revision.
Can SN65C3243DBR replace MAX3243CDBRE4?
SN65C3243DBR is a closely related 3-driver, 5-receiver RS-232 device, but it should not be treated as an automatic drop-in replacement. The verified comparison identifies the same core transceiver arrangement and ±15 kV HBM protection, while differences in shutdown, enable, and auxiliary-pin behavior may affect board compatibility. Confirm the complete pin description and control logic in each manufacturer datasheet before using it on an existing design.
When should I choose MAX3243CDBRE4 over MAX3243EEUI+T?
Choose MAX3243CDBRE4 when the commercial 0 °C to 70 °C grade is sufficient and the required ordering option matches the PCB and procurement plan. Choose the MAX3243EEUI+T when its specified temperature range is needed for a wider operating environment. Both belong to the MAX3243 family and use a 28-pin SSOP format, but the exact suffix, temperature grade, and control behavior must be checked before substitution.
What is the best SP3243EEA-L equivalent for MAX3243CDBRE4?
The SP3243EEA-L is a functionally close 3-driver and 5-receiver RS-232 alternative for MAX3243CDBRE4, but it requires an engineering compatibility review rather than blind substitution. The verified comparison confirms the same principal transceiver configuration, while shutdown, monitoring, and auxiliary control behavior can differ. Compare the complete pin table, supply limits, ESD rating, and operating temperature before approving it as a drop-in replacement.
Is MAX3243CDBRE4 suitable for industrial control and instrumentation?
The MAX3243CDBRE4 is well suited to industrial control and instrumentation interfaces operating within 0 °C to 70 °C. Its three drivers and five receivers support several command and status lines, while the 250 kbps rate exceeds the requirements of many legacy serial-control protocols. The ±15 kV HBM protection and integrated charge pump also simplify interface implementation in compact embedded systems.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MAX3243CDBRE4 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose MAX3243CDBRE4 for a compact RS-232 interface that requires three drivers, five receivers, a 3 V to 5.5 V supply, operation up to 250 kbps, and a commercial 0 °C to 70 °C ambient range. Select MAX3243EEUI+T when the same MAX3243 family and 28-pin SSOP format are needed but a wider temperature grade is required. Consider MAX3227EEAE when its reduced or different channel arrangement better matches the board, but verify every pin and control function before redesigning around it. SN65C3243DBR offers a closely related 3-driver, 5-receiver architecture with ±15 kV HBM protection and may suit a controlled redesign, while its enable and shutdown behavior must be checked. SP3243EEA-L is a cross-brand alternative with comparable primary channel counts, but its monitoring and shutdown functions require a detailed pin-level review. For every substitute, confirm package dimensions, supply limits, temperature grade, charge-pump capacitors, logic thresholds, and external-line protection before approving a drop-in change.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য MAX3243EEUI+T MAX3227EEAE SN65C3243DBR SP3243EEA-L
Package 28-pin SSOP, 208 mil 28-pin SSOP, 208 mil 28-pin SSOP, 208 mil 28-pin SSOP, 208 mil 28-pin SSOP, 208 mil
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Exar
Supply Voltage Range 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V

মূল পার্থক্যসমূহ

  • Wide commercial-temperature ordering option (বনামMAX3243EEUI+T)
  • Three-driver and five-receiver integration (বনামMAX3227EEAE)
  • Integrated ESD protection and low-power control (বনামSP3243EEA-L)

ডিজাইন নোট

Place the charge-pump capacitors and the MAX3243CDBRE4 close together using the Texas Instruments typical-application layout. Keep the driver outputs and receiver inputs away from sensitive digital clocks and analog reference nodes. Route the externally accessible RS-232 lines directly toward the connector or protection network, and minimize unnecessary stubs because lead inductance can degrade edge behavior and increase transient stress.

Design each external RS-232 channel for the intended data rate, cable length, and loading. The device supports up to 250 kbps, but lower protocol rates usually provide better margin with long cables, connector transitions, and imperfect grounds. Use controlled-fall-time driver outputs where required by the interface implementation, and confirm that the host, cable shield, and signal-ground arrangement meet the RS-232 application requirements.

Do not assume that identical SSOP pin counts guarantee drop-in compatibility. Before substituting an alternative, compare the complete pin-description table, enable and shutdown truth tables, charge-pump connections, receiver-enable behavior, operating-temperature grade, and supply limits. The MAX3243EEUI+T is the closest same-family option, while alternate manufacturers may implement auxiliary control functions differently even when the driver and receiver counts match.

কমপ্লায়েন্স তথ্য

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

RoHS compliance is identified on the MAX3243CDBRE4 component listing. No separate REACH, halogen-free, conflict-minerals, or automotive qualification statement was identified.

ডেটা যাচাই করা হয়েছে: 2026-11-09 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

MAX3243CDBRE4 datasheet MAX3243CDBRE4 pinout MAX3243CDBRE4 datasheet pdf MAX3243CDBRE4 equivalent MAX3243CDBRE4 replacement MAX3243CDBRE4 cross reference MAX3243CDBRE4 SSOP-28 pinout MAX3243CDBRE4 application circuit MAX3243CDBRE4 vs SN65C3243DBR MAX3243CDBRE4 price Texas Instruments MAX3243CDBRE4 MAX3243CDBRE4 250kbps

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments MAX3243CDBRE4 MAX3243EEUI+T MAX3227EEAE SN65C3243DBR SP3243EEA-L RS-232 transceiver RS-232 line driver RS-232 line receiver interface IC semiconductor low-dropout regulator charge-pump circuit dual charge pump 250 kbps ±15 kV HBM ESD protection 3 V to 5.5 V 28-pin SSOP SSOP package family surface mount SMD RoHS industrial control test and measurement data acquisition
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন