MAX3243CDBRE4 - 250kbps RS-232 Transceiver | Texas Instruments
MPN: MAX3243CDBRE4 ✓ 啟用中MAX3243CDBRE4 概覽
An RS-232 transceiver is the electrical bridge between a low-voltage digital controller and a differential, bipolar-voltage communications port. It converts controller-side logic levels into RS-232-compatible driver outputs while converting incoming RS-232 signals into logic-compatible receiver outputs. The MAX3243 belongs to the RS-232 transceiver class within interface ICs, providing signal conditioning, voltage translation, and port protection in a single device.
The device operates from 3 V to 5.5 V, supports data rates up to 250 kbps, and provides ±15 kV human-body-model ESD protection. The MAX3243CDBRE4 commercial-temperature ordering option is specified from 0 °C to 70 °C. Its low-power mode and wake-up function support systems where the interface must reduce consumption while still detecting an incoming activity signal.
The three-driver and five-receiver arrangement is useful for asymmetric serial links. A system with three outbound command or control signals can share one part with two additional inbound receiver channels. The integrated charge-pump circuit generates the RS-232 bipolar voltage required by the drivers, reducing the need for external charge-pump components while retaining a compact 28-pin SSOP footprint.
Typical uses include industrial control systems, test and measurement equipment, data-acquisition systems, instrumentation links, and embedded serial interfaces. The MAX3243 is especially appropriate where several RS-232 channels must share a limited board area and where ESD protection is needed at externally accessible connectors.
When laying out the circuit, route the charge-pump capacitor connections and driver outputs according to the manufacturer's application diagram. Keep external protection and connector circuitry away from sensitive logic paths, and verify that the selected cable, grounding method, and logic levels match the intended RS-232 application.
This product page organizes the principal electrical limits, package information, application fit, and verified drop-in alternatives. It also highlights practical interface-design considerations that help engineers evaluate the MAX3243CDBRE4 beyond a basic distributor specification summary.
直接替換替代品,適用於 MAX3243CDBRE4 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MAX3243CDBRE4 (相同外形與佔位) — 差異在於 Driver Count, ESD Protection, Maximum Data Rate, Package, Receiver Count.
MAX3243EEUI+T
✅ 直接替換聯絡詢價
查看資料表 →MAX3227EEAE
✅ 直接替換📋 參考替代品(不在目錄中)
SN65C3243DBR
✅ 直接替換📋 參考替代品(不在目錄中)
SP3243EEA-L
✅ 直接替換📋 參考替代品(不在目錄中)
MAX3243CDBRE4 規格
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| ESD Protection | ±15 kV HBM |
| Driver Count | 3 |
| Receiver Count | 5 |
| Charge-Pump Circuit | Dual |
| 工作溫度 | 0 °C to 70 °C |
| 供應電流 | 1.2 mA |
| Low-Power Mode | Yes |
| Wake-Up Function | Yes |
| Interface Standard | RS-232 |
| 封裝 | 28-pin SSOP, 208 mil |
| 安裝類型 | Surface mount |
| RoHS 狀態 | Compliant |
| Transceiver Configuration | 3/5 full-duplex RS-232 transceiver |
MAX3243CDBRE4 28-pin ssop, 208 mil 腳位配置指南
MAX3243CDBRE4(28-pin ssop, 208 mil 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: MAX3243CDBRE4.
請參閱 資料表 以查看完整腳位配置。
典型應用
MAX3243CDBRE4 適用於 6 應用s: Industrial Controller Serial Interface, Test and Measurement Equipment, Data-Acquisition System, Embedded Serial Communication Hub, Security and Access-Control Equipment, Portable Diagnostic Equipment.
Industrial Controller Serial Interface
The MAX3243CDBRE4 fits industrial controller links that need several RS-232 signals but limited board area. Three drivers can carry commands, enables, or configuration outputs, while five receivers can monitor status, acknowledgments, and sensor data. Its 3 V to 5.5 V supply range supports both 3.3 V and 5 V controller logic, and the 250 kbps rate provides ample margin for typical supervisory and configuration protocols. The integrated dual charge-pump circuit simplifies the transmitter section, while ±15 kV HBM ESD protection strengthens the external line interface. Keep the charge-pump capacitors and protection network close to the device, and connect the logic ground reference according to the manufacturer's application circuit.
推薦
Test and Measurement Equipment
MAX3243CDBRE4 is useful in test and measurement instruments that expose RS-232 service or control ports. Its 3 drivers and 5 receivers allow a single interface IC to handle multiple command outputs and incoming measurement-status signals, reducing the number of separate transceiver packages. The device's 250 kbps maximum rate supports legacy instrument-control and data-transfer protocols, while its low-power mode and wake-up function can reduce consumption between test sequences. A 28-pin SSOP package preserves routing flexibility in compact instruments. Designers should follow the manufacturer's charge-pump capacitor placement guidance and validate the external connector's ESD and grounding arrangement according to the target enclosure and cable environment.
推薦
Data-Acquisition System
The MAX3243CDBRE4 can connect a data-acquisition controller to an external RS-232 instrument or legacy peripheral. Five receivers allow simultaneous collection of status, ready, alarm, and data signals, while three drivers support outbound commands and handshake signals. The 250 kbps capability is substantially above the throughput of many older acquisition protocols, and the 3 V to 5.5 V operating range supports mixed-voltage controller designs. The integrated charge pump avoids a separate discrete voltage-conversion circuit. For reliable operation, route each external line through the intended driver or receiver, maintain recommended capacitor spacing, and confirm that the host computer, cable, and equipment grounding method are compatible with the RS-232 interface.
推薦
Embedded Serial Communication Hub
MAX3243CDBRE4 supports embedded systems that require a multi-channel RS-232 bridge between a microcontroller and legacy equipment. The three-driver configuration can transmit commands or enables, and the five receivers can accept acknowledgments and status lines without requiring five separate receiver packages. Its 28-pin SSOP package supports compact board layouts, and the 250 kbps rate comfortably covers configuration links, diagnostics, and low-rate control traffic. The low-power mode and wake-up capability are useful in systems that must detect activity without maintaining continuous full-power operation. Confirm that the firmware's logic levels match the 3 V to 5.5 V supply choice and use the manufacturer's shutdown and enable truth tables when designing the power-management sequence.
推薦
Security and Access-Control Equipment
The MAX3243CDBRE4 can serve as the RS-232 communications interface in access-control readers, alarm panels, and security equipment with external serial connectors. Multiple transmitters and receivers support door-state commands, acknowledgments, and diagnostic signals while conserving PCB area. The ±15 kV HBM protection provides additional robustness at externally accessible RS-232 lines, and the 250 kbps rate supports common configuration and event-reporting formats. A 3.3 V system can operate the transceiver within its 3 V to 5.5 V input range. Security equipment designers should still evaluate enclosure grounding, cable transients, and production ESD tests, because the integrated protection rating does not replace correct board layout or a complete external surge-protection strategy.
推薦
Portable Diagnostic Equipment
MAX3243CDBRE4 fits portable diagnostic and service equipment that communicates with RS-232 instruments through a multi-signal connector. The low-power mode can lower consumption during idle periods, while the wake-up function supports recovery when an external device becomes active. Its three transmitters and five receivers can consolidate data, status, and control wiring, and the 28-pin SSOP package helps maintain a compact layout. The 250 kbps data-rate ceiling provides margin for instrument data and diagnostic commands without imposing a high-speed protocol requirement. Engineers should verify the shutdown-state behavior against host firmware and place the charge-pump capacitors according to the Texas Instruments layout example to avoid excessive supply ripple or unstable driver outputs.
推薦
推薦產品摘要
工程參考資料,適用於 MAX3243CDBRE4 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MAX3243EEUI+T | MAX3227EEAE | SN65C3243DBR | SP3243EEA-L |
|---|---|---|---|---|---|
| Package | 28-pin SSOP, 208 mil | 28-pin SSOP, 208 mil | 28-pin SSOP, 208 mil | 28-pin SSOP, 208 mil | 28-pin SSOP, 208 mil |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Exar |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V |
主要差異化特點
- Wide commercial-temperature ordering option (對比MAX3243EEUI+T)
- Three-driver and five-receiver integration (對比MAX3227EEAE)
- Integrated ESD protection and low-power control (對比SP3243EEA-L)
設計說明
Place the charge-pump capacitors and the MAX3243CDBRE4 close together using the Texas Instruments typical-application layout. Keep the driver outputs and receiver inputs away from sensitive digital clocks and analog reference nodes. Route the externally accessible RS-232 lines directly toward the connector or protection network, and minimize unnecessary stubs because lead inductance can degrade edge behavior and increase transient stress.
Design each external RS-232 channel for the intended data rate, cable length, and loading. The device supports up to 250 kbps, but lower protocol rates usually provide better margin with long cables, connector transitions, and imperfect grounds. Use controlled-fall-time driver outputs where required by the interface implementation, and confirm that the host, cable shield, and signal-ground arrangement meet the RS-232 application requirements.
Do not assume that identical SSOP pin counts guarantee drop-in compatibility. Before substituting an alternative, compare the complete pin-description table, enable and shutdown truth tables, charge-pump connections, receiver-enable behavior, operating-temperature grade, and supply limits. The MAX3243EEUI+T is the closest same-family option, while alternate manufacturers may implement auxiliary control functions differently even when the driver and receiver counts match.
合規資訊
RoHS compliance is identified on the MAX3243CDBRE4 component listing. No separate REACH, halogen-free, conflict-minerals, or automotive qualification statement was identified.