MAX3243IPWRDL - 250kbps RS-232 IC | Texas Instruments
MPN: MAX3243IPWRDL ✓ সক্রিয়MAX3243IPWRDL সারাংশ
An RS-232 transceiver is an interface IC that combines line drivers, receivers, and charge-pump voltage conversion to translate between CMOS/TTL logic levels and the bipolar voltage levels used by RS-232. Within the interface hierarchy, it belongs to the RS-232 transceiver family, interface IC category, and broader data-communications semiconductor ecosystem. This multi-function integration reduces the number of external components required for a working serial port.
The MAX3243 combines a 3 V to 5.5 V operating range with a 250 kbps maximum signaling rate. Its ±15 kV ESD protection is a key feature for systems exposed to electrostatic discharge through cables and connectors. The 28-pin TSSOP offers adequate pin density for multichannel RS-232 implementations while supporting automated surface-mount assembly.
The manufacturer rates the MAX3243 family for 250 kbps operation, allowing it to support common serial-control links, point-to-point data channels, and legacy peripheral interfaces. Its integrated transceiver architecture is intended to simplify the external RS-232 interface compared with separate drivers, receivers, and charge-pump circuits. Design validation should confirm signal levels, timing, capacitance, and cable requirements against the application operating conditions.
Typical uses include industrial control consoles, data-acquisition equipment, test-and-measurement instruments, communications adapters, and service-port interfaces. The part is particularly useful when a compact board needs multiple RS-232 lines, a 250 kbps data-rate ceiling, and stronger ESD protection than an unprotected transceiver. System designers should also allow for connector selection, signal-return routing, and appropriate chassis grounding.
The principal design consideration is ensuring that every connected RS-232 signal uses the correct driver or receiver direction and that no device presents an inappropriate output conflict. Keep interface traces away from noisy power paths, use the datasheet-recommended charge-pump capacitors, and confirm the external line-termination arrangement before releasing a production layout.
This page organizes the MAX3243IPWRDL electrical characteristics, sourcing information, drop-in candidates, application guidance, and PCB considerations into a design-oriented component reference. It also distinguishes documented functions from parameters that require confirmation against the current manufacturer datasheet before schematic release.
এর জন্য ড্রপ-ইন বিকল্প MAX3243IPWRDL — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible MAX3243IPWRDL (একই form factor এবং footprint) — পার্থক্য রয়েছে ESD Protection, Maximum Data Rate, Product Type, Package, Operating Temperature Range.
MAX3243IPWR
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
MAX3243EIPWR
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়মূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →MAX3243IPWRDL বিশেষণ
| Product Type | Multichannel RS-232 line driver/receiver |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| ESD Protection | ±15 kV |
| Interface Standard | RS-232 |
| Package Type | 28-pin TSSOP |
| মাউন্টিং টাইপ | Surface mount |
MAX3243IPWRDL 28-pin tssop পিন কনফিগারেশন গাইড
MAX3243IPWRDL (28-pin tssop প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MAX3243IPWRDL.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
MAX3243IPWRDL এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Control Console, Data-Acquisition Equipment, Test and Measurement Instrument, Serial Communications Adapter, Point-of-Service Terminal, Embedded Maintenance Port.
Industrial Control Console
The MAX3243IPWRDL is appropriate for an industrial controller that exchanges RS-232 commands with local equipment. Its 3 V to 5.5 V supply range supports common embedded logic rails, while the 250 kbps data-rate capability is sufficient for configuration, status, and diagnostic traffic. The ±15 kV ESD rating adds useful protection where the port connects to an external cable. Place the IC near the DB9 or equivalent connector, route each driver and receiver to its assigned line, and use the datasheet-recommended charge-pump capacitors to maintain valid RS-232 levels. Industrial enclosure grounding and signal-return practices remain essential because the IC protects the interface electronics but does not replace a properly engineered connector and cabling system.
সুপারিশকৃত
Data-Acquisition Equipment
A data-acquisition instrument can use the MAX3243IPWRDL for a multichannel RS-232 connection to a host computer or service interface. The 250 kbps maximum rate supports moderate-rate commands and status transfers without requiring a high-speed differential interface. Its 28-pin TSSOP package keeps the transceiver compact, and the 3 V to 5.5 V operating range allows direct integration with 3.3 V or 5 V digital systems. Use the application schematic as the starting point for charge-pump capacitance and power placement. Keep the transceiver and connector interface region together on the PCB, separate them from switching supplies and high-current return paths, and verify that firmware respects the supported line rate and electrical timing of the MAX3243 family.
সুপারিশকৃত
Test and Measurement Instrument
The MAX3243IPWRDL fits bench instruments that need a legacy RS-232 service or control port for connection to older test systems. The 250 kbps signaling rate is aligned with command-oriented serial traffic, and ±15 kV ESD protection is useful on instrument ports exposed to operator cabling. The 28-pin TSSOP allows the interface to be placed close to the rear-panel connector while preserving board area for the instrument’s primary measurement circuitry. Follow the Texas Instruments application guidance for charge-pump capacitors and supply routing. Use shielded cable where required, provide a stable signal reference through the connector shell, and test both driven and received lines against the system’s noise and grounding requirements before production release.
সুপারিশকৃত
Serial Communications Adapter
A communications adapter can use the MAX3243IPWRDL as the RS-232 physical-layer element between a UART and an external D-sub or terminal connection. The multichannel architecture allows several RS-232 paths to be implemented in one compact device, while the 3 V to 5.5 V supply range accommodates both 3.3 V and 5 V UART platforms. At a maximum 250 kbps, the interface targets conventional RS-232 control and data links rather than high-speed differential protocols. Respect the electrical limits of every connected driver, assign unused lines according to the datasheet, and keep the connector return path continuous. The external connector, protection network, and cable selection must be coordinated with the ±15 kV ESD capability of the transceiver.
সুপারিশকৃত
Point-of-Service Terminal
The MAX3243IPWRDL can support a point-of-service terminal or service console that must exchange low-bandwidth commands with peripheral equipment over RS-232. Its 250 kbps maximum rate covers routine transaction and diagnostic traffic, and its TSSOP package supports compact controller-board layouts. The 3 V to 5.5 V supply range allows the interface to operate from the same rail family commonly used by embedded processors, subject to the complete power-tree design. Place input and output lines according to their driver or receiver roles, avoid connecting an active driver to another active driver, and provide the recommended charge-pump capacitors. Validate the port for surge, ESD, and ground-offset conditions that can occur between connected peripheral equipment.
সুপারিশকৃত
Embedded Maintenance Port
The MAX3243IPWRDL is useful for an embedded maintenance interface that provides technicians with a wired diagnostic connection to a controller. The interface can operate at up to 250 kbps, allowing command, log, and configuration transfers while keeping the implementation electrically simple. The ±15 kV ESD protection rating is relevant because maintenance ports are frequently connected to unknown external equipment in service environments. Route the connector-side nets directly toward the transceiver and away from motor-control and power-conversion nodes. Implement the manufacturer’s charge-pump and layout recommendations, verify the transceiver’s operating-temperature grade against the enclosure environment, and use an appropriate connector shield and chassis reference to prevent cable-borne transients from bypassing the intended protection path.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MAX3243IPWRDL — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | MAX3243IPWR | MAX3243EIPWR |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 28-pin TSSOP | 28-pin TSSOP - same package family | 28-pin TSSOP - same package family |
| Product Type | Multichannel RS-232 line driver/receiver | Multichannel RS-232 line driver/receiver | Multichannel RS-232 line driver/receiver |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps | 250 kbps | 250 kbps |
| ESD Protection | ±15 kV | ±15 kV | ±15 kV |
মূল পার্থক্যসমূহ
- Single IC integrates multichannel RS-232 line-driver and receiver functions (বনামDiscrete driver and receiver implementations)
- Supports operation from both common embedded logic rails (বনামFixed 5 V RS-232 transceivers)
- Provides substantial ESD protection for a cable-connected interface (বনামUnprotected RS-232 transceiver implementations)
- Maintains a practical 250 kbps serial-data ceiling (বনামLower-speed RS-232 interface solutions)
ডিজাইন নোট
Place the MAX3243IPWRDL close to the RS-232 connector and route connector-side nets directly to their assigned pins. Keep charge-pump capacitors close to their documented IC pins, use a short ground return, and isolate the interface region from switching converters and high-current logic. A compact connector-to-transceiver path also improves the practical effectiveness of the ±15 kV ESD protection.
Do not connect two active RS-232 drivers to the same line, and do not treat every TX and RX net as interchangeable. Map each signal against the MAX3243 pin-description table, verify unused-line states, and preserve the datasheet-recommended charge-pump capacitor values. A pinout or function copied from another RS-232 family can create an output conflict even when the connector and package appear similar.
Design the 3 V to 5.5 V supply rail with local decoupling and verify startup behavior at both common system voltages. Follow the manufacturer’s typical application circuit for the charge-pump network and place its capacitors close to the relevant device pins. Check supply current and line-loading behavior against the complete design because additional system loads can affect the available margin.
Maintain a continuous signal reference between the transceiver and connector ground, and use the connector shell for chassis grounding according to the equipment design. Avoid long RS-232 traces and keep them away from switching nodes and inductors. If the port crosses a ground-potential difference, add suitable isolation and protection rather than relying on the MAX3243 internal ESD structures for every system-level transient.
কমপ্লায়েন্স তথ্য
Compliance status must be confirmed for the exact MAX3243IPWRDL ordering code using the Texas Instruments product page and manufacturer datasheet.