Texas Instruments

MAX3243IPWRDL - 250kbps RS-232 IC | Texas Instruments

MPN: MAX3243IPWRDL ✓ 啟用中
3 V to 5.5 V Vdss 28-pin TSSOP Package
MOQ: 1 |

MAX3243IPWRDL 概覽

Texas Instruments MAX3243IPWRDL is a multichannel RS-232 line driver and receiver IC operating from 3 V to 5.5 V, with a maximum data rate of 250 kbps and ±15 kV ESD protection. The device is packaged in a 28-pin TSSOP, making it suitable for compact serial-interface equipment where logic-level UART signals must connect to external RS-232 ports.

An RS-232 transceiver is an interface IC that combines line drivers, receivers, and charge-pump voltage conversion to translate between CMOS/TTL logic levels and the bipolar voltage levels used by RS-232. Within the interface hierarchy, it belongs to the RS-232 transceiver family, interface IC category, and broader data-communications semiconductor ecosystem. This multi-function integration reduces the number of external components required for a working serial port.

The MAX3243 combines a 3 V to 5.5 V operating range with a 250 kbps maximum signaling rate. Its ±15 kV ESD protection is a key feature for systems exposed to electrostatic discharge through cables and connectors. The 28-pin TSSOP offers adequate pin density for multichannel RS-232 implementations while supporting automated surface-mount assembly.

The manufacturer rates the MAX3243 family for 250 kbps operation, allowing it to support common serial-control links, point-to-point data channels, and legacy peripheral interfaces. Its integrated transceiver architecture is intended to simplify the external RS-232 interface compared with separate drivers, receivers, and charge-pump circuits. Design validation should confirm signal levels, timing, capacitance, and cable requirements against the application operating conditions.

Typical uses include industrial control consoles, data-acquisition equipment, test-and-measurement instruments, communications adapters, and service-port interfaces. The part is particularly useful when a compact board needs multiple RS-232 lines, a 250 kbps data-rate ceiling, and stronger ESD protection than an unprotected transceiver. System designers should also allow for connector selection, signal-return routing, and appropriate chassis grounding.

The principal design consideration is ensuring that every connected RS-232 signal uses the correct driver or receiver direction and that no device presents an inappropriate output conflict. Keep interface traces away from noisy power paths, use the datasheet-recommended charge-pump capacitors, and confirm the external line-termination arrangement before releasing a production layout.

This page organizes the MAX3243IPWRDL electrical characteristics, sourcing information, drop-in candidates, application guidance, and PCB considerations into a design-oriented component reference. It also distinguishes documented functions from parameters that require confirmation against the current manufacturer datasheet before schematic release.

直接替換替代品,適用於 MAX3243IPWRDL — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: MAX3243IPWRDL (相同外形與佔位) — 差異在於 ESD Protection, Maximum Data Rate, Product Type, Package, Operating Temperature Range.

Texas Instruments
ESD Protection: ±15 kV HBM
Package: 28-pin SOIC
Operating Temperature Range: 0°C to 70°C
比較對象 MAX3243IPWRDL →
Texas Instruments
ESD Protection: ±15 kV IEC ESD
Maximum Data Rate: 500 kbps
Package: 28-pin TSSOP
比較對象 MAX3243IPWRDL →
Texas Instruments
ESD Protection: ±15 kV HBM
Product Type: Multichannel RS-232 line driver and receiver
Package: 28-pin TSSOP
比較對象 MAX3243IPWRDL →

MAX3243IPWR

✅ 直接替換 ⚠️ 規格未經驗證
📦 28-pin TSSOP
Ordering suffix differs by one code; supply range, 250 kbps data rate, ±15 kV ESD protection, and 28-pin TSSOP family are retained.

📋 參考替代品(不在目錄中)

MAX3243EIPWR

✅ 直接替換 ⚠️ 規格未經驗證
Texas Instruments
📦 28-pin TSSOP
Multichannel RS-232 line driver/receiver · 3 V to 5.5 V · 500 kbps · 3 channels · 5 channels · 3.3 V · plus or minus 15 kV IEC ESD protection · -40°C to +85°C

聯絡詢價

查看資料表 →

MAX3243IPWRDL 規格

Product Type Multichannel RS-232 line driver/receiver
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbps
ESD Protection ±15 kV
Interface Standard RS-232
Package Type 28-pin TSSOP
安裝類型 Surface mount

MAX3243IPWRDL 28-pin tssop 腳位配置指南

MAX3243IPWRDL(28-pin tssop 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

MAX3243IPWRDL 的 28-pin tssop 封裝腳位圖

無詳細腳位定義資料: MAX3243IPWRDL.

請參閱 資料表 以查看完整腳位配置。

典型應用

MAX3243IPWRDL 適用於 6 應用s: Industrial Control Console, Data-Acquisition Equipment, Test and Measurement Instrument, Serial Communications Adapter, Point-of-Service Terminal, Embedded Maintenance Port.

🏭

Industrial Control Console

The MAX3243IPWRDL is appropriate for an industrial controller that exchanges RS-232 commands with local equipment. Its 3 V to 5.5 V supply range supports common embedded logic rails, while the 250 kbps data-rate capability is sufficient for configuration, status, and diagnostic traffic. The ±15 kV ESD rating adds useful protection where the port connects to an external cable. Place the IC near the DB9 or equivalent connector, route each driver and receiver to its assigned line, and use the datasheet-recommended charge-pump capacitors to maintain valid RS-232 levels. Industrial enclosure grounding and signal-return practices remain essential because the IC protects the interface electronics but does not replace a properly engineered connector and cabling system.

📡

Data-Acquisition Equipment

A data-acquisition instrument can use the MAX3243IPWRDL for a multichannel RS-232 connection to a host computer or service interface. The 250 kbps maximum rate supports moderate-rate commands and status transfers without requiring a high-speed differential interface. Its 28-pin TSSOP package keeps the transceiver compact, and the 3 V to 5.5 V operating range allows direct integration with 3.3 V or 5 V digital systems. Use the application schematic as the starting point for charge-pump capacitance and power placement. Keep the transceiver and connector interface region together on the PCB, separate them from switching supplies and high-current return paths, and verify that firmware respects the supported line rate and electrical timing of the MAX3243 family.

🔧

Test and Measurement Instrument

The MAX3243IPWRDL fits bench instruments that need a legacy RS-232 service or control port for connection to older test systems. The 250 kbps signaling rate is aligned with command-oriented serial traffic, and ±15 kV ESD protection is useful on instrument ports exposed to operator cabling. The 28-pin TSSOP allows the interface to be placed close to the rear-panel connector while preserving board area for the instrument’s primary measurement circuitry. Follow the Texas Instruments application guidance for charge-pump capacitors and supply routing. Use shielded cable where required, provide a stable signal reference through the connector shell, and test both driven and received lines against the system’s noise and grounding requirements before production release.

🌐

Serial Communications Adapter

A communications adapter can use the MAX3243IPWRDL as the RS-232 physical-layer element between a UART and an external D-sub or terminal connection. The multichannel architecture allows several RS-232 paths to be implemented in one compact device, while the 3 V to 5.5 V supply range accommodates both 3.3 V and 5 V UART platforms. At a maximum 250 kbps, the interface targets conventional RS-232 control and data links rather than high-speed differential protocols. Respect the electrical limits of every connected driver, assign unused lines according to the datasheet, and keep the connector return path continuous. The external connector, protection network, and cable selection must be coordinated with the ±15 kV ESD capability of the transceiver.

🖥️

Point-of-Service Terminal

The MAX3243IPWRDL can support a point-of-service terminal or service console that must exchange low-bandwidth commands with peripheral equipment over RS-232. Its 250 kbps maximum rate covers routine transaction and diagnostic traffic, and its TSSOP package supports compact controller-board layouts. The 3 V to 5.5 V supply range allows the interface to operate from the same rail family commonly used by embedded processors, subject to the complete power-tree design. Place input and output lines according to their driver or receiver roles, avoid connecting an active driver to another active driver, and provide the recommended charge-pump capacitors. Validate the port for surge, ESD, and ground-offset conditions that can occur between connected peripheral equipment.

🔧

Embedded Maintenance Port

The MAX3243IPWRDL is useful for an embedded maintenance interface that provides technicians with a wired diagnostic connection to a controller. The interface can operate at up to 250 kbps, allowing command, log, and configuration transfers while keeping the implementation electrically simple. The ±15 kV ESD protection rating is relevant because maintenance ports are frequently connected to unknown external equipment in service environments. Route the connector-side nets directly toward the transceiver and away from motor-control and power-conversion nodes. Implement the manufacturer’s charge-pump and layout recommendations, verify the transceiver’s operating-temperature grade against the enclosure environment, and use an appropriate connector shield and chassis reference to prevent cable-borne transients from bypassing the intended protection path.

What is the operating voltage of MAX3243IPWRDL?
The MAX3243IPWRDL operates from 3 V to 5.5 V. According to the Texas Instruments MAX3243 manufacturer datasheet, this range supports both 3 V and 5 V system rails while supporting RS-232 operation at up to 250 kbps. Confirm the selected rail and the power-up sequence against the device's absolute-maximum and recommended operating conditions before finalizing the schematic.
What are the key specifications of MAX3243IPWRDL that engineers should know?
The MAX3243IPWRDL is a multichannel RS-232 transceiver with a 3 V to 5.5 V supply range, a 250 kbps maximum data rate, ±15 kV ESD protection, and a 28-pin TSSOP package. The Texas Instruments MAX3243 manufacturer datasheet identifies it as a line driver/receiver intended for compact, surface-mount serial-interface equipment.
Where can I download the MAX3243IPWRDL datasheet PDF?
The MAX3243IPWRDL datasheet PDF is available from the Texas Instruments MAX3243 product page at https://www.ti.com/lit/ds/symlink/max3243.pdf. The document contains the electrical characteristics, pin descriptions, application information, package dimensions, and ordering information needed to evaluate the device. Use the pin-description and typical-application sections when assigning PCB connections.
Where can I find the MAX3243IPWRDL pinout?
The MAX3243IPWRDL pinout is identified in the Texas Instruments MAX3243 manufacturer datasheet, where the 28-pin TSSOP pin description follows the package drawing and numbering convention. The part has a 28-pin TSSOP package. Before routing a board, map each signal to the numbered package drawing and use the datasheet's no-connect guidance where applicable.
What can replace the MAX3243IPWRDL?
The MAX3243IPWR can serve as a same-family drop-in candidate for the MAX3243IPWRDL when its order codes and temperature grade match the intended assembly. The MAX3243EIPWR is another same-family 28-pin TSSOP candidate, but its extended-temperature characteristics must be checked against the target design. No qualifying cross-brand replacements were identified, so PCB and qualification changes should not be assumed.
Is MAX3243IPWRDL the same as MAX3243IPWR?
The MAX3243IPWRDL and MAX3243IPWR belong to the same MAX3243 family and use the 28-pin TSSOP device family, but their ordering suffixes can encode manufacturing, shipping, or environmental requirements. Before treating MAX3243IPWR as a drop-in substitute, compare the orderable-device table in the Texas Instruments MAX3243 manufacturer datasheet for temperature range, tape-and-reel status, and package details.
Where can I buy MAX3243IPWRDL online?
Use the Request a Quote form on this page to request MAX3243IPWRDL availability, current commercial terms, and a proposed order quantity. The 28-pin TSSOP package and 3 V to 5.5 V supply requirement should be confirmed before quotation. XAIPART will return a current response through the quote process rather than presenting a static commercial figure.
What is the price of MAX3243IPWRDL?
Current commercial pricing for MAX3243IPWRDL should be requested through the Request a Quote form on this page. The quoted response can account for the exact order quantity, 28-pin TSSOP assembly requirements, delivery schedule, and requested shipment destination. Use the same form for a formal procurement record and for volume pricing review.
What is the lead time for MAX3243IPWRDL?
Request the current lead time and minimum order quantity through the Request a Quote form on this page. Lead time can vary with order volume, package configuration, and inventory position, so a procurement response should state the requested quantity and destination explicitly. The exact MAX3243IPWRDL ordering code should appear on the quotation for traceability.
Is MAX3243IPWRDL in stock?
Submit the MAX3243IPWRDL inquiry through the Request a Quote form on this page to obtain a current availability response. The request should identify the required quantity and whether the 28-pin TSSOP shipping configuration is acceptable. Availability should be confirmed at order placement because stock status can change during fulfillment.
When should I choose MAX3243IPWRDL instead of another RS-232 transceiver?
Choose the MAX3243IPWRDL when a design needs a 3 V to 5.5 V supply, RS-232 operation up to 250 kbps, ±15 kV ESD protection, and a 28-pin TSSOP implementation. It is less suitable if a design requires a different package, a substantially higher data rate, or a different channel count. Validate every pin, voltage, and timing requirement before using another family member as a substitute.
Is MAX3243IPWRDL suitable for industrial equipment?
The MAX3243IPWRDL is suitable for compact equipment that needs a 250 kbps RS-232 interface, 3 V to 5.5 V operation, and ±15 kV ESD protection. Industrial suitability also depends on the ordered temperature grade, available operating-temperature limits, isolation requirements, and environmental qualification. Confirm those conditions in the Texas Instruments MAX3243 manufacturer datasheet before deployment.
What is the difference between MAX3243IPWRDL and MAX3243EIPWR?
The MAX3243EIPWR is a same-family MAX3243 variant offered in the same 28-pin TSSOP package, while the MAX3243IPWRDL is the specified ordering code for the target device. The principal design comparison is the temperature-grade and order-code difference associated with the E designation. Confirm electrical limits, pin functions, and qualification status before interchange.
MAX3243IPWRDL versus MAX3243IPWR — which is better for a new design?
The MAX3243IPWRDL is preferable when it matches the required environmental grade and shipping configuration for the new design. The MAX3243IPWR may be selected when its orderable-device details satisfy the same requirements and it offers the desired procurement configuration. Because both are in the same MAX3243 family, the decisive checks are ordering suffix, temperature range, and package delivery method.
What is the best cross-brand equivalent for MAX3243IPWRDL?
No cross-brand drop-in equivalent is established for the MAX3243IPWRDL in the available cross-reference information. A second-source decision should require matching the 28-pin TSSOP footprint, RS-232 electrical behavior, 3 V to 5.5 V supply operation, 250 kbps data rate, and required temperature and compliance levels. A functional RS-232 transceiver from another manufacturer should not be treated as a drop-in part without that verification.

工程參考資料,適用於 MAX3243IPWRDL — 比較、設計指引及合規資訊。

選型指南

Choose MAX3243IPWRDL when the design requires a multichannel RS-232 interface operating from a 3 V to 5.5 V rail, a data rate up to 250 kbps, and ±15 kV ESD protection in a 28-pin TSSOP. MAX3243IPWR is the closest same-family option when its ordering suffix, environmental grade, and shipment configuration meet the production requirements. MAX3243EIPWR may be preferable when the E-designated temperature grade is required, but its operating limits should be checked against the enclosure environment. No cross-brand drop-in candidate is established, so do not substitute another manufacturer’s RS-232 transceiver without verifying the footprint, pin functions, voltage levels, data rate, timing, temperature range, and protection behavior. If the design requires substantially more channels, a data rate above 250 kbps, or a different package, it is better to change the PCB and select a purpose-built interface IC than to force a footprint-level replacement.

與替代品比較

參數 本產品 MAX3243IPWR MAX3243EIPWR
Brand Texas Instruments Texas Instruments Texas Instruments
Package 28-pin TSSOP 28-pin TSSOP - same package family 28-pin TSSOP - same package family
Product Type Multichannel RS-232 line driver/receiver Multichannel RS-232 line driver/receiver Multichannel RS-232 line driver/receiver
Supply Voltage Range 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V
Maximum Data Rate 250 kbps 250 kbps 250 kbps
ESD Protection ±15 kV ±15 kV ±15 kV

主要差異化特點

  • Single IC integrates multichannel RS-232 line-driver and receiver functions (對比Discrete driver and receiver implementations)
  • Supports operation from both common embedded logic rails (對比Fixed 5 V RS-232 transceivers)
  • Provides substantial ESD protection for a cable-connected interface (對比Unprotected RS-232 transceiver implementations)
  • Maintains a practical 250 kbps serial-data ceiling (對比Lower-speed RS-232 interface solutions)

設計說明

Place the MAX3243IPWRDL close to the RS-232 connector and route connector-side nets directly to their assigned pins. Keep charge-pump capacitors close to their documented IC pins, use a short ground return, and isolate the interface region from switching converters and high-current logic. A compact connector-to-transceiver path also improves the practical effectiveness of the ±15 kV ESD protection.

Do not connect two active RS-232 drivers to the same line, and do not treat every TX and RX net as interchangeable. Map each signal against the MAX3243 pin-description table, verify unused-line states, and preserve the datasheet-recommended charge-pump capacitor values. A pinout or function copied from another RS-232 family can create an output conflict even when the connector and package appear similar.

Design the 3 V to 5.5 V supply rail with local decoupling and verify startup behavior at both common system voltages. Follow the manufacturer’s typical application circuit for the charge-pump network and place its capacitors close to the relevant device pins. Check supply current and line-loading behavior against the complete design because additional system loads can affect the available margin.

Maintain a continuous signal reference between the transceiver and connector ground, and use the connector shell for chassis grounding according to the equipment design. Avoid long RS-232 traces and keep them away from switching nodes and inductors. If the port crosses a ground-potential difference, add suitable isolation and protection rather than relying on the MAX3243 internal ESD structures for every system-level transient.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

Compliance status must be confirmed for the exact MAX3243IPWRDL ordering code using the Texas Instruments product page and manufacturer datasheet.

資料驗證日期: 2026-11-06 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

MAX3243IPWRDL datasheet MAX3243IPWRDL specifications MAX3243IPWRDL pinout MAX3243IPWRDL datasheet pdf MAX3243IPWRDL equivalent MAX3243IPWRDL replacement MAX3243IPWRDL price MAX3243IPWRDL stock MAX3243IPWRDL 250kbps RS-232 MAX3243IPWRDL 28-TSSOP Texas Instruments MAX3243IPWRDL MAX3243IPWRDL vs MAX3243IPWR MAX3243IPWRDL RS-232 interface MAX3243IPWRDL ESD protection MAX3243IPWRDL schematic

相關元件與詞彙

Texas Instruments MAX3243IPWRDL MAX3243IPWR MAX3243EIPWR MAX3243 RS-232 transceiver line driver line receiver interface IC serial communications IC CMOS logic TTL logic ESD protection 250 kbps 3 V to 5.5 V 28-pin TSSOP TSSOP package family surface-mount package charge-pump voltage converter industrial control data-acquisition equipment test and measurement communications adapter point-of-service terminal embedded maintenance port
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情