MAX3381ECUP+ - 2Tx/2Rx RS-232 Transceiver | Analog Devices
MPN: MAX3381ECUP+ ✓ সক্রিয়MAX3381ECUP+ সারাংশ
An RS-232 transceiver is an interface IC that converts between single-ended logic-level signals and the bipolar voltage levels used by RS-232 equipment. Within the interface hierarchy, it belongs to the RS-232 transceiver class, communication interface IC family, and broader semiconductor category. Two transmitters and two receivers allow one device to support a complete point-to-point or multi-drop serial connection when the system bus rules are observed.
The MAX3381ECUP+ provides 15 kV ESD protection on both its RS-232 I/O pins and logic pins. This protection is particularly useful in industrial, industrial-control, and equipment environments where cables can be touched or exposed to electrostatic discharge. Its 2.35 V minimum supply voltage also supports systems that cannot rely on a regulated 3.3 V or 5 V rail.
The MAX3381E family is designed for low-power operation while retaining high data-rate performance. The integrated charge-pump circuitry required for RS-232 voltage generation is contained in the interface IC, reducing the number of external components needed for a working communication port. The MAX3381ECUP+ is identified as a 2/2 full RS-232 transceiver in a 20-TSSOP package.
Typical applications include serial service consoles, data-acquisition equipment, industrial control links, test and measurement instruments, and embedded systems that communicate with legacy RS-232 peripherals. The dual-channel arrangement is useful for designs requiring two serial paths, or one link in each direction, without using two separate interface devices.
PCB implementation should preserve the device's pinout and follow the manufacturer layout guidance. Place the required passives close to their associated pins, route the RS-232 traces away from sensitive analog and clock signals, and use suitable protection and grounding practices for cables entering the enclosure. Confirm the exact pin functions and external-component values against the manufacturer datasheet before releasing the layout.
This product page consolidates the verified operating range, channel configuration, ESD rating, package information, same-footprint alternatives, and application-oriented design guidance. It is intended to help engineers evaluate the MAX3381ECUP+ quickly while keeping the final schematic, PCB, and component decisions grounded in manufacturer documentation.
এর জন্য ড্রপ-ইন বিকল্প MAX3381ECUP+ — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible MAX3381ECUP+ (একই form factor এবং footprint) — পার্থক্য রয়েছে Mounting Type, Package, Communication Standard, Interface Standard, Logic Pin ESD Protection.
MAX3381EEUP+
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →MAX3381EUP+
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
MAX3381CUP+
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
MAX3380EEUP+
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়মূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →MAX3380EUP+
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
MAX3381ECUP+ বিশেষণ
| Product Type | RS-232 transceiver |
| Transmitter Count | 2 |
| Receiver Count | 2 |
| Supply Voltage Range | +2.35 V to +5.5 V |
| Listed Supply Current | 1 A |
| Communication Standard | EIA/TIA-232 |
| Interface Standard | V.28/V.24 |
| ESD Protection | 15 kV |
| ESD Protected Pins | RS-232 I/O pins and logic pins |
| প্যাকেজ | 20-TSSOP |
| মাউন্টিং টাইপ | Surface mount |
MAX3381ECUP+ 20-tssop পিন কনফিগারেশন গাইড
MAX3381ECUP+ (20-tssop প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MAX3381ECUP+.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
MAX3381ECUP+ এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Serial Control, Data-Acquisition Equipment, Test and Measurement Instruments, Embedded RS-232 Service Port, Point-to-Point Serial Link, Legacy Peripheral Connectivity.
Industrial Serial Control
The MAX3381ECUP+ fits industrial serial-control equipment that must communicate with RS-232 test heads, programmable controllers, or legacy service ports. Its two transmitters and two receivers support two serial channels in one 20-TSSOP device, reducing the number of interface packages on the board. The +2.35 V to +5.5 V supply range supports both low-voltage and 5 V system rails. Its 15 kV ESD protection on I/O and logic pins adds useful protection where connected cables may be touched during installation or maintenance. Because it is a transceiver rather than an isolated interface, the chassis, signal ground, and cable-routing strategy still require careful attention.
সুপারিশকৃত
Data-Acquisition Equipment
The MAX3381ECUP+ can connect laboratory and industrial data-acquisition equipment to RS-232 instruments, analyzers, and legacy peripheral buses. The 2/2 architecture permits one transmit and one receive path for control and data traffic, or two independent links when the system wiring permits. Its low-power RS-232 interface avoids adding discrete charge-pump components to the board. The broad +2.35 V to +5.5 V operating range simplifies interface design around different embedded processors. The 15 kV ESD rating is especially relevant to bench equipment with frequently connected cables, although it does not replace proper cable strain relief, grounding, or isolation.
সুপারিশকৃত
Test and Measurement Instruments
The MAX3381ECUP+ is well suited to RS-232 communication ports on oscilloscopes, programmable supplies, bench meters, and automated test equipment. Two receivers and two transmitters provide flexible channel allocation for command, response, synchronization, or firmware-update links. The 20-TSSOP package keeps the interface compact, while the integrated RS-232 functions reduce external component count. According to the Analog Devices MAX3381E family information, the device combines low power requirements with high data-rate capability and enhanced ESD protection. These characteristics suit portable and rack-mounted instruments where the communication connector may be exposed to electrostatic discharge during routine operation.
সুপারিশকৃত
Embedded RS-232 Service Port
The MAX3381ECUP+ supports an embedded service or configuration port in industrial controllers, gateways, and embedded computing systems that must retain an RS-232 interface. Its two transmitters and two receivers allow the product to present more than one logical serial endpoint without using separate transceiver packages. The minimum +2.35 V supply supports integration with compact low-voltage logic, while operation up to +5.5 V accommodates conventional 5 V interface circuits. The 15 kV ESD protection on both logic and RS-232 pins improves robustness at a connector boundary where static discharge is likely. Designers should still implement the manufacturer-recommended passives and maintain the interface ground reference.
সুপারিশকৃত
Point-to-Point Serial Link
The MAX3381ECUP+ can implement a full-duplex point-to-point RS-232 link between two systems when each endpoint requires one transmitter and one receiver. The remaining channels can be assigned to control or secondary communication paths, giving designers more integration flexibility than a single-channel transceiver. Its +2.35 V to +5.5 V range accommodates several embedded supply levels, and the 20-TSSOP package simplifies compact board placement. The device's 15 kV ESD protection applies to both the cable-facing I/O pins and logic pins, making it useful in equipment with exposed connectors. Signal integrity and ground-reference design remain essential because the transceiver does not provide galvanic isolation.
সুপারিশকৃত
Legacy Peripheral Connectivity
The MAX3381ECUP+ allows modern embedded equipment to retain compatibility with legacy RS-232 printers, scanners, controllers, and diagnostic adapters. Its two transmitters and two receivers support multiple legacy functions or two separate cable ports within one package. The wide +2.35 V to +5.5 V supply range permits operation alongside modern embedded logic, while the integrated interface reduces the external component burden compared with a discrete transmitter and receiver implementation. The 15 kV ESD protection on I/O and logic pins helps manage static discharge at the connector. Firmware must still manage RS-232 direction control, baud timing, and any shared-bus restrictions imposed by the attached peripheral.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MAX3381ECUP+ — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | MAX3381EEUP+ | MAX3381EUP+ | MAX3381CUP+ | MAX3380EEUP+ | MAX3380EUP+ |
|---|---|---|---|---|---|---|
| Package | 20-TSSOP | 20-TSSOP - same | 20-TSSOP - same | 20-TSSOP - same | 20-TSSOP - same | 20-TSSOP - same |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Transmitter Count | 2 | 2 | 2 | 2 | 2 | 2 |
| Receiver Count | 2 | 2 | 2 | 2 | 2 | 2 |
| Supply Voltage Range | +2.35 V to +5.5 V | +2.35 V to +5.5 V | +2.35 V to +5.5 V | +2.35 V to +5.5 V | +2.35 V to +5.5 V | +2.35 V to +5.5 V |
| Communication Standard | EIA/TIA-232 and V.28/V.24 | EIA/TIA-232 and V.28/V.24 | EIA/TIA-232 and V.28/V.24 | EIA/TIA-232 and V.28/V.24 | EIA/TIA-232 and V.28/V.24 | EIA/TIA-232 and V.28/V.24 |
| Receiver-Enable Behavior | MAX3381E family behavior | MAX3381E family behavior | MAX3381E family behavior | MAX3381C family behavior | MAX3380E receiver-enable arrangement | MAX3380E receiver-enable arrangement |
মূল পার্থক্যসমূহ
- Two transmitters and two receivers in one interface device (বনামMAX3381EEUP+)
- Documented direct substitute within the MAX3381E family (বনামMAX3381EEUP+)
- Broader transceiver selection without changing the PCB footprint (বনামMAX3380EEUP+)
- 15 kV ESD protection covers both interface and logic sides (বনামMAX3381CUP+)
ডিজাইন নোট
Use the Analog Devices MAX3381E datasheet pin table as the authoritative assignment for all 20 TSSOP terminals. Place charge-pump and interface capacitors close to their designated pins, keep TXOUT and RIN traces away from clocks, sensors, and ADC inputs, and avoid routing the RS-232 connector path beneath sensitive analog circuitry. Confirm whether the exposed board ground requires a particular copper treatment under the package.
Do not treat the MAX3381ECUP+ as an isolated RS-232 interface. The signal-ground relationship between the transceiver and connected equipment affects noise immunity and communication reliability, so the chassis or signal-ground strategy must be defined at the system level. Avoid shared-bus connections unless every attached device and software driver is designed for that topology; otherwise assign independent transmitter and receiver channels.
The dual-channel 2/2 architecture can help separate command and data traffic, but it can also create simultaneous switching paths on the board. Route each RS-232 pair with a continuous ground reference where the interface standard and cable construction permit it, use controlled connector transitions, and keep the external cable away from sensitive circuits inside the enclosure. Validate conducted and radiated emissions at the finished-product level.
Design the supply rail for the complete transceiver and connector load rather than assuming a nominal logic rail is sufficient. The MAX3381ECUP+ operates from +2.35 V to +5.5 V, but the selected voltage must also satisfy every family variant, temperature condition, and interface load. Place local bypass capacitance at the supply pins and verify startup behavior and supply droop with the actual cable and attached equipment connected.
কমপ্লায়েন্স তথ্য
The verified product information identifies EIA/TIA-232 and V.28/V.24 interface compliance but does not state the requested environmental or automotive declarations.