Analog Devices

MAX3381ECUP+ - 2Tx/2Rx RS-232 Transceiver | Analog Devices

MPN: MAX3381ECUP+ ✓ فعال
+2.35 V to +5.5 V Vdss 1 A Id 20-TSSOP Package
حداقل سفارش: 1 |

MAX3381ECUP+ نمای کلی

Analog Devices MAX3381ECUP+ is a 2-transmitter, 2-receiver RS-232 interface transceiver with a +2.35 V to +5.5 V supply range, 15 kV ESD protection on I/O and logic pins, and a 20-TSSOP package. It combines EIA/TIA-232 and V.28/V.24 communication functions with low power requirements and high data-rate capability.

An RS-232 transceiver is an interface IC that converts between single-ended logic-level signals and the bipolar voltage levels used by RS-232 equipment. Within the interface hierarchy, it belongs to the RS-232 transceiver class, communication interface IC family, and broader semiconductor category. Two transmitters and two receivers allow one device to support a complete point-to-point or multi-drop serial connection when the system bus rules are observed.

The MAX3381ECUP+ provides 15 kV ESD protection on both its RS-232 I/O pins and logic pins. This protection is particularly useful in industrial, industrial-control, and equipment environments where cables can be touched or exposed to electrostatic discharge. Its 2.35 V minimum supply voltage also supports systems that cannot rely on a regulated 3.3 V or 5 V rail.

The MAX3381E family is designed for low-power operation while retaining high data-rate performance. The integrated charge-pump circuitry required for RS-232 voltage generation is contained in the interface IC, reducing the number of external components needed for a working communication port. The MAX3381ECUP+ is identified as a 2/2 full RS-232 transceiver in a 20-TSSOP package.

Typical applications include serial service consoles, data-acquisition equipment, industrial control links, test and measurement instruments, and embedded systems that communicate with legacy RS-232 peripherals. The dual-channel arrangement is useful for designs requiring two serial paths, or one link in each direction, without using two separate interface devices.

PCB implementation should preserve the device's pinout and follow the manufacturer layout guidance. Place the required passives close to their associated pins, route the RS-232 traces away from sensitive analog and clock signals, and use suitable protection and grounding practices for cables entering the enclosure. Confirm the exact pin functions and external-component values against the manufacturer datasheet before releasing the layout.

This product page consolidates the verified operating range, channel configuration, ESD rating, package information, same-footprint alternatives, and application-oriented design guidance. It is intended to help engineers evaluate the MAX3381ECUP+ quickly while keeping the final schematic, PCB, and component decisions grounded in manufacturer documentation.

جایگزین‌های drop-in برای MAX3381ECUP+ — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای MAX3381ECUP+ (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Mounting Type, Package, Communication Standard, Interface Standard, Logic Pin ESD Protection.

Analog Devices
Package: 20-pin TSSOP
Communication Standard: V.28/V.24
Interface Standard: EIA/TIA-232
مقایسه با MAX3381ECUP+ →
Analog Devices
Mounting Type: Surface-mount TSSOP
Package: 20-pin TSSOP
Logic Pin ESD Protection: ±15 kV
مقایسه با MAX3381ECUP+ →

MAX3381EEUP+

✅ جایگزین مستقیم
Analog Devices
📦 20-TSSOP
RS-232 transceiver interface IC · 2 transmitters · 2 receivers · +2.35 V to +5.5 V · 1 uA · 460 kbps · ±15 kV · ±15 kV

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MAX3381EUP+

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 20-TSSOP
Same 2Tx/2Rx RS-232 configuration and TSSOP-20 footprint; 0% functional channel difference

📋 جایگزین مرجع (خارج از کاتالوگ)

MAX3381CUP+

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 20-TSSOP
Same 2Tx/2Rx RS-232 interface and TSSOP-20 footprint; 0% channel-count difference

📋 جایگزین مرجع (خارج از کاتالوگ)

MAX3380EEUP+

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Analog Devices
📦 20-TSSOP
RS-232 transceiver · 2 · 2 · +2.35 V to +5.5 V · 460 kbps · 15 kV · 15 kV · EIA/TIA-232

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MAX3380EUP+

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 20-TSSOP
Same 2Tx/2Rx TSSOP-20 footprint and supply family; receiver-enable behavior differs by one channel

📋 جایگزین مرجع (خارج از کاتالوگ)

MAX3381ECUP+ مشخصات

Product Type RS-232 transceiver
Transmitter Count 2
Receiver Count 2
Supply Voltage Range +2.35 V to +5.5 V
Listed Supply Current 1 A
Communication Standard EIA/TIA-232
Interface Standard V.28/V.24
ESD Protection 15 kV
ESD Protected Pins RS-232 I/O pins and logic pins
بسته‌بندی 20-TSSOP
نوع نصب Surface mount

راهنمای پیکربندی پین MAX3381ECUP+ 20-tssop

پیکربندی پین برای MAX3381ECUP+ (پکیج 20-tssop). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 20-tssop برای MAX3381ECUP+

داده پین‌آوت تفصیلی موجود نیست برای MAX3381ECUP+.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

MAX3381ECUP+ مناسب است برای 6 کاربردs: Industrial Serial Control, Data-Acquisition Equipment, Test and Measurement Instruments, Embedded RS-232 Service Port, Point-to-Point Serial Link, Legacy Peripheral Connectivity.

🏭

Industrial Serial Control

The MAX3381ECUP+ fits industrial serial-control equipment that must communicate with RS-232 test heads, programmable controllers, or legacy service ports. Its two transmitters and two receivers support two serial channels in one 20-TSSOP device, reducing the number of interface packages on the board. The +2.35 V to +5.5 V supply range supports both low-voltage and 5 V system rails. Its 15 kV ESD protection on I/O and logic pins adds useful protection where connected cables may be touched during installation or maintenance. Because it is a transceiver rather than an isolated interface, the chassis, signal ground, and cable-routing strategy still require careful attention.

📊

Data-Acquisition Equipment

The MAX3381ECUP+ can connect laboratory and industrial data-acquisition equipment to RS-232 instruments, analyzers, and legacy peripheral buses. The 2/2 architecture permits one transmit and one receive path for control and data traffic, or two independent links when the system wiring permits. Its low-power RS-232 interface avoids adding discrete charge-pump components to the board. The broad +2.35 V to +5.5 V operating range simplifies interface design around different embedded processors. The 15 kV ESD rating is especially relevant to bench equipment with frequently connected cables, although it does not replace proper cable strain relief, grounding, or isolation.

🔧

Test and Measurement Instruments

The MAX3381ECUP+ is well suited to RS-232 communication ports on oscilloscopes, programmable supplies, bench meters, and automated test equipment. Two receivers and two transmitters provide flexible channel allocation for command, response, synchronization, or firmware-update links. The 20-TSSOP package keeps the interface compact, while the integrated RS-232 functions reduce external component count. According to the Analog Devices MAX3381E family information, the device combines low power requirements with high data-rate capability and enhanced ESD protection. These characteristics suit portable and rack-mounted instruments where the communication connector may be exposed to electrostatic discharge during routine operation.

🖥️

Embedded RS-232 Service Port

The MAX3381ECUP+ supports an embedded service or configuration port in industrial controllers, gateways, and embedded computing systems that must retain an RS-232 interface. Its two transmitters and two receivers allow the product to present more than one logical serial endpoint without using separate transceiver packages. The minimum +2.35 V supply supports integration with compact low-voltage logic, while operation up to +5.5 V accommodates conventional 5 V interface circuits. The 15 kV ESD protection on both logic and RS-232 pins improves robustness at a connector boundary where static discharge is likely. Designers should still implement the manufacturer-recommended passives and maintain the interface ground reference.

🌐

Point-to-Point Serial Link

The MAX3381ECUP+ can implement a full-duplex point-to-point RS-232 link between two systems when each endpoint requires one transmitter and one receiver. The remaining channels can be assigned to control or secondary communication paths, giving designers more integration flexibility than a single-channel transceiver. Its +2.35 V to +5.5 V range accommodates several embedded supply levels, and the 20-TSSOP package simplifies compact board placement. The device's 15 kV ESD protection applies to both the cable-facing I/O pins and logic pins, making it useful in equipment with exposed connectors. Signal integrity and ground-reference design remain essential because the transceiver does not provide galvanic isolation.

🖨️

Legacy Peripheral Connectivity

The MAX3381ECUP+ allows modern embedded equipment to retain compatibility with legacy RS-232 printers, scanners, controllers, and diagnostic adapters. Its two transmitters and two receivers support multiple legacy functions or two separate cable ports within one package. The wide +2.35 V to +5.5 V supply range permits operation alongside modern embedded logic, while the integrated interface reduces the external component burden compared with a discrete transmitter and receiver implementation. The 15 kV ESD protection on I/O and logic pins helps manage static discharge at the connector. Firmware must still manage RS-232 direction control, baud timing, and any shared-bus restrictions imposed by the attached peripheral.

خلاصه محصولات پیشنهادی

MAX3381EEUP+ Analog Devices استفاده‌شده در: Industrial Serial Control, Data-Acquisition Equipment, Embedded RS-232 Service Port, Legacy Peripheral Connectivity MAX3381EUP+ Same-family RS-232 interface استفاده‌شده در: Industrial Serial Control, Test and Measurement Instruments, Point-to-Point Serial Link MAX3381CUP+ Same-family dual RS-232 interface استفاده‌شده در: Data-Acquisition Equipment, Embedded RS-232 Service Port, Legacy Peripheral Connectivity MAX3380EEUP+ Analog Devices استفاده‌شده در: Test and Measurement Instruments MAX3380EUP+ Same-footprint RS-232 option استفاده‌شده در: Point-to-Point Serial Link
What are the key specifications of MAX3381ECUP+ that engineers should know?
The MAX3381ECUP+ is a 2-transmitter, 2-receiver RS-232 transceiver operating from +2.35 V to +5.5 V in a 20-TSSOP package. Its principal protection feature is 15 kV ESD protection on the RS-232 I/O and logic pins. According to the Analog Devices MAX3381E product information, the device implements EIA/TIA-232 and V.28/V.24 communication functions with low power requirements and high data-rate capability.
Where can I download the MAX3381ECUP+ datasheet PDF?
The MAX3381ECUP+ datasheet and supporting documentation are available from the Analog Devices MAX3381E product page at https://www.analog.com/en/products/max3381e.html. Select the datasheet link on that page to obtain the manufacturer document. The documentation covers the MAX3380E and MAX3381E interface functions, electrical characteristics, and application information needed for schematic and PCB design.
Where can I find the MAX3381ECUP+ pinout?
The MAX3381ECUP+ pinout is shown in the manufacturer datasheet available from the Analog Devices MAX3381E product page. The device uses a 20-TSSOP package, so verify all 20 terminal assignments against the pin-description table before routing a PCB. In particular, confirm supply, ground, transmitter outputs, receiver inputs, and any shutdown or enable functions rather than relying on a generic RS-232 transceiver layout.
How many RS-232 transmitters and receivers does MAX3381ECUP+ contain?
The MAX3381ECUP+ contains two RS-232 transmitters and two receivers. This 2/2 configuration allows two communications paths or separate transmit and receive channels within one device. The Analog Devices product listing identifies the MAX3381ECUP+ as a 2/2 full RS-232 transceiver, while the manufacturer family description confirms its role as an EIA/TIA-232 and V.28/V.24 interface.
What is the operating voltage of MAX3381ECUP+?
The MAX3381ECUP+ operates from +2.35 V to +5.5 V. This range permits use with low-voltage digital systems as well as conventional 5 V RS-232 interface circuits. The Analog Devices MAX3381E product information identifies the MAX3380E and MAX3381E as +2.35 V to +5.5 V-powered EIA/TIA-232 and V.28/V.24 communication interfaces.
What ESD protection does MAX3381ECUP+ provide?
The MAX3381ECUP+ provides 15 kV ESD protection on both the RS-232 I/O pins and the logic pins. This protection improves robustness in applications where an external cable can accumulate electrostatic charge before reaching the equipment connector. Analog Devices describes the MAX3380E and MAX3381E family as having enhanced electrostatic-discharge protection on both sides of the interface.
What can replace the MAX3381ECUP+?
The MAX3381EEUP+ is the closest documented drop-in candidate for the MAX3381ECUP+, with the same TSSOP-20 footprint and the same 2-transmitter, 2-receiver RS-232 configuration. Additional same-family candidates include the MAX3381EUP+, MAX3381CUP+, MAX3380EEUP+, and MAX3380EUP+, but each should be checked against the manufacturer pin description and required receiver-enable behavior before substitution.
Is MAX3381ECUP+ the same as MAX3381EEUP+?
The MAX3381EEUP+ is pin- and package-compatible with the MAX3381ECUP+ and is described as a complete replacement whose terminals, package, and principal functional characteristics are consistent. Both are 2/2 RS-232 transceivers in TSSOP-20 packages. Confirm operating-temperature and marking requirements against the specific Analog Devices ordering information before using the alternate suffix in a released production design.
When should I choose MAX3381ECUP+ over MAX3380EEUP+?
Choose the MAX3381ECUP+ when the design requires both receiver channels to be controllable and the application follows the MAX3381E family behavior. Choose the MAX3380EEUP+ only after confirming that its receiver-enable arrangement satisfies the system. The MAX3381ECUP+ provides two transmitters, two receivers, a +2.35 V to +5.5 V supply range, and 15 kV ESD protection in a 20-TSSOP package.
Is MAX3381ECUP+ suitable for industrial RS-232 equipment?
The MAX3381ECUP+ is suitable for industrial equipment when its electrical ratings meet the system requirements. Its +2.35 V to +5.5 V operating range and 15 kV ESD protection support robust interface design, while the 2/2 channel count reduces the number of interface ICs required. The Analog Devices MAX3381E family is specifically described as a low-power, high-data-rate RS-232 interface with enhanced ESD protection.
What is the best Analog Devices equivalent for MAX3381ECUP+?
The MAX3381EEUP+ is the best directly documented Analog Devices alternative because it retains the TSSOP-20 footprint, 2/2 transceiver configuration, and compatible terminal arrangement. The MAX3381EUP+ and MAX3381CUP+ are additional same-family options for consideration. Because family suffixes can affect temperature, marking, or shutdown behavior, verify the exact ordering information before approving a substitution.
Where can I buy MAX3381ECUP+ online?
Use the “Request a Quote” form on this page to ask about MAX3381ECUP+ availability, lot handling, and order quantities. The part is listed as a 20-TSSOP RS-232 transceiver by authorized distribution channels, but live inventory and lead time can change. Submit the exact MPN MAX3381ECUP+ so the supplier can confirm the correct package, suffix, and production requirements.
What is the price of MAX3381ECUP+?
The current commercial terms for MAX3381ECUP+ should be obtained through the “Request a Quote” form on this page. The form allows the exact MPN, quantity, and target date to be submitted for a current response. This approach avoids stale price information and confirms whether the required 20-TSSOP configuration and suffix are available for your production schedule.
What is the lead time for MAX3381ECUP+?
Request the current lead time for MAX3381ECUP+ through the “Request a Quote” form on this page. Lead time depends on supplier inventory, order quantity, date code, and delivery destination. Including your required quantity and target delivery date in the request allows the commercial team to confirm the most relevant production schedule for the exact 20-TSSOP device.
Is MAX3381ECUP+ in stock?
Check present MAX3381ECUP+ inventory status through the “Request a Quote” form on this page. Stock can vary by package suffix, production lot, and order quantity, so a generic product-page indication is not enough to reserve the exact device. State the required quantity and whether a date-code or traceability constraint applies in the request.

داده‌های مرجع مهندسی برای MAX3381ECUP+ — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the MAX3381ECUP+ for a compact dual-channel RS-232 interface operating from +2.35 V to +5.5 V, particularly when both cable-facing and logic pins benefit from the documented 15 kV ESD protection. Its 2/2 arrangement is useful when a product needs two transmitters, two receivers, or separate command and data paths. The MAX3381EEUP+ is the most straightforward documented substitute when its exact ordering and environmental requirements are acceptable. Consider MAX3381EUP+ or MAX3381CUP+ only after checking their ordering information against the required temperature range and shutdown behavior. The MAX3380EEUP+ and MAX3380EUP+ preserve the TSSOP-20 footprint but use a different receiver-enable arrangement, making them appropriate only when that functional difference is acceptable. For all alternatives, confirm the 20-pin terminal assignments, external capacitor values, maximum data rate, and ESD configuration against the manufacturer datasheet before releasing a production PCB.

مقایسه با جایگزین‌ها

پارامتر این محصول MAX3381EEUP+ MAX3381EUP+ MAX3381CUP+ MAX3380EEUP+ MAX3380EUP+
Package 20-TSSOP 20-TSSOP - same 20-TSSOP - same 20-TSSOP - same 20-TSSOP - same 20-TSSOP - same
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Transmitter Count 2 2 2 2 2 2
Receiver Count 2 2 2 2 2 2
Supply Voltage Range +2.35 V to +5.5 V +2.35 V to +5.5 V +2.35 V to +5.5 V +2.35 V to +5.5 V +2.35 V to +5.5 V +2.35 V to +5.5 V
Communication Standard EIA/TIA-232 and V.28/V.24 EIA/TIA-232 and V.28/V.24 EIA/TIA-232 and V.28/V.24 EIA/TIA-232 and V.28/V.24 EIA/TIA-232 and V.28/V.24 EIA/TIA-232 and V.28/V.24
Receiver-Enable Behavior MAX3381E family behavior MAX3381E family behavior MAX3381E family behavior MAX3381C family behavior MAX3380E receiver-enable arrangement MAX3380E receiver-enable arrangement

تفاوت‌های کلیدی

  • Two transmitters and two receivers in one interface device (در مقابلMAX3381EEUP+)
  • Documented direct substitute within the MAX3381E family (در مقابلMAX3381EEUP+)
  • Broader transceiver selection without changing the PCB footprint (در مقابلMAX3380EEUP+)
  • 15 kV ESD protection covers both interface and logic sides (در مقابلMAX3381CUP+)

یادداشت‌های طراحی

Use the Analog Devices MAX3381E datasheet pin table as the authoritative assignment for all 20 TSSOP terminals. Place charge-pump and interface capacitors close to their designated pins, keep TXOUT and RIN traces away from clocks, sensors, and ADC inputs, and avoid routing the RS-232 connector path beneath sensitive analog circuitry. Confirm whether the exposed board ground requires a particular copper treatment under the package.

Do not treat the MAX3381ECUP+ as an isolated RS-232 interface. The signal-ground relationship between the transceiver and connected equipment affects noise immunity and communication reliability, so the chassis or signal-ground strategy must be defined at the system level. Avoid shared-bus connections unless every attached device and software driver is designed for that topology; otherwise assign independent transmitter and receiver channels.

The dual-channel 2/2 architecture can help separate command and data traffic, but it can also create simultaneous switching paths on the board. Route each RS-232 pair with a continuous ground reference where the interface standard and cable construction permit it, use controlled connector transitions, and keep the external cable away from sensitive circuits inside the enclosure. Validate conducted and radiated emissions at the finished-product level.

Design the supply rail for the complete transceiver and connector load rather than assuming a nominal logic rail is sufficient. The MAX3381ECUP+ operates from +2.35 V to +5.5 V, but the selected voltage must also satisfy every family variant, temperature condition, and interface load. Place local bypass capacitance at the supply pins and verify startup behavior and supply droop with the actual cable and attached equipment connected.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The verified product information identifies EIA/TIA-232 and V.28/V.24 interface compliance but does not state the requested environmental or automotive declarations.

تاریخ تأیید داده‌ها: 2026-11-09 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

MAX3381ECUP+ datasheet MAX3381ECUP+ pinout MAX3381ECUP+ datasheet pdf MAX3381ECUP+ specifications MAX3381ECUP+ equivalent MAX3381ECUP+ replacement MAX3381ECUP+ price MAX3381ECUP+ stock Analog Devices MAX3381ECUP+ MAX3381ECUP+ TSSOP-20 MAX3381ECUP+ RS-232 interface MAX3381ECUP+ vs MAX3381EEUP+

قطعات و اصطلاحات مرتبط

Analog Devices Maxim Integrated MAX3381ECUP+ MAX3381EEUP+ MAX3381EUP+ MAX3381CUP+ MAX3380EEUP+ MAX3380EUP+ RS-232 transceiver communication interface IC EIA/TIA-232 V.28 V.24 20-TSSOP TSSOP package family surface-mount package ESD protection 15 kV ESD dual-transmitter interface dual-receiver interface charge-pump interface supply voltage industrial control data-acquisition equipment test and measurement
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ