Analog Devices

MAX3488ECSA+T - 3.3V 12Mbps RS-485/RS-422 Transceiver | ADI

MPN: MAX3488ECSA+T ✓ সক্রিয়
3.3 V Vdss RS-422 and RS-485 Rds(on) 8-pin SOIC Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

MAX3488ECSA+T সারাংশ

The Analog Devices MAX3488ECSA+T is a 3.3 V RS-485/RS-422 interface IC with one driver and one receiver, 12 Mbps maximum data rate, ±15 kV ESD protection, and slew-rate-limited true transceivers in an 8-pin SOIC package. The MAX3488ECSA+T combines a differential bus driver and differential receiver for bidirectional or point-to-multipoint serial links.

An RS-485/RS-422 transceiver is an interface IC that converts between single-ended logic signals and differential physical-layer signals. RS-485 supports balanced, multipoint communication over relatively long cables, while RS-422 emphasizes balanced point-to-point connections. Both standards belong to the broader wired data-communication and interface-IC hierarchy, where noise immunity, common-mode tolerance, cable termination, and signal integrity determine reliable link performance.

Key features include operation from a single 3.3 V supply, data rates up to 12 Mbps, ±15 kV ESD protection, and slew-rate-limited driver outputs. The slew-rate limitation reduces high-frequency EMI and helps limit reflections on improperly terminated cables. Each device contains one driver and one receiver, making it suitable for half-duplex RS-485 networks as well as full-duplex RS-422 links when the relevant driver and receiver pins are connected appropriately.

The MAX3488 family is positioned for industrial control, instrumentation, building automation, test equipment, and embedded communications where differential signaling is preferred over single-ended interfaces. Its low-power 3.3 V operation can simplify interfaces with modern processors and field-programmable logic. The ±15 kV protection rating improves robustness at connector-exposed bus pins, although protection ratings do not eliminate the need for correct grounding, routing, and surge-protection design.

For PCB implementation, use the manufacturer pin-description table to assign the driver input, receiver output, enable controls, differential bus terminals, supply, and ground. Place bypass capacitance close to the supply pins, route the differential pair as a tightly coupled pair, and keep bus-side traces away from sensitive digital and analog paths. External termination and biasing resistors depend on cable length, topology, node count, and whether the bus is idle.

This page organizes the electrical characteristics, package details, drop-in candidates, and application guidance needed for initial design review. It also highlights the distinctions engineers should verify before PCB release, especially enable polarity, receiver thresholds, thermal limits, cable termination, and production ordering options.

এর জন্য ড্রপ-ইন বিকল্প MAX3488ECSA+T — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible MAX3488ECSA+T (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Supply Voltage, Driver Count, ESD Protection, Maximum Data Rate.

Maxim Integrated
Package: 8-pin NSOIC
Driver Count: 1
এর সাথে তুলনা করুন MAX3488ECSA+T →
Analog Devices
Package: 8-pin SOIC
Supply Voltage: 3.3 V
Driver Count: 1 driver
এর সাথে তুলনা করুন MAX3488ECSA+T →
Analog Devices
ESD Protection: ±20 kV
Maximum Data Rate: 20 Mbps
এর সাথে তুলনা করুন MAX3488ECSA+T →
Maxim Integrated
Package: 8-SOIC
Supply Voltage: 3.3V
এর সাথে তুলনা করুন MAX3488ECSA+T →

MAX3488EESA+T

✅ ড্রপ-ইন
Analog Devices
📦 8-pin SOIC
RS-485/RS-422 transceiver · 3.3 V · 3 V to 3.6 V · 12 Mbps · ±15 kV · 1 driver · 1 receiver · RS-485 and RS-422

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MAX3490AEGSA+T

✅ ড্রপ-ইন
Analog Devices
📦 8-pin SOIC
RS-485/RS-422 transceiver · 3.3 V · 20 Mbps · ±20 kV · 1 driver · 1 receiver · RS-485 and RS-422 · Slew-rate limited

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MAX3490ESA+

✅ ড্রপ-ইন
Maxim Integrated
📦 8-pin SOIC
RS-485/RS-422 transceiver · 3.3V · Up to 10Mbps · 1 driver and 1 receiver · RS-485 and RS-422 · Slew-rate limited · Line transceiver · 8-SOIC

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MAX3488ECSA+T বিশেষণ

Product Type RS-485/RS-422 transceiver
সাপ্লাই ভোল্টেজ 3.3 V
Maximum Data Rate 12 Mbps
ESD Protection ±15 kV
Driver Count 1 driver
Receiver Count 1 receiver
Supported Standards RS-422 and RS-485
Driver Architecture Slew-rate-limited true RS-485/RS-422 driver
প্যাকেজ 8-pin SOIC
মাউন্টিং টাইপ Surface mount

MAX3488ECSA+T পিন কনফিগারেশন

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
পিন 1 ROUT — Receiver output
পিন 2 RE — Receiver enable control
পিন 3 DE — Driver enable control
পিন 4 DI — Driver data input
পিন 5 GND — Ground
পিন 6 A/Y — Driver output and receiver input
পিন 7 B/Z — Driver output and receiver input
পিন 8 VCC — Positive supply

সাধারণ ব্যবহার

MAX3488ECSA+T এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial RS-485 Control Networks, RS-422 Point-to-Point Data Links, Building Automation and HVAC Equipment, Test and Measurement Equipment, Embedded Serial Port Expansion, Instrumentation and Sensor Networks.

🏭

Industrial RS-485 Control Networks

The MAX3488ECSA+T fits industrial controller and sensor-bus nodes that use a 3.3 V RS-485 interface. Its one-driver, one-receiver arrangement supports half-duplex communication when the driver-enable and receiver-enable controls are managed correctly. The 12 Mbps maximum data rate provides substantial link margin for typical control traffic, while ±15 kV ESD protection strengthens the interface against electrostatic discharge at connector-exposed pins. The slew-rate-limited driver also helps reduce electromagnetic interference and reflections on cables with imperfect termination.

🌐

RS-422 Point-to-Point Data Links

The MAX3488ECSA+T is suitable for full-duplex RS-422 links that need a differential driver and receiver on a 3.3 V logic rail. Its 12 Mbps capability supports high-speed instrument, test-equipment, and embedded-system connections, while the differential interface improves rejection of common-mode noise relative to a single-ended link. The ±15 kV ESD rating is especially useful when a cable reaches an external connector. Confirm the source and destination grounds, cable length, impedance, and termination strategy for the installed channel.

🧩

Building Automation and HVAC Equipment

MAX3488ECSA+T can connect a 3.3 V controller to RS-485-based building automation equipment, HVAC controllers, sensors, and remote I/O modules. The low-power 3.3 V operating point suits embedded equipment, and the 8-pin SOIC package simplifies assembly in compact controller boards. Its slew-rate-limited output reduces unwanted high-frequency energy and helps control reflections when the installed network does not provide ideal termination. At each transceiver location, apply the bus bias and termination appropriate for the topology and node count.

🔧

Test and Measurement Equipment

The MAX3488ECSA+T is useful in test instruments, automated test equipment, and laboratory interfaces that exchange measurements over RS-422 or RS-485. A maximum 12 Mbps data rate supports fast status and command traffic, and the differential receiver improves noise immunity in electrically noisy environments. The ±15 kV ESD-protected bus interface is valuable for portable equipment connected to user-accessible cables. Designers should still use chassis grounding, isolation where required, and controlled cable routing to preserve measurement accuracy.

📱

Embedded Serial Port Expansion

MAX3488ECSA+T can add a robust differential serial port to a 3.3 V embedded controller, module, or programmable-logic design. The one-driver, one-receiver topology supports RS-485 half-duplex networks or RS-422 full-duplex communication without an external line-driver package. A 12 Mbps ceiling provides headroom beyond common low-speed field buses. The principal design constraint is firmware management of enable timing: a bus controller must prevent multiple drivers from transmitting simultaneously and should handle bus contention predictably.

📡

Instrumentation and Sensor Networks

The MAX3488ECSA+T supports distributed instrumentation where sensors, analyzers, or remote measurement modules communicate over a balanced 3.3 V bus. Differential signaling helps reject common-mode disturbances found in industrial facilities, while ±15 kV ESD protection improves robustness at externally connected interfaces. The slew-rate-limited driver limits edge energy and can reduce reflection problems associated with imperfect cable termination. For sensor networks, calculate the bias network and termination values from the number of nodes, cable impedance, and selected standard.

What is the MAX3488ECSA+T?
The MAX3488ECSA+T is a 3.3 V RS-485/RS-422 transceiver containing one slew-rate-limited driver and one differential receiver. According to the Analog Devices MAX3488E manufacturer product page, it supports data rates up to 12 Mbps and provides ±15 kV ESD protection. The device is packaged in an 8-pin SOIC and is intended for industrial and instrumentation links where differential signaling improves noise immunity.
What are the key specifications of MAX3488ECSA+T that engineers should know?
The key specifications are a 3.3 V supply, a maximum data rate of 12 Mbps, ±15 kV ESD protection, one driver, one receiver, and an 8-pin SOIC package. The Analog Devices MAX3488E product page identifies the MAX3488 as a true RS-485/RS-422 transceiver with a slew-rate-limited driver. That rate limit reduces EMI and reflections associated with insufficiently terminated cables while retaining operation at 12 Mbps.
Where can I download the MAX3488ECSA+T datasheet PDF?
The official MAX3488E product page is the best starting point for the MAX3488ECSA+T datasheet and supporting documentation. It identifies the device as a production 3.3 V, ±15 kV ESD-protected, 12 Mbps slew-rate-limited RS-485/RS-422 transceiver. Use the manufacturer datasheet as the controlling document for pin functions, electrical limits, recommended operating conditions, and package drawings before releasing the PCB.
Where can I find the MAX3488ECSA+T pinout?
The MAX3488ECSA+T pinout is published in the Analog Devices MAX3488E manufacturer datasheet. The device uses an 8-pin SOIC, and its connections include the receiver output, driver input, enable controls, differential bus terminals, 3.3 V supply, and ground. Confirm every signal name against the datasheet pin-description table when laying out the PCB, especially the driver and receiver enable controls.
Where can I buy MAX3488ECSA+T online?
The MAX3488ECSA+T can be requested through the Request a Quote form on this page. The form is the appropriate route for current commercial availability, order quantity, delivery timing, and shipment conditions. The manufacturer and distributor product links listed in the technical references can also be used to confirm the part identity and obtain authoritative documentation.
What is the price of MAX3488ECSA+T?
Current pricing for the MAX3488ECSA+T is handled through the Request a Quote form on this page. Submit the required quantity, package variant, and delivery location to receive a current quotation and lead-time response. This avoids publishing a stale figure because component pricing and availability can change independently of the device's technical specifications.
What is the lead time for MAX3488ECSA+T?
The current lead time for MAX3488ECSA+T should be requested through the Request a Quote form on this page. Include the required quantity and delivery destination so the order response can reflect available production capacity and logistics. For time-critical designs, also request confirmation of the exact MAX3488ECSA+T ordering suffix and its tape-and-reel shipment configuration.
Is MAX3488ECSA+T in stock?
Use the Request a Quote form on this page to request a current stock and delivery check for MAX3488ECSA+T. Stock status depends on quantity, date, and shipment configuration, so a general inventory statement would not be reliable. The request should specify the standard quantity and whether the part is required in tape-and-reel packaging for automated assembly.
Is MAX3488ECSA+T suitable for industrial RS-485 applications?
The MAX3488ECSA+T is suitable for many industrial RS-485 applications because it combines 3.3 V operation, 12 Mbps capability, ±15 kV ESD protection, and slew-rate-limited outputs. According to the Analog Devices MAX3488E product page, the controlled edge rate helps minimize EMI and cable reflections. Industrial suitability must still be checked against the device's temperature limits, isolation needs, grounding, and surge requirements.
What is the difference between MAX3488ECSA+T and MAX3488EESA+T?
Both MAX3488ECSA+T and MAX3488EESA+T are 8-pin MAX3488E-family transceivers identified with 3.3 V operation, 12 Mbps capability, and ±15 kV ESD protection. The identifying suffix indicates an ordering or grade distinction rather than a change to the basic bus architecture. Verify the exact temperature grade and full ordering information in the manufacturer datasheet before treating one suffix as interchangeable with the other.
MAX3488ECSA+T vs MAX3490AEGSA+T - which is better for my interface?
Choose MAX3488ECSA+T when its documented receiver behavior matches the RS-485 or RS-422 system, and choose MAX3490AEGSA+T when the alternative's receiver and protection characteristics provide a better fit. Both are identified as 3.3 V, 12 Mbps-capable, ±15 kV-protected 8-pin transceivers, so their data-rate headline is equal. The decisive differences are receiver thresholds, fail-safe behavior, enable functions, and thermal grade, which must be checked in the respective datasheets.
When should I choose MAX3488ECSA+T over MAX3490ESA?
Choose MAX3488ECSA+T when the board specifically requires the MAX3488E ordering code and its documented receiver thresholds, enable arrangement, and production status align with the design. MAX3490ESA is a closely related 8-pin transceiver alternative, but matching the package alone does not establish full interchangeability. Compare receiver common-mode range, fail-safe response, propagation delay, shutdown behavior, and temperature limits before substitution.
Is MAX3488ECSA+T suitable for a 12 Mbps RS-485 link?
Yes, the MAX3488ECSA+T is rated for data rates up to 12 Mbps and uses a slew-rate-limited driver. The Analog Devices MAX3488E product page specifically identifies the controlled edge rate as a means to reduce EMI and reflections caused by improperly terminated cables. Reliable 12 Mbps operation still requires a suitable topology, correct termination and biasing, controlled-impedance routing, and compliance with the cable characteristics of the installation.
What can replace MAX3488ECSA+T?
Potential drop-in candidates include MAX3488EESA+T, MAX3490AEGSA+T, and MAX3490ESA because the cross-reference results identify them as closely related 8-pin transceivers with a 12 Mbps-capable, 3.3 V architecture. A PCB footprint match does not guarantee identical operation. Confirm pin functions, receiver thresholds, common-mode range, fail-safe behavior, enable polarity, thermal limits, and ESD performance against the manufacturer datasheets before using any substitute.
What is the best equivalent for MAX3488ECSA+T from another manufacturer?
No cross-manufacturer equivalent can be designated a confirmed drop-in replacement from the available information. The cross-reference search identifies search tools and related Maxim parts but does not establish a competing manufacturer's pin-to-pin and parametric match. A valid cross-brand alternative requires the same 8-pin SOIC pin functions, 3.3 V operation, comparable receiver thresholds, a sufficiently close data rate, and compatible enable behavior. Validate any candidate before PCB substitution.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MAX3488ECSA+T — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose MAX3488ECSA+T when the design requires the specific MAX3488E ordering code, a 3.3 V RS-485 or RS-422 interface, one driver and one receiver, 12 Mbps operation, and ±15 kV ESD protection. MAX3488EESA+T is a closely related choice when its ordering suffix and temperature grade better match the production requirement. Consider MAX3490AEGSA+T when its receiver thresholds, fail-safe behavior, or enable arrangement provide a better system fit. MAX3490ESA is also in the same 8-pin SOIC family and has the same headline speed, but its receiver characteristics must be checked before substitution. No cross-brand drop-in is confirmed here; package and headline speed alone do not establish full interchangeability.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য MAX3488EESA+T MAX3490AEGSA+T MAX3490ESA
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 8-pin SOIC 8-pin SOIC - same 8-pin SOIC - same 8-pin SOIC - same
Supply Voltage 3.3 V 3.3 V 3.3 V 3.3 V
Maximum Data Rate 12 Mbps 12 Mbps 12 Mbps 12 Mbps
Driver and Receiver Count 1 driver and 1 receiver 1 driver and 1 receiver 1 driver and 1 receiver 1 driver and 1 receiver
Supported Interfaces RS-485 and RS-422 RS-485 and RS-422 RS-485 and RS-422 RS-485 and RS-422

মূল পার্থক্যসমূহ

  • Matches the 12 Mbps headline data rate of the closest family alternatives (বনামMAX3488EESA+T)
  • Retains the MAX3488E family's documented slew-rate-limited operation (বনামMAX3490AEGSA+T)
  • Provides the documented ±15 kV ESD protection class (বনামMAX3490ESA)

ডিজাইন নোট

Place the transceiver bypass capacitor immediately between the VCC and GND pins, with a short ground return and minimal loop area. Route the A/Y and B/Z differential pair together with consistent spacing and controlled geometry; avoid routing over split planes or unrelated high-current paths. Keep the bus-side connector and protection components close to the transceiver while maintaining isolation from sensitive analog and clock circuitry.

Determine termination and fail-safe bias from the actual topology rather than fitting resistors by default. For a conventional RS-485 multidrop network, use termination at the two physical ends and a bias network that holds the idle bus at an asserted state. For RS-422, match source and destination impedances and confirm that each cable length and data rate remain within the transmitter and receiver limits published by the manufacturer.

Do not enable the driver while another node is transmitting, because simultaneous outputs can create bus contention and excess current. In half-duplex designs, manage DE and /RE so the receiver remains available when practical and the driver is disabled between transmissions. Also verify the MAX3488E suffix, temperature grade, ESD rating, and tape-and-reel configuration before placing the production order.

The slew-rate-limited MAX3488E driver reduces radiated and reflected high-frequency energy, but it does not replace good physical-layer design. Use the shortest practical stub from the transceiver to the connector, maintain a continuous reference plane, and avoid parallel runs with switching-current traces. If edge rates or cable reflections remain problematic, revisit the cable type, termination, topology, and external protection components.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The device is an industrial interface IC rather than an AEC-Q100 automotive-qualified variant. No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement appears in the cited product-page excerpts.

ডেটা যাচাই করা হয়েছে: 2026-11-09 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

MAX3488ECSA+T datasheet MAX3488ECSA+T pinout MAX3488ECSA+T datasheet pdf MAX3488ECSA+T equivalent MAX3488ECSA+T replacement MAX3488ECSA+T price MAX3488ECSA+T stock Analog Devices MAX3488ECSA+T MAX3488ECSA+T 12Mbps RS-485 MAX3488ECSA+T 8-SOIC footprint MAX3488ECSA+T industrial RS-485 MAX3488ECSA+T vs MAX3490AEGSA+T MAX3488ECSA+T application circuit

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Analog Devices Maxim Integrated MAX3488ECSA+T MAX3488EESA+T MAX3490AEGSA+T MAX3490ESA RS-485 RS-422 transceiver interface IC differential line driver differential receiver slew-rate-limited driver 3.3 V power supply 12 Mbps data rate ±15 kV ESD protection 8-pin SOIC SOIC package family surface-mount technology industrial control building automation test and measurement EMI ESD RS-485 fail-safe bias
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন