Analog Devices

MAX396CPI+ - 16-Channel 100Ω Analog Multiplexer | Analog Devices

MPN: MAX396CPI+ ✓ সক্রিয়
+2.7V to +16V Vdss 100Ω maximum Rds(on) 28-pin PDIP Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

MAX396CPI+ সারাংশ

The Analog Devices MAX396CPI+ is a precision 16-channel analog multiplexer with a 100Ω maximum on-resistance, 16:1 configuration, and a 28-pin PDIP package. It operates from a single +2.7V to +16V supply or from dual ±2.7V to ±8V supplies, making it suitable for low-voltage precision signal-routing systems.

An analog multiplexer is an analog switch that connects one of several input signals to a shared output. A 16:1 device such as the MAX396CPI+ provides one common output and four binary address inputs for selecting among 16 channels. In the broader semiconductor hierarchy, it belongs to the analog switch and multiplexer family within interface integrated circuits. Its low-voltage CMOS implementation supports instrumentation, data acquisition, control, and test systems that route bipolar or single-ended signals.

The MAX396 family provides maximum on-resistance of 100Ω, with resistance matching between switches maintained within 6Ω. The on-resistance remains flat within 10Ω over the specified signal range. Charge injection is limited to 5pC maximum, helping minimize switching transients in measurement paths. According to the manufacturer data sheet, the devices also provide electrostatic-discharge protection greater than 2000V using Method 3015.7.

The device accepts either a single positive supply from +2.7V to +16V or dual supplies from ±2.7V to ±8V while retaining CMOS-compatible logic inputs. Switching timing is specified at 150ns, enabling the mux to serve both moderate-speed acquisition systems and precision measurement circuits. The MAX396 is offered in dual 8-channel configurations, while MAX396CPI+ is the 16-channel, 28-pin PDIP implementation.

Typical uses include multiplexed sensor acquisition, programmable instrumentation, industrial control interfaces, automated test equipment, and low-level signal routing. The 100Ω on-resistance is particularly suitable for high-impedance sensors and amplifier inputs where insertion resistance must remain controlled. The low-voltage supply options also simplify systems using modern low-voltage analog and mixed-signal systems.

PCB design should minimize trace resistance on muxed analog paths and keep switching-node capacitance low. Enable and address transitions should be sequenced so that unwanted channels do not connect during signal acquisition. The 28-pin PDIP footprint is also mechanically straightforward to prototype, although production designs must consider its through-hole package versus smaller surface-mount options.

This page combines the manufacturer's electrical characteristics, packaging information, application guidance, pin-compatible comparisons, and practical layout considerations to support component selection and board-level implementation. It also identifies the operating limits and functional distinctions that matter when choosing between related MAX396 and MAX397 family members.

এর জন্য ড্রপ-ইন বিকল্প MAX396CPI+ — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

MAX396CPI

✅ ড্রপ-ইন
📦 PDIP-28
Uses the same 28-pin PDIP footprint and has identical listed 16:1 configuration and 100Ω maximum on-resistance; verify the exact suffix requirements before substitution.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MAX396CPI+ বিশেষণ

Number of Channels 16 channels
Multiplexer Configuration 16:1
On-Resistance 100Ω maximum
On-Resistance Matching Within 6Ω between switches
On-Resistance Variation 10Ω maximum over the specified signal range
Charge Injection 5pC maximum
Single-Supply Voltage Range +2.7V to +16V
Dual-Supply Voltage Range ±2.7V to ±8V
Switching Time 150ns
Electrostatic-Discharge Protection Greater than 2000V using Method 3015.7
Logic Compatibility CMOS-compatible
Process Technology Low-voltage silicon-gate CMOS
অপারেটিং তাপমাত্রার পরিসর 0°C to +70°C
প্যাকেজ 28-pin PDIP
মাউন্টিং টাইপ Through-hole
RoHS স্ট্যাটাস Compliant
Production Status Production

MAX396CPI+ 28-pin pdip পিন কনফিগারেশন গাইড

MAX396CPI+ (28-pin pdip প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

MAX396CPI+-এর জন্য 28-pin pdip প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MAX396CPI+.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

MAX396CPI+ এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Multiplexed Sensor Acquisition, Programmable Instrumentation, Automated Test Equipment, Industrial Control Signal Routing, Precision Data-Acquisition Systems, Battery-Powered Measurement Devices.

🏭

Multiplexed Sensor Acquisition

The MAX396CPI+ can connect one of 16 sensors to a shared amplifier or converter input while preserving closely matched channel resistance. Its 100Ω maximum on-resistance is manageable for many high-impedance sensors, and on-resistance matching within 6Ω helps reduce channel-dependent gain variation. With charge injection limited to 5pC maximum, the device supports low-error acquisition systems. The main design consideration is amplifier settling after each address change, particularly when the sensor source impedance and multiplexer capacitance produce a long RC time constant.

🔧

Programmable Instrumentation

The MAX396CPI+ is useful in front ends that select among multiple voltage sources, reference inputs, or measurement nodes under digital control. Four address inputs can identify the required one of 16 channels, while the stated 150ns switching time supports prompt routing changes. The low-voltage operation allows the multiplexer to work from +2.7V to +16V or ±2.7V to ±8V. For precision instruments, account for the 5pC maximum charge injection and allow the analog node to settle before sampling.

🖥️

Automated Test Equipment

The MAX396CPI+ can reduce the number of external connections in a test system by routing 16 inputs to one measurement channel. Its 100Ω maximum on-resistance and 6Ω maximum matching between switches help maintain consistency when different test points are selected. The 28-pin PDIP package also simplifies prototype-board assembly and socket-based maintenance. Production ATE designs should check the device's switching timing, leakage limits, and specified signal-range conditions against the fastest expected test sequence.

🏭

Industrial Control Signal Routing

The MAX396CPI+ can route multiple low-level control or feedback signals into a common controller input while keeping the switching network small and deterministic. Operation from +2.7V to +16V is suitable for compact industrial control electronics, and the dual-supply option supports bipolar signals. Because the device provides 100Ω maximum on-resistance, input impedance and injected noise must be considered. Use short analog traces and a suitable input buffer when driving high source impedances.

📡

Precision Data-Acquisition Systems

The MAX396CPI+ supports multiplexed data acquisition by connecting one of 16 analog inputs to a shared converter or amplifier. Its on-resistance variation of 10Ω maximum over the specified signal range helps preserve channel consistency, while 5pC maximum charge injection limits transient error during address transitions. The architecture is well suited to low-voltage precision systems using a +2.7V to +16V supply. Choose acquisition settling time and acquisition timing to accommodate the stated 150ns switching characteristic.

📱

Battery-Powered Measurement Devices

The MAX396CPI+ is suitable for portable measurement equipment because it can operate from a single supply as low as +2.7V. A 16:1 arrangement lets a compact analog front end share one amplifier or converter across multiple sensors without using 16 separate input stages. The 100Ω maximum on-resistance adds little burden to a high-impedance input, although it becomes more significant with lower source impedances. Low-voltage operation and the absence of a switching converter in the signal path also help control system noise.

What is the MAX396CPI+ used for?
The MAX396CPI+ is a precision 16-channel CMOS analog multiplexer used to route one of 16 input signals to a common output. According to the Analog Devices manufacturer data sheet, it supports a 16:1 configuration, 100Ω maximum on-resistance, and operation from +2.7V to +16V or ±2.7V to ±8V. It is suited to sensor acquisition, programmable instrumentation, automated test equipment, and industrial control interfaces.
What are the key specifications of MAX396CPI+ that engineers should know?
The MAX396CPI+ combines a 16:1 configuration, 100Ω maximum on-resistance, and 150ns switching time in a 28-pin PDIP package. The Analog Devices manufacturer data sheet also specifies on-resistance matching within 6Ω between switches, variation of 10Ω maximum across the signal range, charge injection of 5pC maximum, and ESD protection greater than 2000V using Method 3015.7. These characteristics make the device useful for low-level precision signal-routing systems.
Is MAX396CPI+ the same as MAX396CPI?
The MAX396CPI+ and MAX396CPI identify closely related 28-pin PDIP versions of the MAX396 precision analog multiplexer. The manufacturer lists the MAX396 family as a production device, while product-listing information identifies both as 16:1, 100Ω multiplexers. The suffix distinction can affect ordering or qualification details, so engineers should confirm the exact suffix against their bill of materials and manufacturer ordering information before releasing production hardware.
Can MAX396CPI+ replace MAX396CPI?
The MAX396CPI+ can be used as a drop-in candidate for MAX396CPI because both are listed as 28-pin PDIP, 16:1 analog multiplexers with the same 100Ω maximum on-resistance. Their close package and parameter alignment supports direct substitution on existing layouts. Before replacement, verify the exact supply configuration, temperature grade, lifecycle state, and ordering suffix required by the original design.
What is the best drop-in replacement for MAX396CPI+?
MAX396CPI is the closest documented drop-in candidate for MAX396CPI+ because it uses the same 28-pin PDIP footprint and is identified as a 16:1, 100Ω analog multiplexer. No broader set of verified pin-to-pin alternatives was established. Engineers should use the MAX396 family documentation to confirm address, enable, common, supply, and no-connect assignments before accepting a substitution.
What can replace MAX396CPI+?
MAX396CPI is the documented same-package replacement candidate for MAX396CPI+, with both identified as 28-pin PDIP, 16:1 multiplexers rated for 100Ω maximum on-resistance. The MAX397 family provides related dual 8-channel functionality, but it is not treated as a drop-in alternative without a verified pin map. Use the manufacturer pin-description table and confirm the complete signal and supply assignments before substituting any part.
Where can I download the MAX396CPI+ datasheet PDF?
The official MAX396 family datasheet is linked from the Analog Devices product page at https://www.analog.com/en/products/max396.html. The page identifies the device as a production precision 16-channel or dual 8-channel low-voltage CMOS analog multiplexer and provides the manufacturer data sheet for ordering-code, electrical-characteristic, and pin-assignment review. Use the MAX396 family document for the MAX396CPI+ ordering variant.
Where can I find the MAX396CPI+ pinout?
The MAX396CPI+ pin assignment is defined in the MAX396 family data sheet linked from the official Analog Devices product page. Because the exact numbered signal table is not reproduced in the product-page material, use the manufacturer's pin-description table when assigning address inputs, enable controls, common terminals, supply pins, and analog channels. Do not infer missing pin numbers from package position alone.
What supply voltage does MAX396CPI+ require?
The MAX396CPI+ operates from either a single +2.7V to +16V supply or dual supplies ranging from ±2.7V to ±8V. The Analog Devices manufacturer data sheet states that both configurations retain CMOS-compatible logic inputs and low-voltage operation. Confirm the selected supply arrangement against the data sheet's absolute maximum ratings and pin configuration before applying power.
How fast does MAX396CPI+ switch?
The MAX396CPI+ has a stated switching time of 150ns in the product specifications. According to the Analog Devices manufacturer data sheet, the MAX396/MAX397 family uses a low-voltage silicon-gate CMOS process and combines low charge injection with fast switching. The 150ns figure should be treated as a maximum device characteristic under the manufacturer's specified test conditions rather than as a guaranteed delay for every board layout.
Does MAX396CPI+ need a heatsink?
The MAX396CPI+ generally does not require a heatsink because it is a CMOS analog multiplexer rather than a high-power regulator or power transistor. Thermal design should nevertheless account for supply dissipation and nearby heat sources. Maintain the manufacturer-recommended PCB layout and airflow conditions, and use the maximum power dissipation and junction-temperature limits from the MAX396 family data sheet for worst-case analysis.
Is MAX396CPI+ suitable for precision sensor acquisition?
The MAX396CPI+ is suitable for precision sensor acquisition when the source impedance and signal bandwidth are compatible with its 100Ω maximum on-resistance. The Analog Devices manufacturer data sheet specifies on-resistance matching within 6Ω between switches and variation of only 10Ω maximum across the signal range, reducing channel-dependent gain errors. Charge injection of 5pC maximum also supports low-error measurement, although settling time and multiplexer capacitance must still be considered.
Where to buy MAX396CPI+ online?
The MAX396CPI+ can be requested through the Request a Quote form on this page. The form is the appropriate route for checking exact-MPN availability, lead time, order quantity, and packaging requirements. Provide the complete MAX396CPI+ ordering code and the intended quantity so the sourcing team can identify the correct production component rather than a related MAX396 or MAX397 variant.
What is the price of MAX396CPI+?
Use the Request a Quote form on this page for the current MAX396CPI+ unit price and quantity structure. The component is available from multiple channels, but price and stock can change with package, order quantity, and market conditions. Submit the exact MPN, required quantity, and any date-code or traceability requirements to obtain a current quotation for the part being sourced.
What is the lead time for MAX396CPI+?
The current lead time for MAX396CPI+ should be confirmed through the Request a Quote form on this page. The Analog Devices product page identifies the MAX396 family as production, but production status alone does not establish available stock or a shipment interval for a particular quantity. Include your required order quantity and delivery schedule in the request for an allocation response.
Is MAX396CPI+ RoHS compliant and available for production?
The MAX396CPI+ is identified as RoHS compliant in the component specification, and Analog Devices lists the MAX396 family as production. The MAX396 data sheet also describes low-voltage CMOS construction and ESD protection greater than 2000V using Method 3015.7. Other compliance documents, including REACH, halogen-free status, and automotive qualification, should be confirmed for the exact ordering variant before deployment.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MAX396CPI+ — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose MAX396CPI+ when the design requires a 16:1 analog multiplexer in a 28-pin PDIP footprint, operates from +2.7V to +16V or dual ±2.7V to ±8V supplies, and needs low channel-to-channel resistance variation. It is particularly appropriate for high-impedance sensor inputs, programmable instrumentation, and test systems where a 100Ω maximum on-resistance is acceptable. MAX396CPI is the closest documented drop-in candidate because it shares the package, channel count, configuration, and listed major electrical characteristics; verify its exact suffix and qualification requirements before substitution. Consider a MAX397-family member when dual 8-channel functionality is required, but do not treat it as pin-compatible without confirming the manufacturer pin map. For new compact surface-mount designs, check whether a newer multiplex family offers a smaller footprint and improved leakage rather than assuming this PDIP implementation is the best platform choice.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য MAX396CPI
Package 28-pin PDIP 28-pin PDIP
Brand Analog Devices Analog Devices
Number of Channels 16 channels 16 channels
Multiplexer Configuration 16:1 16:1
Maximum On-Resistance 100Ω 100Ω
Single-Supply Voltage Range +2.7V to +16V +2.7V to +16V
Dual-Supply Voltage Range ±2.7V to ±8V ±2.7V to ±8V
Switching Time 150ns 150ns
Charge Injection 5pC maximum 5pC maximum

মূল পার্থক্যসমূহ

  • Closely matched 16-channel analog routing (বনামMAX396CPI)
  • Low channel-resistance variation (বনামMAX396CPI)
  • Flexible single- or dual-supply operation (বনামMAX396CPI)

ডিজাইন নোট

Route the common analog output and all 16 channel inputs as short, direct analog traces, and place any input or output filtering capacitors close to the receiving amplifier. The MAX396CPI+ has 100Ω maximum on-resistance, so excessive trace resistance can materially increase the total source impedance. Keep digital address and enable routing away from sensitive analog nodes to reduce capacitive switching coupling.

Allow the analog node to settle after changing the address or enable state. Although the switching time is listed as 150ns, acquisition accuracy also depends on the source impedance, multiplexer capacitance, downstream amplifier bandwidth, and sample-and-hold timing. Account for the 5pC maximum charge injection by measuring acquisition time and error after address transitions rather than sampling immediately after switching.

Do not assume every MAX396 or MAX397 ordering suffix is interchangeable. The MAX396 family supports 16-channel and dual 8-channel configurations, and variants use different package or temperature-ordering codes. Verify the manufacturer pin-description table, supply arrangement, temperature range, and exact MPN before substitution. MAX396CPI is the documented same-package candidate for MAX396CPI+.

কমপ্লায়েন্স তথ্য

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

RoHS compliance is identified for MAX396CPI. The MAX396 family is listed as production by Analog Devices. Other compliance attributes are not stated and remain unknown.

ডেটা যাচাই করা হয়েছে: 2026-11-14 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

MAX396CPI+ datasheet MAX396CPI+ pinout MAX396CPI+ datasheet pdf MAX396CPI+ equivalent MAX396CPI+ replacement MAX396CPI+ vs MAX396CPI MAX396CPI+ 16 channel multiplexer MAX396CPI+ PDIP-28 MAX396CPI+ price MAX396CPI+ stock Analog Devices MAX396CPI+ MAX396 16:1 analog mux

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Analog Devices Maxim Integrated MAX396CPI+ MAX396CPI MAX396 MAX397 analog multiplexer analog switch multiplexer interface IC precision CMOS analog switch 16:1 multiplexer single-supply operation dual-supply operation on-resistance charge injection switching time electrostatic-discharge protection PDIP-28 through-hole package sensor acquisition programmable instrumentation automated test equipment industrial control data acquisition RoHS
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন