onsemi

MC14016BD - 4-Channel 400Ω Analog Switch | onsemi | Signal Control

MPN: MC14016BD ✓ সক্রিয়
3 V to 18 V Vdss 400 Ω Rds(on) 14-pin SOIC Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

MC14016BD সারাংশ

onsemi MC14016BD is a four-circuit CMOS analog switch and quad multiplexer with an on-state resistance of 400 Ω, 1:1 signal routing, and a 14-pin SOIC package. The device operates from 3 V to 18 V and contains four independent bilateral switches that can control either digital or analog signals. Each switch supports signal gating, multiplexing, chopping, modulation, demodulation, and CMOS logic implementations.

A CMOS analog switch is a voltage-controlled semiconductor device that connects or isolates signal paths with low on-state resistance and high off-state impedance. The MC14016B family belongs to the analog switch and multiplexer hierarchy within interface ICs. Four physically independent switches permit one control signal to route each of four signal channels, while the bidirectional construction allows signal flow in either direction when the corresponding switch is enabled.

The monolithic MC14016BD combines P-channel and N-channel MOS enhancement-mode devices. Its principal advantages include a 1:1 multiplexing configuration, four independent switch sections, operation across a 3 V to 18 V supply range, and a compact 14-pin SOIC package. Because the switches can handle analog as well as digital signals, the device is useful when a system must route sampled, sensed, or conditioned signals without permanently connecting every channel to the same bus.

Signal integrity depends on control timing, output loading, switch charge injection, and the impedance of the connected source. The 400 Ω on resistance is appropriate for moderate-impedance switching rather than low-loss RF distribution. Control inputs should be driven only when signal levels remain within the device's valid input and output ranges, and unused control and signal pins should be connected according to the manufacturer's recommended application information.

Typical uses include analog signal gating, frequency choppers, modulators and demodulators, multiplexed measurement paths, and CMOS logic interfaces. The part is especially relevant to industrial control, instrumentation, sensor multiplexing, and communication circuitry where several low-frequency or moderate-frequency signals must be selected by logic control.

For PCB design, place the device close to the signals it routes and keep return paths continuous to reduce coupling between adjacent channels. Decoupling capacitors should be placed at the power pins according to the manufacturer datasheet, and control traces should be routed away from sensitive analog inputs. This page combines the manufacturer specifications with application guidance, package details, sourcing information, and drop-in replacement considerations for faster engineering review.

এর জন্য ড্রপ-ইন বিকল্প MC14016BD — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

MC14066B

✅ ড্রপ-ইন
📦 14-pin SOIC
The manufacturer recommends MC14066B when lower on-state resistance is required; MC14016BD is specified at 400 Ω.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

CD4016B

✅ ড্রপ-ইন
📦 14-pin SOIC
The MC14016B datasheet identifies CD4016B as a pin-for-pin replacement, while noting different parasitic coupling capacitance.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

CD4066B

✅ ড্রপ-ইন
📦 14-pin SOIC
The MC14016B datasheet identifies CD4066B as a pin-for-pin replacement, but transfer characteristics and parasitic coupling differ.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

HC4016

✅ ড্রপ-ইন
📦 14-pin SOIC
The manufacturer cites HC4016 as a high-speed CMOS option; switching speed differs while the four-section control topology remains compatible.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MC14016BFELG

✅ ড্রপ-ইন
📦 14-pin SOIC
Same MC14016B functional family and 14-pin SOIC footprint; suffix-specific temperature and ordering characteristics require confirmation.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MC14016BD সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Product Type Quad analog switch / quad multiplexer
Number of Switch Circuits 4 circuits
Multiplexer Configuration 1:1
On-State Resistance 400 Ω
Supply Voltage Range 3 V to 18 V
Switch Type Bilateral CMOS analog switch
Switch Architecture P-channel and N-channel MOS enhancement-mode devices
Signal Routing 1:1
পিনের সংখ্যা 14 pins
প্যাকেজ 14-pin SOIC
মাউন্টিং টাইপ Surface mount
Signal Type Analog or digital
Input ESD Protection Not provided on inputs and outputs

MC14016BD পিন কনফিগারেশন

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
পিন 1 OUT A — Common terminal for switch A
পিন 2 IN A — Normally closed terminal for switch A
পিন 3 IN B — Normally closed terminal for switch B
পিন 4 OUT B — Common terminal for switch B
পিন 5 OUT C — Common terminal for switch C
পিন 6 IN C — Normally closed terminal for switch C
পিন 7 IN D — Normally closed terminal for switch D
পিন 8 OUT D — Common terminal for switch D
পিন 9 CONTROL D — Control input for switch D
পিন 10 CONTROL C — Control input for switch C
পিন 11 CONTROL B — Control input for switch B
পিন 12 CONTROL A — Control input for switch A
পিন 13 VSS — Negative supply terminal
পিন 14 VDD — Positive supply terminal

সাধারণ ব্যবহার

MC14016BD এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Analog Sensor Channel Multiplexing, Signal Gating and Instrumentation, Chopper and Modulator Circuits, Industrial Control Signal Routing, CMOS Logic Interface and Signal Isolation, Test and Measurement Signal Selection.

🧩

Analog Sensor Channel Multiplexing

The MC14016BD suits multiplexed sensor acquisition because its four independent bilateral switches can select analog or digital signals while the stated on-state resistance is 400 Ω. Place the device close to the sensor interface and account for that resistance when sizing buffers and converters. The 1:1 architecture supports four channels without sharing a switching node, while the 3 V to 18 V supply range permits operation from low-voltage sensor systems through conventional CMOS control rails.

🔧

Signal Gating and Instrumentation

MC14016BD can gate up to four moderate-impedance signals in front of an instrumentation amplifier, measurement amplifier, or data-conversion input. Its bilateral construction supports controlled signal paths for calibration, range selection, or isolation of inactive inputs. Because the on-state resistance is 400 Ω, design the source impedance so the switch does not dominate measurement accuracy, and evaluate control transients for sensitive high-impedance nodes.

🌐

Chopper and Modulator Circuits

The four independently controlled switches in MC14016BD can form the switching elements of chopper, modulator, and demodulator arrangements. Each section can conduct signals in either direction, allowing the same package to support alternate current paths or phase-sensitive switching. The 400 Ω path resistance must be included in insertion-loss and impedance calculations, and clock-like control transitions should be timed so they do not overlap intended signal intervals.

🏭

Industrial Control Signal Routing

MC14016BD is applicable in industrial control systems that route low-frequency analog command or feedback signals between logic-controlled stages. Its 3 V to 18 V operating range supports multiple CMOS supply arrangements, and the 14-pin SOIC package simplifies assembly on conventional control boards. Ensure that switched signals remain within the valid common-mode range, provide defined levels to unused control inputs, and isolate long external wiring from sensitive analog routing.

🖥️

CMOS Logic Interface and Signal Isolation

The MC14016BD can implement logic-controlled isolation paths for both digital and analog signals using its four bilateral switch sections. When disabled, each section provides high off-state isolation; when enabled, it provides a nominal 400 Ω connection. Design the receiving gate and driver so their input currents, voltage thresholds, and leakage remain compatible with the switch characteristics, and avoid interpreting the off condition as an infinite impedance.

📺

Test and Measurement Signal Selection

MC14016BD can select test, reference, or calibration signals in a compact measurement front end. The four-section arrangement allows several inputs to share one downstream converter or amplifier while independent controls establish the selected route. The 400 Ω on resistance may require an input buffer for high-accuracy measurements, and charge injection should be evaluated when low-level signals are switched. Place the device near the acquisition circuitry to minimize additional parasitic capacitance.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

MC14066B Lower-resistance family alternative for impedance-sensitive sensor paths ব্যবহৃত হয়: Analog Sensor Channel Multiplexing, Signal Gating and Instrumentation, Industrial Control Signal Routing, Test and Measurement Signal Selection CD4016B Documented pin-for-pin switching alternative ব্যবহৃত হয়: Analog Sensor Channel Multiplexing, Chopper and Modulator Circuits, CMOS Logic Interface and Signal Isolation CD4066B Pin-compatible alternative for signal-routing designs ব্যবহৃত হয়: Signal Gating and Instrumentation, CMOS Logic Interface and Signal Isolation HC4016 High-speed CMOS alternative when faster control transitions are important ব্যবহৃত হয়: Chopper and Modulator Circuits, Test and Measurement Signal Selection MC14016BFELG Related onsemi ordering option for the same functional family ব্যবহৃত হয়: Industrial Control Signal Routing
What is the MC14016BD?
The MC14016BD is an onsemi four-channel CMOS analog switch and quad multiplexer with 400 Ω on-state resistance and 1:1 routing in a 14-pin SOIC package. According to the MC14016B manufacturer datasheet, its four independent bilateral switches can control analog or digital signals and support gating, chopping, modulation, demodulation, and CMOS logic functions.
What is the operating voltage of MC14016BD?
The MC14016BD operates from 3 V to 18 V. This supply range is shown in the onsemi product listing and supports both lower-voltage CMOS systems and conventional higher-voltage designs. The complete operating limits should be checked in the manufacturer datasheet before fixing the supply rail, especially when the device must handle signals close to the positive supply.
Where can I download the MC14016BD datasheet PDF?
The MC14016BD datasheet PDF is available from the official onsemi document at https://www.onsemi.com/pdf/datasheet/mc14016b-d.pdf. The document describes the quad bilateral switch, electrical characteristics, application information, and pin configuration for the MC14016B family. Use the MC14016BD ordering information to confirm package, temperature grade, and lifecycle details before production release.
Where can I find the MC14016BD pinout?
The MC14016BD pinout is defined in the manufacturer MC14016B datasheet, with 14 pins in the SOIC package. The functional connections include four switch signal pairs, four control inputs, VDD, and VSS. Use the pin-description table in that document when assigning PCB nets because control polarity and package drawing details must be checked against the selected ordering code.
How many independent switches does the MC14016BD contain?
The MC14016BD contains four independent switches, as stated in the manufacturer datasheet and the onsemi product listing. Each section is a bilateral switch capable of carrying an analog or digital signal, and the device is arranged as a 1:1 quad multiplexer. The independent control inputs allow a system to gate or select several signal paths without sharing one internal switching element.
What is the on-state resistance of the MC14016BD?
The MC14016BD has a specified on-state resistance of 400 Ω. This figure makes it suitable for moderate-impedance analog gating, multiplexing, and signal-routing tasks. Because 400 Ω is relatively high for precision low-impedance instrumentation, designers should include the switch resistance in the complete signal-path calculation and avoid assuming the switched path has negligible loss.
What is the best drop-in replacement for MC14016BD?
The CD4016B is identified in the MC14016B datasheet as a pin-for-pin replacement for the MC14016B family, subject to reviewing the published electrical differences. The manufacturer notes that improved transfer-characteristic design can increase parasitic coupling capacitance relative to the CD4016. Confirm the exact 14-pin SOIC ordering code, control levels, timing, and signal limits before substitution.
Can CD4016B replace MC14016BD in a 14-pin SOIC design?
Yes, the CD4016B can be considered a pin-for-pin replacement when the ordering code uses the compatible 14-pin SOIC footprint. The onsemi MC14016B datasheet explicitly lists the CD4016B for pin-for-pin replacement, while noting different parasitic coupling capacitance. Verify supply range, control-input thresholds, on-resistance, switching time, and signal-handling limits for the complete system.
Can CD4066B replace MC14016BD?
The CD4066B is listed by onsemi as a pin-for-pin replacement for the MC14016B family, but its internal switch characteristics are not identical. The MC14016B datasheet recommends the MC14066B when lower on resistance is needed and notes that the improved transfer characteristic design produces more parasitic coupling capacitance. Confirm whether that behavior is acceptable for the selected switching frequency and source impedance.
When should I choose MC14016BD over MC14066B?
Choose the MC14016BD when a four-section 1:1 bilateral switch with a stated 400 Ω on-state resistance is sufficient and the design benefits from the MC14016B transfer characteristics. Consider the MC14066B when lower on resistance is important. Both devices belong to the same onsemi CMOS switching family, but the manufacturer specifically identifies the MC14066B as the lower-resistance option.
Is MC14016BD suitable for sensor multiplexing?
Yes, MC14016BD is suitable for multiplexing moderate-impedance sensor signals when their voltage levels remain within the device's valid operating limits. Its four independent bilateral switches and 400 Ω on resistance support practical selection of analog channels. For high-impedance sensors, account for leakage, charge injection, control transients, and the complete source-impedance and capacitance network.
What can replace MC14016BD?
The principal documented replacements are the CD4016B and CD4066B, both identified as pin-for-pin options for the MC14016B family. The onsemi MC14066B is another family member for designs that require lower on resistance. A valid replacement must use the 14-pin SOIC footprint and must be checked for control levels, on resistance, switching speed, parasitic coupling, and signal-range differences.
Is the MC14016BD the same as the MC14016BFELG?
The MC14016BD and MC14016BFELG are related onsemi ordering codes for the MC14016B quad analog switch family, but suffix-specific package and qualification details must be confirmed before interchange. Do not assume that the last character changes only shipping format. Compare the complete ordering table, package dimensions, temperature grade, and lifecycle status for the exact part number being qualified.
Where can I buy MC14016BD and check its lead time?
Use the Request a Quote form on this page to request current MC14016BD availability, quantity breaks, and lead time for the exact 14-pin SOIC ordering code. The part is currently listed by major distributors, but current stock, minimum order quantity, and delivery timing can change. Provide the target quantity, shipment destination, and required date when requesting a quotation.
What are the key specifications of MC14016BD that engineers should know?
The key MC14016BD specifications are four independent bilateral switches, a 1:1 multiplexing arrangement, 400 Ω on-state resistance, a 3 V to 18 V supply range, and a 14-pin SOIC package. The manufacturer describes the internal implementation as P-channel and N-channel MOS enhancement-mode devices. Signal range, leakage, switching time, charge injection, and temperature limits should be taken from the MC14016B datasheet.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MC14016BD — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose MC14016BD when the design needs four independent bilateral analog switches in a 14-pin SOIC package, the nominal 400 Ω on resistance is acceptable, and the 3 V to 18 V supply range matches the system. It is appropriate for general analog gating, multiplexing, chopping, modulation, demodulation, and CMOS logic-interface implementations. Select MC14066B when lower on-state resistance is important because onsemi specifically recommends that family member for lower-resistance requirements. Consider CD4016B or CD4066B when procuring an alternate source, but review the documented pin-for-pin relationship and the note that parasitic coupling capacitance differs. Use HC4016 when faster switching behavior is more important than the MC14016BD characteristics. MC14016BFELG may suit a related onsemi ordering requirement, but its suffix-specific temperature and package conditions should be checked before reuse. For any substitution, verify the control-input levels, signal range, leakage, switching time, charge injection, and operating-temperature limits in the exact replacement datasheet.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য MC14066B CD4016B CD4066B HC4016 MC14016BFELG
Package 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC
Brand onsemi onsemi Texas Instruments Texas Instruments Texas Instruments onsemi
Function Quad bilateral switch / quad multiplexer Quad bilateral switch / quad multiplexer Quad bilateral switch Quad bilateral switch High-speed CMOS quad bilateral switch Quad bilateral switch / quad multiplexer
Number of Switch Circuits 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits
Signal Type Analog or digital Analog or digital Analog or digital Analog or digital Analog or digital Analog or digital
Replacement Qualification Primary device Same-family option when lower on resistance is required Manufacturer-documented pin-for-pin replacement Manufacturer-documented pin-for-pin replacement High-speed CMOS option Related ordering option

মূল পার্থক্যসমূহ

  • Four independently controlled bilateral sections (বনামMC14066B)
  • Documented cross-family replacement path (বনামCD4016B)
  • Straightforward 3 V to 18 V CMOS operation (বনামHC4016)

ডিজাইন নোট

Treat the 400 Ω on-state resistance as part of the signal path rather than as a negligible interconnect. Estimated example: a source impedance of 1 kΩ combined with 400 Ω of switch resistance creates approximately 400 Ω of total series resistance and can attenuate the signal by about 29% relative to an unloaded source. Use the actual source impedance and load in the system calculation, and add a buffer when accuracy, drive current, or impedance matching requires it.

Place the MC14016BD close to the multiplexer or acquisition node and route each switched signal with a continuous ground reference. Keep control traces away from sensitive analog nets, particularly because the manufacturer notes that improved transfer-characteristic designs can have increased parasitic coupling capacitance. Decouple VDD and VSS according to the manufacturer application guidance, and avoid long parallel routes between active and inactive switch sections.

Do not apply a signal or control voltage outside the absolute maximum and recommended operating limits. The manufacturer warns that the inputs and outputs do not include ESD protection, so use external protection and handling procedures when long cables, exposed connectors, or human-accessible circuits are involved. Also define every unused control input at a valid logic level instead of allowing it to float.

Route the four bilateral switch paths so that disabled channels cannot unintentionally couple energy into the selected channel. Maintain consistent ground connections, minimize stub lengths, and place high-impedance nodes away from control and switching edges. If switching low-level signals, evaluate charge injection and control-edge settling before defining the acquisition timing window.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The onsemi MC14016B datasheet states that the device inputs and outputs do not have ESD protection. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not identified for this ordering code.

ডেটা যাচাই করা হয়েছে: 2026-11-11 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

mc14016 datasheet MC14016BD datasheet PDF MC14016BD datasheet MC14016BD pinout MC14016BD 14-SOIC MC14016BD equivalent MC14016BD replacement MC14016BD cross reference MC14016BD vs CD4016B MC14016BD vs MC14066B onsemi MC14016BD MC14016BD 3-18V switch MC14016BD price MC14016BD stock

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

onsemi MC14016BD MC14016B MC14066B MC14016BFELG CD4016B CD4066B HC4016 quad analog switch quad multiplexer bilateral switch CMOS analog switch interface IC P-channel MOS N-channel MOS signal gating chopper modulator demodulator on-state resistance 14-pin SOIC SOIC package surface-mount package analog signal multiplexing 3 V to 18 V supply
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন