onsemi

MC14516BF - 4-Bit Synchronous Up/Down Counter | onsemi

MPN: MC14516BF ✓ সক্রিয়
3.0 V to 18 V Vdss 16-pin SOP (PDSO16) Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

MC14516BF সারাংশ

The onsemi MC14516BF is a 4-bit synchronous binary up/down counter built with complementary P-channel and N-channel enhancement-mode MOSFETs in a monolithic structure. It operates from a 3.0 V to 18 V supply, provides input diode protection, and is offered in a 16-pin SOP package. The counter can be incremented or decremented synchronously and can be loaded with a parallel preset value for deterministic control sequences.

A synchronous binary counter is a sequential logic device that advances or reverses its four-bit output state on each active clock transition. The MC14516BF belongs to the broader CMOS counter hierarchy, where counter ICs provide repeatable digital state generation for timing, sequencing, arithmetic, and industrial control. Unlike a simple ripple counter, its internally synchronous architecture coordinates state transitions for predictable operation in clocked digital systems.

The primary features of the MC14516BF include a 3.0 V to 18 V supply range, internal synchronization, diode protection on all inputs, and four preset inputs. Preset data can be loaded into the counter by applying the desired binary value and asserting the preset-enable control. This combination supports repeatable initialization, programmable step sequences, and compact state management in systems that need more flexibility than a fixed modulus counter.

Internally, the monolithic construction combines P-channel and N-channel enhancement-mode MOSFETs. The four output bits represent the current count, while separate direction, clock, preset-enable, and preset-data controls allow the system designer to choose between counting and parallel loading. Because the device operates from 3.0 V through 18 V, it can be used with both low-voltage digital systems and higher-voltage industrial control environments, subject to the input and output limits in the manufacturer datasheet.

Typical applications include industrial sequence controllers, programmable timing modules, digital instrumentation, batch-counting equipment, and control systems that periodically divide an event stream into groups. The counter is also useful in laboratory and test equipment where a repeatable four-bit state must advance at each clock edge. A design can use the outputs as address bits, time-slot indicators, step markers, or binary control signals.

For reliable implementation, review the manufacturer pin-description table and the input transition and timing diagrams before assigning logic levels. Account for setup and hold requirements around the clock, direction, and preset controls. Ensure unused inputs are connected to a defined valid state and include reset or preset sequencing in the controller startup routine. The 16-pin SOP footprint also requires an appropriate land pattern and adequate clearance between adjacent copper features.

This product page combines the manufacturer function description with practical sourcing, replacement, pinout-location, and circuit-integration guidance. It also distinguishes documented device characteristics from parameters that still require verification against the latest ON Semiconductor datasheet, helping engineers move from selection to schematic capture with fewer component-level questions.

এর জন্য ড্রপ-ইন বিকল্প MC14516BF — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

CD4516BNSRE4

✅ ড্রপ-ইন
📦 SOP-16
Same 4-bit, 3.0 V to 18.0 V, 16-pin counter function; listed 11 MHz frequency differs from the unconfirmed MC14516BF frequency, and some electrical characteristics differ.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

CD4516BNSRG4

✅ ড্রপ-ইন
📦 SOP-16
Same 4-bit, 3.0 V to 18.0 V, 16-pin counter function; listed 11 MHz frequency differs from the unconfirmed MC14516BF frequency, and some electrical characteristics differ.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

CD4516BNSR

✅ ড্রপ-ইন
📦 SOP-16
Same 4-bit, 3.0 V to 18.0 V, 16-pin counter function and listed 11 MHz frequency; electrical characteristics differ, so timing and output loading require verification.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MC14516BF সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Counter Type 4-bit synchronous binary up/down counter
Supply Voltage Range 3.0 V to 18 V
Logic Family CMOS
Internal Architecture Synchronous
Transistor Technology P-channel and N-channel enhancement-mode MOSFETs
Input Protection Diode protection on all inputs
Output Count Width 4 bits
Preset Inputs 4 parallel binary preset inputs
প্যাকেজ 16-pin SOP (PDSO16)
পিন সংখ্যা 16 pins
মাউন্টিং টাইপ Surface mount

MC14516BF 16-pin sop (pdso16) পিন কনফিগারেশন গাইড

MC14516BF (16-pin sop (pdso16) প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

MC14516BF-এর জন্য 16-pin sop (pdso16) প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MC14516BF.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

MC14516BF এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Sequence Controller, Programmable Timing and Event Divider, Digital Instrumentation and Test Equipment, Batch Counting and Product Tracking, Programmable Logic Controller, Digital Clock Divider and Phase Sequencer.

🏭

Industrial Sequence Controller

The MC14516BF fits an industrial sequence controller because it provides four binary state bits, selectable up or down counting, and parallel preset loading within a 3.0 V to 18 V supply range. A controller can advance one step on each active clock edge and use P0 through P3 with preset enable to return to a defined machine state. This supports repeatable actuator, relay, or process-stage sequencing without requiring a separate preset register. The synchronous internal arrangement makes the state changes easier to coordinate with surrounding control logic. Designers should still verify clock-edge timing, setup and hold requirements, and valid control states directly from the ON Semiconductor datasheet before releasing production hardware.

⏱️

Programmable Timing and Event Divider

A programmable timing module can use the MC14516BF to divide a recurring event stream into a four-bit sequence. Each active clock transition changes the count in the selected direction, providing a compact sequence of 16 representable states for time-slot selection, duty-cycle staging, or repeat-count control. The device’s 3.0 V to 18 V operating range permits use across many industrial logic levels. Preset loading allows the timer to restart from a chosen state instead of requiring an external counter reset path. For timing-critical designs, check the manufacturer’s maximum clock frequency and propagation-delay limits at the selected supply voltage before treating the counter as a precision time-base element.

🔬

Digital Instrumentation and Test Equipment

The MC14516BF can organize instrument events into a repeatable four-bit state in digital measurement and test equipment. The count outputs may represent captured samples, measurement stages, calibration steps, or pass/fail sequences, while the preset inputs allow a test cycle to begin from a known state. The 16-pin SOP package supports compact PCB layouts, and the broad 3.0 V to 18 V supply specification accommodates multiple legacy and industrial logic environments. Synchronous operation helps align count changes with the instrument’s clock. Validate noise margins, clock-edge timing, and output behavior across the complete operating voltage because instrument accuracy can depend on deterministic state transitions.

📦

Batch Counting and Product Tracking

For batch counting and product tracking, the MC14516BF provides a compact modulo-16 event tally with controllable count direction. A sensor or machine event can drive the clock, while the four outputs represent the current quantity from 0 through 15. The preset inputs are useful when a new batch must begin at a known count or when an external system initializes the sequence. Its 3.0 V to 18 V supply range is useful in industrial equipment with legacy CMOS logic levels. The design should include a defined startup state, verify the active clock edge, and ensure that the controller recognizes rollover or preset behavior before relying on the outputs for downstream decisions.

⚙️

Programmable Logic Controller

The MC14516BF can serve as a compact state sequencer within a programmable logic controller or small industrial control board. Four counter outputs provide a 16-step state code that can drive selectors, relay-enable logic, or stage indicators, while the direction input permits descending as well as ascending sequences. Preset enable and P0 through P3 let the controller jump directly to a defined state during initialization or recovery. The internal synchronous design supports coordinated transitions on the active clock edge. Engineers should establish valid logic states for every control input and check timing requirements in the ON Semiconductor datasheet before using the counter outputs as safety-critical control signals.

🕰️

Digital Clock Divider and Phase Sequencer

The MC14516BF can divide a master clock into a four-bit phase or step sequence for digital clock-distribution and timing-control circuits. Counting on each active edge, the device creates a repeating 16-state progression that can enable different circuit phases, capture windows, or sequential loads. The preset function allows the phase sequence to begin from a known position, which is useful after reset or a system-mode change. Its 3.0 V to 18 V supply range and 16-pin SOP package make it suitable for compact control logic. Confirm maximum operating frequency, propagation delay, and clock-edge behavior at the intended voltage so that generated phases retain the required timing margin.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

CD4516BNSRE4 Candidate cross-brand counter for design validation ব্যবহৃত হয়: Industrial Sequence Controller, Digital Instrumentation and Test Equipment, Programmable Logic Controller CD4516BNSRG4 Candidate cross-brand counter for sourcing comparison ব্যবহৃত হয়: Industrial Sequence Controller, Digital Instrumentation and Test Equipment, Programmable Logic Controller CD4516BNSR Candidate 4-bit counter for timing-circuit comparison ব্যবহৃত হয়: Programmable Timing and Event Divider, Batch Counting and Product Tracking, Digital Clock Divider and Phase Sequencer MC14516BF onsemi ব্যবহৃত হয়: Programmable Timing and Event Divider, Batch Counting and Product Tracking, Digital Clock Divider and Phase Sequencer
What is the MC14516BF?
The MC14516BF is a 4-bit synchronous binary up/down counter operating from 3.0 V to 18 V. According to the ON Semiconductor datasheet, the device is constructed with P-channel and N-channel enhancement-mode MOSFETs in a monolithic structure. It provides separate counting-direction and preset controls, allowing a digital system to increment, decrement, or load a selected four-bit state.
Where can I download the MC14516BF datasheet PDF?
The official MC14516BF datasheet PDF is available from ON Semiconductor at https://www.onsemi.com/download/data-sheet/pdf/mc14516b-d.pdf. It is the primary document for the 16-pin device, including its supply range of 3.0 V to 18 V, electrical characteristics, logic diagrams, and pin descriptions. Use the manufacturer document when confirming pin assignments, timing limits, and application details.
Where is the MC14516BF pinout located?
The MC14516BF pinout is located in the pin-description table of the ON Semiconductor MC14516B datasheet. The device uses a 16-pin SOP package and includes controls for clocking, counting direction, preset enable, parallel preset data, and four count outputs. Use the package drawing and pin table together so that signal names are assigned to the correct physical leads.
What are the key specifications of MC14516BF that engineers should know?
The MC14516BF is a 4-bit CMOS synchronous up/down counter with a 3.0 V to 18 V supply range. According to the ON Semiconductor datasheet, every input has diode protection and the internal implementation uses complementary P-channel and N-channel enhancement-mode MOSFETs. Its four parallel preset inputs allow a system to load a defined count before normal counting resumes.
How do I preset the MC14516BF counter?
The MC14516BF is preset by applying the desired four-bit value to P0 through P3 and bringing the preset-enable input PE high. The ON Semiconductor datasheet describes this parallel-loading method as the way to initialize the counter to a known state. The active clock edge performs the count operation, while PE provides a separate path for loading preset data.
What is the difference between up counting and down counting on the MC14516BF?
The MC14516BF increments its four-bit output when the direction control selects up counting and decrements it when the direction control selects down counting. This operation occurs synchronously on the active clock transition. The device therefore provides 16 representable four-bit states while preserving a common clock and preset structure for bidirectional sequencing.
Can the MC14516BF operate from a 5 V supply?
Yes, a 5 V supply is within the MC14516BF manufacturer-specified operating range of 3.0 V to 18 V. The ON Semiconductor datasheet also requires designers to check individual input thresholds, output levels, and timing values at the chosen supply voltage. Confirm those conditions and the unused-input states before finalizing the circuit.
Is the MC14516BF suitable for industrial sequencing?
The MC14516BF is suitable for industrial sequencing when its 3.0 V to 18 V supply range, four-bit state, and parallel preset capability meet the machine-control requirements. Its synchronous counting architecture supports deterministic step changes, while preset loading provides a repeatable starting condition. The 16-pin SOP package also supports compact assembly on a surface-mount PCB.
What is the best drop-in replacement for MC14516BF?
The MC14516BF replacement choice depends on verified package, logic, timing, and electrical compatibility rather than function alone. The CD4516BNSRE4 and CD4516BNSRG4 are documented as 16-pin, 4-bit, 3.0 V to 18.0 V up/down counters and are the closest cross-brand options identified. Confirm the complete pinout and AC timing requirements before approving either substitution.
Can the CD4516BNSRE4 replace the MC14516BF?
The CD4516BNSRE4 is a candidate replacement for the MC14516BF because both are identified as 4-bit, 3.0 V to 18.0 V, 16-pin binary up/down counters. It should be treated as a conditional drop-in candidate until the pin arrangement, preset behavior, clock-edge definition, propagation delay, and output-drive characteristics are checked against the MC14516B datasheet.
What is the best Texas Instruments equivalent for MC14516BF?
The Texas Instruments CD4516BNSRE4 is the closest identified TI equivalent to the onsemi MC14516BF. The comparison record describes it as a 4-bit, 3.0 V to 18.0 V, 16-pin counter with an 11 MHz listed operating frequency, but it also notes that some electrical characteristics differ. Validate timing and pin compatibility in the target design before substitution.
When should I choose the MC14516BF over a CD4516B counter?
Choose the MC14516BF when an existing design has already been qualified around the ON Semiconductor MC14516B function, timing, and 16-pin footprint. Consider the CD4516B options when sourcing flexibility or a different manufacturer’s qualification is more important and the complete electrical comparison has been completed. The shared 4-bit, 3.0 V to 18.0 V description does not eliminate timing or pin-level verification.
Is MC14516BF in stock?
Current MC14516BF inventory must be checked through the Request a Quote form on this page because the MC14516BF listing does not state a fixed stock quantity. The part is identified as a 16-pin, 4-bit synchronous up/down counter in the 3.0 V to 18.0 V supply range. Submit the required quantity, package form, and target date with the quote request.
What is the price of MC14516BF?
The current MC14516BF price depends on quantity, requested package form, and market availability. Use the Request a Quote form on this page for a current quotation rather than relying on a stale online figure. The quote request should identify the exact MC14516BF ordering code, target quantity, delivery location, and required production schedule.
What is the lead time for MC14516BF?
MC14516BF lead time must be confirmed for the requested quantity and delivery schedule through the Request a Quote form on this page. The device is specified as a 4-bit synchronous up/down counter with a 3.0 V to 18.0 V supply range in a 16-pin SOP package. Include any required source-program or date-code instructions in the request.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MC14516BF — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the MC14516BF when the design is qualified around the onsemi MC14516B family, requires a 4-bit synchronous up/down counter, and operates from 3.0 V to 18 V. Its documented diode-protected inputs and parallel preset interface make it suitable for industrial sequencing, timing division, batch counting, and programmable state control. Consider the CD4516BNSRE4, CD4516BNSRG4, or CD4516BNSR when dual-manufacturer sourcing is valuable and their complete electrical characteristics meet the circuit requirements. Each candidate is described as a 4-bit, 3.0 V to 18.0 V, 16-pin counter, but the comparison record notes electrical differences and lists a maximum frequency of 11 MHz. Before approving a drop-in substitution, compare the pin arrangement, clock-edge definition, propagation delay, setup and hold timing, output drive, input leakage, and power behavior. Use the manufacturer datasheet for each candidate rather than assuming functional equivalence guarantees timing equivalence.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য CD4516BNSRE4 CD4516BNSRG4 CD4516BNSR
Package SOP-16 (PDSO16) SOP-16 SOP-16 SOP-16
Brand onsemi Texas Instruments Texas Instruments Texas Instruments
Counter Type 4-bit synchronous binary up/down counter 4-bit binary up/down counter 4-bit binary up/down counter 4-bit binary up/down counter
Supply Voltage Range 3.0 V to 18 V 3.0 V to 18.0 V 3.0 V to 18.0 V 3.0 V to 18.0 V
Output Width 4 bits 4 bits 4 bits 4 bits
Pin Count 16 pins 16 pins 16 pins 16 pins
Preset Function Parallel preset with preset enable Counter preset function Counter preset function Counter preset function

মূল পার্থক্যসমূহ

  • Direct onsemi source for the MC14516B family (বনামCD4516BNSRE4)
  • Synchronous internal architecture (বনামCD4516BNSRG4)
  • Parallel preset with dedicated enable control (বনামCD4516BNSR)

ডিজাইন নোট

Treat the clock edge, count direction, preset enable, and preset data as a coordinated control interface. Do not assume that changing direction is safe at every clock boundary; establish the intended direction before the active edge. Use the ON Semiconductor logic diagrams and timing specifications to confirm setup and hold requirements, and give every control input a defined state during startup and reset.

Follow the manufacturer package drawing when creating the 16-pin SOP land pattern and confirm pin 1 orientation against the PCB silkscreen and component marking. Place bypass capacitors near the supply and ground connections, route clock traces away from noisy analog or switching nodes, and maintain adequate clearance between adjacent signals. Confirm land dimensions against the latest package drawing before fabrication.

The counter should be clocked by a clean, repeatable signal because timing errors can appear as incorrect count or preset behavior. Keep the clock path short, provide a low-impedance return path, and avoid unnecessary stubs or test-pad capacitance on sensitive timing nodes. Validate the maximum operating frequency, propagation delay, and setup margins at the actual supply voltage used by the finished assembly.

Decouple the supply close to the device with capacitance selected from the ON Semiconductor datasheet and the switching characteristics of the surrounding circuit. The documented supply range is 3.0 V to 18 V, but the valid operating range for every input and output also depends on VDD and temperature. Check the complete electrical-characteristics table before selecting pull-up, pull-down, or interface components.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

No explicit environmental or automotive qualification status was identified for the MC14516BF. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 status with ON Semiconductor before procurement.

ডেটা যাচাই করা হয়েছে: 2026-11-11 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

mc14516b datasheet mc14516b onsemi MC14516BF datasheet pdf MC14516BF pinout MC14516BF 4-bit counter MC14516BF 3V to 18V MC14516BF SOP-16 MC14516BF synchronous up down counter MC14516BF equivalent MC14516BF replacement MC14516BF vs CD4516BNSRE4 MC14516BF footprint MC14516BF price MC14516BF stock

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

onsemi ON Semiconductor MC14516BF MC14516B CD4516BNSRE4 CD4516BNSRG4 CD4516BNSR 4-bit binary counter synchronous counter up/down counter logic IC CMOS logic sequential logic P-channel MOSFET N-channel MOSFET parallel preset preset enable SOP-16 PDSO16 surface mount diode-protected input industrial sequencing digital timing binary control signal 3.0 V to 18 V
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন