onsemi

MC14541BFG - 3MHz Programmable Timer IC | onsemi

MPN: MC14541BFG ✓ সক্রিয়
14-pin SOIC Package 3 MHz Speed
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

MC14541BFG সারাংশ

The onsemi MC14541BFG is a 3MHz programmable timer integrated circuit with a 16-stage binary counter, an integrated oscillator, automatic power-on reset, and output control logic. The device is packaged in a 14-pin SOIC surface-mount package. Its internal oscillator works with an external capacitor and two resistors, allowing the timing network to be established by the application rather than an external clock generator.

A programmable timer is a clock-and-timing semiconductor that divides time or generates periodic events from an oscillator. The MC14541B belongs to the broader CMOS timer hierarchy, where an oscillator establishes the base frequency and a binary counter produces a selectable division ratio. This arrangement is useful when a circuit requires repeated timing events without dedicating a microcontroller to simple delay, pulse, or periodic-output functions.

The MC14541B's principal functional characteristics include its 16-stage binary counter, 3MHz maximum listed frequency, integrated oscillator, automatic power-on reset, and output control logic. The counter architecture allows one oscillator timing network to support multiple timing divisions. Automatic power-on reset establishes a defined starting condition when power is applied, reducing the amount of external initialization required by the host circuit.

Technically, the timer combines an analog oscillator interface with digital counting and control functions. The external capacitor and two timing resistors determine the oscillator's behavior, while the 16-stage counter creates the longer timing intervals required by industrial and control applications. Because the MC14541B is a CMOS logic-family device, the design belongs to a low-power digital timing category suited to control logic rather than high-current power conversion.

Typical applications include periodic event generation, delayed control actions, basic pulse and timing circuits, oscillator modules, and repetitive switching sequences in industrial equipment. It can also serve as a clock source in small embedded systems where a programmable divider is sufficient and a full microcontroller would add unnecessary complexity. The 14-pin SOIC package supports conventional surface-mount assembly and compact PCB layouts.

Design consideration: calculate the oscillator network and allowable divider range across the complete operating-voltage range, not only at the nominal supply voltage. Confirm that the selected output frequency, reset timing, and counter range satisfy the application before committing the external resistor and capacitor values. Use the onsemi datasheet pin-description and timing tables when assigning PCB functions and validating startup behavior.

This page combines the device architecture, verified timing attributes, package information, practical application guidance, and drop-in comparison candidates with the engineering details needed to plan a replacement or evaluate the MC14541BFG for a new design.

এর জন্য ড্রপ-ইন বিকল্প MC14541BFG — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible MC14541BFG (একই form factor এবং footprint) — পার্থক্য রয়েছে Product Type.

Texas Instruments
Product Type: CMOS programmable timer
এর সাথে তুলনা করুন MC14541BFG →

MC14541BDG

✅ ড্রপ-ইন
onsemi
📦 SOIC-14
Programmable timer IC · 3 MHz · 16 stages · 3 V to 18 V · -55 °C to 125 °C · 14-pin SOIC · Surface mount

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MC14541BDR2

✅ ড্রপ-ইন
📦 SOIC-14
Same listed 14-pin SOIC format and 3MHz timer class; ordering suffix differs while the published common ratings show a 0% difference.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

CD4541BM

✅ ড্রপ-ইন
Texas Instruments
📦 SOIC-14
CMOS programmable timer · 20 V · 100 kHz · 16-stage binary counter · 2 external resistors and 1 external capacitor · -55 °C to +125 °C · 14-pin SOIC

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MC14541BFG বিশেষণ

Product Type Programmable timer IC
Maximum Listed Frequency 3 MHz
Counter Architecture 16-stage binary counter
Oscillator Integrated, with external capacitor and two resistors
Power-On Reset Automatic
Output Control Integrated output control logic
Logic Family CMOS
প্যাকেজ 14-pin SOIC
মাউন্টিং টাইপ Surface mount
পিন সংখ্যা 14 pins

MC14541BFG 14-pin soic পিন কনফিগারেশন গাইড

MC14541BFG (14-pin soic প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

MC14541BFG-এর জন্য 14-pin soic প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MC14541BFG.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

MC14541BFG এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Periodic Control, Industrial Delay and Strobe Timing, Timing Signal Generator, Automated Test Sequencing, Appliance and Consumer Control, Embedded Clock and Divider.

🏭

Industrial Periodic Control

The MC14541BFG fits industrial periodic-control circuits that need a repeatable event without a microcontroller. Its 16-stage binary counter divides the oscillator signal into selectable intervals, while automatic power-on reset establishes a defined starting state. Connect the external capacitor and two resistors to the oscillator pins, select the required counter division, and use the output-control logic to trigger relays, counters, or status indicators. The 3MHz maximum listed frequency supports clocking above many low-speed control-loop requirements, but the timing network must be recalculated for temperature and component tolerance.

🏭

Industrial Delay and Strobe Timing

The MC14541BFG can generate delayed strobes, machine-sequence intervals, and repeatable actuator pulses in industrial control equipment. The 16-stage counter converts a compact oscillator network into much longer timing intervals, avoiding a separate counter or processor for simple sequencing. Automatic power-on reset helps initialize the timing chain, while the integrated output control supports periodic or selected-count events. Validate output polarity and the number of usable divider stages in the onsemi MC14541B datasheet before assigning the output to a safety-related or process-critical actuator.

⚡

Timing Signal Generator

The MC14541BFG serves as a compact timing-signal generator when a circuit needs a stable square-wave reference or divided clock. Its integrated oscillator accepts an external capacitor and two resistors, and the 16-stage binary counter provides selectable division ratios up to the device's 3MHz maximum listed frequency. Because the output frequency depends on supply voltage, component tolerance, and the selected divider, use the manufacturer timing tables when determining frequency accuracy. The 14-pin SOIC package also simplifies reworking and allows the timer to share a PCB with surrounding CMOS control logic.

🖥️

Automated Test Sequencing

The MC14541BFG can implement repeatable test-step delays in compact automated test equipment. Instead of assigning a microcontroller timer to a single periodic event, engineers can use the 16-stage counter to derive longer intervals from a small oscillator network. Automatic power-on reset provides repeatable initialization, and the output-control logic can initiate a measurement, relay transition, or fixture change. The design must account for the maximum listed frequency of 3MHz, startup behavior, and component tolerances so that accumulated timing error remains within the test-system requirement.

🏠

Appliance and Consumer Control

The MC14541BFG is appropriate for appliance and consumer-control boards that need a simple delayed or periodic function, such as a timed relay, indicator, or switch sequence. Its dedicated timer architecture reduces component count compared with assigning a microcontroller to a narrowly defined timing task. The 16-stage counter supports long intervals derived from a compact external RC network, and automatic power-on reset reduces startup coordination. Validate the operating temperature, supply range, and timing tolerances in the onsemi datasheet because these requirements are especially important for mains-connected household equipment.

🔧

Embedded Clock and Divider

The MC14541BFG can divide a base oscillator into a slower periodic clock for counters, sampling controls, and supervisory logic. Its 16-stage binary counter provides multiple timing divisions, while automatic power-on reset defines the initial count after power application. Place the device near the circuits requiring the divided clock and keep the oscillator network compact to reduce noise pickup and timing variation. The 3MHz maximum listed frequency gives substantial headroom for clock division, although the final output must be checked for duty-cycle distortion and supply-dependent timing changes.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

What is the onsemi MC14541BFG?
The onsemi MC14541BFG is a 3MHz programmable timer IC in a 14-pin SOIC package. According to the onsemi MC14541B datasheet, it combines a 16-stage binary counter, an integrated oscillator for an external capacitor and two resistors, an automatic power-on reset, and output control logic. It is intended for recurring timing, delay, oscillator, and periodic-output functions in CMOS logic systems.
How does the MC14541B oscillator work?
The MC14541B uses its integrated oscillator with an external timing capacitor and two resistors to establish the base timing frequency. The oscillator signal feeds a 16-stage binary counter, which divides the frequency into selectable timing intervals. The onsemi MC14541B datasheet identifies a maximum listed frequency of 3MHz, making the timer suitable for digital timing and control circuits rather than high-frequency clock synthesis.
What is the maximum frequency of MC14541BFG?
The MC14541BFG has a maximum listed frequency of 3MHz, as identified in the onsemi product listing and MC14541B datasheet. Operating at or near this limit requires validation against the actual supply voltage, external resistor and capacitor values, temperature range, and output-divider configuration. Use the datasheet timing characteristics to determine whether a particular oscillator frequency retains acceptable duty-cycle and timing tolerance.
Where can I download the MC14541B datasheet PDF?
The MC14541B manufacturer datasheet is available through the onsemi MC14541B datasheet link on this page. The document describes the 16-stage binary counter, integrated oscillator, automatic power-on reset, output control logic, 3MHz maximum listed frequency, and 14-pin SOIC connection information. Use the manufacturer document for authoritative pin descriptions, electrical limits, timing tables, and application guidance.
Where is the MC14541BFG pinout located?
The MC14541BFG pinout is identified in the pin-description section of the onsemi MC14541B datasheet, which covers the 14-pin SOIC package. The connector data also identifies the device as a 14-pin SOEIAJ-14 programmable timer. Use the manufacturer pin table to map oscillator, counter, reset, supply, ground, and output connections before assigning PCB nets or designing a replacement layout.
Can MC14541BFG replace a CD4541BM timer?
The MC14541BFG can be evaluated as a drop-in candidate for the CD4541BM because both are listed as 14-pin SOIC programmable timers, but final approval depends on the complete pinout and operating limits. The public comparison identifies both devices as 14-pin SOIC clock-and-timing ICs. Verify enable or reset behavior, output polarity, supply range, frequency limits, and timing accuracy against the manufacturer datasheets before substitution.
MC14541BFG vs MC14541BDG: which should I choose?
Choose the MC14541BFG when its specific ordering code and temperature qualification match the product requirements; otherwise, MC14541BDG may serve as a pin-compatible candidate. Both are listed as onsemi 14-pin SOIC versions of the MC14541B programmable timer with a 16-stage counter and 3MHz maximum listed frequency. Confirm the suffix-specific grade, packaging, temperature range, and marking requirements before final selection.
What is the best drop-in replacement for MC14541BFG?
The best drop-in replacement is the onsemi variant whose pinout, electrical limits, timing behavior, and suffix-specific qualification match the MC14541BFG. MC14541BDG and MC14541BDR2 are same-family 14-pin candidates identified in public comparison data, while the Texas Instruments CD4541BM is a cross-brand 14-pin candidate. Because operating limits are not reproduced for every candidate, verify them in the applicable manufacturer datasheet before approving a replacement.
When should I choose MC14541BFG over a microcontroller timer?
Choose the MC14541BFG when the task requires only periodic timing, delay generation, division, or a simple oscillator and does not require programmable firmware, complex event handling, or multiple communication peripherals. The dedicated timer provides a 16-stage binary counter and 3MHz maximum listed frequency in 14 pins. A microcontroller remains preferable when timing must change dynamically or coordinate multiple software-driven functions.
Is MC14541BFG suitable for industrial control and automation systems?
The MC14541BFG is suitable for timing functions in industrial control and automation systems that operate within its specified electrical limits. Its 16-stage binary counter, automatic power-on reset, integrated oscillator interface, and output control logic make it useful for repeatable delays and periodic control events. Confirm operating temperature, supply voltage, output-drive capability, and timing tolerance against the onsemi datasheet for the target industrial environment.
How much power does MC14541BFG consume?
The MC14541BFG quiescent current and switching-current limits must be taken from the onsemi MC14541B datasheet for the actual supply voltage and operating frequency. The device is a CMOS timer containing an oscillator, a 16-stage counter, reset logic, and output control. A precise power budget should include static supply current plus dynamic current associated with the selected output divider and external timing network.
Where can I buy MC14541BFG and what is the lead time?
Use the Request a Quote form on this page to request MC14541BFG pricing, current stock, minimum order quantity, and production lead time. The quote team can confirm the exact 14-pin SOIC ordering code, packing method, quantity required, and delivery schedule. This page does not present a fixed commercial price because inventory and procurement terms can change for this programmable timer.
How do I calculate the MC14541B oscillator timing?
Calculate the oscillator timing from the external capacitor and two resistor values using the relationship and tolerances defined in the onsemi MC14541B datasheet, then select the counter divider for the required output interval. Include resistor tolerance, capacitor tolerance, temperature effects, supply variation, and startup behavior. The 3MHz maximum listed frequency is an upper device rating, not a substitute for the application-specific timing calculation.
Is MC14541BFG compliant with RoHS and REACH?
The MC14541BFG compliance status must be confirmed from the current onsemi product declaration or material-composition documentation for the exact ordering code. RoHS and REACH status cannot be selected solely from the MC14541 family name because package, terminal finish, and ordering-code requirements can vary. Request the applicable compliance documents through the Request a Quote form before using the timer in a regulated production design.
What can replace MC14541BFG without changing the PCB?
A PCB-compatible replacement must use the same 14-pin SOIC footprint and preserve the oscillator, reset, supply, counter, and output connections. MC14541BDG, MC14541BDR2, and the Texas Instruments CD4541BM are candidates identified in public comparison information, but each still requires pin-level and electrical validation. Review both manufacturer datasheets rather than assuming that a shared 14-pin package guarantees equivalent behavior.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MC14541BFG — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the MC14541BFG when a design needs a dedicated 14-pin CMOS timer with an integrated RC oscillator, automatic power-on reset, a 16-stage binary counter, and a 3MHz maximum listed frequency. It is well suited to periodic control, delayed strobes, test sequencing, and simple clock division where firmware flexibility is unnecessary. MC14541BDG and MC14541BDR2 are the closest same-brand candidates when their suffix-specific qualification, packing, and temperature requirements fit the product. Consider the Texas Instruments CD4541BM as a cross-brand option only after checking pin behavior, supply limits, timing accuracy, and output polarity. For applications requiring dynamic timing changes, multiple synchronized outputs, or complex event sequencing, use a timer peripheral in a microcontroller instead. For replacement work, compare every pin and timing parameter in the applicable manufacturer datasheet before changing the assembled PCB.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য MC14541BDG MC14541BDR2 CD4541BM
Package SOIC-14 SOIC-14 SOIC-14 SOIC-14
Brand onsemi onsemi onsemi Texas Instruments
Product Type Programmable timer IC Programmable timer IC Programmable timer IC Programmable timer
Integrated Oscillator Yes Yes Yes Yes
Pin Count 14 pins 14 pins 14 pins 14 pins
Mounting Type Surface mount Surface mount Surface mount Surface mount

মূল পার্থক্যসমূহ

  • Dedicated 16-stage timer architecture (বনামCD4541BM)
  • Automatic power-on reset (বনামCD4541BM)
  • Same-family 14-pin sourcing options (বনামMC14541BDG)

ডিজাইন নোট

Calculate the timing network over the complete supply-voltage range because oscillator frequency can change as the CMOS operating point moves. Include resistor tolerance, capacitor tolerance, temperature coefficient, and the maximum 3MHz device limit. After selecting the external capacitor and two resistors, verify the startup waveform and divider output duty cycle with a scope before treating the MC14541BFG as a precision time reference.

Place the external oscillator capacitor and two resistors close to the associated MC14541BFG pins to minimize parasitic resistance, capacitance, and noise pickup. Keep the oscillator loop compact and route it away from switching nodes and high-current return paths. Use a quiet ground reference for the timer and avoid sharing long, resistive ground connections with relays, displays, or other noisy actuators.

Do not assume that every 14-pin SOIC timer has identical reset, output, or oscillator connections. Before substituting MC14541BDG, MC14541BDR2, or CD4541BM, compare each pin in the manufacturer pin-description tables, including output polarity and any reset or inhibit function. A matching package dimensions alone does not guarantee that the PCB will operate correctly after replacement.

Check the divided-clock output at the highest intended input frequency and across temperature. The 3MHz maximum listed frequency is a device limit rather than a guarantee of acceptable timing accuracy or duty cycle. If a downstream circuit requires a clean duty cycle, add an appropriate line driver or buffer rather than relying directly on a marginal oscillator waveform.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

Compliance declarations for the exact MC14541BFG ordering code require confirmation from onsemi. The MC14541BFG is an industrial timer, but automotive qualification must not be inferred from the family name.

ডেটা যাচাই করা হয়েছে: 2026-11-16 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

MC14541BFG datasheet MC14541BFG pinout MC14541BFG datasheet pdf MC14541BFG equivalent MC14541BFG replacement MC14541BFG cross reference MC14541BFG schematic MC14541BFG footprint MC14541BFG price MC14541BFG stock onsemi MC14541BFG MC14541BFG 3MHz timer MC14541BFG SOIC-14 MC14541BFG vs CD4541BM MC14541BFG application circuit

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

onsemi MC14541BFG MC14541B MC14541BDG MC14541BDR2 CD4541BM Texas Instruments programmable timer clock and timing IC CMOS timer binary counter integrated oscillator automatic power-on reset output control logic 3MHz oscillator RC oscillator SOIC-14 surface mount industrial timing periodic control clock divider RoHS REACH
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন