MC14541BFG - 3MHz Programmable Timer IC | onsemi
MPN: MC14541BFG ✓ 啟用中MC14541BFG 概覽
A programmable timer is a clock-and-timing semiconductor that divides time or generates periodic events from an oscillator. The MC14541B belongs to the broader CMOS timer hierarchy, where an oscillator establishes the base frequency and a binary counter produces a selectable division ratio. This arrangement is useful when a circuit requires repeated timing events without dedicating a microcontroller to simple delay, pulse, or periodic-output functions.
The MC14541B's principal functional characteristics include its 16-stage binary counter, 3MHz maximum listed frequency, integrated oscillator, automatic power-on reset, and output control logic. The counter architecture allows one oscillator timing network to support multiple timing divisions. Automatic power-on reset establishes a defined starting condition when power is applied, reducing the amount of external initialization required by the host circuit.
Technically, the timer combines an analog oscillator interface with digital counting and control functions. The external capacitor and two timing resistors determine the oscillator's behavior, while the 16-stage counter creates the longer timing intervals required by industrial and control applications. Because the MC14541B is a CMOS logic-family device, the design belongs to a low-power digital timing category suited to control logic rather than high-current power conversion.
Typical applications include periodic event generation, delayed control actions, basic pulse and timing circuits, oscillator modules, and repetitive switching sequences in industrial equipment. It can also serve as a clock source in small embedded systems where a programmable divider is sufficient and a full microcontroller would add unnecessary complexity. The 14-pin SOIC package supports conventional surface-mount assembly and compact PCB layouts.
Design consideration: calculate the oscillator network and allowable divider range across the complete operating-voltage range, not only at the nominal supply voltage. Confirm that the selected output frequency, reset timing, and counter range satisfy the application before committing the external resistor and capacitor values. Use the onsemi datasheet pin-description and timing tables when assigning PCB functions and validating startup behavior.
This page combines the device architecture, verified timing attributes, package information, practical application guidance, and drop-in comparison candidates with the engineering details needed to plan a replacement or evaluate the MC14541BFG for a new design.
直接替換替代品,適用於 MC14541BFG — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MC14541BFG (相同外形與佔位) — 差異在於 Product Type.
MC14541BDG
✅ 直接替換聯絡詢價
查看資料表 →MC14541BDR2
✅ 直接替換📋 參考替代品(不在目錄中)
MC14541BFG 規格
| Product Type | Programmable timer IC |
| Maximum Listed Frequency | 3 MHz |
| Counter Architecture | 16-stage binary counter |
| Oscillator | Integrated, with external capacitor and two resistors |
| Power-On Reset | Automatic |
| Output Control | Integrated output control logic |
| Logic Family | CMOS |
| 封裝 | 14-pin SOIC |
| 安裝類型 | Surface mount |
| 腳位數 | 14 pins |
MC14541BFG 14-pin soic 腳位配置指南
MC14541BFG(14-pin soic 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: MC14541BFG.
請參閱 資料表 以查看完整腳位配置。
典型應用
MC14541BFG 適用於 6 應用s: Industrial Periodic Control, Industrial Delay and Strobe Timing, Timing Signal Generator, Automated Test Sequencing, Appliance and Consumer Control, Embedded Clock and Divider.
Industrial Periodic Control
The MC14541BFG fits industrial periodic-control circuits that need a repeatable event without a microcontroller. Its 16-stage binary counter divides the oscillator signal into selectable intervals, while automatic power-on reset establishes a defined starting state. Connect the external capacitor and two resistors to the oscillator pins, select the required counter division, and use the output-control logic to trigger relays, counters, or status indicators. The 3MHz maximum listed frequency supports clocking above many low-speed control-loop requirements, but the timing network must be recalculated for temperature and component tolerance.
推薦
Industrial Delay and Strobe Timing
The MC14541BFG can generate delayed strobes, machine-sequence intervals, and repeatable actuator pulses in industrial control equipment. The 16-stage counter converts a compact oscillator network into much longer timing intervals, avoiding a separate counter or processor for simple sequencing. Automatic power-on reset helps initialize the timing chain, while the integrated output control supports periodic or selected-count events. Validate output polarity and the number of usable divider stages in the onsemi MC14541B datasheet before assigning the output to a safety-related or process-critical actuator.
推薦
Timing Signal Generator
The MC14541BFG serves as a compact timing-signal generator when a circuit needs a stable square-wave reference or divided clock. Its integrated oscillator accepts an external capacitor and two resistors, and the 16-stage binary counter provides selectable division ratios up to the device's 3MHz maximum listed frequency. Because the output frequency depends on supply voltage, component tolerance, and the selected divider, use the manufacturer timing tables when determining frequency accuracy. The 14-pin SOIC package also simplifies reworking and allows the timer to share a PCB with surrounding CMOS control logic.
推薦
Automated Test Sequencing
The MC14541BFG can implement repeatable test-step delays in compact automated test equipment. Instead of assigning a microcontroller timer to a single periodic event, engineers can use the 16-stage counter to derive longer intervals from a small oscillator network. Automatic power-on reset provides repeatable initialization, and the output-control logic can initiate a measurement, relay transition, or fixture change. The design must account for the maximum listed frequency of 3MHz, startup behavior, and component tolerances so that accumulated timing error remains within the test-system requirement.
推薦
Appliance and Consumer Control
The MC14541BFG is appropriate for appliance and consumer-control boards that need a simple delayed or periodic function, such as a timed relay, indicator, or switch sequence. Its dedicated timer architecture reduces component count compared with assigning a microcontroller to a narrowly defined timing task. The 16-stage counter supports long intervals derived from a compact external RC network, and automatic power-on reset reduces startup coordination. Validate the operating temperature, supply range, and timing tolerances in the onsemi datasheet because these requirements are especially important for mains-connected household equipment.
推薦
Embedded Clock and Divider
The MC14541BFG can divide a base oscillator into a slower periodic clock for counters, sampling controls, and supervisory logic. Its 16-stage binary counter provides multiple timing divisions, while automatic power-on reset defines the initial count after power application. Place the device near the circuits requiring the divided clock and keep the oscillator network compact to reduce noise pickup and timing variation. The 3MHz maximum listed frequency gives substantial headroom for clock division, although the final output must be checked for duty-cycle distortion and supply-dependent timing changes.
推薦
推薦產品摘要
工程參考資料,適用於 MC14541BFG — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MC14541BDG | MC14541BDR2 | CD4541BM |
|---|---|---|---|---|
| Package | SOIC-14 | SOIC-14 | SOIC-14 | SOIC-14 |
| Brand | onsemi | onsemi | onsemi | Texas Instruments |
| Product Type | Programmable timer IC | Programmable timer IC | Programmable timer IC | Programmable timer |
| Integrated Oscillator | Yes | Yes | Yes | Yes |
| Pin Count | 14 pins | 14 pins | 14 pins | 14 pins |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount |
主要差異化特點
- Dedicated 16-stage timer architecture (對比CD4541BM)
- Automatic power-on reset (對比CD4541BM)
- Same-family 14-pin sourcing options (對比MC14541BDG)
設計說明
Calculate the timing network over the complete supply-voltage range because oscillator frequency can change as the CMOS operating point moves. Include resistor tolerance, capacitor tolerance, temperature coefficient, and the maximum 3MHz device limit. After selecting the external capacitor and two resistors, verify the startup waveform and divider output duty cycle with a scope before treating the MC14541BFG as a precision time reference.
Place the external oscillator capacitor and two resistors close to the associated MC14541BFG pins to minimize parasitic resistance, capacitance, and noise pickup. Keep the oscillator loop compact and route it away from switching nodes and high-current return paths. Use a quiet ground reference for the timer and avoid sharing long, resistive ground connections with relays, displays, or other noisy actuators.
Do not assume that every 14-pin SOIC timer has identical reset, output, or oscillator connections. Before substituting MC14541BDG, MC14541BDR2, or CD4541BM, compare each pin in the manufacturer pin-description tables, including output polarity and any reset or inhibit function. A matching package dimensions alone does not guarantee that the PCB will operate correctly after replacement.
Check the divided-clock output at the highest intended input frequency and across temperature. The 3MHz maximum listed frequency is a device limit rather than a guarantee of acceptable timing accuracy or duty cycle. If a downstream circuit requires a clean duty cycle, add an appropriate line driver or buffer rather than relying directly on a marginal oscillator waveform.
合規資訊
Compliance declarations for the exact MC14541BFG ordering code require confirmation from onsemi. The MC14541BFG is an industrial timer, but automotive qualification must not be inferred from the family name.