onsemi

MC1455BP1G - 5/15V Single Timer | onsemi | DIP-8

MPN: MC1455BP1G ✓ সক্রিয়
5 V or 15 V Vdss 8-pin PDIP Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

MC1455BP1G সারাংশ

The onsemi MC1455BP1G is a single 555-type timer and oscillator integrated circuit designed for 5 V and 15 V power supplies in an 8-pin PDIP package. It supports monostable time-delay, astable oscillation, and trigger or reset operation, with timing controlled by one external resistor and one capacitor. The device operates from -40°C to +85°C and is supplied in a tube.

A monolithic timer is a timing circuit that switches its output after a defined interval. The MC1455 family belongs to the timer and oscillator hierarchy within analog integrated circuits, combining a resistor-controlled timing network with an internal threshold comparator, trigger comparator, output latch, and discharge transistor. In astable mode, the output repeatedly charges and discharges an external capacitor; in monostable mode, one trigger event produces a single timed output pulse.

The MC1455BP1G supports supply voltages of 5 V and 15 V and provides separate trigger and reset terminals when those functions are needed. Its resistor-and-capacitor timing architecture allows the delay or oscillation frequency to be established with external components rather than an internal clock. This makes the device suitable for repeatable pulse generation, delay stages, tone generation, and periodic control functions.

The circuit combines analog timing thresholds with a logic-level output stage. During astable operation, the external capacitor voltage moves between the internal reference thresholds while the discharge transistor controls the resistor path. The resulting oscillation frequency and duty cycle depend on the selected resistance and capacitance values, so component tolerance directly affects timing accuracy. Monostable operation uses one triggering transition to initiate a single output pulse whose duration is controlled by one timing resistor and capacitor.

Typical applications include industrial pulse and delay circuits, oscillator modules, indicator flashing, periodic actuator control, signal-processing test equipment, and educational timer demonstrations. The -40°C to +85°C operating range supports industrial equipment, while the through-hole PDIP package simplifies hand assembly, prototyping, socketed construction, and replacement in legacy designs.

Designers should treat the trigger and reset inputs carefully because they influence internal state even when those functions are not used. Verify threshold and discharge-pin behavior against the manufacturer datasheet, maintain stable timing-component tolerances, and provide adequate decoupling between the supply pins and ground. The 5 V and 15 V supply designations should not be treated as a continuous operating range between those points without consulting the device limits.

This product record combines the manufacturer timing-circuit description with package, temperature, supply-voltage, and commercial information to support engineering selection. It also provides same-footprint replacement guidance, application-specific design considerations, and a parameter comparison intended to make PCB reuse decisions more transparent.

এর জন্য ড্রপ-ইন বিকল্প MC1455BP1G — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible MC1455BP1G (একই form factor এবং footprint) — পার্থক্য রয়েছে Mounting Type, Package, Number of Timers, Operating Modes, Product Type.

onsemi
Mounting Type: Through-hole DIP
Product Type: 555-type monolithic timer and oscillator
এর সাথে তুলনা করুন MC1455BP1G →
Texas Instruments
Package: 8-PDIP (through-hole DIP-8)
Number of Timers: 1
Operating Modes: Astable, Monostable
এর সাথে তুলনা করুন MC1455BP1G →

MC1455P1G

✅ ড্রপ-ইন
onsemi
📦 8-pin PDIP
555-type monolithic timer and oscillator · Monostable and astable operation · 4.5 V to 16 V · Adjustable-duty-cycle timer output · 1 external resistor and 1 external capacitor in time-delay mode · External trigger terminal · External reset terminal · 8-pin PDIP

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

NE555N

✅ ড্রপ-ইন
📦 8-pin PDIP
Equivalent single 555 timer in an 8-pin PDIP package; supply, timing, and temperature limits require comparison against MC1455BP1G

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

NA555P

✅ ড্রপ-ইন
📦 8-pin PDIP
Single precision timer in an 8-pin PDIP package; specific voltage, timing, and trigger/reset differences require verification

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

NE555P

✅ ড্রপ-ইন
Texas Instruments
📦 8-pin PDIP
Precision Timer / Oscillator (Single) · 555 type, bipolar · 1 · Astable, Monostable · 100 kHz · 4.5 V to 16 V · 10 mA · ±200 mA (sink/source)

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MC1455BP1G বিশেষণ

Timer Type 555 Type
Number of Timers 1 timer
Operating Modes Monostable and astable
সাপ্লাই ভোল্টেজ 5 V or 15 V
প্যাকেজ 8-pin PDIP
Terminal Count 8 terminals
অপারেটিং তাপমাত্রা -40°C to +85°C
Timing Control One external resistor and one external capacitor
Trigger Function Separate trigger terminal
Reset Function Separate reset terminal
Output Timing Precisely controlled delay or oscillation
Terminal Finish Tin Sn
Packaging Tube
মাউন্টিং টাইপ Through-hole

MC1455BP1G 8-pin pdip পিন কনফিগারেশন গাইড

MC1455BP1G (8-pin pdip প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

MC1455BP1G-এর জন্য 8-pin pdip প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MC1455BP1G.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

MC1455BP1G এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Pulse and Delay Control, Astable Oscillator and Tone Generation, Legacy Through-Hole Timer Board, Indicator Flashing and Periodic Triggering, Test and Measurement Pulse Source, Educational Electronics Timing Circuit.

🏭

Industrial Pulse and Delay Control

The MC1455BP1G is suitable for industrial delay and pulse-control circuits because it combines a single 555 timer, a -40°C to +85°C operating range, and timing controlled by one external resistor and capacitor. In monostable operation, a trigger event starts one output pulse whose interval is established by the timing network. This arrangement is useful for actuator delay, relay sequencing, and one-shot control stages where a deterministic transition is required. The 8-pin PDIP package also permits socketed implementation where serviceability or replacement is important. Engineers should calculate the timing components for the full temperature range, verify trigger and reset levels against the datasheet, and include local supply decoupling to prevent supply disturbances from altering the output timing.

🔧

Astable Oscillator and Tone Generation

The MC1455BP1G can generate a repetitive waveform in astable mode using an external resistor-capacitor network and the internal threshold and discharge functions. The onsemi datasheet identifies free-running frequency as externally controlled, making the part applicable to tone generators, clock-like signals, blinking indicators, and periodic test fixtures. Unlike a fixed-frequency oscillator, the timing values can be selected to match the required repetition rate. Because resistor and capacitor tolerance, temperature, and supply variation can affect the waveform, the timing components should be selected with the complete error budget in mind. Confirm the output duty cycle, discharge-device limits, and reset behavior against the manufacturer datasheet for each operating condition.

🖥️

Legacy Through-Hole Timer Board

The MC1455BP1G is a practical choice for maintaining or cloning legacy through-hole timer boards because it is offered in an 8-pin PDIP package and uses the established MC1455 single-timer architecture. The 555-family pin arrangement enables a direct comparison with existing NE555 and NA555 circuits, while the manufacturer datasheet provides the common timing, trigger, reset, and discharge framework. DIP construction simplifies socket use, probe access, and hand rework compared with a surface-mount timer. However, existing boards must still be checked for exact pin functions, voltage limits, output-current requirements, and any nonstandard wiring. Review the schematic and manufacturer data before assigning the alternative, and preserve adequate clearance around the package for soldering and inspection.

💡

Indicator Flashing and Periodic Triggering

A free-running MC1455BP1G can produce the periodic trigger required by a flashing indicator or repetitive actuator. The external timing network sets the oscillation rate, and the device output can drive a suitable interface stage rather than directly carrying an excessive lamp or relay load. This approach separates timing generation from the load-driving circuit, allowing the indicator flash rate to remain stable while transistor, MOSFET, or driver selection handles current. The -40°C to +85°C rated range is useful for industrial enclosures where temperature varies. Confirm output-current capability, timing tolerance, and reset behavior in the manufacturer datasheet, and include a current-limiting path appropriate for the indicator technology.

📺

Test and Measurement Pulse Source

The MC1455BP1G can serve as a simple adjustable pulse source in test and measurement equipment because the timing interval is set by one external resistor and one capacitor. Astable operation supports recurring pulses, while monostable operation produces a single interval after triggering, allowing the same architecture to address repetitive and one-shot test needs. The single-chip implementation reduces component count, and the 8-pin PDIP package is convenient for prototypes and educational fixtures. For laboratory-grade timing accuracy, evaluate capacitor and resistor tolerance, temperature drift, supply noise, and the measurement bandwidth of the output. Use the manufacturer datasheet to establish output rise and fall behavior and to avoid loading the timing node during investigation.

🧩

Educational Electronics Timing Circuit

The MC1455BP1G is well suited to educational timer demonstrations because its 555 operation can be examined through astable oscillation, monostable delay, trigger, reset, and discharge behavior. Students can vary one timing resistor or capacitor to observe changes in repetition rate or pulse duration, while the 8-pin PDIP format provides clear physical access to every terminal. The 5 V and 15 V supply options also allow comparison between two common operating conditions. A breadboard or solderless training board is suitable for initial work, but the timing capacitor should have a known tolerance and the supply should be properly regulated. The manufacturer datasheet should accompany the exercise so that output states, trigger behavior, and reset requirements are interpreted correctly.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

MC1455BP1 Related MC1455-family single timer ব্যবহৃত হয়: Industrial Pulse and Delay Control, Legacy Through-Hole Timer Board, Test and Measurement Pulse Source, Educational Electronics Timing Circuit MC1455P1G onsemi ব্যবহৃত হয়: Industrial Pulse and Delay Control, Legacy Through-Hole Timer Board, Indicator Flashing and Periodic Triggering, Test and Measurement Pulse Source, Educational Electronics Timing Circuit NE555N Single timer candidate for legacy 555 circuits ব্যবহৃত হয়: Industrial Pulse and Delay Control, Legacy Through-Hole Timer Board, Test and Measurement Pulse Source NE555P Texas Instruments ব্যবহৃত হয়: Astable Oscillator and Tone Generation, Indicator Flashing and Periodic Triggering, Educational Electronics Timing Circuit NA555P Precision single timer alternative for timing evaluation ব্যবহৃত হয়: Astable Oscillator and Tone Generation, Indicator Flashing and Periodic Triggering MC1455BP1G onsemi ব্যবহৃত হয়: Astable Oscillator and Tone Generation
What is the onsemi MC1455BP1G?
The onsemi MC1455BP1G is a single 555-type monolithic timer and oscillator in an 8-pin PDIP package. According to the manufacturer datasheet, it produces precise time delays or oscillation and includes terminals for triggering and resetting when required. The circuit is designed for 5 V or 15 V operation and uses one external resistor and capacitor to establish the timing interval in monostable mode or the oscillation period in astable mode.
What supply voltage does the MC1455BP1G use?
The MC1455BP1G is specified for 5 V and 15 V supply operation. These are the two principal supply conditions identified for the device, while its operating-temperature range is -40°C to +85°C. The onsemi datasheet should be used when determining detailed voltage limits, output drive capability, or behavior at supply values not explicitly characterized.
What are the key specifications of MC1455BP1G that engineers should know?
The MC1455BP1G is an 8-pin PDIP timer rated for 5 V or 15 V supplies and -40°C to +85°C operation. It is a single 555-type circuit supporting monostable and astable modes, with one external resistor and capacitor used for timing. Additional trigger and reset terminals provide external state control, while the tube packaging and through-hole construction suit prototype, repair, and legacy PCB work.
How do I use the MC1455BP1G as a monostable timer?
Use the MC1455BP1G in monostable mode by applying one trigger transition and allowing the output to generate a single timed pulse. The manufacturer states that the delay is precisely controlled by one external resistor and capacitor. Select the timing values for the required pulse duration, account for capacitor and resistor tolerances, and verify the trigger, reset, and discharge behavior against the onsemi datasheet before finalizing the circuit.
How do I use the MC1455BP1G as an astable oscillator?
The MC1455BP1G can operate as a free-running oscillator in astable mode, where the output repeatedly charges and discharges an external capacitor through a timing resistor. The manufacturer describes the free-running frequency as being controlled by external timing components. Choose resistor and capacitor values carefully because their tolerance affects frequency, and confirm the resulting duty cycle and output waveform against the datasheet.
Where can I download the MC1455BP1G datasheet PDF?
The official MC1455BP1G datasheet PDF is available from onsemi at https://www.onsemi.com/pdf/datasheet/mc1455-d.pdf. It covers the MC1455, MC1455B, and NCV1455B timer families, including monostable and astable operation. Use the manufacturer document for pin descriptions, electrical limits, timing equations, and application-circuit details before laying out a PCB.
Where is the MC1455BP1G pinout located?
The MC1455BP1G pinout is shown in the onsemi MC1455 family datasheet at https://www.onsemi.com/pdf/datasheet/mc1455-d.pdf. The device uses an 8-pin PDIP package, but the exact numbered terminal assignments should be taken directly from the manufacturer pin-description diagram. Use that diagram when assigning supply, timing, trigger, reset, discharge, and output connections.
Can the MC1455BP1G be used in industrial equipment?
The MC1455BP1G is specified over -40°C to +85°C, making its operating-temperature range suitable for many industrial applications. The onsemi family is also described as a highly stable controller for accurate delays or oscillation. For equipment requiring formal automotive qualification or a specific industrial certification, verify the relevant qualification statement separately because it is not established by the temperature range alone.
Where can I buy MC1455BP1G online?
Use the Request a Quote form on this page to request MC1455BP1G availability, current pricing, and quantity breaks. The exact MPN is listed in an 8-pin PDIP tube package, and current channel listings identify it as a 555-type single timer and oscillator. Submit the required quantity and target ship-to information so the quotation can reflect the appropriate sourcing terms.
What is the lead time for MC1455BP1G?
The current production and delivery lead time for MC1455BP1G should be confirmed through the Request a Quote form on this page. The device is an active catalog item listed in an 8-pin PDIP tube package, but a listing alone does not establish a guaranteed delivery interval. Include your required quantity and scheduled assembly date when requesting the quotation.
Is MC1455BP1G in stock?
Current MC1455BP1G inventory should be checked through the Request a Quote form on this page. Distributor listings identify the exact 8-pin PDIP tube part, but stock levels can change with order quantity and fulfillment location. Request a quotation for the quantity and package configuration needed for your production build to obtain an allocation and delivery commitment.
What is the difference between MC1455BP1G and MC1455P1G?
MC1455BP1G and MC1455P1G are closely related onsemi timer catalog entries in the same MC1455 family, but the G and P ordering-code details should be checked against the manufacturer ordering table before substitution. Both are described through the same 555-family datasheet, while the exact MPN listing must be matched when confirming package, temperature grade, and lifecycle status. Do not infer interchangeability from the family name alone.
MC1455BP1G vs NE555N - which is better for a 555 timer circuit?
MC1455BP1G is preferable when the design specifically requires the onsemi MC1455 family and an 8-pin PDIP footprint. NE555N is a distinct manufacturer part, so its pin arrangement, voltage limits, timing accuracy, output behavior, and temperature grade must be checked before it is treated as a direct replacement. Cross-reference information identifies functional similarity, but engineers should verify the actual PCB footprint and every operating limit.
What can replace the MC1455BP1G in an existing 555 circuit?
A valid replacement must use the same 8-pin PDIP footprint, reproduce the required supply-voltage and timing behavior, and provide compatible trigger, reset, discharge, and output connections. MC1455P1G, NE555N, NA555P, and NE555P appear in comparison references, but each should be checked against the exact schematic and manufacturer datasheet before installation. A functional 555 circuit is not automatically a pin-compatible drop-in replacement.
When should I choose MC1455BP1G over another 555 timer?
Choose MC1455BP1G when the design needs an onsemi 555-family timer in an 8-pin PDIP package, operates from a 5 V or 15 V supply, and remains within -40°C to +85°C. It is particularly suitable for monostable delay, astable oscillator, pulse-generation, and legacy through-hole applications. Choose another listed candidate only after confirming its footprint, timing limits, supply constraints, and trigger/reset behavior.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MC1455BP1G — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose MC1455BP1G when the PCB requires an onsemi 555-family timer in an 8-pin PDIP package and the design operates at 5 V or 15 V within -40°C to +85°C. It is a strong fit for monostable delays, astable oscillators, pulse generation, and legacy through-hole maintenance. Select MC1455P1G when its ordering-code details better match the required package or lifecycle configuration. Consider NE555N or NE555P for common 555 circuits after checking supply limits, timing accuracy, trigger and reset levels, and output behavior against the original device. Use NA555P when its precision characteristics are preferable and its exact operating limits match the design. No cross-reference should be installed solely because it is called a 555 timer: the footprint, pin functions, voltage range, output capability, and timing tolerance must all be verified before PCB reuse.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য MC1455P1G NE555N NA555P NE555P
Package 8-pin PDIP 8-pin PDIP 8-pin PDIP 8-pin PDIP 8-pin PDIP
Brand onsemi onsemi onsemi onsemi onsemi
Timer Type 555 Type MC1455-family timer 555 timer Precision Timer 555 timer
Timer Quantity 1 timer 1 timer 1 timer 1 timer 1 timer

মূল পার্থক্যসমূহ

  • Uses the onsemi MC1455 timing architecture rather than a generic cross-reference timer (বনামNE555N)
  • Combines monostable and astable operation with dedicated trigger and reset terminals (বনামNA555P)
  • Exact family ordering option for MC1455-based legacy designs (বনামMC1455P1G)

ডিজাইন নোট

Do not treat the trigger and reset terminals as unused merely because a circuit operates in one timing mode. Their inactive-state levels can affect whether the internal latch starts or remains reset. Before assembly, compare every numbered terminal on the PCB with the manufacturer pin-description diagram, especially on repaired legacy boards where the original device may have been substituted. Confirm that the replacement’s output and discharge functions occupy the same pins.

Place the supply bypass capacitor close to the power and ground pins, and route the return directly to the device ground reference. Keep the timing resistor and capacitor connection compact so the timing node is not exposed to unnecessary noise or capacitance. If the source supply is shared with switching circuitry, check that supply ripple does not corrupt the timing thresholds. The circuit is characterized for 5 V and 15 V supply conditions, so avoid assuming uninterrupted operation at arbitrary intermediate voltages.

Estimated: with a 15 V supply, a 5 V output, and a 100 mA output load, the regulator’s approximate dissipation is 1.0 W using P = (VIN − VOUT) × IOUT. The 8-pin PDIP exposes leads for heat conduction, but actual junction temperature depends on board copper, airflow, package construction, and the manufacturer thermal limits. For sustained higher current, calculate worst-case dissipation at maximum load and verify temperature rise against the applicable package data.

Maintain a conventional through-hole DIP-8 land pattern with adequate spacing for insertion, probe access, and hand soldering. For a socketed design, verify that the socket and the selected timer have compatible lead geometry. Keep sensitive timing nodes away from high-current switching paths and provide adequate copper return paths. The 8-pin PDIP format simplifies rework, but solder bridges between the closely spaced pins can alter timing or cause unintended trigger and reset states.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The component is a single timer IC; formal AEC-Q100 qualification is not established by the commercial MC1455BP1G listing. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or current compliance documentation.

ডেটা যাচাই করা হয়েছে: 2026-11-16 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

MC1455BP1G datasheet MC1455BP1G pinout MC1455BP1G datasheet pdf MC1455BP1G equivalent MC1455BP1G replacement MC1455BP1G cross reference MC1455BP1G vs NE555N MC1455BP1G vs NA555P MC1455BP1G DIP-8 pinout MC1455BP1G price MC1455BP1G stock onsemi MC1455BP1G MC1455BP1G astable oscillator MC1455BP1G monostable timer

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

onsemi MC1455BP1G MC1455BP1 MC1455P1G NE555N NA555P NE555P 555 timer monolithic timer programmable timer oscillator monostable mode astable mode trigger input reset input discharge transistor output latch external resistor external capacitor timing accuracy supply voltage operating temperature 8-pin PDIP DIP package through-hole technology
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন