MC3303DR2 - Quad 3-36V Low-Noise Op Amp | onsemi
MPN: MC3303DR2 ✓ সক্রিয়MC3303DR2 সারাংশ
An operational amplifier is an active analog component that compares two input voltages and amplifies their difference. A quad operational amplifier combines four amplifiers in one integrated circuit, reducing component count and simplifying PCB layout compared with four separate single amplifiers. This MC3303 device belongs to the operational-amplifier hierarchy: quad op amp, instrumentation amplifier stage, analog signal-conditioning IC, and semiconductor.
The MC3303DR2 provides four independent general-purpose amplifier channels, a 3 V to 36 V single-supply operating range, and an 8 mV differential input offset voltage rating. Its low-noise characterization makes it relevant to sensor signals, current-loop interfaces, transducer conditioning, and low-level control paths where the signal must be amplified without adding excessive circuit noise.
Operation from a single supply simplifies power-system design because the amplifier can operate with a positive supply and ground reference without requiring a symmetrical positive and negative rail. Designers must still observe the common-mode input range and output swing limitations of each amplifier channel. Decoupling close to the supply pins helps control supply ripple, while resistor selection and input-bias-current compensation determine practical DC offset behavior.
Typical applications include industrial sensor conditioning, four-channel process monitoring, general-purpose buffer stages, transimpedance front ends, active filtering, audio and communication interfaces, and control-loop amplifiers. Using four channels in one package can also reduce board area, although each channel still requires its own feedback network and output-load assessment.
The principal design consideration is ensuring that signal amplitudes remain within the amplifier's input common-mode range and output voltage swing across the complete 3 V to 36 V supply range. Check the manufacturer datasheet for the exact common-mode range, output-swing limits, input-bias current, slew rate, and stability requirements before finalizing high-gain or capacitive-load layouts.
This product page combines the exact MC3303DR2 identification, package information, electrical characteristics, drop-in alternatives, application guidance, and design checks needed for engineering evaluation. It also distinguishes verified drop-in candidates from options that require a separate pinout, electrical, and qualification review before use in a production design.
এর জন্য ড্রপ-ইন বিকল্প MC3303DR2 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible MC3303DR2 (একই form factor এবং footprint) — পার্থক্য রয়েছে Architecture, Input Type, Package, Product Type.
MC3302DR2G
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
MC3403DR
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়✓ স্টকে আছে
$0.4102 / ইউনিট
ডেটাশিট দেখুন →MC3303D
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়মূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →MC3301DR2G
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
MC3402D
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
MC3303DR2 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Number of Amplifier Circuits | 4 circuits |
| অপারেটিং সাপ্লাই ভোল্টেজ | 3 V to 36 V |
| Differential Input Offset Voltage | 8 mV |
| Product Type | General-purpose operational amplifier |
| Architecture | Quad operational amplifier |
| Supply Type | Single supply |
| প্যাকেজ | 14-pin SOIC |
| মাউন্টিং টাইপ | Surface mount |
| Noise Characteristics | Low noise |
| Input Type | Differential input |
| পিনের সংখ্যা | 14 pins |
MC3303DR2 পিন কনফিগারেশন
| পিন 1 | OUT A — Amplifier A output |
| পিন 2 | IN A- — Amplifier A inverting input |
| পিন 3 | IN A+ — Amplifier A non-inverting input |
| পিন 4 | V- — Negative supply connection |
| পিন 5 | IN B+ — Amplifier B non-inverting input |
| পিন 6 | IN B- — Amplifier B inverting input |
| পিন 7 | OUT B — Amplifier B output |
| পিন 8 | OUT C — Amplifier C output |
| পিন 9 | IN C- — Amplifier C inverting input |
| পিন 10 | IN C+ — Amplifier C non-inverting input |
| পিন 11 | V+ — Positive supply connection |
| পিন 12 | IN D+ — Amplifier D non-inverting input |
| পিন 13 | IN D- — Amplifier D inverting input |
| পিন 14 | OUT D — Amplifier D output |
সাধারণ ব্যবহার
MC3303DR2 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Sensor Signal Conditioning, Low-Level Instrumentation Amplification, Process Control and Monitoring, Active Filtering and Signal Conditioning, Audio and Communication Interfaces, Transducer and Current-Loop Interfaces.
Industrial Sensor Signal Conditioning
The MC3303DR2 fits four-channel industrial sensor conditioning because it combines four general-purpose amplifiers, 3 V to 36 V single-supply operation, low-noise behavior, and an 8 mV differential input offset specification. Each channel can buffer or amplify a transducer output before conversion by an ADC. The wide supply range supports systems operating from compact 3.3 V rails through higher industrial bus-derived supplies. Verify that sensor outputs remain inside the input common-mode range and that the selected gain keeps the amplifier output within its voltage swing. Use short input paths, local supply bypassing, and separate feedback networks for each channel to minimize offset, noise pickup, and channel-to-channel coupling.
সুপারিশকৃত
Low-Level Instrumentation Amplification
The MC3303DR2 is suitable for instrumentation paths where small differential signals must be conditioned before measurement. Its four amplifier channels can implement input buffers, differential stages, active filters, and gain stages while the 8 mV differential input offset specification provides a defined basis for error analysis. The low-noise characterization is valuable when operating near the lower end of the signal range. For precision designs, calculate the offset contribution relative to the smallest expected signal and assess input-bias-current error. Keep input leads short, provide stable reference or feedback resistors, and confirm the complete common-mode and output-swing envelope from the manufacturer datasheet before selecting the operating gain.
সুপারিশকৃত
Process Control and Monitoring
The four integrated amplifiers in the MC3303DR2 can support process-control and monitoring functions such as conditioning several sensor outputs, generating control references, buffering actuator inputs, and amplifying status signals. Single-supply operation from 3 V to 36 V allows the device to share power with both low-voltage sensors and higher-voltage industrial control circuitry when its operating limits are respected. Using four channels in one 14-pin SOIC reduces package count compared with four separate amplifiers. Designers should partition noisy actuator paths from precision measurement channels, establish a low-impedance reference point, and check that each amplifier has adequate output-current capability. Thermal review should account for total supply dissipation across all four active channels at the highest expected ambient temperature.
সুপারিশকৃত
Active Filtering and Signal Conditioning
The MC3303DR2 can implement active filters and general-purpose signal-conditioning networks because it provides four amplifiers in one package. A designer can build precision gain stages, anti-alias filters, smoothing networks, and channel-matching circuits without using four separate ICs. The 3 V to 36 V supply range provides flexibility for mixed-voltage systems, while single-supply operation simplifies common grounding. However, active-filter performance depends on resistor tolerance, amplifier open-loop response, noise, and the exact operating gain. Use matched resistor networks where channel consistency matters, avoid placing high-gain feedback routes beside input traces, and confirm the datasheet bandwidth, slew-rate, and output-capacitance limits before selecting component values.
সুপারিশকৃত
Audio and Communication Interfaces
The MC3303DR2 can provide low-level amplification and buffering in audio, communications, and interface circuits where four general-purpose amplifier channels are useful. Its low-noise characterization helps preserve small signals, and the broad 3 V to 36 V supply range allows use in systems operating at different rail levels. The device may be used for microphone preamplifier stages, line-level buffers, gain-control circuits, and interface signal conditioning. Actual audio suitability depends on the complete frequency response, noise-density curve, slew rate, and output-drive requirements at the operating gain. Use a clean analog ground and ground reference, decouple the supply locally, and verify maximum output swing before driving downstream circuitry. Higher-bandwidth or rail-to-rail applications may require a different amplifier family.
সুপারিশকৃত
Transducer and Current-Loop Interfaces
The MC3303DR2 is appropriate for transducer and current-loop interfaces that require multiple low-level amplifier functions in a compact circuit. The four channels can buffer sensor outputs, amplify small voltage differences, drive an analog-to-digital converter input, and support auxiliary monitoring functions. Single-supply operation simplifies grounding in industrial systems, while the 3 V to 36 V range provides broad input-rail flexibility. The designer must verify that the common-mode voltage of the selected 4-20 mA interface remains within the amplifier's permitted input range and that the output does not exceed the downstream converter's input limits. Feedback-resistor accuracy directly affects transimpedance gain, so use suitable resistor tolerance and keep input-node capacitance low to preserve bandwidth and stability.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MC3303DR2 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | MC3302DR2G | MC3403DR | MC3303D | MC3301DR2G | MC3402D |
|---|---|---|---|---|---|---|
| Brand | onsemi | onsemi | onsemi | onsemi | onsemi | onsemi |
| Package | SOIC-14 | SOIC-14 - same | SOIC-14 - same | SOIC-14 - same | SOIC-14 - same | SOIC-14 - same |
| Amplifier Circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits | 4 circuits |
| General-Purpose Classification | General-purpose amplifier | General-purpose family | General-purpose family | General-purpose family | General-purpose family | General-purpose family |
মূল পার্থক্যসমূহ
- Four general-purpose amplifiers in one package (বনামMC3403DR)
- Wide single-supply operating range (বনামMC3302DR2G)
- Consolidation for multi-channel analog designs (বনামMC3301DR2G)
ডিজাইন নোট
Confirm the actual supply voltage and signal levels before assigning the amplifier inputs and outputs. The MC3303DR2 is specified for 3 V to 36 V operation, but the permitted input common-mode range and output swing are narrower than the full supply range. Place the supply bypass capacitor close to the positive-supply and ground pins, keep the high-frequency return path short, and check the total dissipation of all four channels at the maximum expected load and ambient temperature.
Route each amplifier's inverting input, non-inverting input, and feedback components close to the corresponding IC pins. Avoid routing sensitive inputs beside supply traces, relay contacts, or switching-node conductors. High-gain stages require especially short feedback paths because parasitic capacitance inside the feedback loop can affect stability. Use a continuous ground plane where practical, provide a low-impedance return for bypass capacitors, and separate precision channels from high-current output circuitry.
Do not treat the 8 mV offset rating as a complete precision specification and do not assume that every 3-36 V circuit operation keeps the signal inside the usable input range. Check offset test conditions, input-bias current, common-mode limits, output swing, gain-bandwidth product, slew rate, and stability against the actual circuit. For low-level measurements, calculate the offset error as a percentage of the smallest input and include resistor tolerance and output-loading effects.
কমপ্লায়েন্স তথ্য
A cross-reference comparison listing references RoHS and REACH fields, but the exact MC3303DR2 compliance values were not stated clearly enough to classify them. No AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was confirmed.