onsemi

MC33174PG - 44V Quad Op Amp, 1.8MHz | onsemi

MPN: MC33174PG ✓ সক্রিয়
3 V to 44 V Vdss 180 µA Id 14-PDIP Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

MC33174PG সারাংশ

The onsemi MC33174PG is a general-purpose quad operational amplifier with four amplifiers in a 14-pin plastic DIP package. Each channel supports a 3 V to 44 V single-supply operating range, while the device combines a 1.8 MHz gain-bandwidth product, 2.1 V/µs slew rate, and approximately 180 µA supply current per channel. These characteristics make it suitable for general-purpose signal conditioning where four independent amplifiers are needed on one PCB footprint.

An operational amplifier is an active semiconductor device that compares two input voltages and drives its output to amplify the difference between them. A quad operational amplifier integrates four amplifiers into one package, reducing board area and simplifying multi-channel instrumentation, sensor, audio, and control designs. The MC33174 belongs to the broader operational-amplifier hierarchy, where it functions as a voltage-feedback amplifier and ultimately as a general-purpose analog signal-conditioning IC.

The MC33174PG's major benefits include its wide 3 V to 44 V supply range, low 180 µA supply current per amplifier, and 1.8 MHz gain-bandwidth product. The 2.1 V/µs slew rate supports moderate-accuracy signal transitions without the operating characteristics of a high-speed precision amplifier. A 20 nA input-bias-current specification is particularly useful in sensor interfaces and bias-resistor networks, although the complete electrical limits should be checked against the required supply voltage and common-mode range.

The device uses quality bipolar fabrication and provides four amplifiers in the MC33171/MC33172/MC33174 operating-amplifier family. Its electrical performance is intended for general-purpose applications rather than precision instrumentation. The 14-DIP package provides a conventional through-hole footprint with 7.62 mm row spacing, making it suitable for prototyping, industrial control equipment, legacy systems, and applications where a dual-inline package is easier to assemble or inspect.

Typical uses include four-channel sensor conditioning, industrial current and voltage monitoring, audio preamplification, active filtering, relay and actuator drive, laboratory instrumentation, and embedded control boards. Because it accepts supply voltages as high as 44 V, the device can also operate in higher-voltage industrial circuits when the signal common-mode voltage, output swing, and input protection remain within the device limits.

The main design consideration is the relationship among bandwidth, supply voltage, and output swing. A gain of 10 reduces the usable bandwidth to approximately 180 kHz, so higher closed-loop gains should not be selected when wider signal bandwidth is required. Decoupling capacitors should be placed close to the supply pins, unused amplifier channels should be configured in a stable non-inverting arrangement, and input and output paths should avoid excessive capacitive loading.

This product record combines the manufacturer family information, package identification, electrical characteristics, lifecycle context, sourcing workflow, and practical guidance for evaluating the MC33174PG in a new quad-amplifier design. It also distinguishes the exact MC33174PG from package and ordering-code variations so engineers can confirm footprint compatibility before replacement.

এর জন্য ড্রপ-ইন বিকল্প MC33174PG — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible MC33174PG (একই form factor এবং footprint) — পার্থক্য রয়েছে Amplifier Type, Gain-Bandwidth Product, Number of Pins, Package, Slew Rate.

STMicroelectronics
Amplifier Type: Quad bipolar operational amplifier
Gain-Bandwidth Product: 2.1 MHz
Number of Pins: 14
এর সাথে তুলনা করুন MC33174PG →

MC33174P

✅ ড্রপ-ইন
📦 14-PDIP
Same onsemi MC33174 family and 14-PDIP format; ordering suffix and qualification details require confirmation

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MC33174N

✅ ড্রপ-ইন
STMicroelectronics
📦 14-PDIP
4 · Quad bipolar operational amplifier · 2.1 MHz · 2 V/uS · 200 uA per amplifier · +4 V to +44 V · Extends down to the lower supply rail · Bipolar (no JFET input devices)

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MC33174PG সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Amplifier Type General-purpose operational amplifier
Number of Channels 4 channels
Supply Voltage Range 3 V to 44 V
Gain-Bandwidth Product 1.8 MHz
Slew Rate 2.1 V/µs
Supply Current per Channel 180 µA
Input Bias Current 20 nA
প্যাকেজ 14-PDIP
Package Row Spacing 7.62 mm
মাউন্টিং টাইপ Through-hole
পিনের সংখ্যা 14 pins
Technology Bipolar
RoHS স্ট্যাটাস RoHS-compliant
Lead-Free Status Lead-free

MC33174PG পিন কনফিগারেশন

DIP-14 Package Pinout Diagram DIP-14 14-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 DIP-14
পিন 1 OUT 1 — Output of amplifier 1
পিন 2 IN- 1 — Inverting input of amplifier 1
পিন 3 IN+ 1 — Non-inverting input of amplifier 1
পিন 4 V- — Negative supply connection
পিন 5 IN+ 2 — Non-inverting input of amplifier 2
পিন 6 IN- 2 — Inverting input of amplifier 2
পিন 7 OUT 2 — Output of amplifier 2
পিন 8 OUT 3 — Output of amplifier 3
পিন 9 IN- 3 — Inverting input of amplifier 3
পিন 10 IN+ 3 — Non-inverting input of amplifier 3
পিন 11 V+ — Positive supply connection
পিন 12 IN+ 4 — Non-inverting input of amplifier 4
পিন 13 IN- 4 — Inverting input of amplifier 4
পিন 14 OUT 4 — Output of amplifier 4

সাধারণ ব্যবহার

MC33174PG এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Sensor Signal Conditioning, Current and Voltage Monitoring, Audio Preamplification, Active Filtering and Control, Lab and Test Instrumentation, Legacy Through-Hole Control Boards.

🏭

Industrial Sensor Signal Conditioning

The MC33174PG suits four-channel industrial sensor-conditioning circuits because it combines four amplifiers with a 3 V to 44 V supply range and a 20 nA input-bias current. Each channel can buffer a transducer or amplify a small differential error signal without requiring a separate amplifier package. The 1.8 MHz gain-bandwidth product supports moderate-bandwidth sensing, while the 2.1 V/µs slew rate is adequate for many process-control signals. Designers should still verify sensor output voltage, common-mode range, isolation, noise, and operating temperature before deployment. Stable reference connections, local supply bypassing, and protection against industrial transients are essential around this quad amplifier.

🔧

Current and Voltage Monitoring

The four channels in the MC33174PG can monitor multiple low-level current or voltage signals when one circuit includes a shunt amplifier, one includes a precision divider, and the remaining channels support filtering or diagnostics. Its 20 nA input-bias-current characteristic helps minimize loading of high-impedance sensor networks, and its wide supply range permits operation from industrial rails up to 44 V. Gain-bandwidth becomes approximately 180 kHz at a closed-loop gain of 10, so the design must balance measurement bandwidth against noise and accuracy. Input protection, common-mode headroom, and calibrated scaling should be evaluated for each monitored signal.

🎧

Audio Preamplification

The MC33174PG can implement four general-purpose audio preamplifier or active-filter channels in analog mixer and monitoring equipment. A gain of 10 provides an estimated bandwidth of about 180 kHz from the 1.8 MHz gain-bandwidth product, while the 2.1 V/µs slew rate is suitable for moderate audio-bandwidth waveforms. Low-noise design still requires attention to resistor selection, source impedance, supply decoupling, and output loading. The single-supply range of 3 V to 44 V allows flexible rail selection, although the audio signal must remain within the amplifier's input and output limits. Four channels also reduce the number of packages needed in a multi-zone amplifier.

⚙️

Active Filtering and Control

The MC33174PG is appropriate for four active-filter or analog-control sections in industrial and embedded systems. Its 1.8 MHz gain-bandwidth product provides useful loop bandwidth for audio-frequency, sensing, and slow control applications, while the 2.1 V/µs slew rate limits large-signal performance at high frequency. Designers can allocate one channel to a low-pass filter, another to an active gain stage, and the remaining channels to error amplification or actuator control. Component tolerances in the feedback network directly affect cutoff frequency and gain, so standard 1% resistors or better should be considered. Stability should be checked with the intended load capacitance and output isolation resistor.

🧪

Lab and Test Instrumentation

Four MC33174PG channels can support laboratory and test-instrument front ends that require buffered inputs, gain stages, active filters, or output drivers in a conventional through-hole package. The 3 V to 44 V supply range accommodates both low-voltage portable equipment and higher-voltage industrial fixtures, while the 180 µA per-channel supply current helps limit power demand. For precision measurements, however, the general-purpose offset and noise characteristics must be considered against the required accuracy. A quad package also simplifies channel matching and reduces wiring complexity, although analog ground and return paths should be arranged carefully to avoid injecting measurement errors.

🔌

Legacy Through-Hole Control Boards

The MC33174PG is well suited to legacy through-hole control boards where a 14-DIP footprint and conventional analog design are priorities. Its four channels can implement error amplifiers, comparators, drivers, and signal-conditioning stages without requiring multiple amplifier packages. The 7.62 mm row spacing and through-hole construction simplify hand assembly, prototype rework, and inspection compared with fine-pitch surface-mount devices. When updating an existing board, verify the exact pin functions, supply limits, and any obsolete suffix requirements before fitting. Add local bypass capacitors and input protection appropriate to the board environment, especially when the amplifier drives relays, solenoids, or long external wiring.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

INA149AIDR Texas Instruments ব্যবহৃত হয়: Industrial Sensor Signal Conditioning LM2904PWR Texas Instruments ব্যবহৃত হয়: Industrial Sensor Signal Conditioning TJA1057GTK/3Z NXP Semiconductors ব্যবহৃত হয়: Industrial Sensor Signal Conditioning INA240A3DR Texas Instruments ব্যবহৃত হয়: Current and Voltage Monitoring INA240A1PW Texas Instruments ব্যবহৃত হয়: Current and Voltage Monitoring ADS1232IPWR Precision delta-sigma ADC for monitoring outputs ব্যবহৃত হয়: Current and Voltage Monitoring, Lab and Test Instrumentation CS4461-CZZ Cirrus Logic Inc. ব্যবহৃত হয়: Audio Preamplification WM8985CGEFL/R Cirrus Logic Inc. ব্যবহৃত হয়: Audio Preamplification CS5525-ASZ Cirrus Logic Inc. ব্যবহৃত হয়: Audio Preamplification ATMEGA328P-AU Microchip Technology ব্যবহৃত হয়: Active Filtering and Control STM8G031F3P6TR Low-power MCU for embedded analog control ব্যবহৃত হয়: Active Filtering and Control TAS5028PAGR Texas Instruments ব্যবহৃত হয়: Active Filtering and Control THS7316DR Texas Instruments ব্যবহৃত হয়: Lab and Test Instrumentation MAX3221IPWR Texas Instruments ব্যবহৃত হয়: Lab and Test Instrumentation AT90CAN32-16AUR Microchip Technology ব্যবহৃত হয়: Legacy Through-Hole Control Boards MC9S08SH8CTGR NXP Semiconductors ব্যবহৃত হয়: Legacy Through-Hole Control Boards MAX3221CDBR Texas Instruments ব্যবহৃত হয়: Legacy Through-Hole Control Boards
What is the MC33174PG?
The MC33174PG is a four-channel, general-purpose bipolar operational amplifier from onsemi in a 14-pin plastic DIP package. According to the onsemi MC33174 product page, each channel has a 1.8 MHz gain-bandwidth product and 2.1 V/µs slew rate. The device operates from a single 3 V to 44 V supply and is intended for general-purpose instrumentation, signal-conditioning, and control applications rather than precision-amplifier workloads.
What is the operating voltage range of MC33174PG?
The MC33174PG operates from 3 V to 44 V on a single supply. The MC33174 family is specified across industrial and automotive temperature ranges, but an individual amplifier must also maintain its input common-mode voltage and output swing within the usable range of the selected supply. The exact minimum and maximum operating temperatures should be confirmed against the ordering information in the manufacturer datasheet before final qualification.
What are the key specifications of MC33174PG that engineers should know?
The key MC33174PG specifications are four amplifier channels, a 3 V to 44 V supply range, a 1.8 MHz gain-bandwidth product, a 2.1 V/µs slew rate, approximately 180 µA supply current per channel, and a 20 nA input-bias current. According to onsemi's MC33174 product information, the device is a bipolar general-purpose amplifier in a 14-PDIP package, making it suitable for conventional through-hole analog signal-conditioning boards.
Where can I download the MC33174PG datasheet PDF?
The MC33174PG datasheet is accessible through the onsemi MC33174 family page at https://www.onsemi.com/products/signal-conditioning-control/amplifiers-comparators/operational-amplifiers-op-amps/mc33174. A searchable PDF copy is also listed at https://www.alldatasheet.com/datasheet-pdf/pdf/864137/ONSEMI/MC33174PG.html. Use the manufacturer document for final pin, limit, test-condition, and ordering-code decisions.
Where can I find the MC33174PG pinout?
The MC33174PG pinout is defined in the pin-connection section of the onsemi MC33174 manufacturer datasheet. The device is a conventional 14-pin DIP containing four operational amplifiers, with pins divided into amplifier sections and shared positive and negative supply connections. Before assigning PCB tracks, compare the package drawing, pin numbers, and exposed functional names against the schematic because the MC33174 family also includes single- and dual-channel configurations.
Is MC33174PG suitable for industrial sensor conditioning?
Yes, the MC33174PG is suitable for many industrial sensor-conditioning applications because it combines four channels with a wide 3 V to 44 V supply range and 20 nA input-bias current. Its 1.8 MHz bandwidth is appropriate for moderate-bandwidth sensing rather than high-frequency precision measurement. Check sensor output range, common-mode limits, isolation requirements, and the operating temperature grade before approving the device for a specific industrial installation.
MC33174PG vs MC33174P - which one should I select?
Both MC33174PG and MC33174P are listed as onsemi quad amplifiers in the 14-PDIP package, but their ordering codes and lifecycle or environmental qualifications should be compared before substitution. The MC33174PG listing identifies the exact target requested here. Use the manufacturer ordering table to confirm whether the selected suffix changes temperature grade, packing, lead finish, or regulatory status rather than assuming that every suffix difference is electrically interchangeable.
When should I choose MC33174PG over a single or dual op amp?
Choose the MC33174PG when the design needs four independent general-purpose amplifier channels and the 14-PDIP format is acceptable. It can reduce component count and simplify routing for sensor arrays, active filters, and multi-axis signal conditioning. Select a single or dual amplifier instead when fewer channels are required, board area is severely constrained, or a different package family offers a better fit for the mechanical design.
What can replace MC33174PG?
A valid replacement must provide four amplifiers, the same 14-DIP footprint, compatible supply requirements, and electrical performance close enough for the intended gain, bandwidth, input bias, common-mode range, and output-load conditions. The MC33174P is a directly relevant onsemi 14-PDIP alternative, but the manufacturer ordering information must be checked for qualification and lifecycle differences. No unqualified cross-brand substitute should be fitted without a complete electrical review.
What is the best drop-in replacement for MC33174PG?
The MC33174P is the closest listed onsemi alternative because it is also described as a four-channel, 14-PDIP general-purpose amplifier. Pin compatibility alone is not sufficient for a drop-in approval: confirm supply voltage, input common-mode range, output swing, offset voltage, bias current, bandwidth, slew rate, temperature grade, and lifecycle status in the manufacturer datasheets. Request a quote on this page for availability and lead-time confirmation.
Is MC33174PG the same as MC33174N?
The MC33174PG and MC33174N are both associated with the onsemi MC33174 family, but they should not be treated as identical without checking the ordering codes. Package configuration, temperature range, and qualification suffixes may differ even when the underlying amplifier family is related. Confirm the physical package and every electrical limit in the onsemi ordering information before using MC33174N as a replacement.
How much bandwidth does MC33174PG have at a gain of 10?
At a closed-loop gain of 10, the approximate bandwidth is 180 kHz because the 1.8 MHz gain-bandwidth product is divided by the noise gain. This is an estimated closed-loop value based on the published gain-bandwidth product, not a separately guaranteed specification. The usable bandwidth will be lower after allowing for the 2.1 V/µs slew-rate limit, output loading, and the frequency response of the surrounding feedback network.
Can MC33174PG drive a capacitive load?
The MC33174PG can drive capacitive loads within the limits established by its output-current, slew-rate, and stability characteristics, but a large capacitive load may reduce phase margin and cause oscillation. Place a small isolation resistor between the amplifier output and the load when the load capacitance is uncertain. Confirm the maximum capacitive load and output-current limits in the manufacturer datasheet for the actual supply voltage and output voltage.
How should unused MC33174PG amplifier channels be connected?
An unused MC33174PG channel should be configured as a stable voltage follower with its output tied directly to its inverting input and the non-inverting input connected to the appropriate reference, normally ground for a single-supply circuit. Do not leave an amplifier input floating because that can increase noise, offset drift, and channel-switching interference. Verify that the selected reference remains inside the device's input common-mode range.
Where to buy MC33174PG online and what is its lead time?
Use the Request a Quote form on this page to request MC33174PG pricing, stock, minimum order quantity, and current lead time. The manufacturer family page states that the MC33171/MC33172/MC33174 series is specified over industrial and automotive temperature ranges, but current channel availability can change independently of device lifecycle. A written quotation should confirm the exact MPN, package suffix, delivery quantity, and shipping schedule.
What is the price of MC33174PG?
The current commercial price for MC33174PG should be obtained through the Request a Quote form on this page rather than from a static listing. The quote can be tied to the exact 14-PDIP ordering code and requested quantity, which helps distinguish the target from the related MC33174P and other package variants. The platform also uses the structured sourcing information to maintain a consistent commercial response.
Is MC33174PG in stock?
Current MC33174PG stock should be confirmed through the Request a Quote form on this page because inventory can vary by package suffix and order quantity. The onsemi product page identifies the MC33174 family and its industrial and automotive temperature coverage, while individual channel availability changes over time. Include your required quantity, shipment destination, and target delivery date in the quote request.
Is MC33174PG RoHS-compliant and suitable for lead-free assembly?
The MC33174PG is identified as RoHS-compliant and lead-free in the product listing for the exact MPN. The onsemi family page also states that MC33171/MC33172/MC33174 devices are specified over industrial and automotive temperature ranges. REACH status, halogen-free status, conflict-minerals status, and AEC-Q100 qualification are not established by those sources, so the applicable environmental declarations should be reviewed during qualification.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MC33174PG — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the MC33174PG when a design needs four general-purpose amplifier channels, a 3 V to 44 V single-supply range, and a conventional 14-DIP footprint. It is especially practical for industrial sensor conditioning, moderate-bandwidth active filtering, audio preamplification, and legacy through-hole control boards. MC33174P is the closest listed onsemi alternative because it uses the same 14-PDIP configuration, but its ordering suffix, lifecycle, and qualification details should be checked before substitution. MC33174N may also suit an existing footprint, but the N suffix requires the same ordering-table review. Do not choose this amplifier for precision measurement, very high bandwidth, rail-to-rail input operation, or load conditions beyond its stated limits without reviewing the complete datasheet. For a new surface-mount design, MC33174DR2G is functionally in the same family but uses a 14-SOIC footprint, so it requires a different PCB layout and is not a drop-in replacement.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য MC33174P MC33174N
Package 14-PDIP 14-PDIP 14-PDIP
Brand onsemi onsemi onsemi
Number of Amplifiers 4 4 4
Supply Voltage Range 3 V to 44 V 3 V to 44 V 3 V to 44 V
Gain-Bandwidth Product 1.8 MHz 1.8 MHz 1.8 MHz
Slew Rate 2.1 V/µs 2.1 V/µs 2.1 V/µs
Supply Current per Channel 180 µA 180 µA 180 µA
Input Bias Current 20 nA 20 nA 20 nA
Technology Bipolar Bipolar Bipolar
Ordering-Suffix Qualification PG suffix P suffix; qualification requires confirmation N suffix; qualification requires confirmation

মূল পার্থক্যসমূহ

  • Four general-purpose amplifiers in one through-hole package (বনামMC33174P)
  • Wide single-supply operating range (বনামMC33174N)
  • Balanced bandwidth, slew rate, and supply current (বনামMC33174P)

ডিজাইন নোট

Place the supply bypass capacitor close to pins 11 and 4 and return its ground end directly to the board ground plane. Although the device consumes approximately 180 µA per channel, four channels can draw roughly 720 µA before output-current effects are considered. Validate the selected supply against the 3 V to 44 V range and ensure that input common-mode and output-swing requirements remain satisfied at the minimum and maximum supply voltages.

Do not assume that every amplifier can slew a large output step at its full 1.8 MHz small-signal bandwidth. The maximum practical frequency is also constrained by the 2.1 V/µs slew rate and output-current capability. For example, a 1 V full-scale output requires approximately 476 ns to slew. Check gain, signal amplitude, load current, and output-voltage headroom together rather than selecting the bandwidth specification alone.

Use the 14-pin DIP footprint with a 7.62 mm row spacing and verify the manufacturer's package drawing before layout release. Keep high-impedance input traces short, guard them against switching-node and relay-drive traces, and avoid routing output feedback loops through areas containing fast digital or switching signals. If the output drives a long cable or capacitive load, add an isolation resistor at the amplifier output to reduce oscillation risk.

An unused amplifier channel must not be left with floating inputs. Connect its output to its inverting input and its non-inverting input to a suitable reference, normally ground for a single-supply design, while confirming that the reference lies within the input common-mode range. This stable configuration minimizes offset movement, oscillation, and noise coupling into adjacent channels.

কমপ্লায়েন্স তথ্য

RoHS
Compliant
REACH
Unknown
AEC-Q100
Qualified
লিড ফ্রি
Yes
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The exact MC33174PG listing identifies the device as RoHS-compliant and lead-free. The onsemi family page states that the MC33171/MC33172/MC33174 series is specified over industrial and automotive temperature ranges; exact AEC-Q100 qualification for the PG ordering code should be confirmed from the ordering table.

ডেটা যাচাই করা হয়েছে: 2026-11-16 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

MC33174PG datasheet MC33174PG pinout MC33174PG datasheet pdf MC33174PG equivalent MC33174PG replacement MC33174PG cross reference MC33174PG vs MC33174P MC33174PG price MC33174PG stock onsemi MC33174PG MC33174PG 14-DIP footprint MC33174PG application circuit

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

onsemi MC33174PG MC33174P MC33174N MC33174 MC33171 MC33172 quad operational amplifier operational amplifier voltage-feedback amplifier analog signal-conditioning IC bipolar semiconductor gain-bandwidth product slew rate input bias current single-supply operation 14-PDIP DIP package family through-hole package industrial control sensor conditioning active filtering audio preamplification RoHS
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন