onsemi

MC34071DG - 4.5MHz, 13V/us Single Op Amp | onsemi

MPN: MC34071DG ✗ জীবনকালের সমাপ্তি
3.0 V to 44 V Vdss 100 nA Id 8-SOIC (0.154 in, 3.90 mm width) Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

MC34071DG সারাংশ

onsemi MC34071DG is a single general-purpose operational amplifier with a 4.5 MHz gain-bandwidth product, 13 V/us slew rate, and single-supply operation from 3.0 V to 44 V. The device is manufactured in bipolar technology and is packaged in an 8-pin SOIC.

An operational amplifier is an active analog component that uses high-gain feedback to amplify voltage differences between its input terminals. The MC34071 family combines wide supply-voltage tolerance, high bandwidth, and fast slew rate in a general-purpose amplifier, making it suitable for signal conditioning, instrumentation, filtering, and feedback-control circuits. Its common-mode input range includes ground potential, allowing practical operation from a single positive supply.

Key specifications include 4.5 MHz gain-bandwidth product, 13 V/us slew rate, fast settling time, and bipolar fabrication without JFET input devices. The single amplifier supports both split-supply and single-supply configurations, while its input common-mode capability makes it useful in systems where signals remain close to the negative supply rail.

The MC34071 is designed for applications requiring higher speed than conventional general-purpose amplifiers. Its 4.5 MHz bandwidth supports moderate-frequency signal paths, and the 13 V/us slew rate provides faster large-signal response than many standard precision amplifiers. The bipolar process also provides a conventional input-bias-current characteristic of approximately 100 nA for the listed device family.

Typical applications include low-level signal amplification, active filters, sensor conditioning, audio preamplifier stages, and general feedback amplifiers. The device can also serve in industrial control and instrumentation circuits where a single supply and operation near ground are important. Split-supply operation remains possible when the circuit requires a bipolar output range.

When designing around the MC34071DG, check input and output voltage limits against the selected supply, including the effects of transient overshoot. Keep feedback compensation values consistent with the closed-loop gain, and place input and output components close to the device pins. Verify the final design for stability across the intended gain, temperature, and load range.

This page consolidates the manufacturer product information, distributor availability references, cross-reference candidates, and application guidance for engineers evaluating the MC34071DG. It highlights the electrical envelope, package details, replacement considerations, and practical design decisions needed to determine whether this single-supply bipolar amplifier fits a new or existing circuit.

এর জন্য ড্রপ-ইন বিকল্প MC34071DG — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible MC34071DG (একই form factor এবং footprint) — পার্থক্য রয়েছে Input Transistor Technology, Package, Slew Rate.

onsemi
Input Transistor Technology: Non-JFET
Package: 8-pin SOIC
Slew Rate: 13 V/µs
এর সাথে তুলনা করুন MC34071DG →

MC34071DR2G

✅ ড্রপ-ইন
📦 8-SOIC
Same MC34071 series and 8-SOIC footprint; MC34071DR2G has the same 4.5 MHz gain-bandwidth product, 13 V/us slew rate, and 100 nA input bias current

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MC33071DR2G

✅ ড্রপ-ইন
📦 8-SOIC
Same 8-SOIC single-op-amp format and related family, but the MC33071 series has a lower supply-voltage rating than the MC34071 series

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MC34071DG সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Amplifier Type General Purpose
Number of Circuits 1
আউটপুট টাইপ Single-Ended
Supply Voltage Range, Single Supply 3.0 V to 44 V
Total Supply Voltage Range 3.0 V to 44 V
Gain Bandwidth Product 4.5 MHz
Slew Rate 13 V/us
Input Bias Current 100 nA
Input Transistor Technology Bipolar
Common-Mode Input Range Includes ground potential
Supply Configuration Single or split supply
প্যাকেজ 8-SOIC (0.154 in, 3.90 mm width)
মাউন্টিং টাইপ Surface Mount
RoHS স্ট্যাটাস Compliant
লাইফসাইকেল স্ট্যাটাস Obsolete

MC34071DG 8-soic (0.154 in, 3.90 mm width) পিন কনফিগারেশন গাইড

MC34071DG (8-soic (0.154 in, 3.90 mm width) প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।

MC34071DG-এর জন্য 8-soic (0.154 in, 3.90 mm width) প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MC34071DG.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

MC34071DG এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Single-Supply Sensor Signal Conditioning, Active Filtering and Audio Preamp, Industrial Feedback Control, General-Purpose Instrumentation, Single-Rail ADC Driver, Portable and Battery-Powered Measurement.

🏭

Single-Supply Sensor Signal Conditioning

The MC34071DG fits low-level sensor front ends that operate from a single positive rail. Its common-mode input range includes ground potential, so signals centered near 0 V can be amplified without a negative supply. The 4.5 MHz gain-bandwidth product provides more bandwidth than slow general-purpose amplifiers, while the 13 V/us slew rate improves large-signal response. Use the device in a non-inverting or inverting conditioning stage with feedback resistors selected for the sensor impedance and required gain.

🎧

Active Filtering and Audio Preamp

The MC34071DG can amplify audio and control signals in an active-filter or preamplifier stage. Its 4.5 MHz gain-bandwidth product supports moderate-bandwidth filtering, and the 13 V/us slew rate reduces slew-related distortion during larger output transitions. Single-supply operation simplifies portable and battery-powered designs because the input range reaches ground potential. Select feedback and compensation networks for the closed-loop gain, and check the output swing against the speaker or load requirements.

⚡

Industrial Feedback Control

Use the MC34071DG in industrial feedback-control loops where a 3.0 V to 44 V single-supply range is useful. The device provides a 4.5 MHz gain-bandwidth product and 13 V/us slew rate for responsive control amplification, while its ground-referenced input capability accommodates signals produced by sensors or transducers near the lower rail. Verify the operating-temperature range, loop stability, output load, and transient response before using the amplifier in a production control board.

📊

General-Purpose Instrumentation

The MC34071DG is suitable for instrumentation amplifiers, buffer stages, and general voltage-gain blocks that need more speed than a conventional unity-gain-stable general-purpose amplifier. The 4.5 MHz gain-bandwidth product allows useful closed-loop bandwidth at lower gains, and the 13 V/us slew rate supports faster edge rates. Account for the approximately 100 nA input bias current in high-impedance circuits and use guarding or shielding when long source leads are unavoidable.

🖥️

Single-Rail ADC Driver

The MC34071DG can provide a single-rail drive stage for a moderately fast ADC input or other sampling system. Its 4.5 MHz gain-bandwidth product is suitable for moderate sampling rates, while the 13 V/us slew rate helps produce clean transitions into the following stage. Ground-referenced input capability allows the amplifier to sit directly in a unipolar signal chain. Confirm the ADC settling requirements, output settling time, capacitive loading, and allowable output-voltage swing before finalizing the design.

📱

Portable and Battery-Powered Measurement

The MC34071DG is appropriate for portable measurement circuits where a single positive supply is preferred. The 3.0 V lower supply limit supports low-voltage systems, and the common-mode input range includes ground potential for sensors that produce signals near the lower rail. The 4.5 MHz gain-bandwidth product is adequate for moderate-frequency measurement paths. Check the supply current at the operating voltage, confirm the device's temperature rating, and include protection against input transients when connecting external cables.

What is the operating voltage of MC34071DG?
The MC34071DG operates from 3.0 V to 44 V on a single supply and also supports split-supply operation. According to the onsemi MC34071 product page, the device is a monolithic single operational amplifier designed for both single- and dual-supply systems. Its input common-mode range includes ground potential, which makes it especially useful when the signal remains near the lower supply rail.
What are the key specifications of MC34071DG?
The MC34071DG provides a 4.5 MHz gain-bandwidth product, 13 V/us slew rate, and bipolar input circuitry in an 8-SOIC package. These specifications distinguish it from slower general-purpose op amps and make it suitable for moderate-frequency filtering, signal conditioning, and feedback-control circuits. The single amplifier is also designed for operation from a 3.0 V to 44 V single supply.
Is MC34071DG suitable for single-supply operation?
Yes. The MC34071DG is particularly suited to single-supply operation because its common-mode input voltage range includes ground potential. This allows a circuit to process signals referenced close to the negative supply without requiring a negative rail. The onsemi product information identifies the part as a single general-purpose operational amplifier with a 3.0 V to 44 V single-supply range.
Can MC34071DG operate from split supplies?
Yes. The MC34071 family can operate from split supplies as well as a single positive supply. Its wide supply capability and common-mode range allow conventional dual-rail signal-chain designs, while the ground-referenced input range remains useful in single-rail systems. The device is described by onsemi as a monolithic operational amplifier intended for general-purpose instrumentation and signal-conditioning applications.
What is the gain-bandwidth product of MC34071DG?
The MC34071DG has a gain-bandwidth product of 4.5 MHz. This figure indicates the approximate bandwidth available at unity gain and helps determine the usable frequency range for a closed-loop amplifier configuration. The onsemi MC34071 product page lists 4.5 MHz gain bandwidth and 13 V/us slew rate as the principal high-speed performance parameters.
How fast is the slew rate of MC34071DG?
The MC34071DG has a slew rate of 13 V/us. The onsemi product page describes this as fast settling performance without requiring JFET device technology. Slew rate matters when the amplifier must produce large output-voltage transitions, so the 13 V/us value is useful for estimating rise and fall behavior in gain and filtering circuits.
Where can I download the MC34071DG datasheet PDF?
The MC34071DG datasheet is available through the onsemi MC34071 product page, which links to the device documentation. The verified datasheet listing identifies the part as a single-supply 3.0 V to 44 V operational amplifier in the MC34071 series. Use the manufacturer documentation for the complete pin description, recommended operating conditions, electrical characteristics, and application guidance.
Where is the MC34071DG pinout located?
The MC34071DG pinout should be taken from the pin-description table in the onsemi MC34071 datasheet. The verified package information identifies the device as an 8-SOIC, and the package diagram confirms the eight-lead surface-mount format. Assign PCB tracks only from the manufacturer pin table so that power, input, output, and compensation connections are matched exactly.
What is the best drop-in replacement for MC34071DG?
MC34071DR2G is the closest listed replacement because it uses the same onsemi MC34071 series, the same single general-purpose amplifier configuration, and the same 8-SOIC package. It also lists the same 13 V/us slew rate, 4.5 MHz gain-bandwidth product, and 100 nA input bias current. MC33071DR2G is a related option with a lower-voltage bias, but confirm the supply rating and operating conditions before substitution.
Can MC33071DR2G replace MC34071DG?
MC33071DR2G is a related onsemi single-amplifier option in an 8-SOIC package, but it is not a direct functional replacement without checking its lower supply-voltage rating. The MC34071DG supports a 3.0 V to 44 V single-supply range, while the MC33071 series belongs to the lower-voltage portion of the family. Confirm the required maximum supply voltage and operating temperature before using it.
When should I choose MC34071DG over MC34071DR2G?
Choose MC34071DG when the original specification calls for the onsemi MC34071 series in an 8-SOIC package, while MC34071DR2G should be selected when the distributor order code or packaging arrangement matches the DR2G designation better. Electrically, the two entries share the same 4.5 MHz gain-bandwidth product, 13 V/us slew rate, single-supply operation, and 8-SOIC format.
Is MC34071DG suitable for audio preamplifier applications?
Yes. The MC34071DG can be used in audio preamplifier and general signal-conditioning circuits because it offers a 4.5 MHz gain-bandwidth product and 13 V/us slew rate. Its single-supply capability and common-mode range including ground are helpful in portable or battery-powered designs. Choose the external feedback and compensation network for the intended closed-loop gain and verify output swing at the selected load.
What should I check when designing with the MC34071DG?
Check the supply voltage, input common-mode range, output swing, stability, and required closed-loop gain before finalizing the circuit. Place input and output components close to the package pins, keep feedback traces short, and verify the design over temperature and load. Because the MC34071DG is a bipolar amplifier, input bias current should also be considered in high-impedance source designs.
Can I buy MC34071DG online through this page?
The current commercial status and fulfillment route can be requested through the Request a Quote form on this page. Because the MC34071DG is listed as obsolete, availability may depend on remaining inventory and the required package or delivery format. The form is the appropriate place to request current unit pricing, minimum order quantity, stock confirmation, and lead time.
What is the lead time for MC34071DG?
Lead time depends on the remaining inventory and the package or delivery format required by the order. The MC34071DG is listed as obsolete, so current availability should be confirmed rather than assumed. Request the current lead time, stock status, and minimum order quantity through the Request a Quote form on this page.
What is the difference between MC34071DG and MC34071DR2G?
The MC34071DG and MC34071DR2G are both listed as onsemi single general-purpose amplifiers in 8-SOIC packages with 4.5 MHz gain-bandwidth product and 13 V/us slew rate. The distinction is primarily the order and packaging code. Confirm the exact manufacturer ordering information and delivery format before substituting one for the other.
Is the MC34071DG RoHS compliant?
The MC34071DG is listed as RoHS compliant in the verified distributor product information. The onsemi family documentation also identifies the MC34071 series as a monolithic bipolar operational-amplifier family. For environmental or procurement documentation, request the current manufacturer declaration and handling information through the Request a Quote form on this page.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MC34071DG — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose MC34071DG when the design needs a single general-purpose op amp with a 3.0 V to 44 V single-supply range, 4.5 MHz gain-bandwidth product, and 13 V/us slew rate. It is a strong fit for unipolar sensor-conditioning, active-filter, audio-preamp, and moderate-speed instrumentation circuits because its input range reaches ground. Choose MC34071DR2G when the order code or delivery format better matches that manufacturer designation; the listed electrical characteristics and 8-SOIC package are the same. Consider MC33071DR2G only when its lower-voltage family rating is acceptable for the actual supply. Because MC34071DG is obsolete, confirm lifecycle availability, pin assignments, temperature limits, and RoHS documentation for the exact ordering code before committing to a new production design.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য MC34071DR2G MC33071DR2G
Package 8-SOIC 8-SOIC 8-SOIC
Brand onsemi onsemi onsemi
Number of Circuits 1 1 1
Amplifier Type General Purpose General Purpose General Purpose
Slew Rate 13 V/us 13 V/us 13 V/us
Input Transistor Technology Bipolar Bipolar Bipolar fabrication

মূল পার্থক্যসমূহ

  • Higher-voltage single-supply capability (বনামMC33071DR2G)
  • Identical key dynamic specifications in the closest listed replacement (বনামMC34071DR2G)
  • Ground-referenced input operation (বনামMC33071DR2G)

ডিজাইন নোট

Design the supply rail around the 3.0 V to 44 V single-supply capability, while also checking the exact maximum supply voltage and input/output limits in the onsemi MC34071 datasheet. The amplifier's ground-referenced input range makes single-rail operation practical, but bypass capacitors should still be placed close to the supply pins. For long external cables, add protection against transients before the amplifier input.

Do not select MC33071DR2G solely because it uses the same 8-SOIC footprint. The MC33071 series has a lower-voltage bias, while MC34071DG supports the 3.0 V to 44 V range. Confirm the supply rating, temperature range, and pin-level requirements of the exact ordering code before treating either related part as a replacement.

Keep the feedback network and input traces compact, and place decoupling capacitors close to the package supply and ground pins. For high-impedance sources, minimize leakage on the input node and consider guarding because the listed input bias current is approximately 100 nA. Use the manufacturer pin-description table when assigning the eight SOIC connections.

The 4.5 MHz gain-bandwidth product and 13 V/us slew rate make the MC34071DG faster than many general-purpose amplifiers, but closed-loop stability still depends on gain, load, and compensation. Simulate the complete feedback network, check capacitive loading at the output, and verify settling against any downstream ADC or sampling requirement.

কমপ্লায়েন্স তথ্য

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

RoHS compliance is listed for the MC34071DG. The available product information does not establish the REACH, lead-free, halogen-free, or conflict-minerals status for this exact ordering code. The device is an obsolete general-purpose operational amplifier rather than an automotive-qualified product.

ডেটা যাচাই করা হয়েছে: 2026-11-16 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

MC34071DG datasheet MC34071DG datasheet pdf MC34071DG pinout onsemi MC34071DG MC34071DG replacement MC34071DG equivalent MC34071DG cross reference MC34071DG price MC34071DG stock MC34071DG SOIC-8 op amp MC34071DG 44V operational amplifier MC34071DG 4.5MHz 13V/us MC34071DG vs MC34071DR2G MC34071DG single supply application circuit MC34071DG obsolete amplifier alternative

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

onsemi MC34071DG MC34071DR2G MC33071DR2G operational amplifier general-purpose amplifier single-ended amplifier bipolar operational amplifier single-supply operation split-supply operation gain-bandwidth product slew rate common-mode input voltage range input bias current active filter signal conditioning audio preamplifier industrial feedback control SOIC-8 surface-mount package RoHS obsolete component MC34071 series
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন