MC34071DG - 4.5MHz, 13V/us Single Op Amp | onsemi
MPN: MC34071DG ✗ Son Kullanım ZamanıMC34071DG Genel Bakış
An operational amplifier is an active analog component that uses high-gain feedback to amplify voltage differences between its input terminals. The MC34071 family combines wide supply-voltage tolerance, high bandwidth, and fast slew rate in a general-purpose amplifier, making it suitable for signal conditioning, instrumentation, filtering, and feedback-control circuits. Its common-mode input range includes ground potential, allowing practical operation from a single positive supply.
Key specifications include 4.5 MHz gain-bandwidth product, 13 V/us slew rate, fast settling time, and bipolar fabrication without JFET input devices. The single amplifier supports both split-supply and single-supply configurations, while its input common-mode capability makes it useful in systems where signals remain close to the negative supply rail.
The MC34071 is designed for applications requiring higher speed than conventional general-purpose amplifiers. Its 4.5 MHz bandwidth supports moderate-frequency signal paths, and the 13 V/us slew rate provides faster large-signal response than many standard precision amplifiers. The bipolar process also provides a conventional input-bias-current characteristic of approximately 100 nA for the listed device family.
Typical applications include low-level signal amplification, active filters, sensor conditioning, audio preamplifier stages, and general feedback amplifiers. The device can also serve in industrial control and instrumentation circuits where a single supply and operation near ground are important. Split-supply operation remains possible when the circuit requires a bipolar output range.
When designing around the MC34071DG, check input and output voltage limits against the selected supply, including the effects of transient overshoot. Keep feedback compensation values consistent with the closed-loop gain, and place input and output components close to the device pins. Verify the final design for stability across the intended gain, temperature, and load range.
This page consolidates the manufacturer product information, distributor availability references, cross-reference candidates, and application guidance for engineers evaluating the MC34071DG. It highlights the electrical envelope, package details, replacement considerations, and practical design decisions needed to determine whether this single-supply bipolar amplifier fits a new or existing circuit.
Drop-in alternatifler için MC34071DG — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller MC34071DG (aynı form faktörü ve ayağa oturma) — farklı olan Input Transistor Technology, Package, Slew Rate.
MC34071DR2G
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
MC33071DR2G
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
MC34071DG Maksimum Değerlendirmeler & Elektriksel Özellikler
| Amplifier Type | General Purpose |
| Number of Circuits | 1 |
| Çıkış Türü | Single-Ended |
| Supply Voltage Range, Single Supply | 3.0 V to 44 V |
| Total Supply Voltage Range | 3.0 V to 44 V |
| Gain Bandwidth Product | 4.5 MHz |
| Slew Rate | 13 V/us |
| Input Bias Current | 100 nA |
| Input Transistor Technology | Bipolar |
| Common-Mode Input Range | Includes ground potential |
| Supply Configuration | Single or split supply |
| Paket | 8-SOIC (0.154 in, 3.90 mm width) |
| Montaj Türü | Surface Mount |
| RoHS Durumu | Compliant |
| Yaşam Döngüsü Durumu | Obsolete |
MC34071DG 8-soic (0.154 in, 3.90 mm width) Pin Yapısı Kılavuzu
MC34071DG (8-soic (0.154 in, 3.90 mm width) paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: MC34071DG.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
MC34071DG için uygundur 6 uygulamas: Single-Supply Sensor Signal Conditioning, Active Filtering and Audio Preamp, Industrial Feedback Control, General-Purpose Instrumentation, Single-Rail ADC Driver, Portable and Battery-Powered Measurement.
Single-Supply Sensor Signal Conditioning
The MC34071DG fits low-level sensor front ends that operate from a single positive rail. Its common-mode input range includes ground potential, so signals centered near 0 V can be amplified without a negative supply. The 4.5 MHz gain-bandwidth product provides more bandwidth than slow general-purpose amplifiers, while the 13 V/us slew rate improves large-signal response. Use the device in a non-inverting or inverting conditioning stage with feedback resistors selected for the sensor impedance and required gain.
Önerilen
Active Filtering and Audio Preamp
The MC34071DG can amplify audio and control signals in an active-filter or preamplifier stage. Its 4.5 MHz gain-bandwidth product supports moderate-bandwidth filtering, and the 13 V/us slew rate reduces slew-related distortion during larger output transitions. Single-supply operation simplifies portable and battery-powered designs because the input range reaches ground potential. Select feedback and compensation networks for the closed-loop gain, and check the output swing against the speaker or load requirements.
Önerilen
Industrial Feedback Control
Use the MC34071DG in industrial feedback-control loops where a 3.0 V to 44 V single-supply range is useful. The device provides a 4.5 MHz gain-bandwidth product and 13 V/us slew rate for responsive control amplification, while its ground-referenced input capability accommodates signals produced by sensors or transducers near the lower rail. Verify the operating-temperature range, loop stability, output load, and transient response before using the amplifier in a production control board.
Önerilen
General-Purpose Instrumentation
The MC34071DG is suitable for instrumentation amplifiers, buffer stages, and general voltage-gain blocks that need more speed than a conventional unity-gain-stable general-purpose amplifier. The 4.5 MHz gain-bandwidth product allows useful closed-loop bandwidth at lower gains, and the 13 V/us slew rate supports faster edge rates. Account for the approximately 100 nA input bias current in high-impedance circuits and use guarding or shielding when long source leads are unavoidable.
Önerilen
Single-Rail ADC Driver
The MC34071DG can provide a single-rail drive stage for a moderately fast ADC input or other sampling system. Its 4.5 MHz gain-bandwidth product is suitable for moderate sampling rates, while the 13 V/us slew rate helps produce clean transitions into the following stage. Ground-referenced input capability allows the amplifier to sit directly in a unipolar signal chain. Confirm the ADC settling requirements, output settling time, capacitive loading, and allowable output-voltage swing before finalizing the design.
Önerilen
Portable and Battery-Powered Measurement
The MC34071DG is appropriate for portable measurement circuits where a single positive supply is preferred. The 3.0 V lower supply limit supports low-voltage systems, and the common-mode input range includes ground potential for sensors that produce signals near the lower rail. The 4.5 MHz gain-bandwidth product is adequate for moderate-frequency measurement paths. Check the supply current at the operating voltage, confirm the device's temperature rating, and include protection against input transients when connecting external cables.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: MC34071DG — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | MC34071DR2G | MC33071DR2G |
|---|---|---|---|
| Package | 8-SOIC | 8-SOIC | 8-SOIC |
| Brand | onsemi | onsemi | onsemi |
| Number of Circuits | 1 | 1 | 1 |
| Amplifier Type | General Purpose | General Purpose | General Purpose |
| Slew Rate | 13 V/us | 13 V/us | 13 V/us |
| Input Transistor Technology | Bipolar | Bipolar | Bipolar fabrication |
Ana Farklılayıcılar
- Higher-voltage single-supply capability (karşılaştırma:MC33071DR2G)
- Identical key dynamic specifications in the closest listed replacement (karşılaştırma:MC34071DR2G)
- Ground-referenced input operation (karşılaştırma:MC33071DR2G)
Tasarım Notları
Design the supply rail around the 3.0 V to 44 V single-supply capability, while also checking the exact maximum supply voltage and input/output limits in the onsemi MC34071 datasheet. The amplifier's ground-referenced input range makes single-rail operation practical, but bypass capacitors should still be placed close to the supply pins. For long external cables, add protection against transients before the amplifier input.
Do not select MC33071DR2G solely because it uses the same 8-SOIC footprint. The MC33071 series has a lower-voltage bias, while MC34071DG supports the 3.0 V to 44 V range. Confirm the supply rating, temperature range, and pin-level requirements of the exact ordering code before treating either related part as a replacement.
Keep the feedback network and input traces compact, and place decoupling capacitors close to the package supply and ground pins. For high-impedance sources, minimize leakage on the input node and consider guarding because the listed input bias current is approximately 100 nA. Use the manufacturer pin-description table when assigning the eight SOIC connections.
The 4.5 MHz gain-bandwidth product and 13 V/us slew rate make the MC34071DG faster than many general-purpose amplifiers, but closed-loop stability still depends on gain, load, and compensation. Simulate the complete feedback network, check capacitive loading at the output, and verify settling against any downstream ADC or sampling requirement.
Uyumluluk Bilgisi
RoHS compliance is listed for the MC34071DG. The available product information does not establish the REACH, lead-free, halogen-free, or conflict-minerals status for this exact ordering code. The device is an obsolete general-purpose operational amplifier rather than an automotive-qualified product.