NXP Semiconductors

MC9S12E128CPV - 16-Bit 25MHz 128KB MCU | NXP

MPN: MC9S12E128CPV ✓ সক্রিয়
112-pin LQFP Package 25 MHz Speed Up to 128 KB Memory
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

MC9S12E128CPV সারাংশ

NXP MC9S12E128CPV is a 16-bit HCS12 microcontroller with a 25 MHz core, 128 KB of Flash EEPROM, up to 8 KB of RAM, and a 112-pin LQFP package measuring 20 x 20 mm. It integrates communication and timing peripherals for embedded control, automotive, industrial, and consumer designs. According to the manufacturer datasheet, the MC9S12E128 family is a low-cost general-purpose MCU built around the HCS12 16-bit central processing unit.

A microcontroller is a semiconductor device that combines a processor core, program memory, data memory, and peripherals on one integrated circuit. In the product hierarchy, the MC9S12E128CPV is an MCU, embedded controller, and general-purpose microcontroller. Its integrated resources allow a system to execute control software while communicating with sensors, actuators, memory, and external equipment without requiring separate devices for each function.

Key resources include three asynchronous serial communications interface modules, one serial peripheral interface, one inter-integrated circuit interface, and three 4-channel 16-bit timer modules. The device supports up to 128 KB of Flash EEPROM and up to 8 KB of RAM. Its 25 MHz operating frequency provides a substantial increase in processing speed over the 16 MHz MC9S12E128 variant identified in distributor catalog information, while the 112-pin LQFP exposes the expanded I/O and peripheral resources of the E128 family.

The HCS12 architecture provides a 16-bit instruction set and a compact embedded-control platform suited to real-time state machines, motor and actuator control, communication gateways, and user-interface controllers. Flash EEPROM allows firmware to be programmed and revised without external program memory, while the on-chip RAM supports working variables, stack operations, and communication buffers. The separate SCI, SPI, and IIC peripherals support serial device connectivity without sharing a generic parallel interface.

Typical uses include industrial control modules, automotive body and accessory controllers, sensor interfaces, communication equipment, and compact embedded products. The 112-pin package provides enough pins for multiple digital inputs and outputs alongside the dedicated serial interfaces. Engineers should also review clocking, reset, memory programming, and module-specific application notes before finalizing a new design.

A key design consideration is power and signal integrity around a 112-lead quad flat package. Place decoupling capacitors at each supply pin, route oscillator and reset signals away from high-current switching nodes, and preserve a continuous ground reference beneath the device. Confirm the exact pin names, alternate-function multiplexing, and peripheral electrical limits in the manufacturer pin-description tables before assigning PCB nets.

This page combines the device identity, package information, integration resources, sourcing guidance, verified drop-in candidates, and implementation notes needed to evaluate the MC9S12E128CPV for an embedded-control design.

এর জন্য ড্রপ-ইন বিকল্প MC9S12E128CPV — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible MC9S12E128CPV (একই form factor এবং footprint).

MC9S12E128CPVE

✅ ড্রপ-ইন
📦 112-LQFP (20x20 mm)
Ordering suffix identifies the extended-temperature variant; core frequency of 25 MHz and Flash memory of 128 KB are unchanged

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MC9S12E128CPV সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Product Type 16-bit HCS12 microcontroller
Maximum CPU Frequency 25 MHz
Flash EEPROM Up to 128 KB
RAM Up to 8 KB
SCI Modules 3 modules
SPI Modules 1 module
IIC Modules 1 module
Timer Modules 3 modules
Timer Configuration 3 x 4-channel 16-bit timers
Central Processing Unit HCS12 16-bit CPU
প্যাকেজ 112-pin LQFP
Package Dimensions 20 x 20 mm
Terminal Count 112 terminals
মাউন্টিং টাইপ Surface mount
Package Terminal Form Gull wing
Temperature Grade Industrial

MC9S12E128CPV gull wing পিন কনফিগারেশন গাইড

MC9S12E128CPV (gull wing প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

MC9S12E128CPV-এর জন্য gull wing প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MC9S12E128CPV.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

MC9S12E128CPV এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Automation Controller, Automotive Body Control Module, Serial Communication Gateway, Motor and Actuator Control, Sensor Acquisition and Conditioning, Embedded Measurement Instrument.

🏭

Industrial Automation Controller

The MC9S12E128CPV fits industrial automation controllers that require deterministic 16-bit processing and several communication interfaces. Its 25 MHz HCS12 CPU supports protocol handling and real-time control tasks, while 128 KB of Flash EEPROM accommodates application firmware, configuration data, and update logic. Three SCI modules can connect serial equipment, SPI can serve fast external peripherals, and IIC supports lower-speed two-wire devices. The 112-pin LQFP also provides substantial parallel I/O for sensors, discrete inputs, and actuator outputs.

🚗

Automotive Body Control Module

The MC9S12E128CPV can serve as the central controller in an automotive body or accessory-control module when the selected ordering configuration meets the product's environmental requirements. Its three SCI modules support diagnostic and distributed serial networks, while SPI and IIC permit connection to sensors, transceivers, and memory. The 128 KB Flash EEPROM accommodates state-machine code and diagnostics, and up to 8 KB of RAM provides working storage. Automotive production use requires confirmation of temperature grade, qualification, and supply longevity.

🌐

Serial Communication Gateway

The MC9S12E128CPV is well suited to a serial gateway that translates among multiple embedded communication formats. Three SCI modules permit simultaneous handling of asynchronous links, while the SPI and IIC controllers connect local sensors, memory, or expansion devices. At 25 MHz, the HCS12 processor can supervise protocol timing, buffering, status reporting, and configuration updates. The 128 KB Flash EEPROM allows substantial protocol and routing logic, while the 112-pin package exposes enough I/O for indicators, control signals, and isolated communication interfaces.

⚡

Motor and Actuator Control

The MC9S12E128CPV can coordinate motors, valves, relays, and other actuators in a compact embedded controller. Its three timer modules contain 4-channel 16-bit counters, providing resources for input capture, output compare, periodic events, and motor-timing functions. The 16-bit CPU architecture is appropriate for proportional control and sequencing, while SCI, SPI, and IIC support position sensors, communication gateways, and configuration devices. Firmware must verify the exact timer pin multiplexing and arrange safe output states during reset and fault conditions.

🧩

Sensor Acquisition and Conditioning

The MC9S12E128CPV can act as the supervisory MCU in a mixed-signal sensor module. Its 25 MHz processing core supports sampling schedules, calibration, filtering, and condition reporting, while SPI and IIC connect to suitable sensors and converters. Three SCI modules provide a path to a host computer or service interface, and 128 KB of Flash EEPROM leaves room for calibration tables and application firmware. With up to 8 KB of RAM, the device can maintain sample buffers and protocol state while keeping the external component count low.

📺

Embedded Measurement Instrument

The MC9S12E128CPV supports compact measurement instruments that combine control, communications, and data acquisition. Its 16-bit HCS12 CPU can execute measurement sequencing and local processing, while 128 KB of Flash EEPROM stores firmware, configuration, and instrument-specific calibration. SCI, SPI, and IIC interfaces allow connection to display controllers, memory, converters, and sensors. The 112-pin LQFP provides a practical balance between I/O capacity and board area for industrial meters, analyzers, and diagnostic equipment.

What is the MC9S12E128CPV?
The MC9S12E128CPV is a 16-bit HCS12 general-purpose microcontroller from NXP Semiconductors. According to the MC9S12E128 datasheet, it operates at up to 25 MHz and includes 128 KB of Flash EEPROM, up to 8 KB of RAM, three SCI modules, one SPI module, one IIC module, and three 4-channel 16-bit timer modules. It is packaged in a 112-pin LQFP measuring 20 x 20 mm.
What are the key specifications of MC9S12E128CPV that engineers should know?
The MC9S12E128CPV combines a 25 MHz HCS12 16-bit CPU with 128 KB of Flash EEPROM, up to 8 KB of RAM, and extensive serial and timer peripherals. Its communications resources include three SCI modules, one SPI module, and one IIC interface, while timing is handled by three 4-channel 16-bit timer modules. The device uses a 112-pin, 20 x 20 mm LQFP package for applications requiring numerous external connections.
What is the operating voltage of MC9S12E128CPV?
The MC9S12E128CPV supply-voltage limits must be confirmed in the NXP MC9S12E128 datasheet before power design or regulator selection. The manufacturer describes the family as a low-cost general-purpose MCU for industrial and embedded applications, but the exact operating range is not reproduced on this product page. Use the electrical-characteristics and recommended-operating-conditions tables for the specific 25 MHz configuration.
Where can I download the MC9S12E128CPV datasheet PDF?
The MC9S12E128CPV datasheet PDF can be downloaded from the NXP document link listed on this page. The manufacturer document is MC9S12E128V1 and covers the MC9S12E128, MC9S12E64, and MC9S12E32 families. It includes the HCS12 CPU, memory resources, serial interfaces, timers, package variants, electrical characteristics, and application information needed for hardware and firmware design.
Where can I find the MC9S12E128CPV pinout?
The MC9S12E128CPV pinout is published in the NXP MC9S12E128V1 manufacturer datasheet. The device uses a 112-pin LQFP package, so the package pin-description and connection tables are essential for assigning power, ground, clock, reset, debug, communications, timer, and general-purpose I/O nets. Check alternate-function multiplexing against the selected peripheral configuration before releasing a PCB layout.
What communications peripherals are integrated in MC9S12E128CPV?
The MC9S12E128CPV integrates three asynchronous SCI modules, one SPI module, and one IIC module. According to the NXP datasheet introduction, these peripherals support serial communication in a general-purpose embedded controller. The SCI modules can serve asynchronous serial links, SPI supports synchronous peripheral connections, and IIC supports two-wire device addressing. Firmware must enable the required pins and peripheral clocks through the device configuration registers.
Is MC9S12E128CPV suitable for industrial control applications?
The MC9S12E128CPV is suitable for industrial control applications that fit its HCS12 processing capacity, 128 KB of Flash EEPROM, up to 8 KB of RAM, and extensive communication and timer resources. Distributor catalog information identifies the part as an industrial-temperature-grade device. Final qualification should confirm its exact operating-temperature limits, electrical characteristics, and any application-specific reliability requirements.
How does MC9S12E128CPV compare with MC9S12E128CPVE?
MC9S12E128CPVE is identified as a 16-bit, 25 MHz HCS12 microcontroller with 128 KB Flash and a 112-LQFP 20 x 20 mm package, making it a close same-package candidate. The CPVE ordering code identifies the extended-temperature variant, while CPV denotes the standard industrial package designation. Confirm the complete ordering-code temperature and quality treatment in the NXP datasheet before treating the two MPNs as interchangeable.
What is the best drop-in replacement for MC9S12E128CPV?
MC9S12E128CPVE is the closest documented drop-in candidate for MC9S12E128CPV because both use the 112-pin LQFP 20 x 20 mm package and are listed for the 16-bit, 25 MHz, 128 KB Flash HCS12 family. Before replacement, verify the temperature grade, exposed programming and debugging interfaces, peripheral multiplexing, clock limits, and supply requirements. No broader set of confirmed pin-to-pin alternatives was established.
Can MC9S12E128CPVE replace MC9S12E128CPV?
MC9S12E128CPVE can be considered a pin-compatible replacement candidate because distributor information identifies the same 25 MHz HCS12 core, 128 KB Flash configuration, and 112-LQFP 20 x 20 mm package. Its extended-temperature ordering suffix must be checked against the target application's environmental requirements. Confirm the device mask, errata, qualification status, and production configuration before a drop-in production release.
When should I choose MC9S12E128CPV instead of MC9S12A128CPV?
Choose MC9S12E128CPV when the design specifically requires the E128 family's documented combination of a 25 MHz HCS12 CPU, 128 KB Flash EEPROM, up to 8 KB of RAM, three SCI modules, SPI, IIC, and three timer modules. MC9S12A128CPV appears in search results with similar headline memory and package figures, but that similarity does not prove identical pin multiplexing or peripheral behavior. Use the E128 documentation unless an A128-specific qualification is completed.
What can replace MC9S12E128CPV?
MC9S12E128CPVE is the most directly supported replacement candidate because it retains the 112-pin LQFP 20 x 20 mm package and the documented 25 MHz, 128 KB Flash HCS12 architecture. A true drop-in replacement also requires equivalent pin multiplexing, peripheral resources, clock behavior, electrical limits, startup, and programming support. Treat the candidate as subject to device-specific review rather than an automatic production substitute.
Is MC9S12E128CPV the same as MC9S12C128VPBE?
No. MC9S12C128VPBE appears in a cross-reference search, but the target MC9S12E128CPV uses a 112-pin LQFP while the VPBE ordering code denotes a different package configuration. Different package pin counts or lead arrangements prevent a direct drop-in substitution. The C128 part may be useful only as a functional platform candidate, and it requires a full PCB and firmware compatibility review.
Where to buy MC9S12E128CPV online?
Use the Request a Quote form on this page to request MC9S12E128CPV availability, current pricing, and lead time. The form is the appropriate channel for an exact-order inquiry that includes the full MPN and required quantity. For technical confirmation, request the current NXP datasheet and product lifecycle information with the quotation so procurement receives an exact configuration rather than a related MC9S12E variant.
What is the price and lead time for MC9S12E128CPV?
Current MC9S12E128CPV pricing and lead time should be requested through the Request a Quote form on this page. Quote confirmation should include the quantity, delivery target, packaging requirement, and any scheduled production needs. Distributor search listings can change independently, so a quotation tied to the exact MPN is preferable when build schedules, allocation, or obsolete-inventory risk matter.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MC9S12E128CPV — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose MC9S12E128CPV for industrial and embedded-control designs that specifically target the standard CPV ordering option, a 25 MHz HCS12 core, 128 KB of Flash EEPROM, and up to 8 KB of RAM. MC9S12E128CPVE is the preferred candidate when its extended-temperature ordering option matches the deployment environment and the same 112-LQFP footprint, CPU speed, memory, and peripheral set are required. MC9S12A128CPV should not replace the E128 device solely because headline memory and package figures are similar; its pin multiplexing and peripheral behavior require independent verification. MC9S12C128VPBE is not a direct board-level substitute because its package ordering code differs from the target's 112-pin LQFP. For every substitution, compare clock limits, timer channels, serial peripheral resources, interrupt behavior, electrical characteristics, programming interfaces, and firmware dependencies before production release.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য MC9S12E128CPVE
Brand NXP Semiconductors NXP Semiconductors
Package 112-LQFP (20x20 mm) 112-LQFP (20x20 mm)
CPU Architecture HCS12 16-bit HCS12 16-bit
Maximum CPU Frequency 25 MHz 25 MHz
Flash EEPROM 128 KB 128 KB
RAM Up to 8 KB Up to 8 KB
Communication Peripherals 3 SCI, 1 SPI, 1 IIC 3 SCI, 1 SPI, 1 IIC
Timer Resources 3 x 4-channel 16-bit timers 3 x 4-channel 16-bit timers
Temperature Ordering Option CPV CPVE extended-temperature option

মূল পার্থক্যসমূহ

  • Higher CPU frequency than the 16 MHz catalog configuration (বনামMC9S12E128CPV)
  • Substantial integrated Flash and RAM (বনামMC9S12E128CPVE)
  • Multiple dedicated serial interfaces (বনামMC9S12E128CPVE)

ডিজাইন নোট

Place the required decoupling capacitors directly beside each power-supply pin and keep the return path through the ground plane. Separate analog and digital supply paths where the device provides distinct supply pins, and verify the required voltage tolerances and sequencing in the NXP electrical-characteristics tables. A bulk capacitor near the supply entry can supplement local ceramic bypass, but it does not replace high-frequency decoupling at the pins.

Use a short, symmetrical clock path and follow the manufacturer's recommended crystal or oscillator network and load-capacitor arrangement. Keep oscillator traces away from switching power nodes and high-current outputs. Route reset as a controlled signal with appropriate pull components, and avoid routing motor, relay, or actuator outputs beneath the MCU footprint where inductive transients could couple into sensitive inputs.

Do not assign communication or timer functions from memory alone. The 112-pin LQFP exposes many multiplexed signals, and the correct peripheral behavior depends on the device mask, package, clock configuration, and selected pins. Cross-check every signal against the pin-description and alternate-function tables, then verify reserved or unused pins in the final schematic and PCB layout. Programming and debug connectivity should also be tested before volume production.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The manufacturer datasheet identifies the MC9S12E128 family as a general-purpose MCU. Explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the current manufacturer product documentation or declaration.

ডেটা যাচাই করা হয়েছে: 2026-11-20 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

MC9S12E128CPV datasheet MC9S12E128CPV datasheet pdf MC9S12E128CPV pinout MC9S12E128CPV replacement MC9S12E128CPV equivalent MC9S12E128CPV cross reference MC9S12E128CPV price MC9S12E128CPV stock NXP MC9S12E128CPV MC9S12E128CPV 112 LQFP MC9S12E128CPV 25 MHz 128KB MC9S12E128CPV industrial controller MC9S12E128CPV vs MC9S12E128CPVE MC9S12E128CPV footprint MC9S12E128CPV application circuit

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

NXP Semiconductors Motorola Freescale Semiconductor MC9S12E128CPV MC9S12E128CPVE MC9S12A128CPV MC9S12C128VPBE HCS12 microcontroller embedded controller general-purpose MCU 16-bit CPU Flash EEPROM RAM SCI SPI IIC timer module LQFP-112 20 x 20 mm LQFP industrial control automotive body control serial communication gateway sensor acquisition
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন