MC9S12E128CPV - 16-Bit 25MHz 128KB MCU | NXP
Référence : MC9S12E128CPV ✓ ActifMC9S12E128CPV Présentation
A microcontroller is a semiconductor device that combines a processor core, program memory, data memory, and peripherals on one integrated circuit. In the product hierarchy, the MC9S12E128CPV is an MCU, embedded controller, and general-purpose microcontroller. Its integrated resources allow a system to execute control software while communicating with sensors, actuators, memory, and external equipment without requiring separate devices for each function.
Key resources include three asynchronous serial communications interface modules, one serial peripheral interface, one inter-integrated circuit interface, and three 4-channel 16-bit timer modules. The device supports up to 128 KB of Flash EEPROM and up to 8 KB of RAM. Its 25 MHz operating frequency provides a substantial increase in processing speed over the 16 MHz MC9S12E128 variant identified in distributor catalog information, while the 112-pin LQFP exposes the expanded I/O and peripheral resources of the E128 family.
The HCS12 architecture provides a 16-bit instruction set and a compact embedded-control platform suited to real-time state machines, motor and actuator control, communication gateways, and user-interface controllers. Flash EEPROM allows firmware to be programmed and revised without external program memory, while the on-chip RAM supports working variables, stack operations, and communication buffers. The separate SCI, SPI, and IIC peripherals support serial device connectivity without sharing a generic parallel interface.
Typical uses include industrial control modules, automotive body and accessory controllers, sensor interfaces, communication equipment, and compact embedded products. The 112-pin package provides enough pins for multiple digital inputs and outputs alongside the dedicated serial interfaces. Engineers should also review clocking, reset, memory programming, and module-specific application notes before finalizing a new design.
A key design consideration is power and signal integrity around a 112-lead quad flat package. Place decoupling capacitors at each supply pin, route oscillator and reset signals away from high-current switching nodes, and preserve a continuous ground reference beneath the device. Confirm the exact pin names, alternate-function multiplexing, and peripheral electrical limits in the manufacturer pin-description tables before assigning PCB nets.
This page combines the device identity, package information, integration resources, sourcing guidance, verified drop-in candidates, and implementation notes needed to evaluate the MC9S12E128CPV for an embedded-control design.
Alternatives de remplacement direct pour MC9S12E128CPV — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MC9S12E128CPV (même facteur de forme et même empreinte).
MC9S12E128CPVE
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MC9S12E128CPV Valeurs maximales et caractéristiques électriques
| Product Type | 16-bit HCS12 microcontroller |
| Maximum CPU Frequency | 25 MHz |
| Flash EEPROM | Up to 128 KB |
| RAM | Up to 8 KB |
| SCI Modules | 3 modules |
| SPI Modules | 1 module |
| IIC Modules | 1 module |
| Timer Modules | 3 modules |
| Timer Configuration | 3 x 4-channel 16-bit timers |
| Central Processing Unit | HCS12 16-bit CPU |
| Boîtier | 112-pin LQFP |
| Package Dimensions | 20 x 20 mm |
| Terminal Count | 112 terminals |
| Type de montage | Surface mount |
| Package Terminal Form | Gull wing |
| Temperature Grade | Industrial |
Guide de configuration des broches du MC9S12E128CPV gull wing
Configuration des broches du MC9S12E128CPV (boîtier gull wing). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour MC9S12E128CPV.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
MC9S12E128CPV convient pour 6 applications: Industrial Automation Controller, Automotive Body Control Module, Serial Communication Gateway, Motor and Actuator Control, Sensor Acquisition and Conditioning, Embedded Measurement Instrument.
Industrial Automation Controller
The MC9S12E128CPV fits industrial automation controllers that require deterministic 16-bit processing and several communication interfaces. Its 25 MHz HCS12 CPU supports protocol handling and real-time control tasks, while 128 KB of Flash EEPROM accommodates application firmware, configuration data, and update logic. Three SCI modules can connect serial equipment, SPI can serve fast external peripherals, and IIC supports lower-speed two-wire devices. The 112-pin LQFP also provides substantial parallel I/O for sensors, discrete inputs, and actuator outputs.
Recommandé
Automotive Body Control Module
The MC9S12E128CPV can serve as the central controller in an automotive body or accessory-control module when the selected ordering configuration meets the product's environmental requirements. Its three SCI modules support diagnostic and distributed serial networks, while SPI and IIC permit connection to sensors, transceivers, and memory. The 128 KB Flash EEPROM accommodates state-machine code and diagnostics, and up to 8 KB of RAM provides working storage. Automotive production use requires confirmation of temperature grade, qualification, and supply longevity.
Recommandé
Serial Communication Gateway
The MC9S12E128CPV is well suited to a serial gateway that translates among multiple embedded communication formats. Three SCI modules permit simultaneous handling of asynchronous links, while the SPI and IIC controllers connect local sensors, memory, or expansion devices. At 25 MHz, the HCS12 processor can supervise protocol timing, buffering, status reporting, and configuration updates. The 128 KB Flash EEPROM allows substantial protocol and routing logic, while the 112-pin package exposes enough I/O for indicators, control signals, and isolated communication interfaces.
Recommandé
Motor and Actuator Control
The MC9S12E128CPV can coordinate motors, valves, relays, and other actuators in a compact embedded controller. Its three timer modules contain 4-channel 16-bit counters, providing resources for input capture, output compare, periodic events, and motor-timing functions. The 16-bit CPU architecture is appropriate for proportional control and sequencing, while SCI, SPI, and IIC support position sensors, communication gateways, and configuration devices. Firmware must verify the exact timer pin multiplexing and arrange safe output states during reset and fault conditions.
Recommandé
Sensor Acquisition and Conditioning
The MC9S12E128CPV can act as the supervisory MCU in a mixed-signal sensor module. Its 25 MHz processing core supports sampling schedules, calibration, filtering, and condition reporting, while SPI and IIC connect to suitable sensors and converters. Three SCI modules provide a path to a host computer or service interface, and 128 KB of Flash EEPROM leaves room for calibration tables and application firmware. With up to 8 KB of RAM, the device can maintain sample buffers and protocol state while keeping the external component count low.
Recommandé
Embedded Measurement Instrument
The MC9S12E128CPV supports compact measurement instruments that combine control, communications, and data acquisition. Its 16-bit HCS12 CPU can execute measurement sequencing and local processing, while 128 KB of Flash EEPROM stores firmware, configuration, and instrument-specific calibration. SCI, SPI, and IIC interfaces allow connection to display controllers, memory, converters, and sensors. The 112-pin LQFP provides a practical balance between I/O capacity and board area for industrial meters, analyzers, and diagnostic equipment.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MC9S12E128CPV — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MC9S12E128CPVE |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Package | 112-LQFP (20x20 mm) | 112-LQFP (20x20 mm) |
| CPU Architecture | HCS12 16-bit | HCS12 16-bit |
| Maximum CPU Frequency | 25 MHz | 25 MHz |
| Flash EEPROM | 128 KB | 128 KB |
| RAM | Up to 8 KB | Up to 8 KB |
| Communication Peripherals | 3 SCI, 1 SPI, 1 IIC | 3 SCI, 1 SPI, 1 IIC |
| Timer Resources | 3 x 4-channel 16-bit timers | 3 x 4-channel 16-bit timers |
| Temperature Ordering Option | CPV | CPVE extended-temperature option |
Principaux différenciateurs
- Higher CPU frequency than the 16 MHz catalog configuration (vs MC9S12E128CPV)
- Substantial integrated Flash and RAM (vs MC9S12E128CPVE)
- Multiple dedicated serial interfaces (vs MC9S12E128CPVE)
Notes de conception
Place the required decoupling capacitors directly beside each power-supply pin and keep the return path through the ground plane. Separate analog and digital supply paths where the device provides distinct supply pins, and verify the required voltage tolerances and sequencing in the NXP electrical-characteristics tables. A bulk capacitor near the supply entry can supplement local ceramic bypass, but it does not replace high-frequency decoupling at the pins.
Use a short, symmetrical clock path and follow the manufacturer's recommended crystal or oscillator network and load-capacitor arrangement. Keep oscillator traces away from switching power nodes and high-current outputs. Route reset as a controlled signal with appropriate pull components, and avoid routing motor, relay, or actuator outputs beneath the MCU footprint where inductive transients could couple into sensitive inputs.
Do not assign communication or timer functions from memory alone. The 112-pin LQFP exposes many multiplexed signals, and the correct peripheral behavior depends on the device mask, package, clock configuration, and selected pins. Cross-check every signal against the pin-description and alternate-function tables, then verify reserved or unused pins in the final schematic and PCB layout. Programming and debug connectivity should also be tested before volume production.
Informations de conformité
The manufacturer datasheet identifies the MC9S12E128 family as a general-purpose MCU. Explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the current manufacturer product documentation or declaration.