MCP3426A5-E/MS - 16-Bit Dual-Channel ADC | Microchip
MPN: MCP3426A5-E/MS ✓ সক্রিয়MCP3426A5-E/MS সারাংশ
A delta-sigma ADC is a data-converter category that uses continuous-time oversampling and digital filtering to convert an analog voltage into a high-resolution digital code. Within the broader semiconductor hierarchy, this device is an analog-to-digital converter, data-converter IC, and signal-chain component. Its differential inputs are suited to sensor outputs and measurement circuits in which rejecting common-mode voltage improves signal integrity.
The MCP3426 family provides up to 16-bit resolution and two analog input channels. Its onboard precision reference is 2.048 V, enabling a differential input range of ±2.048 V. Differential operation allows each conversion to represent the voltage difference between two inputs rather than relying on a single signal referenced to ground. This is valuable when the source has a low amplitude and is mounted in an electrically noisy environment.
At 15 samples per second, the MCP3426A5-E/MS prioritizes resolution and low-noise measurement over high-speed acquisition. This operating rate suits temperature, pressure, strain, chemical, and slow-moving process sensors that do not require kilohertz sampling. The 2.7 V to 5.5 V supply range also permits operation with both 3.3 V and 5 V systems, although each channel still requires suitable input and reference arrangements.
Typical uses include industrial process monitoring, portable instrumentation, environmental sensing, laboratory measurement equipment, and low-speed data acquisition. A current or resistive sensor can be connected to the differential inputs when its output stays within the ±2.048 V differential range. For applications requiring faster acquisition, a different MCP3426 speed option may be more appropriate because the sampling rate and conversion time trade directly against effective resolution.
PCB design should keep the analog inputs, reference connections, and decoupling paths compact. Place input filtering components close to their associated pins, use a quiet ground plane beneath the analog section, and route digital control and communication traces away from sensitive input nodes. Follow the manufacturer pin-description table and application guidance when assigning tracks and selecting external components.
This page combines device specifications, application guidance, design notes, and board-level substitute information to support faster component selection. It distinguishes the MCP3426A5-E/MS from other conversion-rate options in the same family and identifies the engineering conditions under which an equivalent MSOP device can be considered.
এর জন্য ড্রপ-ইন বিকল্প MCP3426A5-E/MS — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible MCP3426A5-E/MS (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Differential Input Range, Conversion Rate, Operating Temperature Range, ADC Type.
MCP3426A0-E/MS
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →MCP3426A3-E/MS
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →MCP3426A4-E/MS
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →MCP3426A6-E/MS
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →MCP3426A7-E/MS
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →MCP3426A5-E/MS সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| ADC Type | 16-bit delta-sigma ADC |
| Number of Analog Input Channels | 2 channels |
| Input Configuration | Differential inputs |
| Conversion Rate | 15 samples/s |
| Onboard Reference Voltage | 2.048 V |
| Differential Input Range | -2.048 V to +2.048 V |
| অপারেটিং সাপ্লাই ভোল্টেজ | 2.7 V to 5.5 V |
| অপারেটিং তাপমাত্রার পরিসর | -55 °C to +125 °C |
| প্যাকেজ | 8-pin MSOP |
| Package Family | MSOP surface-mount package |
| পিনের সংখ্যা | 8 pins |
MCP3426A5-E/MS msop surface-mount package পিন কনফিগারেশন গাইড
MCP3426A5-E/MS (msop surface-mount package প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MCP3426A5-E/MS.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
MCP3426A5-E/MS এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Temperature Sensing, Pressure and Strain Instrumentation, Environmental and Gas Monitoring, Portable Laboratory Instruments, Current and Resistance Measurement, Low-Speed Data Acquisition.
Industrial Temperature Sensing
The MCP3426A5-E/MS fits slow industrial temperature measurements that require a 16-bit conversion and two differential input channels. Its 15-sample/s rate captures thermal changes without the bandwidth demand of a high-speed ADC, while the ±2.048 V differential range accepts suitably conditioned RTD, thermocouple, or resistive-bridge signals. A ratiometric or differential sensor arrangement can reduce supply and reference sensitivity. The important tradeoff is timing: the A5 rate is suitable for thermal processes with modest bandwidth, but it is not intended for rapid temperature transients.
সুপারিশকৃত
Pressure and Strain Instrumentation
The MCP3426A5-E/MS is appropriate for pressure-cell and strain-gauge systems where the analog signal changes slowly but has a relatively small amplitude. Two differential inputs can monitor a bridge output or a pair of related sensor channels, and the onboard 2.048 V reference supports a ±2.048 V differential measurement range. At 15 samples/s, the converter provides ample time for low-frequency mechanical changes while retaining 16-bit digital resolution. Use careful input protection and filtering because sensor excitation and bridge wiring can introduce noise or transient overvoltage.
সুপারিশকৃত
Environmental and Gas Monitoring
The MCP3426A5-E/MS can digitize slow-changing environmental sensor outputs in gas, humidity, and air-quality monitoring systems. Its two differential channels are useful when a board must combine a sensing channel with a reference or diagnostic channel. The 16-bit resolution can expose small changes in the conditioned sensor voltage, and the 15-sample/s conversion rate is more than adequate for many atmospheric measurements. The circuit must keep sensor excitation and digital communication sufficiently separated to prevent noise from obscuring the small signal being measured.
সুপারিশকৃত
Portable Laboratory Instruments
The MCP3426A5-E/MS suits portable laboratory and field instruments that prioritize measurement resolution over waveform acquisition speed. Its dual differential inputs can support two low-level transducers, while the 2.7 V to 5.5 V operating range permits use in both 3.3 V and 5 V portable systems. At 15 samples/s, a handheld logger can record slowly varying pressure, temperature, or chemical-sensor data efficiently. Low-power operation and analog-noise performance should still be checked against the complete sensor and signal-conditioning circuit.
সুপারিশকৃত
Current and Resistance Measurement
The MCP3426A5-E/MS can measure slow current or resistance-derived voltages when the signal is scaled into the ±2.048 V differential input range. A shunt amplifier, bridge, or passive sensor can feed one differential channel, and a second channel can monitor a reference condition. The 15-sample/s rate suits electrical values that change gradually, while 16-bit resolution improves visibility into small changes. Select external shunt and filtering values carefully to prevent overload, ground offsets, or filter delays from dominating the measurement.
সুপারিশকৃত
Low-Speed Data Acquisition
The MCP3426A5-E/MS is useful in compact data-acquisition systems that sample slowly changing voltages but require more precision than a low-resolution ADC. Two channels reduce the need for duplicated converter circuitry, and the serial interface allows sampled values to be transferred to a controller. At 15 samples/s, the converter works well for logging process variables, calibration data, and slowly changing waveforms. Designers should size input filters around the selected conversion timing and account for settling behavior when multiplexing or rapidly changing commands.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MCP3426A5-E/MS — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | MCP3426A0-E/MS | MCP3426A3-E/MS | MCP3426A4-E/MS | MCP3426A6-E/MS | MCP3426A7-E/MS |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 8-MSOP | 8-MSOP | 8-MSOP | 8-MSOP | 8-MSOP | 8-MSOP |
| Resolution | 16 bits | 16 bits | 16 bits | 16 bits | 16 bits | 16 bits |
| Input Channels | 2 differential channels | 2 differential channels | 2 differential channels | 2 differential channels | 2 differential channels | 2 differential channels |
| Onboard Reference | 2.048 V | 2.048 V | 2.048 V | 2.048 V | 2.048 V | 2.048 V |
| Differential Input Range | ±2.048 V | ±2.048 V | ±2.048 V | ±2.048 V | ±2.048 V | ±2.048 V |
| Converter Architecture | Delta-sigma ADC | Delta-sigma ADC | Delta-sigma ADC | Delta-sigma ADC | Delta-sigma ADC | Delta-sigma ADC |
মূল পার্থক্যসমূহ
- Balanced low-speed precision conversion (বনামMCP3426A4-E/MS)
- Two differential inputs in a compact package (বনামMCP3426A0-E/MS)
- Onboard precision reference for direct differential measurement (বনামMCP3426A7-E/MS)
ডিজাইন নোট
Place analog input traces, reference components, and their filtering networks close to the MCP3426A5-E/MS. The two inputs are differential, so route them as a closely coupled pair where practical and avoid sharing a path with digital clock or serial-data traces. Keep the analog ground current path away from noisy digital return currents. Use the manufacturer pin table to confirm whether the exposed package features, if any, require a thermal pad connection.
Design input protection for the actual sensor source rather than relying on the ADC input to absorb transients. A 15-sample/s conversion rate permits useful low-pass filtering, but excessive capacitance or an aggressive RC network can alter settling time. Verify the source impedance against the manufacturer's recommended input network, and use a series resistor where required to limit transient current. Check the complete signal chain for offset, gain, and common-mode error before using the 16-bit resolution.
Do not confuse the 2.7 V to 5.5 V operating supply range with the ±2.048 V measurable differential input range. Both input nodes must remain within the electrical limits described in the MCP3426 family datasheet, and the difference between them must remain in range. A common-mode input can be outside the differential range even when its voltage difference is small. Include startup settling, reference settling, and digital-command timing in system-level measurements.
Place the required bypass capacitor immediately across the device's supply pins and provide a clean return path to the analog ground reference. If the analog and digital supply domains are separated elsewhere in the system, account for their relationship when setting input common-mode levels. Use the manufacturer application circuit as the baseline for capacitor placement, and avoid routing converter switching currents through the input-reference area of the PCB.
কমপ্লায়েন্স তথ্য
Compliance status is not stated in the manufacturer product page excerpt or other cited product listings. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status from the current manufacturer documentation before qualification.