Microchip Technology

MCP3426A5-E/MS - 16-Bit Dual-Channel ADC | Microchip

MPN: MCP3426A5-E/MS ✓ Nakahanda
2.048 V Vdss 8-pin MSOP Package
MOQ: 1 |

MCP3426A5-E/MS Ulas

The Microchip Technology MCP3426A5-E/MS is a 16-bit, dual-channel, delta-sigma analog-to-digital converter with differential inputs and a conversion rate of 15 samples per second. It operates from 2.7 V to 5.5 V, supports an operating temperature range of -55 °C to 125 °C, and is packaged in an 8-pin MSOP. The suffix A5 identifies the device configuration used for low-speed, high-resolution measurements.

A delta-sigma ADC is a data-converter category that uses continuous-time oversampling and digital filtering to convert an analog voltage into a high-resolution digital code. Within the broader semiconductor hierarchy, this device is an analog-to-digital converter, data-converter IC, and signal-chain component. Its differential inputs are suited to sensor outputs and measurement circuits in which rejecting common-mode voltage improves signal integrity.

The MCP3426 family provides up to 16-bit resolution and two analog input channels. Its onboard precision reference is 2.048 V, enabling a differential input range of ±2.048 V. Differential operation allows each conversion to represent the voltage difference between two inputs rather than relying on a single signal referenced to ground. This is valuable when the source has a low amplitude and is mounted in an electrically noisy environment.

At 15 samples per second, the MCP3426A5-E/MS prioritizes resolution and low-noise measurement over high-speed acquisition. This operating rate suits temperature, pressure, strain, chemical, and slow-moving process sensors that do not require kilohertz sampling. The 2.7 V to 5.5 V supply range also permits operation with both 3.3 V and 5 V systems, although each channel still requires suitable input and reference arrangements.

Typical uses include industrial process monitoring, portable instrumentation, environmental sensing, laboratory measurement equipment, and low-speed data acquisition. A current or resistive sensor can be connected to the differential inputs when its output stays within the ±2.048 V differential range. For applications requiring faster acquisition, a different MCP3426 speed option may be more appropriate because the sampling rate and conversion time trade directly against effective resolution.

PCB design should keep the analog inputs, reference connections, and decoupling paths compact. Place input filtering components close to their associated pins, use a quiet ground plane beneath the analog section, and route digital control and communication traces away from sensitive input nodes. Follow the manufacturer pin-description table and application guidance when assigning tracks and selecting external components.

This page combines device specifications, application guidance, design notes, and board-level substitute information to support faster component selection. It distinguishes the MCP3426A5-E/MS from other conversion-rate options in the same family and identifies the engineering conditions under which an equivalent MSOP device can be considered.

Mga alternatibo na pwedeng ilagay na MCP3426A5-E/MS — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok MCP3426A5-E/MS (parehas na form factor at footprint) — pagkakaiba sa Package, Differential Input Range, Conversion Rate, Operating Temperature Range, ADC Type.

Microchip Technology
Differential Input Range: ±2.048 V
Operating Temperature Range: -40°C to +125°C
Microchip Technology
Differential Input Range: ±2.048 V differential
Microchip Technology
Package: 8-MSOP
Differential Input Range: ±2.048 V
Conversion Rate: 15 samples per second
Microchip Technology
Package: 8-MSOP, 3.00 mm width
Operating Temperature Range: -40 °C to +125 °C
ADC Type: Sigma-delta analog-to-digital converter
Microchip Technology
Package: 8-MSOP
Differential Input Range: ±2.048 V
Microchip Technology
Package: 8-DFN (2 x 3 mm)
Differential Input Range: ±2.048 V
Conversion Rate: 15 SPS
Microchip Technology
Differential Input Range: ±2.048 V
Operating Temperature Range: -40°C to +125°C
Microchip Technology
Differential Input Range: ±2.048 V
Operating Temperature Range: -40 °C to +125 °C

MCP3426A0-E/MS

✅ Drop-In
Microchip Technology
📦 8-MSOP
16 bit · 2 channels · 2 differential inputs · 1-channel sigma-delta conversion per differential input · 15 SPS · 2.048 V · ±2.048 V · I2C

Magkontak para sa presyo

Tingnan ang Datasheet →

MCP3426A3-E/MS

✅ Drop-In
Microchip Technology
📦 8-MSOP
Sigma-delta analog-to-digital converter · 16 bit · 2 channels · 15 samples/s · 2.7 V to 5.5 V · -40 °C to +125 °C · 8-MSOP, 3.00 mm width

Magkontak para sa presyo

Tingnan ang Datasheet →

MCP3426A4-E/MS

✅ Drop-In
Microchip Technology
📦 8-MSOP
16 bit · 2 channels · 1-channel delta-sigma ADC · 15 samples/s · 2 differential-capable analog inputs · 2.048 V · ±2.048 V · 2.7 V

Magkontak para sa presyo

Tingnan ang Datasheet →

MCP3426A6-E/MS

✅ Drop-In
Microchip Technology
📦 8-MSOP
16-bit delta-sigma ADC · 2 differential channels · Up to 16 bits · 15 samples/s · Differential input · 2.048 V · ±2.048 V · 3.3 V or 5 V

Magkontak para sa presyo

Tingnan ang Datasheet →

MCP3426A7-E/MS

✅ Drop-In
Microchip Technology
📦 8-MSOP
16 bit · 2 channels · Differential inputs · 1-channel-per-input delta-sigma architecture · 15 samples per second · 2.7 V to 5.5 V · 3.3 V or 5 V · 2.048 V

Magkontak para sa presyo

Tingnan ang Datasheet →

MCP3426A5-E/MS Mga Pinakamataas na Rating at Electrical Characteristics

ADC Type 16-bit delta-sigma ADC
Number of Analog Input Channels 2 channels
Input Configuration Differential inputs
Conversion Rate 15 samples/s
Onboard Reference Voltage 2.048 V
Differential Input Range -2.048 V to +2.048 V
Supply Voltage na Operasyon 2.7 V to 5.5 V
Hanay ng Temperature na Operasyon -55 °C to +125 °C
Packhaging 8-pin MSOP
Package Family MSOP surface-mount package
Bilang ng Pins 8 pins

Gabay sa Pin Configuration ng MCP3426A5-E/MS msop surface-mount package

Pin configuration para sa MCP3426A5-E/MS (msop surface-mount package package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng msop surface-mount package package para sa MCP3426A5-E/MS

Wala ng detalyadong pinout data na magagamit para sa MCP3426A5-E/MS.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

MCP3426A5-E/MS ay nararapat para sa 6 aplikasyons: Industrial Temperature Sensing, Pressure and Strain Instrumentation, Environmental and Gas Monitoring, Portable Laboratory Instruments, Current and Resistance Measurement, Low-Speed Data Acquisition.

🏭

Industrial Temperature Sensing

The MCP3426A5-E/MS fits slow industrial temperature measurements that require a 16-bit conversion and two differential input channels. Its 15-sample/s rate captures thermal changes without the bandwidth demand of a high-speed ADC, while the ±2.048 V differential range accepts suitably conditioned RTD, thermocouple, or resistive-bridge signals. A ratiometric or differential sensor arrangement can reduce supply and reference sensitivity. The important tradeoff is timing: the A5 rate is suitable for thermal processes with modest bandwidth, but it is not intended for rapid temperature transients.

🏭

Pressure and Strain Instrumentation

The MCP3426A5-E/MS is appropriate for pressure-cell and strain-gauge systems where the analog signal changes slowly but has a relatively small amplitude. Two differential inputs can monitor a bridge output or a pair of related sensor channels, and the onboard 2.048 V reference supports a ±2.048 V differential measurement range. At 15 samples/s, the converter provides ample time for low-frequency mechanical changes while retaining 16-bit digital resolution. Use careful input protection and filtering because sensor excitation and bridge wiring can introduce noise or transient overvoltage.

🧩

Environmental and Gas Monitoring

The MCP3426A5-E/MS can digitize slow-changing environmental sensor outputs in gas, humidity, and air-quality monitoring systems. Its two differential channels are useful when a board must combine a sensing channel with a reference or diagnostic channel. The 16-bit resolution can expose small changes in the conditioned sensor voltage, and the 15-sample/s conversion rate is more than adequate for many atmospheric measurements. The circuit must keep sensor excitation and digital communication sufficiently separated to prevent noise from obscuring the small signal being measured.

🔧

Portable Laboratory Instruments

The MCP3426A5-E/MS suits portable laboratory and field instruments that prioritize measurement resolution over waveform acquisition speed. Its dual differential inputs can support two low-level transducers, while the 2.7 V to 5.5 V operating range permits use in both 3.3 V and 5 V portable systems. At 15 samples/s, a handheld logger can record slowly varying pressure, temperature, or chemical-sensor data efficiently. Low-power operation and analog-noise performance should still be checked against the complete sensor and signal-conditioning circuit.

⚡

Current and Resistance Measurement

The MCP3426A5-E/MS can measure slow current or resistance-derived voltages when the signal is scaled into the ±2.048 V differential input range. A shunt amplifier, bridge, or passive sensor can feed one differential channel, and a second channel can monitor a reference condition. The 15-sample/s rate suits electrical values that change gradually, while 16-bit resolution improves visibility into small changes. Select external shunt and filtering values carefully to prevent overload, ground offsets, or filter delays from dominating the measurement.

🖥️

Low-Speed Data Acquisition

The MCP3426A5-E/MS is useful in compact data-acquisition systems that sample slowly changing voltages but require more precision than a low-resolution ADC. Two channels reduce the need for duplicated converter circuitry, and the serial interface allows sampled values to be transferred to a controller. At 15 samples/s, the converter works well for logging process variables, calibration data, and slowly changing waveforms. Designers should size input filters around the selected conversion timing and account for settling behavior when multiplexing or rapidly changing commands.

What is the MCP3426A5-E/MS?
The MCP3426A5-E/MS is a 16-bit, dual-channel delta-sigma ADC from Microchip Technology. It converts two differential analog inputs at 15 samples per second and operates from 2.7 V to 5.5 V in an 8-pin MSOP package. According to the Microchip MCP3426 product page, the family includes an onboard 2.048 V precision reference and supports a differential input range of ±2.048 V, making the A5 option suitable for slow, precision-oriented sensor measurements.
What are the key specifications of MCP3426A5-E/MS that engineers should know?
The MCP3426A5-E/MS provides 16-bit resolution, two differential input channels, a 15-sample/s conversion rate, a 2.048 V onboard reference, and a 2.7 V to 5.5 V operating supply range. Its differential range is ±2.048 V and its specified temperature range is -55 °C to 125 °C. The Microchip MCP3426 product page identifies these core functions, while the 8-MSOP package provides a compact surface-mount implementation for low-speed precision measurements.
Where can I download the MCP3426A5-E/MS datasheet PDF?
The MCP3426A5-E/MS datasheet is available through the official Microchip MCP3426 product page at https://www.microchip.com/en-us/product/MCP3426. The family document covers the converter architecture, electrical characteristics, pin descriptions, typical application circuits, and conversion-rate options. Use the A5 ordering information to confirm that the 15-sample/s variant and 8-pin MSOP configuration match the required board.
Where can I find the MCP3426A5-E/MS pinout?
The MCP3426A5-E/MS pinout is documented in the pin-description section of the Microchip MCP3426 family datasheet. The device uses an 8-pin MSOP package, but the package drawing alone does not establish each signal name. Use the manufacturer pin table to map supply, ground, reference, analog-input, and serial-interface connections before laying out the PCB.
What is the input voltage range of MCP3426A5-E/MS?
The MCP3426A5-E/MS supports a differential input range of ±2.048 V when operated with the device's 2.048 V onboard precision reference. The converter itself operates from a 2.7 V to 5.5 V supply, as stated by Microchip and listed in the product specifications. Supply voltage and measurable input range are separate constraints; an input voltage must remain within both the selected measurement range and the device's absolute maximum limits.
How fast does the MCP3426A5-E/MS sample?
The MCP3426A5-E/MS converts at 15 samples per second. This relatively low rate supports high-resolution acquisition of slowly changing signals such as temperature, pressure, strain, and chemical sensor outputs. According to the Microchip family information, the MCP3426 family includes multiple conversion-rate options, so engineers should select the suffix according to the required acquisition bandwidth rather than treating all MCP3426 variants as timing-identical.
MCP3426A5-E/MS vs MCP3426A4-E/MS - which is better for a precision sensor?
The MCP3426A5-E/MS is the better match when 15 samples per second provides sufficient measurement bandwidth, while the MCP3426A4-E/MS is the slower conversion option. Both are identified as board-level substitutes in the same MCP3426 family and share the 8-MSOP format. The correct choice depends on the sensor's bandwidth: use the faster A5 option for changing signals and the slower A4 option only when its measurement rate satisfies the application.
MCP3426A5-E/MS vs MCP3426A3-E/MS - which conversion rate should I choose?
Choose the MCP3426A5-E/MS when a 15-sample/s rate is required, and choose the MCP3426A3-E/MS when a slower rate better matches the sensor bandwidth. The A5 device is confirmed as a 16-bit, dual-channel, 15-sample/s ADC, while the A3 ordering suffix denotes another conversion-rate option in the MCP3426 family. Both retain the same family architecture and board-level interchangeability, but firmware timing and acquisition latency differ.
When should I choose MCP3426A5-E/MS over another MCP3426 option?
Choose the MCP3426A5-E/MS when the measured signal changes slowly but requires high resolution and two differential input channels. Its 15-sample/s rate is substantially faster than slower MCP3426 suffixes while remaining appropriate for common temperature, pressure, strain, and laboratory sensors. Select a faster family option for waveforms that need greater bandwidth, or a slower option when minimizing conversion activity is more important.
Is MCP3426A5-E/MS suitable for industrial temperature measurement?
The MCP3426A5-E/MS is suitable for many industrial temperature-measurement circuits because its specified operating range extends from -55 °C to 125 °C. Its two differential inputs can measure bridge or ratiometric sensors when the signal remains within the ±2.048 V differential range. The converter's 15-sample/s rate is generally appropriate for thermal processes that change gradually rather than for high-frequency transient measurement.
What can replace MCP3426A5-E/MS?
MCP3426A0-E/MS, MCP3426A3-E/MS, MCP3426A4-E/MS, MCP3426A6-E/MS, and MCP3426A7-E/MS are identified as board-level substitutes for the MCP3426 family. They use the same 8-MSOP format, but the A-suffix selects different conversion-rate options. Confirm that the replacement's acquisition timing, required settling behavior, and configured sample rate satisfy the original system requirements before approving it.
What is the best cross-brand equivalent for MCP3426A5-E/MS?
No verified cross-brand equivalent is established for the MCP3426A5-E/MS. The identified replacements are Microchip Technology members of the same MCP3426 family and are documented as board-level interchangeable. A cross-brand candidate should not be used without confirmation of the same 8-pin MSOP pinout, 16-bit conversion behavior, reference arrangement, serial protocol, timing, and electrical limits.
Where can I buy MCP3426A5-E/MS and check current stock?
Use the Request a Quote form on this page to request current MCP3426A5-E/MS availability, lead time, and ordering information. The part is a cataloged 8-MSOP ADC with documented manufacturer product information, but inventory and production scheduling can change. Provide the required quantity, date code preference, and destination so the commercial request can be answered for the intended build.
What is the price of MCP3426A5-E/MS?
The current MCP3426A5-E/MS commercial terms are handled through the Request a Quote form on this page. Price and lead time depend on order quantity, date-code availability, and current supplier conditions, so a static figure would not remain accurate. Submit the required quantity and packaging preference with the quote request to obtain a current response for the exact MCP3426A5-E/MS ordering code.
What is the lead time for MCP3426A5-E/MS?
The current lead time for MCP3426A5-E/MS should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, stock position, date-code requirements, and production conditions. Include your required quantity, target delivery date, and approved-source expectations so procurement can respond with current scheduling information.

Impormasyon ng Talumpati sa Engineering for MCP3426A5-E/MS — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose MCP3426A5-E/MS when a system needs 16-bit resolution, two differential inputs, and a 15-sample/s acquisition rate for slowly changing sensor signals. Its 2.7 V to 5.5 V supply range, onboard 2.048 V reference, and ±2.048 V differential input range fit portable instruments, environmental monitors, bridge sensors, and industrial process measurement. MCP3426A0-E/MS, MCP3426A3-E/MS, MCP3426A4-E/MS, MCP3426A6-E/MS, and MCP3426A7-E/MS can reuse the same board-level format, but each suffix changes the conversion-rate option. Use A5 when 15 samples/s satisfies the required bandwidth; use a faster option for rapidly changing signals and a slower option when reducing conversion activity is preferable. Do not approve a substitute solely from the package match—verify conversion timing, settling behavior, serial-command timing, and acquisition filtering against the original firmware.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto MCP3426A0-E/MS MCP3426A3-E/MS MCP3426A4-E/MS MCP3426A6-E/MS MCP3426A7-E/MS
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 8-MSOP 8-MSOP 8-MSOP 8-MSOP 8-MSOP 8-MSOP
Resolution 16 bits 16 bits 16 bits 16 bits 16 bits 16 bits
Input Channels 2 differential channels 2 differential channels 2 differential channels 2 differential channels 2 differential channels 2 differential channels
Onboard Reference 2.048 V 2.048 V 2.048 V 2.048 V 2.048 V 2.048 V
Differential Input Range ±2.048 V ±2.048 V ±2.048 V ±2.048 V ±2.048 V ±2.048 V
Converter Architecture Delta-sigma ADC Delta-sigma ADC Delta-sigma ADC Delta-sigma ADC Delta-sigma ADC Delta-sigma ADC

Pangunahing mga Pagkakaiba

  • Balanced low-speed precision conversion (kumpara saMCP3426A4-E/MS)
  • Two differential inputs in a compact package (kumpara saMCP3426A0-E/MS)
  • Onboard precision reference for direct differential measurement (kumpara saMCP3426A7-E/MS)

Talaan ng Disenyo

Place analog input traces, reference components, and their filtering networks close to the MCP3426A5-E/MS. The two inputs are differential, so route them as a closely coupled pair where practical and avoid sharing a path with digital clock or serial-data traces. Keep the analog ground current path away from noisy digital return currents. Use the manufacturer pin table to confirm whether the exposed package features, if any, require a thermal pad connection.

Design input protection for the actual sensor source rather than relying on the ADC input to absorb transients. A 15-sample/s conversion rate permits useful low-pass filtering, but excessive capacitance or an aggressive RC network can alter settling time. Verify the source impedance against the manufacturer's recommended input network, and use a series resistor where required to limit transient current. Check the complete signal chain for offset, gain, and common-mode error before using the 16-bit resolution.

Do not confuse the 2.7 V to 5.5 V operating supply range with the ±2.048 V measurable differential input range. Both input nodes must remain within the electrical limits described in the MCP3426 family datasheet, and the difference between them must remain in range. A common-mode input can be outside the differential range even when its voltage difference is small. Include startup settling, reference settling, and digital-command timing in system-level measurements.

Place the required bypass capacitor immediately across the device's supply pins and provide a clean return path to the analog ground reference. If the analog and digital supply domains are separated elsewhere in the system, account for their relationship when setting input common-mode levels. Use the manufacturer application circuit as the baseline for capacitor placement, and avoid routing converter switching currents through the input-reference area of the PCB.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

Compliance status is not stated in the manufacturer product page excerpt or other cited product listings. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status from the current manufacturer documentation before qualification.

Data napatotohanan sa: 2026-11-20 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

MCP3426A5-E/MS datasheet MCP3426A5-E/MS pinout MCP3426A5-E/MS datasheet pdf MCP3426A5-E/MS specifications MCP3426A5-E/MS equivalent MCP3426A5-E/MS replacement MCP3426A5-E/MS cross reference MCP3426A5-E/MS price MCP3426A5-E/MS stock MCP3426A5-E/MS application circuit MCP3426A5-E/MS vs MCP3426A4-E/MS Microchip MCP3426A5-E/MS

Mga kaugnay na Mga Komponente at mga Tuntunin

Microchip Technology MCP3426A5-E/MS MCP3426A0-E/MS MCP3426A3-E/MS MCP3426A4-E/MS MCP3426A6-E/MS MCP3426A7-E/MS analog-to-digital converter ADC delta-sigma ADC data-converter IC semiconductor differential input 16-bit resolution 15 samples per second 2.048 V precision reference ±2.048 V differential input range 2.7 V to 5.5 V operating supply 8-pin MSOP MSOP package family surface-mount package industrial process monitoring pressure sensor strain gauge temperature measurement
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ