MCP3564T-E/NC - 24-Bit, 153.6 kSPS 4-Channel ADC | Microchip
MPN: MCP3564T-E/NC ✓ সক্রিয়MCP3564T-E/NC সারাংশ
A delta-sigma ADC is a category of analog-to-digital converter that uses oversampling, a digital filter, and noise shaping to convert an analog input into a high-resolution digital result. It belongs to the broader data-converter hierarchy alongside SAR and pipeline ADCs. Delta-sigma devices are particularly suited to precision acquisition because they can combine high nominal resolution with low noise for slowly changing or band-limited inputs.
The MCP3564 combines 24-bit resolution with eight single-ended inputs or four differential inputs. Differential operation rejects common-mode noise and supports bridge-style sensing, while single-ended operation allows several sensors or potentiometer-like signals to share one converter. Its programmable data rate reaches 153.6 kSPS, and the SPI interface provides a straightforward connection to microcontrollers, DSPs, and data-acquisition systems. The low-noise architecture is suited to industrial measurement, sensor interfaces, and precision control systems.
The MCP3564 family is designed for low-noise conversion, with the manufacturer identifying the device as a 24-bit sigma-delta ADC. The conversion architecture uses a single sigma-delta modulator, allowing multiple channels to share the modulator under the device's channel configuration. The 20-UQFN package limits board area, while the exposed-pad construction provides a thermal path from the device to the PCB. A stable reference voltage and careful analog-layout practice remain essential to preserve conversion accuracy.
Typical uses include factory-floor pressure and temperature acquisition, bridge and transducer measurement, laboratory instrumentation, low-level sensor conditioning, and embedded data-logging systems. Differential inputs are especially useful when the source is referenced to a noisy or floating ground. Single-ended channels simplify systems with multiple independent sensors, although their common-mode rejection is inherently lower than that of a differential connection.
Designers should place input filtering and reference-decoupling components close to the converter, preserve a quiet analog ground path, and route digital communications away from sensitive input traces. The 2.7 V to 3.6 V operating range requires compatible supply and logic levels. Because the MCP3564 does not include an internal voltage reference, the external reference network and its bypass capacitor require careful stability and noise analysis.
Microchip identifies MCP3564R as the preferred pin-compatible option for new designs because it adds an onboard voltage reference that the MCP3564 lacks. This page combines device specifications, channel and interface guidance, practical application notes, and a clear comparison between the external-reference MCP3564T-E/NC and the preferred MCP3564R architecture.
এর জন্য ড্রপ-ইন বিকল্প MCP3564T-E/NC — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
MCP3564R
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
MCP3564T-E/NC সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Converter Type | 24-bit low-noise delta-sigma ADC |
| রেজোলিউশন | 24 bit |
| Maximum Conversion Rate | 153.6 kSPS |
| Single-Ended Input Channels | 8 channels |
| Differential Input Channels | 4 channels |
| Architecture | 1 sigma-delta modulator |
| Supply Voltage Range | 2.7 V to 3.6 V |
| Digital Interface | SPI |
| প্যাকেজ | 20-UQFN (3 x 3 mm), exposed pad |
| Onboard Voltage Reference | No |
| External Voltage Reference | Required |
| Input Configuration | 8 single-ended or 4 differential inputs |
| Noise Type | Low-noise sigma-delta conversion |
| RoHS স্ট্যাটাস | Compliant |
| মাউন্টিং টাইপ | Surface mount |
| Package Dimensions | 3 x 3 mm |
MCP3564T-E/NC 3 x 3 mm পিন কনফিগারেশন গাইড
MCP3564T-E/NC (3 x 3 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MCP3564T-E/NC.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
MCP3564T-E/NC এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Pressure and Temperature Acquisition, Bridge and Transducer Measurement, Precision Instrumentation, Embedded Sensor Interface, Low-Noise Data Logging, Process Control Signal Monitoring.
Industrial Pressure and Temperature Acquisition
The MCP3564T-E/NC fits industrial measurement systems that require high nominal resolution and low noise rather than very high conversion speed. Its 24-bit delta-sigma architecture can acquire pressure, temperature, or level signals at 153.6 kSPS maximum while programmable data rates allow slower, quieter measurements. Differential inputs are useful for bridge-based pressure transmitters because they reduce sensitivity to common-mode voltage. The 2.7 V to 3.6 V operating range and compact 20-UQFN 3 x 3 mm package also suit space-constrained industrial electronics. Designers should provide a clean external reference and place input filtering close to the converter.
Bridge and Transducer Measurement
The MCP3564T-E/NC is appropriate for low-level bridge or transducer measurements where four differential channels provide a practical balance between input count and common-mode rejection. A differential measurement compares the two sides of the sensor instead of referencing both signals independently to ground, helping suppress noise common to both inputs. The 24-bit converter and programmable data rate make it possible to balance resolution and acquisition speed. Use the manufacturer channel-selection and reference guidelines when configuring the amplifier network, and confirm that sensor excitation and common-mode voltage remain inside the device operating limits.
Precision Instrumentation
Laboratory and industrial instrumentation can use the MCP3564T-E/NC for low-level analog acquisition with compact circuitry and deterministic digital output. Its 153.6 kSPS maximum rate supports fast sampling, while lower programmable rates can increase useful noise rejection for slow measurements. The SPI interface connects directly to a controller and reduces the need for parallel data buses. Because the MCP3564 family uses an external reference, precision instrument designs should select a low-noise reference with appropriate stability, decouple it close to the device, and include calibration paths for reference and offset errors.
Embedded Sensor Interface
The MCP3564T-E/NC is well suited to embedded systems that digitize multiple slow sensor channels in a compact embedded module. Eight single-ended inputs simplify multi-sensor designs, while four differential channels can be selected when a sensor output floats or carries significant common-mode noise. The 20-UQFN 3 x 3 mm package minimizes board area, and SPI permits deterministic communication with a microcontroller or DSP. The system designer should confirm the reference voltage and SPI logic levels, provide local decoupling, and avoid routing high-current digital or switching paths through the analog input region.
Low-Noise Data Logging
Data-logging equipment can employ the MCP3564T-E/NC when each channel must retain fine amplitude detail over long acquisition periods. Delta-sigma noise shaping and programmable data rates allow the system to favor noise rejection for slow environmental, structural, or process variables. Differential inputs improve measurement integrity when sensor wiring is exposed to industrial noise, while the single-ended option reduces wiring complexity for grounded sources. The converter's small package leaves board area for storage and communication circuitry. Firmware should configure the intended channel map, data rate, and digital-filter behavior before recording measurements.
Process Control Signal Monitoring
The MCP3564T-E/NC supports process-control signal monitoring where controllers need a reliable digital representation of slow analog process variables. It can sample at rates up to 153.6 kSPS, which provides flexibility for closed-loop monitoring and diagnostic tasks. Differential inputs help maintain accuracy when the measured signal is small relative to its common-mode voltage. The compact package is useful in distributed I/O and machine-control modules. Designers should separate analog and digital return currents, keep the external reference quiet, and verify that the programmed conversion rate meets both control-loop latency and noise requirements.
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MCP3564T-E/NC — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | MCP3564R |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 20-UQFN (3 x 3 mm), exposed pad | Pin-compatible MCP3564 family package; exact suffix marking must be confirmed |
| Converter Type | 24-bit low-noise delta-sigma ADC | 24-bit low-noise delta-sigma ADC |
| Maximum Data Rate | 153.6 kSPS | 153.6 kSPS |
| Input Configuration | 8 single-ended or 4 differential inputs | 8 single-ended or 4 differential inputs |
| Supply Voltage Range | 2.7 V to 3.6 V | 2.7 V to 3.6 V |
| Digital Interface | SPI | SPI |
| Onboard Voltage Reference | No | Yes |
| Sigma-Delta Modulators | 1 | 1 |
| External Reference Requirement | External voltage reference required | External reference optional when the onboard reference meets system requirements |
মূল পার্থক্যসমূহ
- External-reference architecture (বনামMCP3564R)
- Preferred migration path for new designs (বনামMCP3564R)
- High-resolution acquisition in a compact package (বনামMCP3564R)
ডিজাইন নোট
Place input filters, reference bypass capacitance, and device decoupling directly beside the associated MCP3564T-E/NC pins. Keep the external-reference route short and avoid running it beneath or parallel to SPI traffic. The device uses a 20-UQFN package with an exposed pad, so the PCB footprint must include the manufacturer land pattern and adequate solderable exposed-pad area rather than a generic QFN-20 footprint.
Use differential inputs for low-level or floating sensor signals and single-ended inputs for sources firmly referenced to analog ground. In differential mode, route each signal as a closely coupled pair where practical, because unequal impedances or asymmetric routing can reduce common-mode rejection. Confirm input range, common-mode limits, and source settling behavior for the selected channel map and programmable data rate.
Keep the analog supply and external reference quiet because supply or reference disturbance can appear in the converted result. Follow the manufacturer's recommended capacitor values and place them near the power and reference pins. The MCP3564 does not include an onboard voltage reference, while MCP3564R does, so reference configuration is an important distinction when comparing the two devices or migrating an existing design.
Bond the exposed pad to a thermal copper area according to the manufacturer land pattern and assembly guidance. This 3 x 3 mm package is compact, but its exposed pad is important for heat transfer into the board. Check the worst-case conversion rate, ambient temperature, and copper area before assuming the board can remove all converter-generated heat.
কমপ্লায়েন্স তথ্য
The product listing identifies the MCP3564T-E/NC as RoHS compliant. Other compliance and material-status fields are not stated in the product information and remain unknown.