Microchip Technology

MCP3564T-E/NC - 24-Bit, 153.6 kSPS 4-Channel ADC | Microchip

MPN: MCP3564T-E/NC ✓ Hoạt động
2.7 V to 3.6 V Vdss 20-UQFN (3 x 3 mm), exposed pad Package
MOQ: 1 |

MCP3564T-E/NC Tóm tắt

Microchip MCP3564T-E/NC is a 24-bit low-noise delta-sigma analog-to-digital converter with a maximum data rate of 153.6 kSPS, eight single-ended or four differential inputs, and a 20-UQFN 3 x 3 mm package. It operates from a 2.7 V to 3.6 V supply and communicates through an SPI interface. The converter supports precision measurement of low-frequency analog signals where resolution, integrated noise performance, compactness, and deterministic digital output are important.

A delta-sigma ADC is a category of analog-to-digital converter that uses oversampling, a digital filter, and noise shaping to convert an analog input into a high-resolution digital result. It belongs to the broader data-converter hierarchy alongside SAR and pipeline ADCs. Delta-sigma devices are particularly suited to precision acquisition because they can combine high nominal resolution with low noise for slowly changing or band-limited inputs.

The MCP3564 combines 24-bit resolution with eight single-ended inputs or four differential inputs. Differential operation rejects common-mode noise and supports bridge-style sensing, while single-ended operation allows several sensors or potentiometer-like signals to share one converter. Its programmable data rate reaches 153.6 kSPS, and the SPI interface provides a straightforward connection to microcontrollers, DSPs, and data-acquisition systems. The low-noise architecture is suited to industrial measurement, sensor interfaces, and precision control systems.

The MCP3564 family is designed for low-noise conversion, with the manufacturer identifying the device as a 24-bit sigma-delta ADC. The conversion architecture uses a single sigma-delta modulator, allowing multiple channels to share the modulator under the device's channel configuration. The 20-UQFN package limits board area, while the exposed-pad construction provides a thermal path from the device to the PCB. A stable reference voltage and careful analog-layout practice remain essential to preserve conversion accuracy.

Typical uses include factory-floor pressure and temperature acquisition, bridge and transducer measurement, laboratory instrumentation, low-level sensor conditioning, and embedded data-logging systems. Differential inputs are especially useful when the source is referenced to a noisy or floating ground. Single-ended channels simplify systems with multiple independent sensors, although their common-mode rejection is inherently lower than that of a differential connection.

Designers should place input filtering and reference-decoupling components close to the converter, preserve a quiet analog ground path, and route digital communications away from sensitive input traces. The 2.7 V to 3.6 V operating range requires compatible supply and logic levels. Because the MCP3564 does not include an internal voltage reference, the external reference network and its bypass capacitor require careful stability and noise analysis.

Microchip identifies MCP3564R as the preferred pin-compatible option for new designs because it adds an onboard voltage reference that the MCP3564 lacks. This page combines device specifications, channel and interface guidance, practical application notes, and a clear comparison between the external-reference MCP3564T-E/NC and the preferred MCP3564R architecture.

Bộ thay thế dễ dàng lắp đặt cho MCP3564T-E/NC — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

MCP3564R

✅ Drop-In
📦 20-UQFN (3 x 3 mm), exposed pad
Same documented pin-compatible MCP3564 architecture, but adds an onboard voltage reference that is not included in MCP3564T-E/NC

📋 Tham chiếu thay thế (không có trong danh mục)

MCP3564T-E/NC Tỷ lệ tối đa & tính chất điện

Converter Type 24-bit low-noise delta-sigma ADC
Độ phân giải 24 bit
Maximum Conversion Rate 153.6 kSPS
Single-Ended Input Channels 8 channels
Differential Input Channels 4 channels
Architecture 1 sigma-delta modulator
Supply Voltage Range 2.7 V to 3.6 V
Digital Interface SPI
Hộp 20-UQFN (3 x 3 mm), exposed pad
Onboard Voltage Reference No
External Voltage Reference Required
Input Configuration 8 single-ended or 4 differential inputs
Noise Type Low-noise sigma-delta conversion
Trạng thái RoHS Compliant
Kiểu lắp đặt Surface mount
Package Dimensions 3 x 3 mm

Hướng dẫn cấu hình chân MCP3564T-E/NC 3 x 3 mm

Cấu hình chân cho MCP3564T-E/NC (3 x 3 mm gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân 3 x 3 mm cho MCP3564T-E/NC

Không có dữ liệu chân cụ thể sẵn có cho MCP3564T-E/NC.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

MCP3564T-E/NC phù hợp cho 6 Áp dụngs: Industrial Pressure and Temperature Acquisition, Bridge and Transducer Measurement, Precision Instrumentation, Embedded Sensor Interface, Low-Noise Data Logging, Process Control Signal Monitoring.

🏭

Industrial Pressure and Temperature Acquisition

The MCP3564T-E/NC fits industrial measurement systems that require high nominal resolution and low noise rather than very high conversion speed. Its 24-bit delta-sigma architecture can acquire pressure, temperature, or level signals at 153.6 kSPS maximum while programmable data rates allow slower, quieter measurements. Differential inputs are useful for bridge-based pressure transmitters because they reduce sensitivity to common-mode voltage. The 2.7 V to 3.6 V operating range and compact 20-UQFN 3 x 3 mm package also suit space-constrained industrial electronics. Designers should provide a clean external reference and place input filtering close to the converter.

📡

Bridge and Transducer Measurement

The MCP3564T-E/NC is appropriate for low-level bridge or transducer measurements where four differential channels provide a practical balance between input count and common-mode rejection. A differential measurement compares the two sides of the sensor instead of referencing both signals independently to ground, helping suppress noise common to both inputs. The 24-bit converter and programmable data rate make it possible to balance resolution and acquisition speed. Use the manufacturer channel-selection and reference guidelines when configuring the amplifier network, and confirm that sensor excitation and common-mode voltage remain inside the device operating limits.

🔧

Precision Instrumentation

Laboratory and industrial instrumentation can use the MCP3564T-E/NC for low-level analog acquisition with compact circuitry and deterministic digital output. Its 153.6 kSPS maximum rate supports fast sampling, while lower programmable rates can increase useful noise rejection for slow measurements. The SPI interface connects directly to a controller and reduces the need for parallel data buses. Because the MCP3564 family uses an external reference, precision instrument designs should select a low-noise reference with appropriate stability, decouple it close to the device, and include calibration paths for reference and offset errors.

🧩

Embedded Sensor Interface

The MCP3564T-E/NC is well suited to embedded systems that digitize multiple slow sensor channels in a compact embedded module. Eight single-ended inputs simplify multi-sensor designs, while four differential channels can be selected when a sensor output floats or carries significant common-mode noise. The 20-UQFN 3 x 3 mm package minimizes board area, and SPI permits deterministic communication with a microcontroller or DSP. The system designer should confirm the reference voltage and SPI logic levels, provide local decoupling, and avoid routing high-current digital or switching paths through the analog input region.

🖥️

Low-Noise Data Logging

Data-logging equipment can employ the MCP3564T-E/NC when each channel must retain fine amplitude detail over long acquisition periods. Delta-sigma noise shaping and programmable data rates allow the system to favor noise rejection for slow environmental, structural, or process variables. Differential inputs improve measurement integrity when sensor wiring is exposed to industrial noise, while the single-ended option reduces wiring complexity for grounded sources. The converter's small package leaves board area for storage and communication circuitry. Firmware should configure the intended channel map, data rate, and digital-filter behavior before recording measurements.

⚡

Process Control Signal Monitoring

The MCP3564T-E/NC supports process-control signal monitoring where controllers need a reliable digital representation of slow analog process variables. It can sample at rates up to 153.6 kSPS, which provides flexibility for closed-loop monitoring and diagnostic tasks. Differential inputs help maintain accuracy when the measured signal is small relative to its common-mode voltage. The compact package is useful in distributed I/O and machine-control modules. Designers should separate analog and digital return currents, keep the external reference quiet, and verify that the programmed conversion rate meets both control-loop latency and noise requirements.

What is the MCP3564T-E/NC?
The MCP3564T-E/NC is a 24-bit low-noise delta-sigma analog-to-digital converter from Microchip Technology. It provides eight single-ended or four differential input channels, a maximum conversion rate of 153.6 kSPS, and an SPI interface. According to the Microchip MCP3564 datasheet and product page, the converter uses one sigma-delta modulator and is packaged in a 20-UQFN package measuring 3 x 3 mm.
What are the key specifications of MCP3564T-E/NC?
The principal MCP3564T-E/NC specifications are 24-bit resolution, a maximum rate of 153.6 kSPS, eight single-ended or four differential channels, and an SPI digital interface. According to the Microchip MCP3564 product information, the device operates from 2.7 V to 3.6 V and uses a 20-UQFN 3 x 3 mm package. Its low-noise sigma-delta architecture makes it suitable for precision acquisition rather than high-speed waveform capture.
How many input channels does MCP3564T-E/NC have?
The MCP3564T-E/NC can operate as an eight-channel single-ended converter or a four-channel differential converter. According to the Microchip MCP3564 datasheet, differential operation allows two inputs to be paired for common-mode rejection, while single-ended operation supports independent analog sources referenced to ground. Choose the configuration that matches the signal source and grounding scheme rather than treating all eight physical inputs as equivalent channels.
What is the maximum sample rate of MCP3564T-E/NC?
The maximum output data rate of the MCP3564T-E/NC is 153.6 kSPS. According to the Microchip MCP3564 datasheet, the conversion rate is programmable, allowing a tradeoff between throughput and noise performance. A faster rate is useful for acquiring more samples quickly, while a lower rate generally gives the digital filter more processing time to suppress out-of-band noise.
What is the supply voltage of MCP3564T-E/NC?
The MCP3564T-E/NC operates from 2.7 V to 3.6 V. According to the Microchip MCP3564 product documentation, the device is intended for low-voltage precision acquisition systems. The external reference and all digital interface levels must remain compatible with this supply range, and the analog, reference, and ground connections should be designed to prevent supply ripple from appearing directly in the conversion result.
Where can I download the MCP3564T-E/NC datasheet PDF?
The official MCP3564T-E/NC technical documents are available through the Microchip MCP3564 product page at https://www.microchip.com/en-us/product/MCP3564. The device family datasheet contains the electrical characteristics, pin descriptions, channel configuration, digital interface, and application information needed for design evaluation. Use the manufacturer document for the authoritative pinout and recommended operating conditions.
Where can I find the MCP3564T-E/NC pinout?
The authoritative MCP3564T-E/NC pinout is shown in the Microchip MCP3564 datasheet and package drawing associated with the product page. The converter uses a 20-UQFN 3 x 3 mm package with an exposed pad, so assigning tracks requires the numbered land-pattern drawing rather than a generic 20-pin symbol. Use the pin-description table to distinguish analog inputs, reference connections, supplies, ground, and SPI signals.
What can replace the MCP3564T-E/NC?
The MCP3564R is the closest documented replacement because Microchip identifies it as a preferred pin-compatible option for new designs. It retains the MCP3564 family conversion architecture while adding an onboard voltage reference. According to the Microchip MCP3564 product page, the MCP3564 does not include that onboard reference, so a replacement must be checked carefully if the original design depends on a specific external reference voltage or bias arrangement.
Is MCP3564R pin compatible with MCP3564T-E/NC?
Yes, Microchip describes the MCP3564R as a preferred pin-compatible option for the MCP3564 family. Its notable functional difference is the addition of an onboard voltage reference that is absent from the MCP3564. According to the manufacturer product page, PCB reuse is possible, but the reference configuration, firmware settings, power-up behavior, and system accuracy should be reviewed before treating MCP3564R as an unconditional functional substitution.
What is the best Microchip equivalent for MCP3564T-E/NC?
The best documented Microchip equivalent is the MCP3564R because the manufacturer explicitly identifies it as pin compatible and preferred for new MCP3564 designs. The MCP3564R adds an onboard voltage reference, while MCP3564T-E/NC requires an external reference. According to Microchip's product information, that reference addition is the principal selection issue to verify during schematic and firmware migration.
When should I choose MCP3564T-E/NC over MCP3564R?
Choose MCP3564T-E/NC when the design intentionally uses a high-quality external reference or requires the non-reference MCP3564 architecture. Choose MCP3564R for new designs when its onboard reference satisfies the accuracy and noise budget. According to Microchip, MCP3564R is preferred for new MCP3564 implementations, so existing external-reference designs should compare reference stability, startup behavior, board area, and calibration requirements before migrating.
Is MCP3564T-E/NC suitable for sensor measurement?
The MCP3564T-E/NC is suitable for many slow or band-limited sensor signals because it combines 24-bit resolution with low-noise delta-sigma conversion and programmable data rates up to 153.6 kSPS. According to the Microchip MCP3564 documentation, differential operation supports measurement of noisy or floating sources. Choose differential channels for better common-mode rejection and single-ended channels for simpler sources referenced to the analog ground.
How does differential input mode help MCP3564T-E/NC designs?
Differential mode allows the MCP3564T-E/NC to measure the voltage difference between two input pins, which reduces sensitivity to voltage shared by both inputs. According to the Microchip MCP3564 family documentation, the device supports four differential channels or eight single-ended channels. Differential pairing is generally preferable for bridge sensors and low-level signals, but input common-mode limits must still be respected.
Where can I buy MCP3564T-E/NC and check its lead time?
Use the Request a Quote form on this page to request MCP3564T-E/NC availability, current lead time, order quantity, and packaging requirements. The form provides a direct purchasing channel without embedding a static price that may become stale. Microchip's product page remains the authoritative source for lifecycle and device-family information, while the quote request should confirm the exact MCP3564T-E/NC suffix and delivery plan.
What is the price of MCP3564T-E/NC?
The current MCP3564T-E/NC price is shown through the Request a Quote form on this page rather than as a static value in this FAQ. Submit the required quantity, package option, and target delivery location to obtain current commercial terms. This approach also allows the supplier to confirm that the quoted line is the exact 20-UQFN MCP3564T-E/NC configuration rather than a related family member.
Is MCP3564T-E/NC in stock and what is its lead time?
Current MCP3564T-E/NC stock and lead time should be requested through the Request a Quote form on this page. Availability can change with order quantity, date code, and manufacturing allocation, so a static stock statement would be unreliable. Include the required quantity, reel or other packaging preference, production schedule, and ship-to country so the supplier can return an actionable delivery commitment.
What layout practices are important for MCP3564T-E/NC?
Keep the analog input, external reference, and ground paths short, and place associated filtering and bypass capacitors close to their device pins. According to the Microchip MCP3564 family guidance, the low-noise converter benefits from a clean analog supply and reference network. Route SPI signals away from sensitive inputs, provide a low-impedance return path, and use the exposed pad as designed for thermal dissipation.

Dữ liệu tham khảo kỹ thuật cho MCP3564T-E/NC — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose MCP3564T-E/NC when the design specifically requires the MCP3564 architecture without the onboard reference or depends on a carefully selected external reference. Choose MCP3564R for new projects when its integrated reference meets the accuracy, drift, noise, and startup requirements, because Microchip identifies it as the preferred pin-compatible option. MCP3564R is preferable when reducing external-reference complexity and PCB area matters. Retain MCP3564T-E/NC for existing qualified platforms, custom reference arrangements, or applications already validated around its external-reference behavior. Before exchanging the parts, verify the exact package suffix, reference configuration, initialization sequence, calibration constants, channel mapping, and firmware because pin compatibility does not remove all functional differences.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này MCP3564R
Brand Microchip Technology Microchip Technology
Package 20-UQFN (3 x 3 mm), exposed pad Pin-compatible MCP3564 family package; exact suffix marking must be confirmed
Converter Type 24-bit low-noise delta-sigma ADC 24-bit low-noise delta-sigma ADC
Maximum Data Rate 153.6 kSPS 153.6 kSPS
Input Configuration 8 single-ended or 4 differential inputs 8 single-ended or 4 differential inputs
Supply Voltage Range 2.7 V to 3.6 V 2.7 V to 3.6 V
Digital Interface SPI SPI
Onboard Voltage Reference No Yes
Sigma-Delta Modulators 1 1
External Reference Requirement External voltage reference required External reference optional when the onboard reference meets system requirements

Bảo phân biệt quan trọng

  • External-reference architecture (vsMCP3564R)
  • Preferred migration path for new designs (vsMCP3564R)
  • High-resolution acquisition in a compact package (vsMCP3564R)

Ghi chú thiết kế

Place input filters, reference bypass capacitance, and device decoupling directly beside the associated MCP3564T-E/NC pins. Keep the external-reference route short and avoid running it beneath or parallel to SPI traffic. The device uses a 20-UQFN package with an exposed pad, so the PCB footprint must include the manufacturer land pattern and adequate solderable exposed-pad area rather than a generic QFN-20 footprint.

Use differential inputs for low-level or floating sensor signals and single-ended inputs for sources firmly referenced to analog ground. In differential mode, route each signal as a closely coupled pair where practical, because unequal impedances or asymmetric routing can reduce common-mode rejection. Confirm input range, common-mode limits, and source settling behavior for the selected channel map and programmable data rate.

Keep the analog supply and external reference quiet because supply or reference disturbance can appear in the converted result. Follow the manufacturer's recommended capacitor values and place them near the power and reference pins. The MCP3564 does not include an onboard voltage reference, while MCP3564R does, so reference configuration is an important distinction when comparing the two devices or migrating an existing design.

Bond the exposed pad to a thermal copper area according to the manufacturer land pattern and assembly guidance. This 3 x 3 mm package is compact, but its exposed pad is important for heat transfer into the board. Check the worst-case conversion rate, ambient temperature, and copper area before assuming the board can remove all converter-generated heat.

Thông tin tuân thủ

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The product listing identifies the MCP3564T-E/NC as RoHS compliant. Other compliance and material-status fields are not stated in the product information and remain unknown.

Dữ liệu được xác minh vào: 2026-11-10 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

MCP3564T-E/NC datasheet MCP3564T-E/NC specifications MCP3564T-E/NC pinout MCP3564T-E/NC datasheet pdf Microchip MCP3564T-E/NC MCP3564T-E/NC equivalent MCP3564T-E/NC replacement MCP3564T-E/NC cross reference MCP3564T-E/NC footprint MCP3564T-E/NC price MCP3564T-E/NC stock MCP3564T-E/NC vs MCP3564R MCP3564 24 bit ADC MCP3564 differential sensor measurement MCP3564 UQFN 20 application circuit

Các bộ phận và thuật ngữ liên quan

Microchip Technology MCP3564T-E/NC MCP3564R MCP3564 24-bit ADC delta-sigma ADC sigma-delta ADC analog-to-digital converter data-converter IC precision data acquisition 153.6 kSPS SPI differential input single-ended input external voltage reference onboard voltage reference low-noise conversion 20-UQFN 3 x 3 mm package exposed pad RoHS industrial sensor measurement bridge sensor process control instrumentation
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ