Microchip Technology

MCP3901A0-I/ML - Dual 24-Bit AFE | Microchip Technology

MPN: MCP3901A0-I/ML ✓ সক্রিয়
1 internal voltage reference Vdss 20-pin QFN (HVQCCN), 4 x 4 mm Package 20 MHz Speed
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

MCP3901A0-I/ML সারাংশ

The Microchip Technology MCP3901A0-I/ML is a dual-channel analog front end with two synchronous-sampling delta-sigma ADCs, selectable 16-bit or 24-bit resolution, internal programmable-gain amplifiers, an internal voltage reference, phase-delay compensation, and an SPI-compatible serial interface. The device is packaged in a 20-pin 4 x 4 mm QFN and supports analog supply voltages of 2.7 V or 4.5 V up to 5.5 V.

An analog front end, or AFE, is the signal-conditioning and conversion interface between a physical analog input and a digital system. In the signal-chain hierarchy, an AFE combines amplifier, converter, reference, and interface functions ahead of a microcontroller or digital controller. The MCP3901 family is designed for dual-channel metering systems in which synchronized sampling, programmable gain, and compact integration simplify energy-meter and sensor-interface designs.

Key features include two independent 24-bit delta-sigma conversion channels, internal programmable-gain amplifiers, an internal voltage reference, and up to 91 dB SINAD according to the Microchip product page. A high-speed SPI-compatible interface operates at up to 20 MHz. The industrial-grade ordering code also identifies a surface-mount 20-terminal square QFN package, while the -I/ML package suffix corresponds to the 4 x 4 mm QFN format.

The synchronous delta-sigma architecture samples both analog channels in a coordinated manner, which is valuable when measuring two related quantities such as voltage and current in a metering application. Internal gain control reduces the need for external analog gain stages, while the internal reference reduces the number of precision components around the converter. The phase-delay compensation block supports systems where coherent measurements are required.

Typical uses include single- and three-phase energy-metering circuits, industrial power monitoring, current-and-voltage sensing, and low-bandwidth sensor acquisition. The two-channel structure allows one AFE to process a voltage input and a current input simultaneously, while the SPI interface allows a host microcontroller to configure conversion parameters and retrieve digital results.

When laying out the circuit, place input and reference-related components close to their associated pins, keep analog and digital return currents separated, and use the manufacturer pin-description table to assign tracks. The available power range and exposed thermal-pad requirements should be reviewed against the worst-case analog input, gain, clock, and ambient conditions rather than inferred from the nominal converter specifications alone.

This page organizes the manufacturer specifications, package details, application guidance, design considerations, and verified drop-in alternatives for engineers comparing the MCP3901A0-I/ML with other dual-channel metering AFEs. It also distinguishes pin-compatible temperature-grade and resolution-mode variants so replacement decisions are based on measurable device differences.

এর জন্য ড্রপ-ইন বিকল্প MCP3901A0-I/ML — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

MCP3901A0-E/ML

✅ ড্রপ-ইন
Microchip Technology
📦 20-pin QFN (HVQCCN), 4 x 4 mm
Dual-channel analog front end (AFE) · Delta-sigma ADC · 2 channels · 16/24 bits · 91 dB · 2 internal PGAs · 1 internal voltage reference · Programmable phase-delay compensation

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MCP3901A0T-I/ML

✅ ড্রপ-ইন
📦 20-pin QFN (HVQCCN), 4 x 4 mm
Same 20-pin QFN footprint, dual-channel AFE architecture, and industrial suffix; the T device identifier denotes a different operating variant, whose 16-bit specification differs from the standard A0 mode.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MCP3901A0T-E/ML

✅ ড্রপ-ইন
📦 20-pin QFN (HVQCCN), 4 x 4 mm
Same 20-pin QFN footprint and dual-channel AFE architecture; the T identifier selects a different conversion variant and the E suffix changes temperature grade, while both retain 16-bit operation.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MCP3901A0-I/ML সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Number of ADC Channels 2 channels
ADC Resolution 16-bit or 24-bit
ADC Architecture Synchronous-sampling delta-sigma ADC
Programmable Gain Amplifiers 2 internal PGAs
Internal Voltage Reference 1 internal voltage reference
Maximum SINAD 91 dB
Phase-Delay Compensation Internal phase-delay compensation block
Digital Interface SPI-compatible serial interface
Maximum SPI Clock Frequency 20 MHz
Minimum Analog Supply Voltage 2.7 V or 4.5 V, depending on configuration
Maximum Analog Supply Voltage 5.5 V
Temperature Grade Industrial
Package Type 20-pin QFN (HVQCCN), 4 x 4 mm
Number of Terminals 20 terminals
মাউন্টিং টাইপ Surface mount
Package Shape Square

MCP3901A0-I/ML square পিন কনফিগারেশন গাইড

MCP3901A0-I/ML (square প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।

MCP3901A0-I/ML-এর জন্য square প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MCP3901A0-I/ML.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

MCP3901A0-I/ML এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Single-Phase Energy Metering, Three-Phase Energy Monitoring, Industrial Power Monitoring, Current and Voltage Sensor Interface, Low-Bandwidth Sensor Acquisition, Smart Meter and Utility Endpoint.

⚡

Single-Phase Energy Metering

The MCP3901A0-I/ML fits single-phase energy meters because it combines two synchronous-sampling delta-sigma ADC channels, internal programmable-gain amplifiers, and an internal voltage reference in one compact 20-pin QFN. The voltage and current inputs can be conditioned directly into the two conversion channels without separate precision gain stages. According to the Microchip product page, the family supports 16-bit or 24-bit conversion and up to 91 dB SINAD, giving a metering controller a high-accuracy, synchronized acquisition path. The SPI-compatible interface supports digital result retrieval and configuration, while phase-delay compensation supports systems requiring coherent current and voltage measurements. Board-level validation should include gain calibration, offset correction, line-frequency rejection, and startup settling before energy totals are accepted by the utility metering firmware.

🏭

Three-Phase Energy Monitoring

The two-channel MCP3901A0-I/ML can support multi-phase monitoring architectures that repeatedly measure a phase voltage and its associated current through synchronized conversion. Its two internal PGAs help bring sensor outputs into the converter range, while the internal voltage reference supports consistent digital results without a separate reference IC. The 20-pin QFN package reduces board area compared with discrete amplifier and converter arrangements. Microchip identifies the MCP3901 family as supporting up to 91 dB SINAD, which is important when preserving low-level information from shunt or sensor signals. For three-phase products, designers should evaluate how the two channels are multiplexed across phase pairs and validate phase-to-phase timing, calibration, and the SPI update schedule in the final meter firmware.

🏭

Industrial Power Monitoring

The MCP3901A0-I/ML is suitable for industrial power-monitoring modules that need accurate acquisition of voltage and current at a centralized monitoring node. The synchronized delta-sigma channels support repeatable dual-signal acquisition, and the internal programmable-gain amplifiers reduce analog front-end complexity when the selected sensors already deliver suitably scaled signals. A maximum SPI clock of 20 MHz allows the host controller to retrieve conversion data efficiently, while the 2.7 V or 4.5 V supply options support integration into mixed-voltage designs when configured as specified. The 4 x 4 mm QFN is useful where panel and DIN-rail module space is constrained. Industrial qualification should also account for ambient temperature, noise immunity, isolated power domains, and the final enclosure rather than relying on the component temperature-grade designation alone.

🔧

Current and Voltage Sensor Interface

When a current sensor and voltage sensor must be measured together, the MCP3901A0-I/ML provides two matched conversion channels behind individual programmable-gain amplifiers. This arrangement is useful for power, power-factor, energy, and system-health calculations where simultaneous acquisition reduces timing uncertainty. The delta-sigma ADCs can operate at 16-bit or 24-bit resolution, allowing the system to trade output rate and processing requirements for numerical resolution. The internal reference and compact QFN package minimize the number of external precision components. Designers should select gain and digital filter settings that preserve headroom for maximum sensor excursions, and they should include calibration for offset, gain, and reference drift to maintain useful accuracy across the complete input range.

🧩

Low-Bandwidth Sensor Acquisition

The MCP3901A0-I/ML can serve as the acquisition front end in low-bandwidth sensing systems that monitor slowly changing analog quantities. Two independent PGAs condition each channel, and the selectable 16-bit or 24-bit delta-sigma conversion provides flexibility between resolution and conversion throughput. The internal reference removes the need for an external reference device in basic measurement paths, while the phase-delay compensation block can assist coherent acquisition when both channels represent related variables. Because the MCP3901 is optimized for metering rather than high-frequency waveform capture, the application should avoid expecting wide-band oscilloscope performance. The signal bandwidth, digital filter response, input impedance, and common-mode range must be checked against the sensor source before setting the sampling and gain configuration.

📡

Smart Meter and Utility Endpoint

The MCP3901A0-I/ML is appropriate for smart-meter endpoints where measurement accuracy, compactness, and host-controller integration are primary requirements. Two 24-bit-capable delta-sigma channels can acquire the voltage and current information used for energy accumulation, while internal gain stages and reference circuitry reduce analog component count. The SPI-compatible interface provides a direct path to a host microcontroller, and the 20-pin QFN supports compact meter-board layouts. Microchip states that the family can achieve up to 91 dB SINAD, providing a useful benchmark for the metering signal path. A production design still needs regional metering-certification testing, calibration traceability, tamper-detection provisions, and communication-security architecture; the converter specification alone does not establish regulatory compliance.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

MCP3901 MCP3901 family device with the same dual-channel AFE architecture ব্যবহৃত হয়: Single-Phase Energy Metering, Three-Phase Energy Monitoring, Industrial Power Monitoring, Current and Voltage Sensor Interface, Low-Bandwidth Sensor Acquisition, Smart Meter and Utility Endpoint MCP3901A0-E/ML Microchip Technology ব্যবহৃত হয়: Single-Phase Energy Metering, Industrial Power Monitoring, Low-Bandwidth Sensor Acquisition MCP3901A0T-I/ML Pin-compatible MCP3901 variant for firmware and mode comparison ব্যবহৃত হয়: Three-Phase Energy Monitoring, Current and Voltage Sensor Interface MCP3901A0T-E/ML Pin-compatible family variant for alternate mode and temperature review ব্যবহৃত হয়: Smart Meter and Utility Endpoint
What is the MCP3901A0-I/ML?
The MCP3901A0-I/ML is a Microchip Technology dual-channel analog front end for precision metering and sensor-measurement systems. According to the manufacturer product page, it contains two synchronous-sampling delta-sigma ADCs, two internal programmable-gain amplifiers, an internal voltage reference, phase-delay compensation, and an SPI-compatible interface. It supports 16-bit or 24-bit conversion resolution and is housed in a 20-pin 4 x 4 mm QFN package.
What is the ADC resolution of MCP3901A0-I/ML?
The MCP3901A0-I/ML supports 16-bit and 24-bit delta-sigma conversion resolution. According to the Microchip MCP3901 product page, the device uses two synchronous-sampling ADC channels and can achieve up to 91 dB SINAD. Resolution mode affects conversion output and data handling, so firmware, calibration coefficients, and timing should be configured consistently with the selected operating mode.
What is the operating voltage of MCP3901A0-I/ML?
The MCP3901A0-I/ML operates from 2.7 V or 4.5 V up to 5.5 V, depending on the selected supply configuration. The manufacturer documentation identifies a minimum analog supply of 2.7 V or 4.5 V and a maximum of 5.5 V. Confirm the specific mode, digital-supply limits, and decoupling requirements in the manufacturer datasheet before designing the power tree.
What can replace MCP3901A0-I/ML?
The MCP3901A0-E/ML and MCP3901A0T-I/ML are pin-compatible replacement candidates for the MCP3901A0-I/ML because they retain the same 20-pin QFN footprint and primary metering-AFE function. The E/ML version changes the temperature grade, while the T-I/ML suffix denotes a different device variant. Verify enable pins, gain configuration, resolution mode, and electrical limits against the manufacturer pin and function tables before production substitution.
Is MCP3901A0-I/ML the same as MCP3901A0-E/ML?
The MCP3901A0-I/ML and MCP3901A0-E/ML use the same MCP3901 family architecture and 20-pin QFN format, but their ordering suffixes indicate different temperature grades. The MCP3901A0-I/ML is identified as industrial grade, while the E/ML variant carries the E temperature designation. Confirm the exact temperature limits and production qualification requirements in the manufacturer datasheet for the selected suffix.
MCP3901A0-I/ML vs MCP3901A0T-I/ML — which should I choose?
Choose the MCP3901A0-I/ML when the standard 24-bit metering-AFE configuration is required, and evaluate MCP3901A0T-I/ML when its specific conversion mode matches the design. Both retain the MCP3901 family integration and 20-pin QFN package, including dual delta-sigma channels, internal PGAs, an internal reference, and an SPI-compatible interface. The T suffix indicates a functional variant, so compare its operating mode and register behavior rather than treating it as an unrestricted pin-for-pin swap.
When should I choose MCP3901A0-I/ML over another dual-channel AFE?
Choose MCP3901A0-I/ML when the design needs two coordinated measurement channels, 16-bit or 24-bit delta-sigma conversion, internal programmable gain, an internal reference, and a compact SPI-connected solution. The manufacturer identifies up to 91 dB SINAD and a 20 MHz serial interface. It is particularly suitable for energy-metering front ends where voltage and current channels must share a controlled acquisition system.
Is MCP3901A0-I/ML suitable for energy-metering applications?
Yes, the MCP3901A0-I/ML is suitable for dual-channel energy-metering front ends. Its two synchronous-sampling delta-sigma ADCs can acquire related voltage and current measurements, while the internal programmable-gain amplifiers and internal reference reduce external conditioning complexity. According to the Microchip product page, the family also includes phase-delay compensation and can reach up to 91 dB SINAD for high-accuracy measurement.
Where can I download the MCP3901A0-I/ML datasheet PDF?
Download the MCP3901 documentation from the official Microchip MCP3901 product page or the linked manufacturer datasheet. The family document describes the synchronous delta-sigma converters, programmable-gain amplifiers, internal reference, phase-delay compensation, supply options, SPI interface, pin descriptions, and electrical characteristics. Use the MCP3901A0-I/ML ordering suffix when checking variant-specific temperature, package, and operating-mode details.
Where can I find the MCP3901A0-I/ML pinout?
The MCP3901A0-I/ML pinout is documented in the pin-description and package-drawing sections of the Microchip MCP3901 datasheet. The component is a 20-terminal, 4 x 4 mm surface-mount QFN, so its exposed thermal pad and all numbered terminals must be accounted for in the PCB footprint. Use the manufacturer pin table to assign supplies, analog inputs, digital interface signals, and exposed-pad connections.
Where can I buy MCP3901A0-I/ML?
Use the Request a Quote form on this page to request MCP3901A0-I/ML availability, current commercial terms, and the required package quantity. The exact MPN is an industrial-grade Microchip 20-pin QFN device, so confirm the ordering suffix, reel configuration, and target delivery quantity when submitting the request. This avoids substituting a different package or conversion variant.
What is the lead time for MCP3901A0-I/ML?
Lead time and current inventory should be requested through the Request a Quote form on this page using the exact MCP3901A0-I/ML ordering code. Because availability can change by package, reel quantity, and production schedule, engineers should request the current delivery window rather than rely on an archived catalog interval. Include the forecast quantity and target date with the inquiry.
Is MCP3901A0-I/ML in stock?
Use the Request a Quote form on this page to request the latest MCP3901A0-I/ML stock position and confirmed allocation. Stock status can vary with package quantity and manufacturing activity, so a current quotation response should be treated as the procurement reference. Specify whether loose quantities, production reels, or scheduled deliveries are required.
How much does MCP3901A0-I/ML cost?
Submit the exact MCP3901A0-I/ML part number through the Request a Quote form on this page for current pricing, volume tiers, and availability. The inquiry should identify the required order quantity and reel or package preference. This ensures the commercial response applies to the industrial 20-pin QFN ordering configuration rather than a different MCP3901 suffix.
What are the key specifications of MCP3901A0-I/ML that engineers should know?
The principal specifications are two ADC channels, 16-bit or 24-bit resolution, internal programmable-gain amplifiers, an internal voltage reference, phase-delay compensation, and a 20 MHz SPI-compatible interface. According to the Microchip product page, the MCP3901 family provides up to 91 dB SINAD. The MCP3901A0-I/ML is an industrial-temperature device in a 20-pin, 4 x 4 mm surface-mount QFN.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MCP3901A0-I/ML — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose MCP3901A0-I/ML for an industrial dual-channel metering design that benefits from selectable 16-bit or 24-bit resolution, two synchronous delta-sigma ADC channels, internal PGAs, an internal reference, phase-delay compensation, and a 20-pin QFN footprint. Select MCP3901A0-E/ML when the same A0 resolution and architecture are needed but the E temperature-grade ordering option is required. Use MCP3901A0T-I/ML or MCP3901A0T-E/ML only after confirming that the 16-bit T variant matches the required conversion mode and firmware behavior. Although the alternatives share the package and family architecture, suffix changes can affect temperature grade, resolution, register behavior, and timing. Validate alternate parts against the exact MCP3901 pin-description table, electrical characteristics, calibration process, and end-product metering accuracy before releasing a substitution to production.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য MCP3901A0-E/ML MCP3901A0T-I/ML MCP3901A0T-E/ML
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 20-pin QFN (HVQCCN), 4 x 4 mm 20-pin QFN (HVQCCN), 4 x 4 mm 20-pin QFN (HVQCCN), 4 x 4 mm 20-pin QFN (HVQCCN), 4 x 4 mm
ADC Channels 2 channels 2 channels 2 channels 2 channels
Resolution 16-bit or 24-bit 16-bit or 24-bit 16-bit 16-bit
ADC Architecture Synchronous-sampling delta-sigma ADC Synchronous-sampling delta-sigma ADC Synchronous-sampling delta-sigma ADC Synchronous-sampling delta-sigma ADC
Programmable Gain Amplifiers 2 internal PGAs 2 internal PGAs 2 internal PGAs 2 internal PGAs
Internal Voltage Reference Yes Yes Yes Yes
Maximum Supply Voltage 5.5 V 5.5 V 5.5 V 5.5 V
Temperature-Grade Suffix I, industrial E temperature grade I, industrial E temperature grade

মূল পার্থক্যসমূহ

  • Supports selectable conversion resolution (বনামMCP3901A0T-I/ML)
  • Combines two synchronized measurement channels and both gain stages (বনামMCP3901A0-E/ML)
  • Retains a compact common metering-AFE footprint (বনামMCP3901A0T-E/ML)

ডিজাইন নোট

Use the manufacturer package drawing to implement the complete 20-terminal 4 x 4 mm QFN footprint, including the exposed pad, thermal vias, and paste pattern. Place input-filter components and decoupling capacitors close to the associated pins, minimize loop area between supply connections and ground, and avoid routing fast SPI traces beneath sensitive analog inputs. Separate analog and digital return paths until they join at the selected grounding point to reduce converter and reference coupling.

Configure both input channels for the same gain and timing assumptions when calculating power, power factor, or other values derived from voltage and current measurements. Verify the input source impedance against the selected PGA mode and anti-alias requirements, and include sensor settling time in the acquisition sequence. Differential and common-mode input limits must be checked with the actual divider, shunt amplifier, and surge-protection network rather than only with the nominal sensor output.

Do not treat the I, E, or T ordering suffixes as interchangeable labels without reviewing the device configuration. The A0T variants are associated with 16-bit operation, while the standard MCP3901 family supports 16-bit or 24-bit resolution. A physical pin-compatible substitution can still require different registers, conversion timing, output coding, or calibration treatment. Run a firmware, timing, and accuracy regression against the exact alternate MPN before approving it as a drop-in replacement.

Estimate the QFN junction temperature from total device dissipation, package thermal resistance, board copper, and ambient temperature under the worst operating condition. The AFE's supply current and digital-interface activity affect thermal load, while the exposed pad is the principal heat-transfer path. Use thermal vias and sufficient copper area, and confirm the manufacturer's maximum operating temperature for the exact suffix rather than assuming all MCP3901 variants have identical limits.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact ordering code. Use the manufacturer product documentation and declarations for compliance assessment.

ডেটা যাচাই করা হয়েছে: 2026-11-15 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

MCP3901A0-I/ML MCP3901A0-I/ML datasheet MCP3901A0-I/ML datasheet pdf MCP3901A0-I/ML pinout MCP3901A0-I/ML equivalent MCP3901A0-I/ML replacement MCP3901A0-I/ML price MCP3901A0-I/ML stock Microchip MCP3901A0-I/ML MCP3901A0-I/ML QFN-20 MCP3901A0-I/ML energy metering MCP3901A0-I/ML vs MCP3901A0-E/ML MCP3901A0-I/ML application circuit MCP3901A0-I/ML cross reference

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Microchip Technology MCP3901A0-I/ML MCP3901A0-E/ML MCP3901A0T-I/ML MCP3901A0T-E/ML MCP3901 analog front end AFE delta-sigma ADC analog-to-digital converter programmable-gain amplifier PGA internal voltage reference phase-delay compensation SPI-compatible serial interface energy metering SINAD QFN-20 HVQCCN surface mount semiconductor single-phase energy meter industrial power monitoring
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন